Imported Upstream version 2.7.2

This commit is contained in:
Laurent Bigonville 2014-04-22 20:39:47 +02:00
parent 0121794af9
commit a356b56d11
263 changed files with 6039 additions and 8151 deletions

471
ChangeLog
View File

@ -1,3 +1,474 @@
2014-04-17 Arnaud Quette <arnaud.quette@free.fr>
* NEWS, UPGRADING, configure.ac: Update for release 2.7.2 Complete
the release information for NUT 2.7.2
2014-04-07 Arnaud Quette <arnaud.quette@free.fr>
* drivers/compaq-mib.c: Fix erroneous status in HP/Compaq SNMP MIB
Using the most recent HP firmware (1.76), erroneous on-battery
status were reported. Also disable an erroneous low-battery
definition (pointing nowhere), while waiting for actual
improvements (report and patch from Philippe Andersson ; Closes
networkupstools/nut#117)
2014-04-06 Daniele Pezzini <hyouko@gmail.com>
* drivers/mge-xml.c: mge-xml: fix compile-time warnings, versioning
2014-04-05 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: Numeric Digital 800 plus USB VID:PID =
0665:5161 Reference: networkupstools/nut#115 (blazer_usb @ 2.6.4;
waiting for confirmation with nutdrv_qx)
* data/driver.list.in: HCL: Eaton Powerware 3105 supported by
bcmxcp_usb Closes networkupstools/nut#117
* data/driver.list.in, drivers/belkin-hid.c: usbhid-ups/belkin-hid:
add support for Emerson Network Power Liebert PSI 1440 USB VID:PID
= 10af:0004
http://article.gmane.org/gmane.comp.monitoring.nut.user/8479
2014-04-05 Arnaud Quette <arnaud.quette@free.fr>
* drivers/al175.c: Fix data format warnings on all architectures
Complete commit 7daa0feb6ed4f1c29bfe14c8e491ba198a4ba643, and
actually fix some of the warnings related data format. Also bump
al175 driver revision
* clients/Makefile.am: Update libupsclient library version
information Following the recent export of libcommon functions in
libupsclient, update the library version information to 4:0:0
2014-04-04 Arnaud Quette <arnaud.quette@free.fr>
* drivers/al175.c: Fix data format warnings Fix a few warnings
related data format, in debug code
* clients/Makefile.am: Add libnutclient library version information
Add the missing LDFLAGS for adding version information
2014-03-21 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in: [HCL] CABAC UPS-1700DV2 supported by
blazer_usb Reported by jammin84 Closes #113
* clients/Makefile.am, common/Makefile.am: Link libupsclient with
libcommon Fix undefined references related to functions of
libcommon. This issue was reported on Debian:
https://bugs.debian.org/731156 (patch from Matthias Klose ; Closes
Github issue #73)
2014-03-18 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: [HCL] Digitus DN-170014 supported by
richcomm_usb Reference: http://lists.alioth.debian.org/pipermail
/nut-upsdev/2014-March/006695.html -or- http://news.gmane.org/find-
root.php?message_id=CADq9dvWMx0xBz9XXkVKXCre4ox%2d2kSeHtD7LW39eEDH1
RCY8sQ%40mail.gmail.com
2014-03-05 Charles Lepple <clepple+nut@gmail.com>
* UPGRADING: Added note about --enable-option-checking=fatal Closes
#99 (really)
2014-03-03 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: various updates * Closes
https://github.com/networkupstools/nut/issues/107
* http://lists.alioth.debian.org/pipermail/nut-
upsdev/2013-November/006564.html * http://news.gmane.org/find-
root.php?message_id=50D9D460.1080408%40gmail.com
* http://news.gmane.org/find-root.php?message_id=CA%2b4duQ%3dppW%2
bPz%2bRVPVXJyFLj0HErh1ZOtm5tk8b6n5Nd5kSk0g%40mail.gmail.com *
http://news.gmane.org/find-
root.php?message_id=528EC53C.9000801%40me.com
* docs/nut-qa.txt: NUT QA document: updated and reworded
* docs/nut-qa.txt: NUT QA document: CR->LF
* docs/FAQ.txt: FAQ: minor updates Update the bestfortress entry,
fix the mythicbeasts URL, and reword a few entries.
2014-02-13 Charles Lepple <clepple+nut@gmail.com>
* docs/man/upsimage.cgi.txt: upsimage.cgi(8): update GD homepage
2014-03-03 Émilien Kia <emilien.kia@gmail.com>
* drivers/nutdrv_qx.h: Detect if TRUE (and FALSE) are already defined
and define bool_t accordingly.
2014-02-27 Arnaud Quette <arnaud.quette@free.fr>
* UPGRADING: Add a note on Hardware Abstraction Layer removal
* INSTALL.nut, autogen.sh, configure.ac, docs/Makefile.am,
docs/configure.txt, docs/developers.txt, docs/features.txt,
docs/macros.txt, docs/new-drivers.txt, docs/nut-hal.txt, docs
/packager-guide.txt, drivers/Makefile.am, drivers/dstate-hal.c,
drivers/dstate-hal.h, drivers/main-hal.c, drivers/main-hal.h,
m4/nut_check_libhal.m4, m4/nut_config_libhal.m4: Remove the
remaining HAL files and references Remove the remaining build
rules, source code and documentation related to the FreeDesktop
Hardware Abstraction Layer (HAL) support. For the record, with this
HAL implementation, NUT drivers were sending data over DBus
(Closes: #99)
2014-02-24 Charles Lepple <clepple+nut@gmail.com>
* drivers/blazer_usb.c, drivers/libusb.c, drivers/nutdrv_qx.c,
drivers/riello_usb.c, drivers/usbhid-ups.c: OpenBSD ports tree
patches for EPROTO Closes networkupstools/nut#44
2014-02-26 Arnaud Quette <arnaud.quette@free.fr>
* scripts/Makefile.am, scripts/README, scripts/hal/.gitignore,
scripts/hal/Makefile.am, tools/nut-usbinfo.pl: Remove the
generation of HAL support files Remove the code supporting the
generation of HAL FDI file. This is the first commit of a set to
address Github issue #99
* drivers/snmp-ups.c: Fix snmp-ups segmentation fault A basic sanity
check was missing in the core code of snmp-ups, causing a driver
crash under some specific circumstances, at driver initialisation
time. Hence, this does not affect production systems
* README, UPGRADING, docs/FAQ.txt, docs/config-notes.txt,
drivers/Makefile.am, scripts/Solaris/nut.in,
scripts/Solaris/postinstall.in, scripts/Solaris/preremove.in,
scripts/systemd/nut-driver.service.in,
scripts/systemd/nutshutdown.in: Closes #96: Install upsdrvctl to
$prefix/sbin Install upsdrvctl to $prefix/sbin rather than
$driverexec. upsdrvctl has been historically standing beside the
drivers. It now resides in the system binaries ($prefix/sbin)
directory
2014-02-25 Arnaud Quette <arnaud.quette@free.fr>
* drivers/mge-hid.c: Add improved support for Eaton 5P Add the
necessary hooks to improve support for Eaton 5P range. This
includes post-processing of the model name, along with handling
rules for battery voltage (actual and nominal)
2014-02-19 Daniele Pezzini <hyouko@gmail.com>
* docs/Makefile.am, docs/chunked.xsl, docs/common.xsl,
docs/xhtml.xsl: docs: prevent smartphones from being too smart
(docbook) Add HTML <meta> tag to not auto-create telephone number
links on mobile browsers also in docbook processed documents.
Reference: https://github.com/networkupstools/nut/issues/78 XSL
files source: - https://github.com/asciidoc/asciidoc/blob/master
/docbook-xsl/common.xsl -
https://github.com/asciidoc/asciidoc/blob/master/docbook-
xsl/xhtml.xsl - https://github.com/asciidoc/asciidoc/blob/master
/docbook-xsl/chunked.xsl
* docs/man/asciidoc.conf: docs: prevent smartphones from being too
smart Add HTML <meta> tag to not auto-create telephone number
links on mobile browsers. Reference:
https://github.com/networkupstools/nut/issues/78
2014-02-15 Arnaud Quette <arnaud.quette@free.fr>
* docs/acknowledgements.txt: Update NUT team membership for Daniele
Pezzini Daniele Pezzini is a now a NUT senior developer
2014-02-14 Arnaud Quette <arnaud.quette@free.fr>
* docs/acknowledgements.txt, docs/website/news.txt: Formalizing the
end of the relationship with Eaton The situation of the
relationship with Eaton has evolved, and since 2011 Eaton does not
support NUT anymore. This may still evolve in the future. But for
now, please do not consider anymore that buying Eaton products will
provide you with official support from Eaton, or a better level of
device support in NUT.
2014-02-14 Charles Lepple <clepple+nut@gmail.com>
* Makefile.am: devd: use staging directory for distcheck
* drivers/Makefile.am, drivers/snmp-ups.c, drivers/xppc-mib.c,
drivers/xppc-mib.h: snmp-ups: add XPPC-MIB for Tripp Lite
SU10KRT3/1X
* scripts/subdriver/gen-snmp-subdriver.sh: gen-snmp-subdriver.sh:
documentation updates
2014-02-10 Charles Lepple <clepple+nut@gmail.com>
* scripts/subdriver/gen-snmp-subdriver.sh: gen-snmp-subdriver.sh: fix
option typos * Use '-M' for MIB directories, to match snmpwalk and
the help text. * Add space before '-c' in snmpwalk (not sure how
this worked before)
* scripts/Makefile.am: cosmetic: Indent scripts/Makefile.am
EXTRA_DIST continuation lines
* scripts/Makefile.am: Add gen-snmp-subdriver.sh to distribution
tarball
2014-02-14 Arnaud Quette <arnaud.quette@free.fr>
* docs/acknowledgements.txt: Update NUT team membership for
Frédéric Bohe Frederic Bohe, NUT senior developer and Eaton
contractor from 2009 to 2013, is now a retired member. Thanks for
all the hard work on the Windows port, nut-scanner, Unix packaging,
support, ... Also update the developers membership page, from
Alioth to GitHub
2013-02-24 Charles Lepple <clepple+nut@gmail.com>
* autogen.sh, configure.ac, scripts/Makefile.am,
scripts/devd/.gitignore, scripts/devd/Makefile.am,
scripts/devd/README, tools/nut-usbinfo.pl: FreeBSD: generate
devd.conf files for USB UPSes This adds a --with-devd-dir=PATH
option to ./configure, which defaults to /usr/local/etc/devd (or
/etc/devd, whichever is found first). Unlike udev, there does not
seem to be a way to re-trigger rules at runtime. This means you
will likely need to unplug and replug your UPS after installing the
new nut-usb.conf file.
2014-02-13 Arnaud Quette <arnaud.quette@free.fr>
* .gitignore, server/.gitignore: Minor completion to gitignore files
Add a few more exotic targets, related to debug or official
distribution
2014-02-11 Daniele Pezzini <hyouko@gmail.com>
* .gitignore, clients/.gitignore, common/.gitignore, conf/.gitignore,
data/.gitignore, data/html/.gitignore, docs/.gitignore,
docs/man/.gitignore, docs/website/.gitignore,
docs/website/scripts/.gitignore, drivers/.gitignore,
include/.gitignore, lib/.gitignore, m4/.gitignore,
scripts/.gitignore, scripts/HP-UX/.gitignore,
scripts/Solaris/.gitignore, scripts/augeas/.gitignore,
scripts/avahi/.gitignore, scripts/hal/.gitignore,
scripts/hotplug/.gitignore, scripts/python/.gitignore,
scripts/systemd/.gitignore, scripts/udev/.gitignore,
scripts/ufw/.gitignore, server/.gitignore, tests/.gitignore,
tools/.gitignore, tools/nut-scanner/.gitignore: Simplify gitignore
files Remove redundancies and old/svn things. Limit the scope
wherever it makes sense. Ignore all cscope files and test logs.
Make ignoring generated files easier to maintain.
2014-02-11 Charles Lepple <clepple+nut@gmail.com>
* drivers/libshut.c: libshut: partially revert PnP/RTS change
Reported by Baruch Even. It is unclear how this will work after
running nut-scanner, but it is more important to keep the drivers
working. Reference: 65db105 /
2013-09-24T08:18:00Z!fredericbohe@eaton.com Closes:
networkupstools/nut#91
2014-02-09 Daniele Pezzini <hyouko@gmail.com>
* docs/man/nutdrv_qx.txt: nutdrv_qx: update manpage for the newly
supported Voltronic Power P98 units
* drivers/nutdrv_qx.c, drivers/nutdrv_qx_mecer.c,
drivers/nutdrv_qx_mecer.h: nutdrv_qx: improve support for
'(ACK/(NAK' and Voltronic Power P98 UPSes In 'mecer' subdriver's
claim function try to get protocol (QPI, for Voltronic Power
devices) used by the UPS: - supported devices are Voltronic Power's
P98 units - if the UPS doesn't support the QPI command, use its
reply to identify whether it uses '(ACK\r'/'(NAK\r' replies This
way we can catch '(ACK/(NAK' devices, while previously the 'mecer'
subdriver was 'hidden' by the 'megatec' (echo back/'ACK/NAK') one.
Plus Q1 units with 'ACK'/'NAK' replies or echoing back not
supported and rejected commands are no longer wrongly 'claimed' by
the 'mecer' subdriver.
2014-02-03 Daniele Pezzini <hyouko@gmail.com>
* docs/.gitignore, docs/Makefile.am, docs/documentation.txt: docs:
build PDF also for cables.txt
2014-02-02 Daniele Pezzini <hyouko@gmail.com>
* Makefile.am, configure.ac, docs/.gitignore, docs/Makefile.am,
docs/man/.gitignore, docs/man/Makefile.am, docs/stable-hcl.txt,
docs/user-manual.txt, docs/website/.gitignore,
docs/website/Makefile.am, docs/website/css/ie-overrides.css,
docs/website/css/web-layout.css,
docs/website/css/xhtml11-quirks.css, docs/website/css/xhtml11.css,
docs/website/faviconut.ico, docs/website/faviconut.png,
docs/website/news.txt, docs/website/old-news.txt,
docs/website/projects.txt, docs/website/scripts/.gitignore,
docs/website/scripts/filter_png.js, docs/website/scripts/jquery.js,
docs/website/scripts/nut_jquery.js, docs/website/scripts/toc.js,
docs/website/ups-protocols.txt, docs/website/web-layout.conf,
docs/website/website.txt, tools/Makefile.am, tools/nut-hclinfo.py:
website: move to a standalone website
2014-01-18 Daniele Pezzini <hyouko@gmail.com>
* docs/net-protocol.txt: docs: fix a couple of asciidoc errors in
net-protocols.txt
* server/netlist.c: net-protocol: fix closing line of LIST RANGE
2014-01-16 Charles Lepple <clepple+nut@gmail.com>
* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: fix permissions-based
crash, and enable vendor variable (1.1)
2014-01-13 Charles Lepple <clepple+nut@gmail.com>
* .gitignore: Ignore cscope.out
* docs/man/.gitignore, docs/man/nutdrv_atcl_usb.txt,
drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: documentation and
logging (v1.0)
2014-01-11 Charles Lepple <clepple+nut@gmail.com>
* drivers/apc-mib.c: snmp-ups: APC SmartBoost and SmartTrim are OL
SmartBoost and SmartTrim are voltage regulation functions that
prevent the UPS from using the battery during brownouts and
overvoltages, so the BOOST and TRIM states are also mapped to OL.
Reference:
http://article.gmane.org/gmane.comp.monitoring.nut.devel/6583
* data/driver.list.in: [HCL] MicroDowell B.Box LP 500: genericups
type 7 Closes networkupstools/nut#83 From @lxp: UPS shutdown
only works when on-battery and has a delay of about 1min until
execution (something between 50sec to 1min 30sec on mine).
References: http://www.ezdirect.it/pdf/lp500.pdf
https://forums.gentoo.org/viewtopic-t-730172-start-0.html
2014-01-11 Daniele Pezzini <hyouko@gmail.com>
* drivers/blazer_ser.c, drivers/blazer_usb.c: blazer: fix man page
references
2014-01-11 Charles Lepple <clepple+nut@gmail.com>
* docs/man/nutdrv_atcl_usb.txt, drivers/nutdrv_atcl_usb.c:
nutdrv_atcl: match iManufacturer (vendor) string
* docs/man/snmp-ups.txt: snmp-ups: update and edit documentation
2014-01-11 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in: HCL: add Atlantis Land/Voltronic Power units
supported by nutdrv_qx
* drivers/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-
common.h: nutdrv_qx: fix nutdrv_qx_blazer-common.{c,h} header
comments
* docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx:
update manuals for new 'voltronic-qs' subdriver
2013-12-05 Daniele Pezzini <hyouko@gmail.com>
* drivers/Makefile.am, drivers/nutdrv_qx.c, drivers
/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_voltronic-qs.h:
nutdrv_qx: add Voltronic-QS subdriver (nutdrv_qx protocol
=voltronic-qs) A subdriver using a protocol, specific to UPSes
manufactured by Voltronic Power, based on the 'mustek' one (i.e.
'QS').
2014-01-01 Charles Lepple <clepple+nut@gmail.com>
* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: adjusted logging and
retries (v0.02)
* data/driver.list.in, docs/man/Makefile.am, docs/man/index.txt,
docs/man/nutdrv_atcl_usb.txt: nutdrv_atcl_usb: man page and HCL
entries
2013-12-31 Charles Lepple <clepple+nut@gmail.com>
* drivers/.gitignore, drivers/Makefile.am, drivers/nutdrv_atcl_usb.c,
tools/nut-usbinfo.pl: nutdrv_atcl_usb: 'ATCL FOR UPS' new driver
Reference: http://news.gmane.org/find-
root.php?message_id=%3c52B4C54E.1050106%40ariwainer.com.ar%3e
* drivers/libusb.c, drivers/usb-common.h: Move USB_TIMEOUT to usb-
common.h
2013-12-31 Laurent Bigonville <bigon@bigon.be>
* .gitignore, INSTALL, INSTALL.nut, Makefile.am, docs/FAQ.txt,
docs/Makefile.am, docs/configure.txt, docs/packager-guide.txt, docs
/user-manual.txt: Rename INSTALL to INSTALL.nut Rename it to
INSTALL.nut so autoreconf will not try to overwrite it. In Debian
tools like dh_autoreconf calls autoreconf with -f which overwrite
the INSTALL file.
2013-12-27 Charles Lepple <clepple+nut@gmail.com>
* scripts/subdriver/gen-usbhid-subdriver.sh: usbhid-ups: fix call to
is_usb_device_supported() The is_usb_device_supported() function
now takes a USBDevice_t* instead of a pair of USB ID values.
2013-12-22 Florian Bruhin <nut@the-compiler.org>
* data/driver.list.in, docs/man/powercom.txt, drivers/powercom.c: Add
OptiUPS VS 575C support to PowerCom Reference:
http://news.gmane.org/find-
root.php?message_id=%3c20131126085646.GM28832%40lupin%3e
2013-12-11 Denis Yantarev <denis.yantarev@gmail.com>
* drivers/blazer_usb.c, drivers/nutdrv_qx.c: Fixed incorrectly
reported Ippon response length
2013-11-30 Daniele Pezzini <hyouko@gmail.com>
* docs/man/nutdrv_qx.txt, drivers/nutdrv_qx.c, drivers
/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-common.h,
drivers/nutdrv_qx_megatec-old.c, drivers/nutdrv_qx_mustek.c,
drivers/nutdrv_qx_q1.c: nutdrv_qx: fix 'megatec/old' and 'mustek'
subdrivers' claim functions Address, for 'megatec/old' and
'mustek' subdrivers, the same problem fixed in commit
720975f4de910b270ba705a7f2981c2ee33ca2eb for Q1-based ones: - Make
the claim function of 'megatec/old' and 'mustek' subdrivers not
poll the UPS for 'vendor' informations as they are not really
needed to set these protocols apart from the other ones (i.e. the
'status' poll is specific enough, at the time of writing). - Move
common 'light' claim function to nutdrv_qx_blazer-common.{c,h}. -
Update manual. - Versioning.
2013-11-24 Daniele Pezzini <hyouko@gmail.com>
* docs/nutdrv_qx-subdrivers.txt: nutdrv_qx: improve developer manual
Get rid of useless tables. Fix minor errors/typos.
* drivers/nutdrv_qx.c: nutdrv_qx: versioning
* docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx:
update manuals for new Q1 subdriver and improve readability
2013-11-23 Daniele Pezzini <hyouko@gmail.com>
* drivers/Makefile.am, drivers/nutdrv_qx.c, drivers/nutdrv_qx_q1.c,
drivers/nutdrv_qx_q1.h: nutdrv_qx: add new 'fallback' Q1 subdriver
Add new 'Q1' subdriver. This subdriver implements the same protocol
as the one used by the 'megatec' subdriver minus the vendor (I) and
ratings (F) queries. In the claim function: - it doesn't even try
to get 'vendor' informations (I) - it checks only status (Q1),
through 'input.voltage' variable Therefore it should be able to
work even if the UPS doesn't support vendor/ratings *and* the user
doesn't use the 'novendor'/'norating' flags, as long as: - the UPS
replies a Q1-compliant answer (i.e. not necessary filled with all
of the Q1-required data, but at least of the right length and with
not available data filled with some replacement character) - the
UPS reports a valid input.voltage (used in the claim function) -
the UPS reports valid status bits (1st, 2nd, 3rd, 6th, 7th are the
mandatory ones) This commit reintroduces a functionality of the
blazer subdrivers that was lost because now, in order to tell
whether a device is supported by a subdriver or not, if the user
doesn't call the driver with the 'novendor' flag, both the status
(Q1) and the vendor (I/FW?) queries are needed (that's to better
discern the subdrivers). Reference:
http://lists.alioth.debian.org/pipermail/nut-
upsuser/2013-November/008692.html
2013-11-23 Charles Lepple <clepple+nut@gmail.com>
* configure.ac, configure.in: Rename configure.in to configure.ac
autoconf has been warning about this for a while - let's fix it
before too many branches get created with the old name.
* configure.in: configure.in: bump version to 2.7.1.5 Some packaging
systems don't like the -pre# system.
2013-11-21 Laurent Bigonville <bigon@bigon.be>
* docs/man/ups.conf.txt, docs/man/upsdrvctl.txt, drivers/upsdrvctl.c:
Provide retry options for upsdrvctl and driver(s) As recently seen
in Debian (bugs #694717 and #677143), it may be required to have
upsdrvctl retrying to start the driver in case of failure. More
specifically, a mix of init system (V and systemd), udev and USB
device(s) can result in the /dev entry not being available at
driver startup, thus resulting in a general failure to start NUT.
This commit provides at least a way to overcome this issue. A more
suitable solution will require more work on NUT design. This
patch if based on Arnaud Quette proposal
2013-11-20 Arnaud Quette <arnaud.quette@free.fr>
* Makefile.am: Maintainers targets: distribution signature / hashes
Create some handy targets to ease and automate release publication
2013-11-19 Charles Lepple <clepple+nut@gmail.com>
* configure.in: configure: update version to 2.7.1

646
INSTALL
View File

@ -1,320 +1,370 @@
Installation instructions
=========================
Installation Instructions
*************************
Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without warranty of any kind.
Basic Installation
==================
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package. Some packages provide this
`INSTALL' file but do not implement all of the features documented
below. The lack of an optional feature in a given package is not
necessarily a bug. More recommendations for GNU packages can be found
in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
user, and only the `make install' phase executed with root
privileges.
5. Optionally, type `make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
regular user, particularly if the prior `make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
7. Often, you can also type `make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
8. Some packages, particularly those that use Automake, provide `make
distcheck', which can by used by developers to test that all other
targets like `make install' and `make uninstall' work correctly.
This target is generally not run by end users.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'. This
is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
"universal" binaries--by specifying multiple `-arch' options to the
compiler but only a single `-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CPP="gcc -E" CXXCPP="g++ -E"
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
using the `lipo' tool if you have problems.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them. In general, the
default for these options is expressed in terms of `${prefix}', so that
specifying just `--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
correct locations to `configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
`make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
affected directory. For example, `make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
`${prefix}'. Any directories that were specified during `configure',
but not in terms of `${prefix}', must each be overridden at install
time for the entire installation to be relocated. The approach of
makefile variable overrides for each directory variable is required by
the GNU Coding Standards, and ideally causes no recompilation.
However, some platforms have known limitations with the semantics of
shared libraries that end up requiring recompilation when using this
method, particularly noticeable in packages that use GNU Libtool.
The second method involves providing the `DESTDIR' variable. For
example, `make install DESTDIR=/alternate/directory' will prepend
`/alternate/directory' before all installation names. The approach of
`DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
when some directory options were not specified in terms of `${prefix}'
at `configure' time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
execution of `make' will be. For these packages, running `./configure
--enable-silent-rules' sets the default to minimal output, which can be
overridden with `make V=1'; while running `./configure
--disable-silent-rules' sets the default to verbose, which can be
overridden with `make V=0'.
Particular systems
==================
On HP-UX, the default C compiler is not ANSI C compatible. If GNU
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
HP-UX `make' updates targets which have the same time stamps as
their prerequisites, which makes it generally unusable when shipped
generated files such as `configure' are involved. Use GNU `make'
instead.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `<wchar.h>' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
to try
./configure CC="cc"
and if that doesn't work, try
./configure CC="cc -nodtk"
On Solaris, don't put `/usr/ucb' early in your `PATH'. This
directory contains several dysfunctional programs; working variants of
these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
in your `PATH', put it _after_ `/usr/bin'.
On Haiku, software installed for all users goes in `/boot/common',
not `/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
There may be some features `configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, `configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS
KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
This chapter describe the various methods for installing Network UPS Tools.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Whenever it is possible, prefer <<Installing_packages, installing from packages>>.
Packagers have done an excellent and hard work at improving NUT integration into
their system.
Sharing Defaults
================
[[Installing_source]]
Installing from source
----------------------
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
These are the essential steps for compiling and installing this software.
Defining Variables
==================
The NUT linkdoc:packager-guide[Packager Guide], which presents the best
practices for installing and integrating NUT, is also a good reading.
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
[NOTE]
.Keep in mind that...
================================================================================
./configure CC=/usr/local2/bin/gcc
- the paths shown below are the default values you get by just calling
configure by itself. If you have used --prefix or similar, things will be
different. Also, if you didn't install this program from source yourself, the
paths will probably have a number of differences.
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
- by default, your system probably won't find the man pages, since they
install to /usr/local/ups/man. You can fix this by editing your MANPATH, or
just do this:
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf bug. Until the bug is fixed you can use this workaround:
man -M /usr/local/ups/man <man page>
CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
- if your favorite system offers up to date binary packages, you should always
prefer these over a source installation. Along with the known advantages of such
systems for installation, upgrade and removal, there are many integration issues
that have been addressed.
`configure' Invocation
======================
================================================================================
`configure' recognizes the following options to control how it
operates.
`--help'
`-h'
Print a summary of all of the options to `configure', and exit.
Prepare your system
~~~~~~~~~~~~~~~~~~~~
`--help=short'
`--help=recursive'
Print a summary of the options unique to this package's
`configure', and exit. The `short' variant lists options used
only in the top level, while the `recursive' variant lists options
also present in any nested packages.
System User creation
^^^^^^^^^^^^^^^^^^^^
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
Create at least one system user and a group for running this software. You
might call them "ups" and "nut". The exact names aren't important as
long as you are consistent.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
The process for doing this varies from one system to the next, and
explaining how to add users is beyond the scope of this document.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
For the purposes of this document, the user name and group name
will be 'ups' and 'nut' respectively.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
Be sure the new user is a member of the new group! If you forget to
do this, you will have problems later on when you try to start upsd.
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--prefix=DIR'
Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
Build and install
~~~~~~~~~~~~~~~~~
`--no-create'
`-n'
Run the configure checks, but stop before creating any output
files.
[[Configuration]]
Configuration
^^^^^^^^^^^^^
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
Configure the source tree for your system. Add the '--with-user' and
'--with-group' switch to set the user name and group that you created
above.
./configure --with-user=ups --with-group=nut
If you need any other switches for configure, add them here. For example:
* to build and install USB drivers, add '--with-usb' (note that you
need to install libusb development package or files).
* to build and install SNMP drivers, add '--with-snmp' (note that
you need to install libsnmp development package or files).
* to build and install CGI scripts, add '--with-cgi'.
See <<Configure_options,Configure options>> from the User Manual,
docs/configure.txt or './configure --help' for all the available
options.
If you alter paths with additional switches, be sure to use those
new paths while reading the rest of the steps.
Reference: <<Configure_options,Configure options>> from the
User Manual.
Build the programs
^^^^^^^^^^^^^^^^^^
make
This will build the NUT client and server programs and the
selected drivers. It will also build any other features that were
selected during <<Configuration,configuration>> step above.
Installation
^^^^^^^^^^^^
[NOTE]
=====================================================================
you should now gain privileges for installing software if necessary:
su
=====================================================================
Install the files to a system level directory:
make install
This will install the compiled programs and man pages, as well as
some data files required by NUT. Any optional features selected
during configuration will also be installed.
This will also install sample versions of the NUT configuration
files. Sample files are installed with names like ups.conf.sample
so they will not overwrite any existing real config files you may
have created.
If you are packaging this software, then you will probably want to
use the DESTDIR variable to redirect the build into another place,
i.e.:
make DESTDIR=/tmp/package install
make DESTDIR=/tmp/package install-conf
[[StatePath]]
State path creation
^^^^^^^^^^^^^^^^^^^
Create the state path directory for the driver(s) and server to use
for storing UPS status data and other auxiliary files, and make it
owned by the user you created.
mkdir -p /var/state/ups
chmod 0770 /var/state/ups
chown root:nut /var/state/ups
[[Ownership]]
Ownership and permissions
^^^^^^^^^^^^^^^^^^^^^^^^^
Set ownership data and permissions on your serial or USB ports
that go to your UPS hardware. Be sure to limit access to just
the user you created earlier.
These examples assume the second serial port (ttyS1) on a typical
Slackware system. On FreeBSD, that would be cuaa1. Serial ports
vary greatly, so yours may be called something else.
chmod 0660 /dev/ttyS1
chown root:nut /dev/ttyS1
////////////////////////////////////////////////////////////////////////////////
FIXME: TBR
////////////////////////////////////////////////////////////////////////////////
The setup for USB ports is slightly more complicated. Device files
for USB devices, such as /proc/bus/usb/002/001, are usually
created "on the fly" when a device is plugged in, and disappear
when the device is disconnected. Moreover, the names of these
device files can change randomly. To set up the correct
permissions for the USB device, you may need to set up (operating
system dependent) hotplugging scripts. Sample scripts and
information are provided in the scripts/hotplug and
scripts/udev directories. For most users, the hotplugging scripts
will be installed automatically by "make install".
(If you want to try if a driver works without setting up
hotplugging, you can add the "-u root" option to upsd, upsmon, and
drivers; this should allow you to follow the below
instructions. However, don't forget to set up the correct
permissions later!).
NOTE: if you are using something like devfs or udev, make sure
these permissions stay set across a reboot. If they revert to the
old values, your drivers may fail to start.
You are now ready to configure NUT, and start testing and using it.
You can jump directly to the <<Configuration_notes,NUT configuration>>.
[[Installing_packages]]
Installing from packages
------------------------
This chapter describes the specific installation steps when using
binary packages that exist on various major systems.
[[Debian]]
Debian, Ubuntu and other derivatives
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE: NUT is packaged and well maintained in these systems.
The official Debian packager is part of the NUT Team.
Using your prefered method (apt-get, aptitude, Synaptic, ...), install
the 'nut' package, and optionaly the following:
- 'nut-cgi', if you need the CGI (HTML) option,
- 'nut-snmp', if you need the snmp-ups driver,
- 'nut-xml', for the netxml-ups driver,
- 'nut-powerman-pdu', to control the PowerMan daemon (PDU management)
- 'nut-dev', if you need the development files.
////////////////////////////////////////////////////////////////////////////////
- nut-client
- nut-hal-drivers
////////////////////////////////////////////////////////////////////////////////
Configuration files are located in /etc/nut.
linkman:nut.conf[5] must be edited to be able to invoke /etc/init.d/nut
NOTE: Ubuntu users can access the APT URL installation by clicking on link:apt://nut[this link].
[[Mandriva]]
Mandriva
~~~~~~~~
NOTE: NUT is packaged and well maintained in these systems.
The official Mandriva packager is part of the NUT Team.
Using your prefered method (urpmi, RPMdrake, ...), install one of the two below
packages:
- 'nut-server' if you have a 'standalone' or 'netserver' installation,
- 'nut' if you have a 'netclient' installation.
Optionaly, you can also install the following:
- 'nut-cgi', if you need the CGI (HTML) option,
- 'nut-devel', if you need the development files.
[[Suse]]
Suse / Opensuse
~~~~~~~~~~~~~~~
NOTE: NUT is packaged and well maintained in these systems.
The official Suse packager is part of the NUT Team.
Install the 'nut-classic' package, and optionaly the following:
- 'nut-drivers-net', if you need the snmp-ups or the netxml-ups drivers,
- 'nut-cgi', if you need the CGI (HTML) option,
- 'nut-devel', if you need the development files,
NOTE: Suse and Opensuse users can use the
link:http://software.opensuse.org/search?baseproject=ALL&p=1&q=nut[one-click install method]
to install NUT.
[[RedHat]]
Red Hat, Fedora and CentOS
~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE: NUT is packaged and well maintained in these systems.
The official Red Hat packager is part of the NUT Team.
Using your prefered method (yum, Add/Remove Software, ...), install one of the
two below packages:
- 'nut' if you have a 'standalone' or 'netserver' installation,
- 'nut-client' if you have a 'netclient' installation.
Optionaly, you can also install the following:
- 'nut-cgi', if you need the CGI (HTML) option,
- 'nut-xml', if you need the netxml-ups driver,
- 'nut-devel', if you need the development files.
[[FreeBSD]]
FreeBSD
~~~~~~~
You can either install NUT as a binary package or as a port.
Binary package
^^^^^^^^^^^^^^
To install the main component, use the following command:
# pkg_add -r nut
Port
^^^^
The port is located under /usr/ports/sysutils/nut.
To install it, use the following command:
# cd /usr/ports/sysutils/nut/ && make install clean
You have to define WITH_NUT_CGI to build the optional CGI scripts.
Optionaly, you can also install the following ports:
- sysutils/nut-snmp, for the SNMP driver,
- sysutils/nut-usb, for the USB drivers,
- sysutils/nut-libupsclient, for the upsclient library.
You are now ready to configure NUT, and start testing and using it.
You can jump directly to the
<<Configuration_notes,NUT configuration>>.

319
INSTALL.nut Normal file
View File

@ -0,0 +1,319 @@
Installation instructions
=========================
This chapter describe the various methods for installing Network UPS Tools.
Whenever it is possible, prefer <<Installing_packages, installing from packages>>.
Packagers have done an excellent and hard work at improving NUT integration into
their system.
[[Installing_source]]
Installing from source
----------------------
These are the essential steps for compiling and installing this software.
The NUT linkdoc:packager-guide[Packager Guide], which presents the best
practices for installing and integrating NUT, is also a good reading.
[NOTE]
.Keep in mind that...
================================================================================
- the paths shown below are the default values you get by just calling
configure by itself. If you have used --prefix or similar, things will be
different. Also, if you didn't install this program from source yourself, the
paths will probably have a number of differences.
- by default, your system probably won't find the man pages, since they
install to /usr/local/ups/man. You can fix this by editing your MANPATH, or
just do this:
man -M /usr/local/ups/man <man page>
- if your favorite system offers up to date binary packages, you should always
prefer these over a source installation. Along with the known advantages of such
systems for installation, upgrade and removal, there are many integration issues
that have been addressed.
================================================================================
Prepare your system
~~~~~~~~~~~~~~~~~~~~
System User creation
^^^^^^^^^^^^^^^^^^^^
Create at least one system user and a group for running this software. You
might call them "ups" and "nut". The exact names aren't important as
long as you are consistent.
The process for doing this varies from one system to the next, and
explaining how to add users is beyond the scope of this document.
For the purposes of this document, the user name and group name
will be 'ups' and 'nut' respectively.
Be sure the new user is a member of the new group! If you forget to
do this, you will have problems later on when you try to start upsd.
Build and install
~~~~~~~~~~~~~~~~~
[[Configuration]]
Configuration
^^^^^^^^^^^^^
Configure the source tree for your system. Add the '--with-user' and
'--with-group' switch to set the user name and group that you created
above.
./configure --with-user=ups --with-group=nut
If you need any other switches for configure, add them here. For example:
* to build and install USB drivers, add '--with-usb' (note that you
need to install libusb development package or files).
* to build and install SNMP drivers, add '--with-snmp' (note that
you need to install libsnmp development package or files).
* to build and install CGI scripts, add '--with-cgi'.
See <<Configure_options,Configure options>> from the User Manual,
docs/configure.txt or './configure --help' for all the available
options.
If you alter paths with additional switches, be sure to use those
new paths while reading the rest of the steps.
Reference: <<Configure_options,Configure options>> from the
User Manual.
Build the programs
^^^^^^^^^^^^^^^^^^
make
This will build the NUT client and server programs and the
selected drivers. It will also build any other features that were
selected during <<Configuration,configuration>> step above.
Installation
^^^^^^^^^^^^
[NOTE]
=====================================================================
you should now gain privileges for installing software if necessary:
su
=====================================================================
Install the files to a system level directory:
make install
This will install the compiled programs and man pages, as well as
some data files required by NUT. Any optional features selected
during configuration will also be installed.
This will also install sample versions of the NUT configuration
files. Sample files are installed with names like ups.conf.sample
so they will not overwrite any existing real config files you may
have created.
If you are packaging this software, then you will probably want to
use the DESTDIR variable to redirect the build into another place,
i.e.:
make DESTDIR=/tmp/package install
make DESTDIR=/tmp/package install-conf
[[StatePath]]
State path creation
^^^^^^^^^^^^^^^^^^^
Create the state path directory for the driver(s) and server to use
for storing UPS status data and other auxiliary files, and make it
owned by the user you created.
mkdir -p /var/state/ups
chmod 0770 /var/state/ups
chown root:nut /var/state/ups
[[Ownership]]
Ownership and permissions
^^^^^^^^^^^^^^^^^^^^^^^^^
Set ownership data and permissions on your serial or USB ports
that go to your UPS hardware. Be sure to limit access to just
the user you created earlier.
These examples assume the second serial port (ttyS1) on a typical
Slackware system. On FreeBSD, that would be cuaa1. Serial ports
vary greatly, so yours may be called something else.
chmod 0660 /dev/ttyS1
chown root:nut /dev/ttyS1
////////////////////////////////////////////////////////////////////////////////
FIXME: TBR
////////////////////////////////////////////////////////////////////////////////
The setup for USB ports is slightly more complicated. Device files
for USB devices, such as /proc/bus/usb/002/001, are usually
created "on the fly" when a device is plugged in, and disappear
when the device is disconnected. Moreover, the names of these
device files can change randomly. To set up the correct
permissions for the USB device, you may need to set up (operating
system dependent) hotplugging scripts. Sample scripts and
information are provided in the scripts/hotplug and
scripts/udev directories. For most users, the hotplugging scripts
will be installed automatically by "make install".
(If you want to try if a driver works without setting up
hotplugging, you can add the "-u root" option to upsd, upsmon, and
drivers; this should allow you to follow the below
instructions. However, don't forget to set up the correct
permissions later!).
NOTE: if you are using something like devfs or udev, make sure
these permissions stay set across a reboot. If they revert to the
old values, your drivers may fail to start.
You are now ready to configure NUT, and start testing and using it.
You can jump directly to the <<Configuration_notes,NUT configuration>>.
[[Installing_packages]]
Installing from packages
------------------------
This chapter describes the specific installation steps when using
binary packages that exist on various major systems.
[[Debian]]
Debian, Ubuntu and other derivatives
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE: NUT is packaged and well maintained in these systems.
The official Debian packager is part of the NUT Team.
Using your prefered method (apt-get, aptitude, Synaptic, ...), install
the 'nut' package, and optionaly the following:
- 'nut-cgi', if you need the CGI (HTML) option,
- 'nut-snmp', if you need the snmp-ups driver,
- 'nut-xml', for the netxml-ups driver,
- 'nut-powerman-pdu', to control the PowerMan daemon (PDU management)
- 'nut-dev', if you need the development files.
////////////////////////////////////////////////////////////////////////////////
- nut-client
////////////////////////////////////////////////////////////////////////////////
Configuration files are located in /etc/nut.
linkman:nut.conf[5] must be edited to be able to invoke /etc/init.d/nut
NOTE: Ubuntu users can access the APT URL installation by clicking on link:apt://nut[this link].
[[Mandriva]]
Mandriva
~~~~~~~~
NOTE: NUT is packaged and well maintained in these systems.
The official Mandriva packager is part of the NUT Team.
Using your prefered method (urpmi, RPMdrake, ...), install one of the two below
packages:
- 'nut-server' if you have a 'standalone' or 'netserver' installation,
- 'nut' if you have a 'netclient' installation.
Optionaly, you can also install the following:
- 'nut-cgi', if you need the CGI (HTML) option,
- 'nut-devel', if you need the development files.
[[Suse]]
Suse / Opensuse
~~~~~~~~~~~~~~~
NOTE: NUT is packaged and well maintained in these systems.
The official Suse packager is part of the NUT Team.
Install the 'nut-classic' package, and optionaly the following:
- 'nut-drivers-net', if you need the snmp-ups or the netxml-ups drivers,
- 'nut-cgi', if you need the CGI (HTML) option,
- 'nut-devel', if you need the development files,
NOTE: Suse and Opensuse users can use the
link:http://software.opensuse.org/search?baseproject=ALL&p=1&q=nut[one-click install method]
to install NUT.
[[RedHat]]
Red Hat, Fedora and CentOS
~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE: NUT is packaged and well maintained in these systems.
The official Red Hat packager is part of the NUT Team.
Using your prefered method (yum, Add/Remove Software, ...), install one of the
two below packages:
- 'nut' if you have a 'standalone' or 'netserver' installation,
- 'nut-client' if you have a 'netclient' installation.
Optionaly, you can also install the following:
- 'nut-cgi', if you need the CGI (HTML) option,
- 'nut-xml', if you need the netxml-ups driver,
- 'nut-devel', if you need the development files.
[[FreeBSD]]
FreeBSD
~~~~~~~
You can either install NUT as a binary package or as a port.
Binary package
^^^^^^^^^^^^^^
To install the main component, use the following command:
# pkg_add -r nut
Port
^^^^
The port is located under /usr/ports/sysutils/nut.
To install it, use the following command:
# cd /usr/ports/sysutils/nut/ && make install clean
You have to define WITH_NUT_CGI to build the optional CGI scripts.
Optionaly, you can also install the following ports:
- sysutils/nut-snmp, for the SNMP driver,
- sysutils/nut-usb, for the USB drivers,
- sysutils/nut-libupsclient, for the upsclient library.
You are now ready to configure NUT, and start testing and using it.
You can jump directly to the
<<Configuration_notes,NUT configuration>>.

View File

@ -9,7 +9,7 @@ SUBDIRS = include common clients conf data tools docs drivers \
lib scripts server tests
# COPYING is included automatically.
EXTRA_DIST = LICENSE-GPL2 LICENSE-GPL3 MAINTAINERS UPGRADING
EXTRA_DIST = INSTALL.nut LICENSE-GPL2 LICENSE-GPL3 MAINTAINERS UPGRADING
# ----------------------------------------------------------------------
# flags to pass to ./configure when calling "make distcheck" and "make
@ -22,7 +22,8 @@ DISTCHECK_LIGHT_FLAGS = --with-all=auto --with-ssl=auto --with-doc=auto
DISTCHECK_CONFIGURE_FLAGS = ${DISTCHECK_FLAGS} \
--with-hotplug-dir='$${prefix}/etc/hotplug' \
--with-udev-dir='$${prefix}/etc/udev'
--with-udev-dir='$${prefix}/etc/udev' \
--with-devd-dir='$${prefix}/etc/devd'
distcheck-light:
$(MAKE) $(AM_MAKEFLAGS) DISTCHECK_FLAGS="$(DISTCHECK_LIGHT_FLAGS)" distcheck
@ -44,16 +45,13 @@ ChangeLog: tools/gitlog2changelog.py dummy-stamp
$(top_srcdir)/tools/gitlog2changelog.py v2.6.0 || \
echo "gitlog2changelog.py failed to generate the ChangeLog. See https://github.com/networkupstools/nut/commits/master" > $@
if HAVE_ASCIIDOC
website:
cd docs; $(MAKE) $(AM_MAKEFLAGS) website
cd docs/man; $(MAKE) $(AM_MAKEFLAGS) html-man
cd tools; $(MAKE) $(AM_MAKEFLAGS) website
cd docs/website; $(MAKE) $(AM_MAKEFLAGS) website
else !HAVE_ASCIIDOC
website:
@echo "Not building website since 'asciidoc' was not found."
endif !HAVE_ASCIIDOC
# Maintainers targets: distribution signature and hashes
dist-sig:
gpg --detach-sign nut-@PACKAGE_VERSION@.tar.gz
dist-hash:
md5sum nut-@PACKAGE_VERSION@.tar.gz > nut-@PACKAGE_VERSION@.tar.gz.md5
sha256sum nut-@PACKAGE_VERSION@.tar.gz > nut-@PACKAGE_VERSION@.tar.gz.sha256
# ----------------------------------------------------------------------
# targets from old build system (pre-automake).

View File

@ -72,7 +72,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libavahi.m4 \
$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
$(top_srcdir)/m4/nut_check_libgd.m4 \
$(top_srcdir)/m4/nut_check_libhal.m4 \
$(top_srcdir)/m4/nut_check_libltdl.m4 \
$(top_srcdir)/m4/nut_check_libneon.m4 \
$(top_srcdir)/m4/nut_check_libnetsnmp.m4 \
@ -82,10 +81,9 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libusb.m4 \
$(top_srcdir)/m4/nut_check_libwrap.m4 \
$(top_srcdir)/m4/nut_check_os.m4 \
$(top_srcdir)/m4/nut_config_libhal.m4 \
$(top_srcdir)/m4/nut_report_feature.m4 \
$(top_srcdir)/m4/nut_type_socklen_t.m4 \
$(top_srcdir)/configure.in
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
@ -199,10 +197,6 @@ EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAL_CALLOUTS_PATH = @HAL_CALLOUTS_PATH@
HAL_DEVICE_MATCH_KEY = @HAL_DEVICE_MATCH_KEY@
HAL_FDI_PATH = @HAL_FDI_PATH@
HAL_USER = @HAL_USER@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@ -214,8 +208,6 @@ LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
LIBGD_CFLAGS = @LIBGD_CFLAGS@
LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
LIBHAL_LIBS = @LIBHAL_LIBS@
LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
LIBIPMI_LIBS = @LIBIPMI_LIBS@
LIBLTDL_CFLAGS = @LIBLTDL_CFLAGS@
@ -301,6 +293,7 @@ builddir = @builddir@
cgiexecdir = @cgiexecdir@
datadir = @datadir@
datarootdir = @datarootdir@
devddir = @devddir@
docdir = @docdir@
driverexecdir = @driverexecdir@
dvidir = @dvidir@
@ -353,7 +346,7 @@ SUBDIRS = include common clients conf data tools docs drivers \
# COPYING is included automatically.
EXTRA_DIST = LICENSE-GPL2 LICENSE-GPL3 MAINTAINERS UPGRADING
EXTRA_DIST = INSTALL.nut LICENSE-GPL2 LICENSE-GPL3 MAINTAINERS UPGRADING
# ----------------------------------------------------------------------
# flags to pass to ./configure when calling "make distcheck" and "make
@ -364,7 +357,8 @@ DISTCHECK_FLAGS = --with-all --with-ssl --with-doc=auto
DISTCHECK_LIGHT_FLAGS = --with-all=auto --with-ssl=auto --with-doc=auto
DISTCHECK_CONFIGURE_FLAGS = ${DISTCHECK_FLAGS} \
--with-hotplug-dir='$${prefix}/etc/hotplug' \
--with-udev-dir='$${prefix}/etc/udev'
--with-udev-dir='$${prefix}/etc/udev' \
--with-devd-dir='$${prefix}/etc/devd'
# Automatically generate the ChangeLog from Git logs:
@ -882,13 +876,13 @@ ChangeLog: tools/gitlog2changelog.py dummy-stamp
$(top_srcdir)/tools/gitlog2changelog.py v2.6.0 || \
echo "gitlog2changelog.py failed to generate the ChangeLog. See https://github.com/networkupstools/nut/commits/master" > $@
@HAVE_ASCIIDOC_TRUE@website:
@HAVE_ASCIIDOC_TRUE@ cd docs; $(MAKE) $(AM_MAKEFLAGS) website
@HAVE_ASCIIDOC_TRUE@ cd docs/man; $(MAKE) $(AM_MAKEFLAGS) html-man
@HAVE_ASCIIDOC_TRUE@ cd tools; $(MAKE) $(AM_MAKEFLAGS) website
@HAVE_ASCIIDOC_TRUE@ cd docs/website; $(MAKE) $(AM_MAKEFLAGS) website
@HAVE_ASCIIDOC_FALSE@website:
@HAVE_ASCIIDOC_FALSE@ @echo "Not building website since 'asciidoc' was not found."
# Maintainers targets: distribution signature and hashes
dist-sig:
gpg --detach-sign nut-@PACKAGE_VERSION@.tar.gz
dist-hash:
md5sum nut-@PACKAGE_VERSION@.tar.gz > nut-@PACKAGE_VERSION@.tar.gz.md5
sha256sum nut-@PACKAGE_VERSION@.tar.gz > nut-@PACKAGE_VERSION@.tar.gz.sha256
build:
@echo $(WARN)

45
NEWS
View File

@ -3,6 +3,51 @@ If you're upgrading from an earlier version, see the UPGRADING file.
For a complete and more detailed list of changes, please refer to the
ChangeLog file.
---------------------------------------------------------------------------
Release notes for NUT 2.7.2 - what's new since 2.7.1:
- This release is the second interim release of the 2.7 testing series.
- libupsclient had undefined references related to functions of libcommon.
This issue was reported on Debian (bug #731156) and is now fixed
- support for new devices:
CABAC UPS-1700DV2
Eaton Powerware 3105
Emerson Network Power Liebert PSI 1440
MicroDowell B.Box LP 500
Numeric Digital 800 plus
OptiUPS VS 575C
Tripp Lite SU10KRT3/1X
- FreeDesktop Hardware Abstraction Layer (HAL) support was removed.
- nutdrv_atcl_usb: new driver for 'ATCL FOR UPS'
- al175: re-introduced this driver (actually, it was in 2.7.1)
- upsdrvctl now provides retry options for upsdrvctl and driver(s)
- snmp-ups: add support for XPPC-MIB and Tripp Lite SU10KRT3/1X.
Also fix erroneous status in HP/Compaq SNMP MIB (with the most recent HP
firmware (1.76) ; improved various MIBs (APC, HP/Compaq, ...)
- nutdrv_qx: add new 'fallback' Q1 subdriver, with minimal 'Q1' support.
General improvements on all subdrivers.
- mge-shut: partially revert PnP/RTS change, for initializing the
communication with the UPS. Note that nut-scanner similar function was
not modified however.
- FreeBSD DEVD support: generate devd.conf files for USB UPSes
This adds a --with-devd-dir=PATH option to ./configure
- The NUT website was moved to a standalone website. A separate code
repository and source archive are now available.
- As usual, more bugfixes, cleanup and improvements, on both source code
and documentation.
---------------------------------------------------------------------------
Release notes for NUT 2.7.1 - what's new since 2.6.5:

12
README
View File

@ -123,13 +123,13 @@ The entry in `ups.conf` looks like this:
To start and stop drivers, use upsdrvctl. By default, it will start or
stop every UPS in the config file:
/usr/local/ups/bin/upsdrvctl start
/usr/local/ups/bin/upsdrvctl stop
/usr/local/ups/sbin/upsdrvctl start
/usr/local/ups/sbin/upsdrvctl stop
However, you can also just start or stop one by adding its name:
/usr/local/ups/bin/upsdrvctl start sparky
/usr/local/ups/bin/upsdrvctl stop sparky
/usr/local/ups/sbin/upsdrvctl start sparky
/usr/local/ups/sbin/upsdrvctl stop sparky
To find the driver name for your device, refer to the section below
called "HARDWARE SUPPORT TABLE".
@ -223,8 +223,8 @@ upsdrvctl can also shut down (power down) all of your UPS hardware.
WARNING: if you play around with this command, expect your filesystems
to die. Don't power off your computers unless they're ready for it:
/usr/local/ups/bin/upsdrvctl shutdown
/usr/local/ups/bin/upsdrvctl shutdown sparky
/usr/local/ups/sbin/upsdrvctl shutdown
/usr/local/ups/sbin/upsdrvctl shutdown sparky
You should read the <<UPS_shutdown,Configuring automatic UPS shutdowns>>
chapter to learn more about when to use this feature. If called at the wrong

View File

@ -7,6 +7,21 @@ This file lists changes that affect users who installed older versions
of this software. When upgrading from an older version, be sure to
check this file to see if you need to make changes to your system.
Changes from 2.7.1 to 2.7.2
---------------------------
- upsdrvctl is now installed to $prefix/sbin rather than $driverexec.
This usually means moving from /bin to /sbin, apart from few exceptions.
In all cases, please adapt your scripts.
- FreeDesktop Hardware Abstraction Layer (HAL) support was removed.
Please adapt your packaging files, if you used to distribute the
nut-hal-drivers package.
- This is a good time to point out that for stricter packaging systems, it may
be beneficial to add "--enable-option-checking=fatal" to the ./configure
command line, in order to quickly pick up any other removed option flags.
Changes from 2.6.5 to 2.7.1
---------------------------

2
aclocal.m4 vendored
View File

@ -1322,7 +1322,6 @@ m4_include([m4/nut_check_asciidoc.m4])
m4_include([m4/nut_check_libavahi.m4])
m4_include([m4/nut_check_libfreeipmi.m4])
m4_include([m4/nut_check_libgd.m4])
m4_include([m4/nut_check_libhal.m4])
m4_include([m4/nut_check_libltdl.m4])
m4_include([m4/nut_check_libneon.m4])
m4_include([m4/nut_check_libnetsnmp.m4])
@ -1332,6 +1331,5 @@ m4_include([m4/nut_check_libpowerman.m4])
m4_include([m4/nut_check_libusb.m4])
m4_include([m4/nut_check_libwrap.m4])
m4_include([m4/nut_check_os.m4])
m4_include([m4/nut_config_libhal.m4])
m4_include([m4/nut_report_feature.m4])
m4_include([m4/nut_type_socklen_t.m4])

View File

@ -46,14 +46,15 @@ upsstats_cgi_SOURCES = upsstats.c upsclient.h status.h upsstats.h \
# not LDADD.
libupsclient_la_SOURCES = upsclient.c upsclient.h
libupsclient_la_LIBADD = ../common/libparseconf.la
libupsclient_la_LIBADD = ../common/libcommonclient.la
if WITH_SSL
libupsclient_la_LIBADD += $(LIBSSL_LIBS)
endif
# libupsclient version information
# http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
libupsclient_la_LDFLAGS = -version-info 3:1:0
libupsclient_la_LDFLAGS = -version-info 4:0:0
libnutclient_la_SOURCES = nutclient.h nutclient.cpp
libnutclient_la_LDFLAGS = -version-info 0:0:0

View File

@ -79,7 +79,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libavahi.m4 \
$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
$(top_srcdir)/m4/nut_check_libgd.m4 \
$(top_srcdir)/m4/nut_check_libhal.m4 \
$(top_srcdir)/m4/nut_check_libltdl.m4 \
$(top_srcdir)/m4/nut_check_libneon.m4 \
$(top_srcdir)/m4/nut_check_libnetsnmp.m4 \
@ -89,10 +88,9 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libusb.m4 \
$(top_srcdir)/m4/nut_check_libwrap.m4 \
$(top_srcdir)/m4/nut_check_os.m4 \
$(top_srcdir)/m4/nut_config_libhal.m4 \
$(top_srcdir)/m4/nut_report_feature.m4 \
$(top_srcdir)/m4/nut_type_socklen_t.m4 \
$(top_srcdir)/configure.in
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
@ -133,9 +131,12 @@ LTLIBRARIES = $(lib_LTLIBRARIES)
libnutclient_la_LIBADD =
am_libnutclient_la_OBJECTS = nutclient.lo
libnutclient_la_OBJECTS = $(am_libnutclient_la_OBJECTS)
libnutclient_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
$(CXXFLAGS) $(libnutclient_la_LDFLAGS) $(LDFLAGS) -o $@
am__DEPENDENCIES_1 =
@WITH_SSL_TRUE@am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1)
libupsclient_la_DEPENDENCIES = ../common/libparseconf.la \
libupsclient_la_DEPENDENCIES = ../common/libcommonclient.la \
$(am__DEPENDENCIES_2)
am_libupsclient_la_OBJECTS = upsclient.lo
libupsclient_la_OBJECTS = $(am_libupsclient_la_OBJECTS)
@ -274,10 +275,6 @@ EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAL_CALLOUTS_PATH = @HAL_CALLOUTS_PATH@
HAL_DEVICE_MATCH_KEY = @HAL_DEVICE_MATCH_KEY@
HAL_FDI_PATH = @HAL_FDI_PATH@
HAL_USER = @HAL_USER@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@ -289,8 +286,6 @@ LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
LIBGD_CFLAGS = @LIBGD_CFLAGS@
LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
LIBHAL_LIBS = @LIBHAL_LIBS@
LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
LIBIPMI_LIBS = @LIBIPMI_LIBS@
LIBLTDL_CFLAGS = @LIBLTDL_CFLAGS@
@ -376,6 +371,7 @@ builddir = @builddir@
cgiexecdir = @cgiexecdir@
datadir = @datadir@
datarootdir = @datarootdir@
devddir = @devddir@
docdir = @docdir@
driverexecdir = @driverexecdir@
dvidir = @dvidir@
@ -445,12 +441,13 @@ upsstats_cgi_SOURCES = upsstats.c upsclient.h status.h upsstats.h \
# not LDADD.
libupsclient_la_SOURCES = upsclient.c upsclient.h
libupsclient_la_LIBADD = ../common/libparseconf.la $(am__append_4)
libupsclient_la_LIBADD = ../common/libcommonclient.la $(am__append_4)
# libupsclient version information
# http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
libupsclient_la_LDFLAGS = -version-info 3:1:0
libupsclient_la_LDFLAGS = -version-info 4:0:0
libnutclient_la_SOURCES = nutclient.h nutclient.cpp
libnutclient_la_LDFLAGS = -version-info 0:0:0
all: all-am
.SUFFIXES:
@ -518,7 +515,7 @@ clean-libLTLIBRARIES:
rm -f "$${dir}/so_locations"; \
done
libnutclient.la: $(libnutclient_la_OBJECTS) $(libnutclient_la_DEPENDENCIES) $(EXTRA_libnutclient_la_DEPENDENCIES)
$(CXXLINK) -rpath $(libdir) $(libnutclient_la_OBJECTS) $(libnutclient_la_LIBADD) $(LIBS)
$(libnutclient_la_LINK) -rpath $(libdir) $(libnutclient_la_OBJECTS) $(libnutclient_la_LIBADD) $(LIBS)
libupsclient.la: $(libupsclient_la_OBJECTS) $(libupsclient_la_DEPENDENCIES) $(EXTRA_libupsclient_la_DEPENDENCIES)
$(libupsclient_la_LINK) -rpath $(libdir) $(libupsclient_la_OBJECTS) $(libupsclient_la_LIBADD) $(LIBS)
install-binPROGRAMS: $(bin_PROGRAMS)

View File

@ -2,7 +2,7 @@
AM_CFLAGS = -I$(top_srcdir)/include
noinst_LTLIBRARIES = libparseconf.la libcommon.la
noinst_LTLIBRARIES = libparseconf.la libcommon.la libcommonclient.la
libparseconf_la_SOURCES = parseconf.c
# do not hard depend on '../include/nut_version.h', since it blocks
@ -10,6 +10,8 @@ libparseconf_la_SOURCES = parseconf.c
# BUILT_SOURCES (in ../include) will ensure nut_version.h will
# be built before anything else
libcommon_la_SOURCES = common.c state.c upsconf.c
libcommonclient_la_SOURCES = common.c state.c
# ensure inclusion of local implementation of missing systems functions
# using LTLIBOBJS. Refer to configure.in -> AC_REPLACE_FUNCS
libcommon_la_LIBADD = libparseconf.la @LTLIBOBJS@
libcommonclient_la_LIBADD = libparseconf.la @LTLIBOBJS@

View File

@ -67,7 +67,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libavahi.m4 \
$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
$(top_srcdir)/m4/nut_check_libgd.m4 \
$(top_srcdir)/m4/nut_check_libhal.m4 \
$(top_srcdir)/m4/nut_check_libltdl.m4 \
$(top_srcdir)/m4/nut_check_libneon.m4 \
$(top_srcdir)/m4/nut_check_libnetsnmp.m4 \
@ -77,10 +76,9 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libusb.m4 \
$(top_srcdir)/m4/nut_check_libwrap.m4 \
$(top_srcdir)/m4/nut_check_os.m4 \
$(top_srcdir)/m4/nut_config_libhal.m4 \
$(top_srcdir)/m4/nut_report_feature.m4 \
$(top_srcdir)/m4/nut_type_socklen_t.m4 \
$(top_srcdir)/configure.in
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
@ -91,6 +89,9 @@ LTLIBRARIES = $(noinst_LTLIBRARIES)
libcommon_la_DEPENDENCIES = libparseconf.la @LTLIBOBJS@
am_libcommon_la_OBJECTS = common.lo state.lo upsconf.lo
libcommon_la_OBJECTS = $(am_libcommon_la_OBJECTS)
libcommonclient_la_DEPENDENCIES = libparseconf.la @LTLIBOBJS@
am_libcommonclient_la_OBJECTS = common.lo state.lo
libcommonclient_la_OBJECTS = $(am_libcommonclient_la_OBJECTS)
libparseconf_la_LIBADD =
am_libparseconf_la_OBJECTS = parseconf.lo
libparseconf_la_OBJECTS = $(am_libparseconf_la_OBJECTS)
@ -107,8 +108,10 @@ CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
SOURCES = $(libcommon_la_SOURCES) $(libparseconf_la_SOURCES)
DIST_SOURCES = $(libcommon_la_SOURCES) $(libparseconf_la_SOURCES)
SOURCES = $(libcommon_la_SOURCES) $(libcommonclient_la_SOURCES) \
$(libparseconf_la_SOURCES)
DIST_SOURCES = $(libcommon_la_SOURCES) $(libcommonclient_la_SOURCES) \
$(libparseconf_la_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
@ -159,10 +162,6 @@ EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAL_CALLOUTS_PATH = @HAL_CALLOUTS_PATH@
HAL_DEVICE_MATCH_KEY = @HAL_DEVICE_MATCH_KEY@
HAL_FDI_PATH = @HAL_FDI_PATH@
HAL_USER = @HAL_USER@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@ -174,8 +173,6 @@ LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
LIBGD_CFLAGS = @LIBGD_CFLAGS@
LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
LIBHAL_LIBS = @LIBHAL_LIBS@
LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
LIBIPMI_LIBS = @LIBIPMI_LIBS@
LIBLTDL_CFLAGS = @LIBLTDL_CFLAGS@
@ -261,6 +258,7 @@ builddir = @builddir@
cgiexecdir = @cgiexecdir@
datadir = @datadir@
datarootdir = @datarootdir@
devddir = @devddir@
docdir = @docdir@
driverexecdir = @driverexecdir@
dvidir = @dvidir@
@ -303,7 +301,7 @@ top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
udevdir = @udevdir@
AM_CFLAGS = -I$(top_srcdir)/include
noinst_LTLIBRARIES = libparseconf.la libcommon.la
noinst_LTLIBRARIES = libparseconf.la libcommon.la libcommonclient.la
libparseconf_la_SOURCES = parseconf.c
# do not hard depend on '../include/nut_version.h', since it blocks
@ -311,9 +309,11 @@ libparseconf_la_SOURCES = parseconf.c
# BUILT_SOURCES (in ../include) will ensure nut_version.h will
# be built before anything else
libcommon_la_SOURCES = common.c state.c upsconf.c
libcommonclient_la_SOURCES = common.c state.c
# ensure inclusion of local implementation of missing systems functions
# using LTLIBOBJS. Refer to configure.in -> AC_REPLACE_FUNCS
libcommon_la_LIBADD = libparseconf.la @LTLIBOBJS@
libcommonclient_la_LIBADD = libparseconf.la @LTLIBOBJS@
all: all-am
.SUFFIXES:
@ -359,6 +359,8 @@ clean-noinstLTLIBRARIES:
done
libcommon.la: $(libcommon_la_OBJECTS) $(libcommon_la_DEPENDENCIES) $(EXTRA_libcommon_la_DEPENDENCIES)
$(LINK) $(libcommon_la_OBJECTS) $(libcommon_la_LIBADD) $(LIBS)
libcommonclient.la: $(libcommonclient_la_OBJECTS) $(libcommonclient_la_DEPENDENCIES) $(EXTRA_libcommonclient_la_DEPENDENCIES)
$(LINK) $(libcommonclient_la_OBJECTS) $(libcommonclient_la_LIBADD) $(LIBS)
libparseconf.la: $(libparseconf_la_OBJECTS) $(libparseconf_la_DEPENDENCIES) $(EXTRA_libparseconf_la_DEPENDENCIES)
$(LINK) $(libparseconf_la_OBJECTS) $(libparseconf_la_LIBADD) $(LIBS)

View File

@ -68,7 +68,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libavahi.m4 \
$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
$(top_srcdir)/m4/nut_check_libgd.m4 \
$(top_srcdir)/m4/nut_check_libhal.m4 \
$(top_srcdir)/m4/nut_check_libltdl.m4 \
$(top_srcdir)/m4/nut_check_libneon.m4 \
$(top_srcdir)/m4/nut_check_libnetsnmp.m4 \
@ -78,10 +77,9 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libusb.m4 \
$(top_srcdir)/m4/nut_check_libwrap.m4 \
$(top_srcdir)/m4/nut_check_os.m4 \
$(top_srcdir)/m4/nut_config_libhal.m4 \
$(top_srcdir)/m4/nut_report_feature.m4 \
$(top_srcdir)/m4/nut_type_socklen_t.m4 \
$(top_srcdir)/configure.in
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
@ -171,10 +169,6 @@ EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAL_CALLOUTS_PATH = @HAL_CALLOUTS_PATH@
HAL_DEVICE_MATCH_KEY = @HAL_DEVICE_MATCH_KEY@
HAL_FDI_PATH = @HAL_FDI_PATH@
HAL_USER = @HAL_USER@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@ -186,8 +180,6 @@ LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
LIBGD_CFLAGS = @LIBGD_CFLAGS@
LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
LIBHAL_LIBS = @LIBHAL_LIBS@
LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
LIBIPMI_LIBS = @LIBIPMI_LIBS@
LIBLTDL_CFLAGS = @LIBLTDL_CFLAGS@
@ -273,6 +265,7 @@ builddir = @builddir@
cgiexecdir = @cgiexecdir@
datadir = @datadir@
datarootdir = @datarootdir@
devddir = @devddir@
docdir = @docdir@
driverexecdir = @driverexecdir@
dvidir = @dvidir@

View File

@ -27,7 +27,7 @@
#
# This user should not have write access to upsmon.conf.
#
# RUN_AS_USER nobody
# RUN_AS_USER nut
# --------------------------------------------------------------------------
# MONITOR <system> <powervalue> <username> <password> ("master"|"slave")
@ -196,7 +196,7 @@ DEADTIME 15
#
# See the shutdown.txt file in the docs subdirectory for more information.
POWERDOWNFLAG /usr/local/ups/etc/killpower
POWERDOWNFLAG /etc/nut/killpower
# --------------------------------------------------------------------------
# NOTIFYMSG - change messages sent by upsmon when certain events occur
@ -307,7 +307,7 @@ FINALDELAY 5
# Certificates are stored in a dedicated database (splitted in 3 files).
# Specify the path of the database directory.
#
# CERTPATH /usr/local/ups/etc/cert/upsmon
# CERTPATH /etc/nut/cert/upsmon
#
# With OpenSSL:
# Directory containing CA certificates in PEM format, used to verify

463
configure vendored
View File

@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.69 for nut 2.7.1.
# Generated by GNU Autoconf 2.69 for nut 2.7.2.
#
#
# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@ -587,8 +587,8 @@ MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='nut'
PACKAGE_TARNAME='nut'
PACKAGE_VERSION='2.7.1'
PACKAGE_STRING='nut 2.7.1'
PACKAGE_VERSION='2.7.2'
PACKAGE_STRING='nut 2.7.2'
PACKAGE_BUGREPORT=''
PACKAGE_URL=''
@ -640,6 +640,7 @@ systemdsystemshutdowndir
systemdsystemunitdir
pkgconfigdir
driverexecdir
devddir
cgiexecdir
WORDS_BIGENDIAN
SUN_LIBUSB
@ -657,12 +658,6 @@ NETLIBS
DRIVER_INSTALL_TARGET
DRIVER_MAN_LIST
DRIVER_BUILD_LIST
LIBHAL_LIBS
LIBHAL_CFLAGS
HAL_CALLOUTS_PATH
HAL_FDI_PATH
HAL_DEVICE_MATCH_KEY
HAL_USER
LIBLTDL_LIBS
LIBLTDL_CFLAGS
LIBWRAP_LIBS
@ -692,6 +687,8 @@ HAVE_ASPELL_TRUE
ASPELL
MANUALUPDATE_FALSE
MANUALUPDATE_TRUE
WITH_DEVD_FALSE
WITH_DEVD_TRUE
WITH_UDEV_FALSE
WITH_UDEV_TRUE
WITH_HOTPLUG_FALSE
@ -729,8 +726,6 @@ WITH_ASCIIDOC_TRUE
DBLATEX
A2X
ASCIIDOC
WITH_HAL_FALSE
WITH_HAL_TRUE
WITH_CGI_FALSE
WITH_CGI_TRUE
WITH_LIBLTDL_FALSE
@ -888,13 +883,6 @@ with_snmp_includes
with_snmp_libs
with_usb_includes
with_usb_libs
with_hal
with_hal_includes
with_hal_libs
with_hal_user
with_hal_device_match_key
with_hal_callouts_path
with_hal_fdi_path
with_snmp
with_neon
with_neon_includes
@ -946,6 +934,7 @@ with_pkgconfig_dir
with_systemdsystemunitdir
with_hotplug_dir
with_udev_dir
with_devd_dir
'
ac_precious_vars='build_alias
host_alias
@ -1505,7 +1494,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
\`configure' configures nut 2.7.1 to adapt to many kinds of systems.
\`configure' configures nut 2.7.2 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@ -1576,7 +1565,7 @@ fi
if test -n "$ac_init_help"; then
case $ac_init_help in
short | recursive ) echo "Configuration of nut 2.7.1:";;
short | recursive ) echo "Configuration of nut 2.7.2:";;
esac
cat <<\_ACEOF
@ -1611,17 +1600,6 @@ Optional Packages:
[--with-usb-includes=CFLAGS]
include flags for the libusb library
[--with-usb-libs=LIBS] linker flags for the libusb library
--with-hal build and install HAL support (no)
[--with-hal-includes=CFLAGS]
include flags for the HAL library
[--with-hal-libs=LIBS] linker flags for the HAL library
[--with-hal-user=USER] addons run as user
[--with-hal-device-match-key=KEY]
device match key
[--with-hal-callouts-path=PATH]
installation path for callouts
[--with-hal-fdi-path=PATH]
installation path for device information files
--with-snmp build and install SNMP drivers (auto)
--with-neon build and install neon based XML/HTTP driver (auto)
[--with-neon-includes=CFLAGS]
@ -1692,6 +1670,8 @@ Optional Packages:
Directory for systemd service files (auto)
--with-hotplug-dir=PATH where to install hotplug rules (/etc/hotplug)
--with-udev-dir=PATH where to install udev rules (/lib/udev or /etc/udev)
--with-devd-dir=PATH where to install devd.conf file (/usr/local/etc/devd
or /etc/devd)
Some influential environment variables:
CC C compiler command
@ -1781,7 +1761,7 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
nut configure 2.7.1
nut configure 2.7.2
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@ -2367,7 +2347,7 @@ cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by nut $as_me 2.7.1, which was
It was created by nut $as_me 2.7.2, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@ -3438,7 +3418,7 @@ fi
# Define the identity of the package.
PACKAGE='nut'
VERSION='2.7.1'
VERSION='2.7.2'
cat >>confdefs.h <<_ACEOF
@ -4992,6 +4972,14 @@ if test ! -d "${udevdir}"; then
fi
fi
devddir='/usr/local/etc/devd'
if test ! -d "${devddir}"; then
devddir='/etc/devd'
if test ! -d "${devddir}"; then
devddir=''
fi
fi
RUN_AS_USER="nobody"
RUN_AS_GROUP="nobody"
PIDPATH="/var/run"
@ -8076,277 +8064,6 @@ done
fi
# Check whether --with-hal was given.
if test "${with_hal+set}" = set; then :
withval=$with_hal; nut_with_hal="${withval}"
else
nut_with_hal="no"
fi
if test -z "${nut_have_libhal_seen}"; then
nut_have_libhal_seen=yes
CFLAGS_ORIG="${CFLAGS}"
LIBS_ORIG="${LIBS}"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libhal version via pkg-config (0.5.8 minimum required)" >&5
$as_echo_n "checking for libhal version via pkg-config (0.5.8 minimum required)... " >&6; }
HAL_VERSION="`pkg-config --silence-errors --modversion hal 2>/dev/null`"
if test "$?" != "0" -o -z "${HAL_VERSION}"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: none found" >&5
$as_echo "none found" >&6; }
elif pkg-config --silence-errors --atleast-version=0.5.8 hal 2>/dev/null; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${HAL_VERSION} found" >&5
$as_echo "${HAL_VERSION} found" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ${HAL_VERSION} is too old" >&5
$as_echo "$as_me: WARNING: ${HAL_VERSION} is too old" >&2;}
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libhal cflags" >&5
$as_echo_n "checking for libhal cflags... " >&6; }
# Check whether --with-hal-includes was given.
if test "${with_hal_includes+set}" = set; then :
withval=$with_hal_includes;
case "${withval}" in
yes|no)
as_fn_error $? "invalid option --with(out)-hal-includes - see docs/configure.txt" "$LINENO" 5
;;
*)
CFLAGS="${withval}"
;;
esac
else
CFLAGS="`pkg-config --silence-errors --cflags hal dbus-glib-1 2>/dev/null`"
if test "$?" != "0"; then
CFLAGS="-DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include"
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${CFLAGS}" >&5
$as_echo "${CFLAGS}" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libhal ldflags" >&5
$as_echo_n "checking for libhal ldflags... " >&6; }
# Check whether --with-hal-libs was given.
if test "${with_hal_libs+set}" = set; then :
withval=$with_hal_libs;
case "${withval}" in
yes|no)
as_fn_error $? "invalid option --with(out)-hal-libs - see docs/configure.txt" "$LINENO" 5
;;
*)
LIBS="${withval}"
;;
esac
else
LIBS="`pkg-config --silence-errors --libs hal dbus-glib-1 2>/dev/null`"
if test "$?" != "0"; then
LIBS="-lhal -ldbus-1 -lpthread"
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${LIBS}" >&5
$as_echo "${LIBS}" >&6; }
for ac_header in libhal.h
do :
ac_fn_c_check_header_compile "$LINENO" "libhal.h" "ac_cv_header_libhal_h" "$ac_includes_default
"
if test "x$ac_cv_header_libhal_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBHAL_H 1
_ACEOF
nut_have_libhal=yes
else
nut_have_libhal=no
fi
done
for ac_header in glib.h dbus/dbus-glib.h
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
"
if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
else
nut_have_libhal=no
fi
done
for ac_func in libhal_device_new_changeset
do :
ac_fn_c_check_func "$LINENO" "libhal_device_new_changeset" "ac_cv_func_libhal_device_new_changeset"
if test "x$ac_cv_func_libhal_device_new_changeset" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBHAL_DEVICE_NEW_CHANGESET 1
_ACEOF
else
nut_have_libhal=no
fi
done
if test "${nut_have_libhal}" = "yes"; then
for ac_func in g_timeout_add_seconds
do :
ac_fn_c_check_func "$LINENO" "g_timeout_add_seconds" "ac_cv_func_g_timeout_add_seconds"
if test "x$ac_cv_func_g_timeout_add_seconds" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_G_TIMEOUT_ADD_SECONDS 1
_ACEOF
fi
done
LIBHAL_CFLAGS="${CFLAGS}"
LIBHAL_LIBS="${LIBS}"
fi
CFLAGS="${CFLAGS_ORIG}"
LIBS="${LIBS_ORIG}"
fi
if test -z "${nut_have_config_libhal_seen}" -a "${nut_have_libhal}" = "yes"; then
nut_have_config_libhal_seen=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libhal user" >&5
$as_echo_n "checking for libhal user... " >&6; }
# Check whether --with-hal-user was given.
if test "${with_hal_user+set}" = set; then :
withval=$with_hal_user;
case "${withval}" in
yes|no)
as_fn_error $? "invalid option --with(out)-hal-user - see docs/configure.txt" "$LINENO" 5
;;
*)
HAL_USER="${withval}"
;;
esac
else
HAL_USER="`pkg-config --silence-errors --variable=haluser hal 2>/dev/null`"
if test "$?" != "0" -o -z "${HAL_USER}"; then
HAL_USER="haldaemon"
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${HAL_USER}" >&5
$as_echo "${HAL_USER}" >&6; }
cat >>confdefs.h <<_ACEOF
#define HAL_USER "${HAL_USER}"
_ACEOF
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libhal device match key" >&5
$as_echo_n "checking for libhal device match key... " >&6; }
# Check whether --with-hal-device-match-key was given.
if test "${with_hal_device_match_key+set}" = set; then :
withval=$with_hal_device_match_key;
case "${withval}" in
yes|no)
as_fn_error $? "invalid option --with(out)-hal-device-match-key - see docs/configure.txt" "$LINENO" 5
;;
*)
HAL_DEVICE_MATCH_KEY="${withval}"
;;
esac
else
if pkg-config --silence-errors --atleast-version=0.5.11 hal 2>/dev/null; then
HAL_DEVICE_MATCH_KEY="info.bus"
else
HAL_DEVICE_MATCH_KEY="info.subsystem"
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${HAL_DEVICE_MATCH_KEY}" >&5
$as_echo "${HAL_DEVICE_MATCH_KEY}" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libhal Callouts path" >&5
$as_echo_n "checking for libhal Callouts path... " >&6; }
# Check whether --with-hal-callouts-path was given.
if test "${with_hal_callouts_path+set}" = set; then :
withval=$with_hal_callouts_path;
case "${withval}" in
yes|no)
as_fn_error $? "invalid option --with(out)-hal-callouts-path - see docs/configure.txt" "$LINENO" 5
;;
*)
HAL_CALLOUTS_PATH="${withval}"
;;
esac
else
HAL_CALLOUTS_PATH="`pkg-config --silence-errors --variable=libexecdir hal 2>/dev/null`"
if test "$?" != "0" -o -z "${HAL_CALLOUTS_PATH}"; then
HAL_CALLOUTS_PATH="${libdir}/hal"
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${HAL_CALLOUTS_PATH}" >&5
$as_echo "${HAL_CALLOUTS_PATH}" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libhal Device Information path" >&5
$as_echo_n "checking for libhal Device Information path... " >&6; }
# Check whether --with-hal-fdi-path was given.
if test "${with_hal_fdi_path+set}" = set; then :
withval=$with_hal_fdi_path;
case "${withval}" in
yes|no)
as_fn_error $? "invalid option --with(out)-hal-fdi-path - see docs/configure.txt" "$LINENO" 5
;;
*)
HAL_FDI_PATH="${withval}"
;;
esac
else
HAL_FDI_PATH="`pkg-config --silence-errors --variable=hal_fdidir hal 2>/dev/null`"
if test "$?" != "0" -o -z "${HAL_FDI_PATH}"; then
HAL_FDI_PATH="${datarootdir}/hal/fdi/information/20thirdparty"
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${HAL_FDI_PATH}" >&5
$as_echo "${HAL_FDI_PATH}" >&6; }
fi
# Check whether --with-snmp was given.
if test "${with_snmp+set}" = set; then :
withval=$with_snmp; nut_with_snmp="${withval}"
@ -11363,62 +11080,6 @@ _ACEOF
if test "${nut_with_hal}" = "yes" -a "${nut_have_libhal}" != "yes"; then
as_fn_error $? "\"libhal not found, required for HAL support\"" "$LINENO" 5
fi
if test "${nut_with_hal}" = "yes" -a "${nut_have_libusb}" != "yes"; then
as_fn_error $? "\"libusb not found, required for HAL support\"" "$LINENO" 5
fi
if test "${nut_with_hal}" != "no"; then
if test "${nut_have_libhal}" = "yes" -a "${nut_have_libusb}" = "yes"; then
nut_with_hal="yes"
else
nut_with_hal="no"
fi
fi
if test "${nut_with_hal}" = "yes"; then
WITH_HAL_TRUE=
WITH_HAL_FALSE='#'
else
WITH_HAL_TRUE='#'
WITH_HAL_FALSE=
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable HAL support" >&5
$as_echo_n "checking whether to enable HAL support... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${nut_with_hal} " >&5
$as_echo "${nut_with_hal} " >&6; }
if test -z "${nut_report_feature_flag}"; then
nut_report_feature_flag="1"
ac_clean_files="${ac_clean_files} conf_nut_report_feature"
echo > conf_nut_report_feature
echo "Configuration summary:" >> conf_nut_report_feature
echo "======================" >> conf_nut_report_feature
fi
echo "enable HAL support: ${nut_with_hal} " >> conf_nut_report_feature
if test "${nut_with_hal}" = "yes"; then
WITH_HAL_TRUE=
WITH_HAL_FALSE='#'
else
WITH_HAL_TRUE='#'
WITH_HAL_FALSE=
fi
if test "${nut_with_hal}" = "yes"; then
cat >>confdefs.h <<_ACEOF
#define WITH_HAL 1
_ACEOF
fi
@ -11772,8 +11433,8 @@ no)
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if asciidoc version can build website (minimum required 8.6.3)" >&5
$as_echo_n "checking if asciidoc version can build website (minimum required 8.6.3)... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if asciidoc version can build manpages (minimum required 8.6.3)" >&5
$as_echo_n "checking if asciidoc version can build manpages (minimum required 8.6.3)... " >&6; }
@ -11819,8 +11480,8 @@ $as_echo "no" >&6; }
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if a2x version can build website (minimum required 8.6.3)" >&5
$as_echo_n "checking if a2x version can build website (minimum required 8.6.3)... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if a2x version can build manpages (minimum required 8.6.3)" >&5
$as_echo_n "checking if a2x version can build manpages (minimum required 8.6.3)... " >&6; }
@ -22969,6 +22630,50 @@ else
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to install FreeBSD devd.conf file" >&5
$as_echo_n "checking whether to install FreeBSD devd.conf file... " >&6; }
# Check whether --with-devd-dir was given.
if test "${with_devd_dir+set}" = set; then :
withval=$with_devd_dir;
case "${withval}" in
yes)
if test -z "${devddir}"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
as_fn_error $? "\"devd directory requested but not found\"" "$LINENO" 5
fi
;;
auto)
;;
no)
devddir=""
;;
*)
devddir="${withval}"
;;
esac
fi
if test -n "${devddir}"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using ${devddir}" >&5
$as_echo "using ${devddir}" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test -n "${devddir}"; then
WITH_DEVD_TRUE=
WITH_DEVD_FALSE='#'
else
WITH_DEVD_TRUE='#'
WITH_DEVD_FALSE=
fi
for ac_prog in asciidoc
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
@ -23215,12 +22920,7 @@ _ACEOF
ac_config_files="$ac_config_files clients/Makefile common/Makefile conf/Makefile conf/upsmon.conf.sample conf/upssched.conf.sample data/html/header.html data/html/Makefile data/Makefile data/driver.list docs/Makefile docs/man/Makefile docs/website/Makefile drivers/Makefile include/Makefile lib/libupsclient-config lib/libupsclient.pc lib/libnutclient.pc lib/libnutscan.pc lib/Makefile scripts/augeas/Makefile scripts/augeas/nutnutconf.aug scripts/augeas/nutupsconf.aug scripts/augeas/nutupsdconf.aug scripts/augeas/nutupsdusers.aug scripts/augeas/nutupsmonconf.aug scripts/augeas/nutupsschedconf.aug scripts/augeas/nuthostsconf.aug scripts/augeas/nutupssetconf.aug scripts/avahi/nut.service scripts/hal/Makefile scripts/hal/ups-nut-device.fdi scripts/hotplug/Makefile scripts/hotplug/libhidups scripts/HP-UX/nut.psf scripts/HP-UX/postinstall scripts/python/Makefile scripts/systemd/Makefile scripts/systemd/nut-driver.service scripts/systemd/nut-monitor.service scripts/systemd/nut-server.service scripts/systemd/nutshutdown scripts/Solaris/Makefile scripts/Solaris/pkginfo scripts/Solaris/postinstall scripts/Solaris/preremove scripts/Solaris/nut scripts/udev/Makefile scripts/udev/nut-ipmipsu.rules scripts/udev/nut-usbups.rules scripts/ufw/nut.ufw.profile scripts/Makefile server/Makefile tools/Makefile tools/nut-scanner/Makefile tests/Makefile Makefile"
ac_config_files="$ac_config_files clients/Makefile common/Makefile conf/Makefile conf/upsmon.conf.sample conf/upssched.conf.sample data/html/header.html data/html/Makefile data/Makefile data/driver.list docs/Makefile docs/man/Makefile drivers/Makefile include/Makefile lib/libupsclient-config lib/libupsclient.pc lib/libnutclient.pc lib/libnutscan.pc lib/Makefile scripts/augeas/Makefile scripts/augeas/nutnutconf.aug scripts/augeas/nutupsconf.aug scripts/augeas/nutupsdconf.aug scripts/augeas/nutupsdusers.aug scripts/augeas/nutupsmonconf.aug scripts/augeas/nutupsschedconf.aug scripts/augeas/nuthostsconf.aug scripts/augeas/nutupssetconf.aug scripts/avahi/nut.service scripts/devd/Makefile scripts/devd/nut-usb.conf scripts/hotplug/Makefile scripts/hotplug/libhidups scripts/HP-UX/nut.psf scripts/HP-UX/postinstall scripts/python/Makefile scripts/systemd/Makefile scripts/systemd/nut-driver.service scripts/systemd/nut-monitor.service scripts/systemd/nut-server.service scripts/systemd/nutshutdown scripts/Solaris/Makefile scripts/Solaris/pkginfo scripts/Solaris/postinstall scripts/Solaris/preremove scripts/Solaris/nut scripts/udev/Makefile scripts/udev/nut-ipmipsu.rules scripts/udev/nut-usbups.rules scripts/ufw/nut.ufw.profile scripts/Makefile server/Makefile tools/Makefile tools/nut-scanner/Makefile tests/Makefile Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
@ -23424,14 +23124,6 @@ if test -z "${WITH_CGI_TRUE}" && test -z "${WITH_CGI_FALSE}"; then
as_fn_error $? "conditional \"WITH_CGI\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${WITH_HAL_TRUE}" && test -z "${WITH_HAL_FALSE}"; then
as_fn_error $? "conditional \"WITH_HAL\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${WITH_HAL_TRUE}" && test -z "${WITH_HAL_FALSE}"; then
as_fn_error $? "conditional \"WITH_HAL\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${WITH_ASCIIDOC_TRUE}" && test -z "${WITH_ASCIIDOC_FALSE}"; then
as_fn_error $? "conditional \"WITH_ASCIIDOC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
@ -23468,6 +23160,10 @@ if test -z "${WITH_UDEV_TRUE}" && test -z "${WITH_UDEV_FALSE}"; then
as_fn_error $? "conditional \"WITH_UDEV\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${WITH_DEVD_TRUE}" && test -z "${WITH_DEVD_FALSE}"; then
as_fn_error $? "conditional \"WITH_DEVD\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${MANUALUPDATE_TRUE}" && test -z "${MANUALUPDATE_FALSE}"; then
as_fn_error $? "conditional \"MANUALUPDATE\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
@ -23873,7 +23569,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by nut $as_me 2.7.1, which was
This file was extended by nut $as_me 2.7.2, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@ -23939,7 +23635,7 @@ _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
nut config.status 2.7.1
nut config.status 2.7.2
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
@ -24457,7 +24153,6 @@ do
"data/driver.list") CONFIG_FILES="$CONFIG_FILES data/driver.list" ;;
"docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;;
"docs/man/Makefile") CONFIG_FILES="$CONFIG_FILES docs/man/Makefile" ;;
"docs/website/Makefile") CONFIG_FILES="$CONFIG_FILES docs/website/Makefile" ;;
"drivers/Makefile") CONFIG_FILES="$CONFIG_FILES drivers/Makefile" ;;
"include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
"lib/libupsclient-config") CONFIG_FILES="$CONFIG_FILES lib/libupsclient-config" ;;
@ -24475,8 +24170,8 @@ do
"scripts/augeas/nuthostsconf.aug") CONFIG_FILES="$CONFIG_FILES scripts/augeas/nuthostsconf.aug" ;;
"scripts/augeas/nutupssetconf.aug") CONFIG_FILES="$CONFIG_FILES scripts/augeas/nutupssetconf.aug" ;;
"scripts/avahi/nut.service") CONFIG_FILES="$CONFIG_FILES scripts/avahi/nut.service" ;;
"scripts/hal/Makefile") CONFIG_FILES="$CONFIG_FILES scripts/hal/Makefile" ;;
"scripts/hal/ups-nut-device.fdi") CONFIG_FILES="$CONFIG_FILES scripts/hal/ups-nut-device.fdi" ;;
"scripts/devd/Makefile") CONFIG_FILES="$CONFIG_FILES scripts/devd/Makefile" ;;
"scripts/devd/nut-usb.conf") CONFIG_FILES="$CONFIG_FILES scripts/devd/nut-usb.conf" ;;
"scripts/hotplug/Makefile") CONFIG_FILES="$CONFIG_FILES scripts/hotplug/Makefile" ;;
"scripts/hotplug/libhidups") CONFIG_FILES="$CONFIG_FILES scripts/hotplug/libhidups" ;;
"scripts/HP-UX/nut.psf") CONFIG_FILES="$CONFIG_FILES scripts/HP-UX/nut.psf" ;;

View File

@ -3,7 +3,7 @@ dnl | Network UPS Tools: configure.in |
dnl +------------------------------------------------------------------+
dnl NUT version number is defined here, with a Git suffix in include/nut_version.h
AC_INIT(nut, 2.7.1)
AC_INIT(nut, 2.7.2)
AC_CONFIG_SRCDIR(server/upsd.c)
AC_CONFIG_MACRO_DIR([m4])
echo "Network UPS Tools version ${PACKAGE_VERSION}"
@ -76,6 +76,14 @@ if test ! -d "${udevdir}"; then
fi
fi
devddir='/usr/local/etc/devd'
if test ! -d "${devddir}"; then
devddir='/etc/devd'
if test ! -d "${devddir}"; then
devddir=''
fi
fi
RUN_AS_USER="nobody"
RUN_AS_GROUP="nobody"
PIDPATH="/var/run"
@ -254,9 +262,6 @@ dnl what will be in the --with-drivers argument.
NUT_CHECK_LIBNETSNMP
NUT_CHECK_LIBUSB
NUT_ARG_WITH([hal], [build and install HAL support], [no])
NUT_CHECK_LIBHAL
NUT_CONFIG_LIBHAL
NUT_ARG_WITH([snmp], [build and install SNMP drivers], [auto])
NUT_CHECK_LIBNETSNMP
NUT_ARG_WITH([neon], [build and install neon based XML/HTTP driver], [auto])
@ -582,37 +587,13 @@ fi
NUT_REPORT_FEATURE([build CGI programs], [${nut_with_cgi}], [],
[WITH_CGI], [Define to enable CGI (HTTP) support])
dnl ----------------------------------------------------------------------
dnl checks related to --with-hal
dnl ${nut_with_hal}: any value except "yes" or "no" is treated as "auto".
if test "${nut_with_hal}" = "yes" -a "${nut_have_libhal}" != "yes"; then
AC_MSG_ERROR(["libhal not found, required for HAL support"])
fi
if test "${nut_with_hal}" = "yes" -a "${nut_have_libusb}" != "yes"; then
AC_MSG_ERROR(["libusb not found, required for HAL support"])
fi
if test "${nut_with_hal}" != "no"; then
if test "${nut_have_libhal}" = "yes" -a "${nut_have_libusb}" = "yes"; then
nut_with_hal="yes"
else
nut_with_hal="no"
fi
fi
AM_CONDITIONAL(WITH_HAL, test "${nut_with_hal}" = "yes")
NUT_REPORT_FEATURE([enable HAL support], [${nut_with_hal}], [],
[WITH_HAL], [Define to enable HAL support])
dnl ----------------------------------------------------------------------
dnl checks related to --with-doc
dnl Always check for AsciiDoc prerequisites, since even if --with-doc
dnl is set to 'no', we may still want to build the website, or some
dnl doc targets manually
dnl is set to 'no', we may still want to build some doc targets manually
NUT_CHECK_ASCIIDOC
case "${nut_with_doc}" in
@ -683,7 +664,7 @@ no)
;;
esac
AC_MSG_CHECKING([if asciidoc version can build website (minimum required 8.6.3)])
AC_MSG_CHECKING([if asciidoc version can build manpages (minimum required 8.6.3)])
AX_COMPARE_VERSION([${ASCIIDOC_VERSION}], [ge], [8.6.3], [
AC_MSG_RESULT(yes)
nut_have_asciidoc="yes"
@ -692,7 +673,7 @@ AX_COMPARE_VERSION([${ASCIIDOC_VERSION}], [ge], [8.6.3], [
nut_have_asciidoc="no"
])
AC_MSG_CHECKING([if a2x version can build website (minimum required 8.6.3)])
AC_MSG_CHECKING([if a2x version can build manpages (minimum required 8.6.3)])
AX_COMPARE_VERSION([${A2X_VERSION}], [ge], [8.6.3], [
AC_MSG_RESULT(yes)
], [
@ -1091,6 +1072,38 @@ else
fi
AM_CONDITIONAL(WITH_UDEV, test -n "${udevdir}")
dnl FreeBSD devd support:
AC_MSG_CHECKING(whether to install FreeBSD devd.conf file)
AC_ARG_WITH(devd-dir,
AS_HELP_STRING([--with-devd-dir=PATH], [where to install devd.conf file (/usr/local/etc/devd or /etc/devd)]),
[
case "${withval}" in
yes)
if test -z "${devddir}"; then
AC_MSG_RESULT(no)
AC_MSG_ERROR(["devd directory requested but not found"])
fi
;;
auto)
;;
no)
devddir=""
;;
*)
devddir="${withval}"
;;
esac
], [])
if test -n "${devddir}"; then
AC_MSG_RESULT(using ${devddir})
else
AC_MSG_RESULT(no)
fi
AM_CONDITIONAL(WITH_DEVD, test -n "${devddir}")
dnl
AC_PATH_PROGS([ASCIIDOC], [asciidoc], [none])
AM_CONDITIONAL([MANUALUPDATE], [test "x$ASCIIDOC" != "xnone"])
AC_PATH_PROGS([A2X], [a2x], [none])
@ -1151,12 +1164,6 @@ AC_SUBST(LIBWRAP_CFLAGS)
AC_SUBST(LIBWRAP_LIBS)
AC_SUBST(LIBLTDL_CFLAGS)
AC_SUBST(LIBLTDL_LIBS)
AC_SUBST(HAL_USER)
AC_SUBST(HAL_DEVICE_MATCH_KEY)
AC_SUBST(HAL_FDI_PATH)
AC_SUBST(HAL_CALLOUTS_PATH)
AC_SUBST(LIBHAL_CFLAGS)
AC_SUBST(LIBHAL_LIBS)
AC_SUBST(DRIVER_BUILD_LIST)
AC_SUBST(DRIVER_MAN_LIST)
AC_SUBST(DRIVER_INSTALL_TARGET)
@ -1174,6 +1181,7 @@ AC_SUBST(RUN_AS_GROUP)
AC_SUBST(SUN_LIBUSB)
AC_SUBST(WORDS_BIGENDIAN)
AC_SUBST(cgiexecdir)
AC_SUBST(devddir)
AC_SUBST(driverexecdir)
AC_SUBST(htmldir)
AC_SUBST(pkgconfigdir)
@ -1194,7 +1202,6 @@ AC_OUTPUT([
data/driver.list
docs/Makefile
docs/man/Makefile
docs/website/Makefile
drivers/Makefile
include/Makefile
lib/libupsclient-config
@ -1212,8 +1219,8 @@ AC_OUTPUT([
scripts/augeas/nuthostsconf.aug
scripts/augeas/nutupssetconf.aug
scripts/avahi/nut.service
scripts/hal/Makefile
scripts/hal/ups-nut-device.fdi
scripts/devd/Makefile
scripts/devd/nut-usb.conf
scripts/hotplug/Makefile
scripts/hotplug/libhidups
scripts/HP-UX/nut.psf

View File

@ -67,7 +67,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libavahi.m4 \
$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
$(top_srcdir)/m4/nut_check_libgd.m4 \
$(top_srcdir)/m4/nut_check_libhal.m4 \
$(top_srcdir)/m4/nut_check_libltdl.m4 \
$(top_srcdir)/m4/nut_check_libneon.m4 \
$(top_srcdir)/m4/nut_check_libnetsnmp.m4 \
@ -77,10 +76,9 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libusb.m4 \
$(top_srcdir)/m4/nut_check_libwrap.m4 \
$(top_srcdir)/m4/nut_check_os.m4 \
$(top_srcdir)/m4/nut_config_libhal.m4 \
$(top_srcdir)/m4/nut_report_feature.m4 \
$(top_srcdir)/m4/nut_type_socklen_t.m4 \
$(top_srcdir)/configure.in
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
@ -206,10 +204,6 @@ EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAL_CALLOUTS_PATH = @HAL_CALLOUTS_PATH@
HAL_DEVICE_MATCH_KEY = @HAL_DEVICE_MATCH_KEY@
HAL_FDI_PATH = @HAL_FDI_PATH@
HAL_USER = @HAL_USER@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@ -221,8 +215,6 @@ LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
LIBGD_CFLAGS = @LIBGD_CFLAGS@
LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
LIBHAL_LIBS = @LIBHAL_LIBS@
LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
LIBIPMI_LIBS = @LIBIPMI_LIBS@
LIBLTDL_CFLAGS = @LIBLTDL_CFLAGS@
@ -308,6 +300,7 @@ builddir = @builddir@
cgiexecdir = @cgiexecdir@
datadir = @datadir@
datarootdir = @datarootdir@
devddir = @devddir@
docdir = @docdir@
driverexecdir = @driverexecdir@
dvidir = @dvidir@

View File

@ -27,8 +27,8 @@
# ***** vendor provided protocol and hardware
#
# - driver [parameters]: mention the driver(s) (separated by "or" if there are
# several possibilities. Any mandatory parameter(s) must be referenced, as
# they will be parsed by configuration helper softwares.
# several possibilities). Any mandatory parameter(s) must be referenced, as
# they will be parsed by configuration helper software.
# For example, genericups entries must mention the "upstype=nn" format.
#
# Duplicate text in the last field will be cooked out during the conversion
@ -99,8 +99,10 @@
"Atlantis Land" "ups" "2" "A03-P826" "" "blazer_ser"
"Atlantis Land" "ups" "2" "A03-P551" "USB" "blazer_usb langid_fix=0x0409" # http://www.atlantisland.it/pub/prodotti.php?famiglia=1&l1=7&l2=24&articolo=QTAzLVA1NTE=
"Atlantis Land" "ups" "2" "HostPower 851 (A03-HP851)" "USB" "nutdrv_qx"
"Atlantis Land" "ups" "2" "LinePower 1151 (A03-OP1151)" "Serial" "nutdrv_qx"
"Atlantis Land" "ups" "2" "LinePower 1151 (A03-OP1151)" "USB" "nutdrv_qx"
"Atlantis Land" "ups" "2" "OnePower 841+ (A03-P841)" "USB" "nutdrv_qx"
"Atlantis Land" "ups" "2" "(various)" "Serial" "nutdrv_qx"
"Atlantis Land" "ups" "2" "(various)" "USB" "nutdrv_qx"
@ -154,6 +156,8 @@
"Borri" "ups" "2" "B500-R060-B/B500-R100-B" "" "blazer_usb"
"Borri" "ups" "2" "B500EVO-100-B/B500EVO-200-B" "" "blazer_usb"
"CABAC" "ups" "2" "UPS-1700DV2" "" "blazer_usb"
"Chloride" "ups" "2" "Desk Power 650" "serial port" "blazer_ser"
"Cito Power" "ups" "2" "CPG-SR1000" "" "blazer_ser"
@ -192,6 +196,7 @@
"Cyber Power Systems" "ups" "2" "CPS800AVR" "USB" "usbhid-ups"
"Cyber Power Systems" "ups" "2" "AE550" "USB" "usbhid-ups"
"Cyber Power Systems" "ups" "3" "CP 1500C" "USB" "usbhid-ups"
"Cyber Power Systems" "ups" "3" "CP825AVR-G / LE825G" "USB" "usbhid-ups" # http://www.cyberpowersystems.com/products/ups-systems/retail-products/LE825G.html
"Cyber Power Systems" "ups" "3" "OR2200LCDRM2U" "USB" "usbhid-ups"
"Cyber Power Systems" "ups" "3" "OR700LCDRM1U" "USB" "usbhid-ups"
"Cyber Power Systems" "ups" "3" "PR6000LCDRTXL5U" "USB" "usbhid-ups"
@ -241,6 +246,7 @@
"Digital Loggers" "pdu" "1" "LPC, EPCR2, DIN" "8 outlets" "powerman-pdu (experimental)"
"Digitus" "ups" "1" "DN-170014" "USB" "richcomm_usb" # http://www.digitus.info/en/products/professional-network/security-and-surveillance/power-supply/uninterrruptable-power-supplies/ups-uninterruptible-power-systems-dn-170014/section/prof/
"Digitus" "ups" "2" "DN-170020" "" "blazer_ser"
"Dynamix" "ups" "2" "UPS1700D" "" "blazer_ser"
@ -295,6 +301,7 @@
"Eaton" "pdu" "5" "ePDU Managed" "" "snmp-ups"
"Eaton" "pdu" "5" "ePDU Switched" "" "snmp-ups"
"Eaton" "pdu" "5" "ePDU Monitored" "" "snmp-ups or netxml-ups"
"Eaton" "ups" "5" "Powerware 3105" "USB" "bcmxcp_usb" # http://powerquality.eaton.com/Products-services/Backup-Power-UPS/3105-eol.aspx
"Eaton" "ups" "5" "Powerware 9130" "" "bcmxcp or usbhid-ups"
"Eaton" "ups" "5" "Powerware 9140" "" "bcmxcp or usbhid-ups"
"Eaton" "ups" "5" "Powerware 5130" "" "usbhid-ups"
@ -414,6 +421,7 @@
"Infosec" "ups" "2" "iPEL 750" "" "blazer_ser"
"Infosec" "ups" "2" "iPEL 1000" "" "blazer_ser"
"Infosec" "ups" "2" "500XP" "" "blazer_ser"
"Infosec" "ups" "2" "X2, X3, X4, E2, E3, E4" "USB" "blazer_usb"
"Infosec" "ups" "2" "XP 500" "USB" "blazer_usb"
"Infosec" "ups" "2" "XP 1000" "" "blazer_ser"
@ -437,6 +445,8 @@
"Jageson Technology" "ups" "1" "Jasuny USPS" "" "genericups upstype=4"
"Kanji" "ups" "1" "800 VA" "USB" "nutdrv_atcl_usb"
"Kebo" "ups" "2" "1200D/D Series" "" "blazer_ser"
"KOLFF" "ups" "2" "BLACK NOVA 1K/2K/3K/6K/10K/20K TOWER" "" "blazer_usb"
@ -458,6 +468,7 @@
"Liebert" "ups" "1" "GXT2-3000RT230" "" "liebert-esp2 (experimental)"
"Liebert" "ups" "2" "PowerSure Personal XT" "USB" "usbhid-ups"
"Liebert" "ups" "2" "PowerSure PSA" "USB" "usbhid-ups"
"Liebert" "ups" "2" "PowerSure PSI 1440" "USB" "usbhid-ups" # http://www.emersonnetworkpower.com/en-US/Products/ACPower/Pages/LiebertPowerSurePSILineInteractiveUPS10003000VA.aspx
"LNXI" "pdu" "1" "Icebox" "10 outlets" "powerman-pdu (experimental)"
@ -641,6 +652,7 @@
"MicroDowell" "ups" "1" "B.Box BP 750" "" "powerpanel"
"MicroDowell" "ups" "1" "B.Box BP 1000" "" "powerpanel"
"MicroDowell" "ups" "1" "B.Box BP 1500" "" "powerpanel"
"MicroDowell" "ups" "1" "B.Box LP 500" "" "genericups upstype=7"
"MicroDowell" "ups" "5" "Enterprise B8" "" "microdowell"
"MicroDowell" "ups" "5" "Enterprise B10" "" "microdowell"
"MicroDowell" "ups" "5" "Enterprise N8" "" "microdowell"
@ -674,6 +686,7 @@
"Mustek" "ups" "2" "Powermust" "600VA Plus" "blazer_ser"
"Mustek" "ups" "2" "Powermust" "800VA Pro" "blazer_ser"
"Mustek" "ups" "2" "Powermust" "1000VA Plus" "blazer_ser"
"Mustek" "ups" "2" "Powermust" "1000VA USB" "blazer_usb"
"Mustek" "ups" "2" "Powermust" "1400VA Plus" "blazer_ser"
"Mustek" "ups" "2" "Powermust" "2000VA USB" "blazer_ser"
"Mustek" "ups" "2" "Powermust Office 650" "USB" "blazer_usb"
@ -687,7 +700,10 @@
"Nitram" "ups" "1" "Elite 2002" "" "genericups upstype=16"
"Nitram" "ups" "1" "Elite 2005" "" "powerpanel"
"NUMERIC" "ups" "2" "3000 SW" "" "blazer_ser"
"Novex" "ups" "1" "NUPS-650" "USB" "blazer_usb protocol=megatec" # http://komp.1k.by/periphery-ups/novex/Novex_NUPS_650-130052.html
"Numeric" "ups" "2" "3000 SW" "" "blazer_ser"
"Numeric" "ups" "2" "Digital 800 plus" "USB" "blazer_usb"
"Oneac" "ups" "1" "ON400" "advanced interface" "oneac"
"Oneac" "ups" "1" "ON600" "advanced interface" "oneac"
@ -715,6 +731,7 @@
"OnLite" "ups" "2" "AQUA" "50" "blazer_ser"
"Opti-UPS" "ups" "1" "PowerES" "420E" "optiups"
"Opti-UPS" "ups" "1" "VS 575C" "type=OPTI" "powercom"
"Orvaldi Power Protection" "ups" "2" "various" "not 400 or 600" "blazer_ser"
"Orvaldi Power Protection" "ups" "2" "750 / 900SP" "" "blazer_usb"
@ -723,6 +740,7 @@
"Plexus" "ups" "2" "500VA" "USB" "blazer_usb"
"Plexus" "ups" "2" "1000VA Pro" "USB" "blazer_usb"
"Plexus" "ups" "1" "800 VA" "USB" "nutdrv_atcl_usb"
"Powercom" "ups" "4" "SMK" "" "blazer_ser"
"Powercom" "ups" "4" "SXL" "" "blazer_ser"
@ -888,6 +906,8 @@
"Sweex" "ups" "1" "1000" "USB" "richcomm_usb"
"Sweex" "ups" "2" "(various)" "" "blazer_ser"
"Syndome" "ups" "2" "Era 500VA" "USB" "blazer_usb"
"Sysgration" "ups" "2" "UPGUARDS Pro650" "" "blazer_ser"
"Tecnoware" "ups" "2" "Easy Power 1200" "" "blazer_ser"
@ -1068,6 +1088,9 @@
"Voltronic Power" "ups" "2" "Frigate TX 1KVA" "USB" "nutdrv_qx"
"Voltronic Power" "ups" "2" "Galleon 1KVA" "Serial" "nutdrv_qx"
"Voltronic Power" "ups" "2" "Galleon 1KVA" "USB" "nutdrv_qx"
"Voltronic Power" "ups" "2" "Prosine 800" "Serial" "nutdrv_qx"
"Voltronic Power" "ups" "2" "Prosine 800" "USB" "nutdrv_qx"
"Voltronic Power" "ups" "2" "Vesta LED 850VA" "USB" "nutdrv_qx"
"Voltronic Power" "ups" "2" "(various)" "Serial" "nutdrv_qx"
"Voltronic Power" "ups" "2" "(various)" "USB" "nutdrv_qx"

View File

@ -65,7 +65,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libavahi.m4 \
$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
$(top_srcdir)/m4/nut_check_libgd.m4 \
$(top_srcdir)/m4/nut_check_libhal.m4 \
$(top_srcdir)/m4/nut_check_libltdl.m4 \
$(top_srcdir)/m4/nut_check_libneon.m4 \
$(top_srcdir)/m4/nut_check_libnetsnmp.m4 \
@ -75,10 +74,9 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libusb.m4 \
$(top_srcdir)/m4/nut_check_libwrap.m4 \
$(top_srcdir)/m4/nut_check_os.m4 \
$(top_srcdir)/m4/nut_config_libhal.m4 \
$(top_srcdir)/m4/nut_report_feature.m4 \
$(top_srcdir)/m4/nut_type_socklen_t.m4 \
$(top_srcdir)/configure.in
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
@ -165,10 +163,6 @@ EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAL_CALLOUTS_PATH = @HAL_CALLOUTS_PATH@
HAL_DEVICE_MATCH_KEY = @HAL_DEVICE_MATCH_KEY@
HAL_FDI_PATH = @HAL_FDI_PATH@
HAL_USER = @HAL_USER@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@ -180,8 +174,6 @@ LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
LIBGD_CFLAGS = @LIBGD_CFLAGS@
LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
LIBHAL_LIBS = @LIBHAL_LIBS@
LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
LIBIPMI_LIBS = @LIBIPMI_LIBS@
LIBLTDL_CFLAGS = @LIBLTDL_CFLAGS@
@ -267,6 +259,7 @@ builddir = @builddir@
cgiexecdir = @cgiexecdir@
datadir = @datadir@
datarootdir = @datarootdir@
devddir = @devddir@
docdir = @docdir@
driverexecdir = @driverexecdir@
dvidir = @dvidir@

View File

@ -185,7 +185,7 @@ UPS.
This is also a good option to consider if you can't use networked
monitoring code for security or safety reasons.
See ideas.txt for more on this and other related topics.
See the TODO file for more on this and other related topics.
== Why isn't upssched part of upsmon?
@ -219,12 +219,13 @@ a shell script and make upsmon call it. Everyone wins.
There are at least two different protocols being used for hardware
with very similar names. The bestups driver tends to support the
units built around the newer "PhoenixTec" protocol.
units built around the newer "PhoenixTec" protocol, and the bestfortress
driver supports the older Best hardware.
Previous releases of this software included a driver called
bestfortress which supported the older Best hardware. See the
earlier entries about updating old drivers which have been removed
from the tree.
There is a similar problem with the tripplite_usb driver: it only supports the
older, proprietary protocol. Newer standards-compliant Tripp Lite UPS models
are supported by usbhid-ups. We name drivers based on the information
available at that time, which often is incomplete.
== What's this about 'data stale'?
@ -262,7 +263,7 @@ running. Maybe your state path is not configured properly.
Check your syslog. upsd will complain regularly if it can't
connect to a driver, and it should say why it can't connect.
Note: if you jumped in with both feet and didn't follow the INSTALL
Note: if you jumped in with both feet and didn't follow the INSTALL.nut
document, you probably started upsd by itself. You have to run
'upsdrvctl start' to start the drivers after configuring ups.conf.
@ -285,7 +286,7 @@ might look like this:
if (test -f /etc/killpower)
then
/usr/local/ups/bin/upsdrvctl shutdown
/usr/local/ups/sbin/upsdrvctl shutdown
sleep 600 # this should never return
@ -342,7 +343,7 @@ same effect with the following command:
The following pages have some slightly more kludgy answers which involve the
use of `setpci`, and are highly model-specific:
- http://mythic-beasts.com/support/macminicolo_howto.html
- https://www.mythic-beasts.com/support/servers/colo/macminicolo_howto
- http://superuser.com/questions/212434/reboot-after-power-failure-for-mac-running-ubuntu
- http://ubuntuforums.org/showthread.php?t=1209576
@ -359,7 +360,7 @@ solution.
== My Mac won't power back up by itself into Mac OS X after the UPS shuts down. What can I do about this?
This is relatively simple to fix. If you have console or VNC access, log in as
an administrator, go to System Preferences, click on energy saver, click on the
an administrator, go to System Preferences, click on Energy Saver, click on the
options tab, check "Restart automatically after a power failure".
Alternatively, you can connect via SSH and run "sudo pmset autorestart 1" to
@ -387,7 +388,7 @@ For my development system this yields the following /dev entries:
- Switch to root, then start the drivers:
# /usr/local/ups/bin/upsdrvctl -u nutdev start
# /usr/local/ups/sbin/upsdrvctl -u nutdev start
- The listing for /var/state/ups then looks like this:
@ -492,11 +493,12 @@ any of the user accounts which run inside the jail.
== upsd is running, so why can't I connect to it?
Assuming you haven't changed the TCP port number on the command line
or at compile-time, then you probably have some sort of firewall
blocking the connection.
Assuming you haven't changed the TCP port number on the command line or at
compile-time, then you may have some sort of firewall blocking the connection.
upsd listens on TCP port 3493 by default.
upsd listens on TCP port 3493 by default. If you do not specify a LISTEN
directive in upsd.conf, upsd only listens on the loopback interface. See the
upsd.conf man page for details.
== How do you make upsmon reload the config file?
@ -759,7 +761,7 @@ Implement this by modifying your shutdown script like this:
if (test -f /etc/killpower)
then
/usr/local/ups/bin/upsdrvctl shutdown
/usr/local/ups/sbin/upsdrvctl shutdown
sleep 120

View File

@ -16,8 +16,7 @@ SHARED_DEPS = nut-names.txt asciidoc.conf
USER_MANUAL_DEPS = acknowledgements.txt cables.txt config-notes.txt \
configure.txt download.txt documentation.txt features.txt history.txt \
outlets.txt scheduling.txt security.txt support.txt user-manual.txt \
stable-hcl.txt
outlets.txt scheduling.txt security.txt support.txt user-manual.txt
DEVELOPER_GUIDE_DEPS = contact-closure.txt design.txt developers.txt \
developer-guide.txt hid-subdrivers.txt macros.txt new-clients.txt \
@ -36,11 +35,12 @@ CABLES_IMAGES = images/cables/73-0724.png images/cables/940-0024C.jpg \
images/cables/SOLA-330.png
ALL_TXT_SRC = nut-names.txt $(USER_MANUAL_DEPS) $(DEVELOPER_GUIDE_DEPS) \
$(CABLES_DEPS) FAQ.txt nut-hal.txt nut-qa.txt packager-guide.txt snmp.txt
$(CABLES_DEPS) FAQ.txt nut-qa.txt packager-guide.txt snmp.txt
NUT_SPELL_DICT = nut.dict
EXTRA_DIST = $(ALL_TXT_SRC) $(SHARED_DEPS) $(IMAGE_FILES) \
$(CABLES_IMAGES) docinfo.xml $(NUT_SPELL_DICT)
$(CABLES_IMAGES) docinfo.xml $(NUT_SPELL_DICT) \
common.xsl xhtml.xsl chunked.xsl
ASCIIDOC_HTML_SINGLE = user-manual.html \
developer-guide.html \
@ -55,10 +55,10 @@ ASCIIDOC_HTML_CHUNKED = user-manual.chunked \
ASCIIDOC_PDF = user-manual.pdf \
developer-guide.pdf \
packager-guide.pdf \
cables.pdf \
FAQ.pdf
# Force build in ./ and man/ before website
SUBDIRS = . man website
SUBDIRS = man
SUFFIXES = .txt .html .pdf
all: doc
@ -70,27 +70,13 @@ pdf: $(ASCIIDOC_PDF)
html-single: $(ASCIIDOC_HTML_SINGLE)
html-chunked: $(ASCIIDOC_HTML_CHUNKED)
if HAVE_ASCIIDOC
website: html-chunked pdf
else !HAVE_ASCIIDOC
website:
@echo "Not building website documentation since 'asciidoc' was not found."
endif !HAVE_ASCIIDOC
clean-local:
rm -rf *.pdf *.html *.chunked docbook-xsl.css *.bak
# Static HCL is generated automatically
# This is more of a harness, since this file should have already been
# generated, due to the top level Makefile SUBDIRS ordering (tools before docs)
ups-html.txt: ../data/driver.list.in
cd ../data && $(MAKE) $(AM_MAKEFLAGS) driver.list
cd ../tools && $(MAKE) $(AM_MAKEFLAGS) website
### TODO: automatic dependency generation
# Add other directory deps (not for local EXTRA_DIST) and generated contents
FULL_USER_MANUAL_DEPS = $(USER_MANUAL_DEPS) $(SHARED_DEPS) ../README \
../INSTALL ../UPGRADING ../TODO ../scripts/ufw/README
../INSTALL.nut ../UPGRADING ../TODO ../scripts/ufw/README
FULL_DEVELOPER_GUIDE_DEPS = $(DEVELOPER_GUIDE_DEPS) $(SHARED_DEPS) \
../scripts/augeas/README ../TODO ../lib/README \
../tools/nut-scanner/README
@ -112,11 +98,11 @@ A2X_COMMON_OPTS = $(ASCIIDOC_VERBOSE) --attribute icons \
--attribute tree_version=@TREE_VERSION@ \
-a toc -a numbered --destination-dir=.
.txt.html:
$(A2X) $(A2X_COMMON_OPTS) --attribute=xhtml11_format --format=xhtml $<
.txt.html: common.xsl xhtml.xsl
$(A2X) $(A2X_COMMON_OPTS) --attribute=xhtml11_format --format=xhtml --xsl-file=$(srcdir)/xhtml.xsl $<
.txt.chunked:
$(A2X) $(A2X_COMMON_OPTS) --attribute=chunked_format --format=chunked $<
.txt.chunked: common.xsl chunked.xsl
$(A2X) $(A2X_COMMON_OPTS) --attribute=chunked_format --format=chunked --xsl-file=$(srcdir)/chunked.xsl $<
.txt.pdf: docinfo.xml
$(A2X) $(A2X_COMMON_OPTS) --attribute=pdf_format --format=pdf -a docinfo1 $<
@ -144,4 +130,4 @@ spellcheck-interactive:
@echo "Documentation spell check not available since 'aspell' was not found."
endif !HAVE_ASPELL
.PHONY: html html-single pdf website
.PHONY: html html-single pdf

View File

@ -63,7 +63,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libavahi.m4 \
$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
$(top_srcdir)/m4/nut_check_libgd.m4 \
$(top_srcdir)/m4/nut_check_libhal.m4 \
$(top_srcdir)/m4/nut_check_libltdl.m4 \
$(top_srcdir)/m4/nut_check_libneon.m4 \
$(top_srcdir)/m4/nut_check_libnetsnmp.m4 \
@ -73,10 +72,9 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libusb.m4 \
$(top_srcdir)/m4/nut_check_libwrap.m4 \
$(top_srcdir)/m4/nut_check_os.m4 \
$(top_srcdir)/m4/nut_config_libhal.m4 \
$(top_srcdir)/m4/nut_report_feature.m4 \
$(top_srcdir)/m4/nut_type_socklen_t.m4 \
$(top_srcdir)/configure.in
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
@ -173,10 +171,6 @@ EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAL_CALLOUTS_PATH = @HAL_CALLOUTS_PATH@
HAL_DEVICE_MATCH_KEY = @HAL_DEVICE_MATCH_KEY@
HAL_FDI_PATH = @HAL_FDI_PATH@
HAL_USER = @HAL_USER@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@ -188,8 +182,6 @@ LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
LIBGD_CFLAGS = @LIBGD_CFLAGS@
LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
LIBHAL_LIBS = @LIBHAL_LIBS@
LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
LIBIPMI_LIBS = @LIBIPMI_LIBS@
LIBLTDL_CFLAGS = @LIBLTDL_CFLAGS@
@ -275,6 +267,7 @@ builddir = @builddir@
cgiexecdir = @cgiexecdir@
datadir = @datadir@
datarootdir = @datarootdir@
devddir = @devddir@
docdir = @docdir@
driverexecdir = @driverexecdir@
dvidir = @dvidir@
@ -334,8 +327,7 @@ IMAGE_FILES = images/asciidoc.png \
SHARED_DEPS = nut-names.txt asciidoc.conf
USER_MANUAL_DEPS = acknowledgements.txt cables.txt config-notes.txt \
configure.txt download.txt documentation.txt features.txt history.txt \
outlets.txt scheduling.txt security.txt support.txt user-manual.txt \
stable-hcl.txt
outlets.txt scheduling.txt security.txt support.txt user-manual.txt
DEVELOPER_GUIDE_DEPS = contact-closure.txt design.txt developers.txt \
developer-guide.txt hid-subdrivers.txt macros.txt new-clients.txt \
@ -354,11 +346,12 @@ CABLES_IMAGES = images/cables/73-0724.png images/cables/940-0024C.jpg \
images/cables/SOLA-330.png
ALL_TXT_SRC = nut-names.txt $(USER_MANUAL_DEPS) $(DEVELOPER_GUIDE_DEPS) \
$(CABLES_DEPS) FAQ.txt nut-hal.txt nut-qa.txt packager-guide.txt snmp.txt
$(CABLES_DEPS) FAQ.txt nut-qa.txt packager-guide.txt snmp.txt
NUT_SPELL_DICT = nut.dict
EXTRA_DIST = $(ALL_TXT_SRC) $(SHARED_DEPS) $(IMAGE_FILES) \
$(CABLES_IMAGES) docinfo.xml $(NUT_SPELL_DICT)
$(CABLES_IMAGES) docinfo.xml $(NUT_SPELL_DICT) \
common.xsl xhtml.xsl chunked.xsl
ASCIIDOC_HTML_SINGLE = user-manual.html \
developer-guide.html \
@ -373,17 +366,16 @@ ASCIIDOC_HTML_CHUNKED = user-manual.chunked \
ASCIIDOC_PDF = user-manual.pdf \
developer-guide.pdf \
packager-guide.pdf \
cables.pdf \
FAQ.pdf
# Force build in ./ and man/ before website
SUBDIRS = . man website
SUBDIRS = man
SUFFIXES = .txt .html .pdf
### TODO: automatic dependency generation
# Add other directory deps (not for local EXTRA_DIST) and generated contents
FULL_USER_MANUAL_DEPS = $(USER_MANUAL_DEPS) $(SHARED_DEPS) ../README \
../INSTALL ../UPGRADING ../TODO ../scripts/ufw/README
../INSTALL.nut ../UPGRADING ../TODO ../scripts/ufw/README
FULL_DEVELOPER_GUIDE_DEPS = $(DEVELOPER_GUIDE_DEPS) $(SHARED_DEPS) \
../scripts/augeas/README ../TODO ../lib/README \
@ -760,29 +752,18 @@ pdf: $(ASCIIDOC_PDF)
html-single: $(ASCIIDOC_HTML_SINGLE)
html-chunked: $(ASCIIDOC_HTML_CHUNKED)
@HAVE_ASCIIDOC_TRUE@website: html-chunked pdf
@HAVE_ASCIIDOC_FALSE@website:
@HAVE_ASCIIDOC_FALSE@ @echo "Not building website documentation since 'asciidoc' was not found."
clean-local:
rm -rf *.pdf *.html *.chunked docbook-xsl.css *.bak
# Static HCL is generated automatically
# This is more of a harness, since this file should have already been
# generated, due to the top level Makefile SUBDIRS ordering (tools before docs)
ups-html.txt: ../data/driver.list.in
cd ../data && $(MAKE) $(AM_MAKEFLAGS) driver.list
cd ../tools && $(MAKE) $(AM_MAKEFLAGS) website
user-manual.html user-manual.chunked user-manual.pdf: $(FULL_USER_MANUAL_DEPS)
developer-guide.html developer-guide.chunked developer-guide.pdf: $(FULL_DEVELOPER_GUIDE_DEPS)
packager-guide.html packager-guide.chunked packager-guide.pdf: packager-guide.txt asciidoc.conf
.txt.html:
$(A2X) $(A2X_COMMON_OPTS) --attribute=xhtml11_format --format=xhtml $<
.txt.html: common.xsl xhtml.xsl
$(A2X) $(A2X_COMMON_OPTS) --attribute=xhtml11_format --format=xhtml --xsl-file=$(srcdir)/xhtml.xsl $<
.txt.chunked:
$(A2X) $(A2X_COMMON_OPTS) --attribute=chunked_format --format=chunked $<
.txt.chunked: common.xsl chunked.xsl
$(A2X) $(A2X_COMMON_OPTS) --attribute=chunked_format --format=chunked --xsl-file=$(srcdir)/chunked.xsl $<
.txt.pdf: docinfo.xml
$(A2X) $(A2X_COMMON_OPTS) --attribute=pdf_format --format=pdf -a docinfo1 $<
@ -807,7 +788,7 @@ packager-guide.html packager-guide.chunked packager-guide.pdf: packager-guide.tx
@HAVE_ASPELL_FALSE@spellcheck-interactive:
@HAVE_ASPELL_FALSE@ @echo "Documentation spell check not available since 'aspell' was not found."
.PHONY: html html-single pdf website
.PHONY: html html-single pdf
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.

View File

@ -21,8 +21,8 @@ Active members
- Arnaud Quette: project leader (since 2005), Debian packager and jack of all trades
- Charles Lepple: senior lieutenant
- Frederic Bohe: senior developer
- Emilien Kia: senior developer
- Daniele Pezzini: senior developer
- Václav Krpec: junior developer
- Kjell Claesson: senior developer
- Alexander Gordeev: junior developer
@ -36,7 +36,7 @@ Active members
- Antoine Colombier: trainee
For an up to date list of NUT developers, refer to
link:https://alioth.debian.org/project/memberlist.php?group_id=30602[Alioth].
link:https://github.com/orgs/networkupstools/members[GitHub].
Retired members
~~~~~~~~~~~~~~~
@ -56,26 +56,8 @@ blazer_ser and blazer_usb
- Dominique Lallement: Consultant (chairman of the USB/HID PDC Forum)
- Julius Malkiewicz: junior developer
- Tomas Smetana: former Redhat packager (2007-2008)
- Frederic Bohe: senior developer, Eaton contractor (2009-2013)
[[Eaton]]
Our main supporter: Eaton
-------------------------
Through the acquisition of MGE Office Protection Systems (a carve out of
the MGE UPS SYSTEMS small systems, up to 10 KVA), Eaton has been supporting
NUT, and more generally the Free/Libre Opensource Software Community
since around 2002.
This support includes the following actions:
- providing extensive technical documents (Eaton protocols library),
- providing units to developers of NUT and related projects,
- hosting the networkupstools.org webserver (from 2005 to August 2012),
- providing artwork,
- promoting NUT in general.
For more detailed information on Eaton's Opensource commitment, please refer to
link:http://opensource.eaton.com[Eaton Opensource website].
Supporting manufacturers
------------------------
@ -83,27 +65,46 @@ Supporting manufacturers
UPS manufacturers
~~~~~~~~~~~~~~~~~
- link:http://powerquality.eaton.com[Eaton], our main supporter, as presented in
the <<Eaton,above section>>.
[[Eaton]]
* link:http://powerquality.eaton.com[Eaton], has been the main NUT supporter in
the past, between 2007 and 2011, continuing MGE UPS SYSTEMS efforts.
As such, Eaton has been:
- providing extensive technical documents (Eaton protocols library),
- providing units to developers of NUT and related projects,
- hosting the networkupstools.org webserver (from 2007 to August 2012),
- providing artwork,
- promoting NUT in general,
- supporting its customers using NUT.
+
[WARNING]
================================================================================
*The situation has evolved, and since 2011 Eaton does not support NUT anymore.*
- link:http://www.gamatronic.com[Gamatronic], through Nadav Moskovitch, has
*This may still evolve in the future.*
*But for now, please do not consider anymore that buying Eaton products will
provide you with official support from Eaton, or a better level of device
support in NUT.*
================================================================================
* link:http://www.gamatronic.com[Gamatronic], through Nadav Moskovitch, has
revived the 'sec' driver (as gamatronic), and expanded a bit genericups for its
UPSs with alarm interface.
- link:http://www.microdowell.com[Microdowell], through Elio Corbolante, has
* link:http://www.microdowell.com[Microdowell], through Elio Corbolante, has
created the 'microdowell' driver to support the Enterprise Nxx/Bxx serial devices.
They also proposes NUT as an alternative to its software for
link:http://www.microdowell.com/fra/download.html[Linux / Unix].
- link:http://pcmups.com.tw[Powercom], through Alexey Morozov, has provided
* link:http://pcmups.com.tw[Powercom], through Alexey Morozov, has provided
link:ups-protocols.html[extensive information] on its USB/HID devices, along
with development units.
- link:http://www.riello-ups.com[Riello UPS], through Massimo Zampieri, has
* link:http://www.riello-ups.com[Riello UPS], through Massimo Zampieri, has
provided link:ups-protocols.html[all protocols information]. Elio Parisi has
also created riello_ser and riello_usb to support these protocols.
- link:http://www.tripplite.com[Tripp Lite], through Eric Cobb, has provided
* link:http://www.tripplite.com[Tripp Lite], through Eric Cobb, has provided
test results from connecting their HID-compliant UPS hardware to NUT. Some of
this information has been incorporated into the NUT hardware compatibility
list, and the rest of the information is available via the
@ -133,13 +134,14 @@ safenet driver.
Older entries (before 2005)
---------------------------
- MGE UPS SYSTEMS was the previous NUT sponsor. They provided protocols
information, many units for development of NUT-related projects.
- MGE UPS SYSTEMS was the previous NUT sponsor, from 2002 until its partial
acquisition by Eaton. They provided protocols information, many units for
development of NUT-related projects.
Several drivers such as mge-utalk, mge-shut, snmp-ups, hidups, and usbhid-ups
are the result of this collaboration, in addition to the WMNut, MGE HID Parser
the libhid projects, ... through Arnaud.
All the MGE supporters have now gone with Eaton (through MGE Office
Protection Systems), which is the new NUT sponsor.
the libhid projects, ... through Arnaud Quette (who was also an MGE employee).
All the MGE supporters have gone with Eaton (through MGE Office Protection
Systems), which was temporarily the new NUT sponsor.
- Fenton Technologies contributed a PowerPal 660 to the project. Their open
stance and quick responses to technical inquiries were appreciated for

22
docs/chunked.xsl Normal file
View File

@ -0,0 +1,22 @@
<!--
Generates chunked XHTML documents from DocBook XML source using DocBook XSL
stylesheets.
NOTE: The URL reference to the current DocBook XSL stylesheets is
rewritten to point to the copy on the local disk drive by the XML catalog
rewrite directives so it doesn't need to go out to the Internet for the
stylesheets. This means you don't need to edit the <xsl:import> elements on
a machine by machine basis.
-->
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:import href="http://docbook.sourceforge.net/release/xsl/current/xhtml/chunk.xsl"/>
<xsl:import href="common.xsl"/>
<xsl:param name="navig.graphics.path">images/icons/</xsl:param>
<xsl:param name="admon.graphics.path">images/icons/</xsl:param>
<xsl:param name="callout.graphics.path" select="'images/icons/callouts/'"/>
<!-- Format-detection to prevent smartphones from being too smart -->
<xsl:template name="user.head.content">
<meta name="format-detection" content="telephone=no" />
</xsl:template>
</xsl:stylesheet>

106
docs/common.xsl Normal file
View File

@ -0,0 +1,106 @@
<!--
Inlcuded in xhtml.xsl, xhtml.chunked.xsl, htmlhelp.xsl.
Contains common XSL stylesheets parameters.
Output documents styled by docbook.css.
-->
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:param name="html.stylesheet" select="'docbook-xsl.css'"/>
<xsl:param name="htmlhelp.chm" select="'htmlhelp.chm'"/>
<xsl:param name="htmlhelp.hhc.section.depth" select="5"/>
<xsl:param name="section.autolabel">
<xsl:choose>
<xsl:when test="/processing-instruction('asciidoc-numbered')">1</xsl:when>
<xsl:otherwise>0</xsl:otherwise>
</xsl:choose>
</xsl:param>
<xsl:param name="suppress.navigation" select="0"/>
<xsl:param name="navig.graphics.extension" select="'.png'"/>
<xsl:param name="navig.graphics" select="0"/>
<xsl:param name="navig.graphics.path">images/icons/</xsl:param>
<xsl:param name="navig.showtitles">0</xsl:param>
<xsl:param name="shade.verbatim" select="0"/>
<xsl:attribute-set name="shade.verbatim.style">
<xsl:attribute name="border">0</xsl:attribute>
<xsl:attribute name="background-color">#E0E0E0</xsl:attribute>
</xsl:attribute-set>
<xsl:param name="admon.graphics" select="1"/>
<xsl:param name="admon.graphics.path">images/icons/</xsl:param>
<xsl:param name="admon.graphics.extension" select="'.png'"/>
<xsl:param name="admon.style">
<xsl:text>margin-left: 0; margin-right: 10%;</xsl:text>
</xsl:param>
<xsl:param name="admon.textlabel" select="1"/>
<xsl:param name="callout.defaultcolumn" select="'60'"/>
<xsl:param name="callout.graphics.extension" select="'.png'"/>
<xsl:param name="callout.graphics" select="'1'"/>
<xsl:param name="callout.graphics.number.limit" select="'10'"/>
<xsl:param name="callout.graphics.path" select="'images/icons/callouts/'"/>
<xsl:param name="callout.list.table" select="'1'"/>
<!-- This does not seem to work. -->
<xsl:param name="section.autolabel.max.depth" select="2"/>
<xsl:param name="chunk.first.sections" select="1"/>
<xsl:param name="chunk.section.depth" select="1"/>
<xsl:param name="chunk.quietly" select="0"/>
<xsl:param name="chunk.toc" select="''"/>
<xsl:param name="chunk.tocs.and.lots" select="0"/>
<xsl:param name="html.cellpadding" select="'4px'"/>
<xsl:param name="html.cellspacing" select="''"/>
<xsl:param name="table.borders.with.css" select="1"/>
<xsl:param name="table.cell.border.color" select="'#527bbd'"/>
<xsl:param name="table.cell.border.style" select="'solid'"/>
<xsl:param name="table.cell.border.thickness" select="'1px'"/>
<xsl:param name="table.footnote.number.format" select="'a'"/>
<xsl:param name="table.footnote.number.symbols" select="''"/>
<xsl:param name="table.frame.border.color" select="'#527bbd'"/>
<xsl:param name="table.frame.border.style" select="'solid'"/>
<xsl:param name="table.frame.border.thickness" select="'3px'"/>
<xsl:param name="tablecolumns.extension" select="'1'"/>
<xsl:param name="highlight.source" select="1"/>
<xsl:param name="section.label.includes.component.label" select="1"/>
<!--
Table of contents inserted by <?asciidoc-toc?> processing instruction.
-->
<xsl:param name="generate.toc">
<xsl:choose>
<xsl:when test="/processing-instruction('asciidoc-toc')">
article toc,title
book toc,title,figure,table,example,equation
<!-- The only way I could find that suppressed book chapter TOCs -->
<xsl:if test="$generate.section.toc.level != 0">
chapter toc,title
part toc,title
preface toc,title
qandadiv toc
qandaset toc
reference toc,title
sect1 toc
sect2 toc
sect3 toc
sect4 toc
sect5 toc
section toc
set toc,title
</xsl:if>
</xsl:when>
<xsl:otherwise>
article nop
book nop
</xsl:otherwise>
</xsl:choose>
</xsl:param>
</xsl:stylesheet>

View File

@ -158,14 +158,14 @@ Starting the driver(s)
Start the driver(s) for your hardware:
/usr/local/ups/bin/upsdrvctl start
/usr/local/ups/sbin/upsdrvctl start
Make sure the driver doesn't report any errors. It should show a
few details about the hardware and then enter the background. You
should get back to the command prompt a few seconds later. For
reference, a successful start of the `usbhid-ups` driver looks like this:
# /usr/local/ups/bin/upsdrvctl start
# /usr/local/ups/sbin/upsdrvctl start
Network UPS Tools - Generic HID driver 0.34 (2.4.1)
USB communication driver 0.31
Using subdriver: MGE HID 1.12

View File

@ -112,14 +112,6 @@ more information.
Enable IPv6 support.
--with-hal (default: no)
Build and install Hardware Abstraction Layer support.
If you own a USB unit, only protect your local system and run the
Gnome or KDE desktop, this will enable a full Plug & Play usage.
See docs/nut-hal.txt for additional information on how to set up
and use HAL support.
--with-avahi (default: auto-detect)
Build and install Avahi support, to publish NUT server availability
@ -173,7 +165,7 @@ for this software.
If you use one of the --with-user and --with-group options, then
you have to use the other one too.
See the INSTALL document and the FAQ for more on this topic.
See the INSTALL.nut document and the FAQ for more on this topic.
--with-logfacility=FACILITY
@ -349,21 +341,6 @@ compiler flags that are needed.
--with-neon-libs, --with-libltdl-libs
--with-powerman-libs="-L/foo/bar -labcd -lxyz"
If your system doesn't have pkg-config and support for any of the above
libraries isn't found (but you know it is installed), you must specify the
linker flags that are needed.
HAL addons (deprecated)
-----------------------
--with-hal-includes="-DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/hal \
-I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include"
--with-hal-libs="-lhal -ldbus-1 -lpthread"
--with-hal-user="haldaemon"
--with-hal-device-match-key="info.bus"
--with-hal-callouts-path="${libdir}/hal"
--with-hal-fdi-path="${datarootdir}/hal/fdi/information/20thirdparty"
If system doesn't have pkg-config or it fails to provides hints for some of the
settings that are needed to set it up properly and the build in defaults are
not right, you can specify the right variables here.

View File

@ -84,9 +84,7 @@ will get the right headers on every system.
Device drivers - main.c
-----------------------
The device drivers use main.c as their core. The only exceptions are the
HAL-based drivers, which use the same dstate function calls while integrating
with the DBUS event loop.
The device drivers use main.c as their core.
To write a new driver, you create a file with a series of support
functions that will be called by main. These all have names that start

View File

@ -9,7 +9,7 @@ User Documentation
ifdef::website[]
- FAQ - Frequently Asked Questions (link:docs/FAQ.html[online]) (link:docs/FAQ.pdf[PDF])
- NUT User Manual (link:docs/user-manual.chunked/index.html[online]) (link:docs/user-manual.pdf[PDF])
- Cables information (link:cables.html[online]) (link:cables.pdf[PDF])
- Cables information (link:cables.html[online]) (link:docs/cables.pdf[PDF])
- link:docs/man/index.html#User_man[User manual pages]
endif::website[]
ifndef::website[]

View File

@ -58,19 +58,6 @@ WARNING: Be sure to plug your network's physical hardware (switches, hubs,
routers, bridges, ...) into the UPS!
////////////////////////////////////////////////////////////////////////////////
*FIXME* to be removed?
- This has also allowed us to create easily the Power Management integration.
=== Power Management integration ===
- Thanks to its modular design, NUT can feed data to the FreeDesktop Hardware Abstraction Layer (HAL).[[BR]]
This allow a seemless integration of USB UPSs, at a small cost (around 200 Kb), reusing the standard Power Management GUIs and providing to users a full Plug & Play system.
- The added bonus is that this is the best Power Management existing, surpassing the one that exist on Windows and Mac OS, both in terms of devices supported and of features.
////////////////////////////////////////////////////////////////////////////////
Redundancy support - Hot swap/high availability power supplies
--------------------------------------------------------------

View File

@ -12,7 +12,6 @@ directory.
#define a replacement if necessary.
- NUT_CHECK_LIBGD
- NUT_CHECK_LIBHAL
- NUT_CHECK_LIBNEON
- NUT_CHECK_LIBNETSNMP
- NUT_CHECK_LIBPOWERMAN

View File

@ -446,6 +446,7 @@ SRC_USB_LIBUSB_PAGES = \
bcmxcp_usb.txt \
blazer-common.txt \
blazer_usb.txt \
nutdrv_atcl_usb.txt \
nutdrv_qx.txt \
richcomm_usb.txt \
riello_usb.txt \
@ -455,6 +456,7 @@ SRC_USB_LIBUSB_PAGES = \
MAN_USB_LIBUSB_PAGES = \
bcmxcp_usb.8 \
blazer_usb.8 \
nutdrv_atcl_usb.8 \
nutdrv_qx.8 \
richcomm_usb.8 \
riello_usb.8 \
@ -469,6 +471,7 @@ HTML_USB_LIBUSB_MANS = \
bcmxcp_usb.html \
blazer_usb.html \
nutdrv_qx.html \
nutdrv_atcl_usb.html \
richcomm_usb.html \
riello_usb.html \
tripplite_usb.html \
@ -566,10 +569,7 @@ HTML_MANS = \
all:
man-index.html: index.html
cp -f $< $@
html-man: $(HTML_MANS) man-index.html
html-man: $(HTML_MANS) index.html
CLEANFILES = *.xml *.html

View File

@ -91,7 +91,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libavahi.m4 \
$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
$(top_srcdir)/m4/nut_check_libgd.m4 \
$(top_srcdir)/m4/nut_check_libhal.m4 \
$(top_srcdir)/m4/nut_check_libltdl.m4 \
$(top_srcdir)/m4/nut_check_libneon.m4 \
$(top_srcdir)/m4/nut_check_libnetsnmp.m4 \
@ -101,10 +100,9 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
$(top_srcdir)/m4/nut_check_libusb.m4 \
$(top_srcdir)/m4/nut_check_libwrap.m4 \
$(top_srcdir)/m4/nut_check_os.m4 \
$(top_srcdir)/m4/nut_config_libhal.m4 \
$(top_srcdir)/m4/nut_report_feature.m4 \
$(top_srcdir)/m4/nut_type_socklen_t.m4 \
$(top_srcdir)/configure.in
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
@ -196,10 +194,6 @@ EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
HAL_CALLOUTS_PATH = @HAL_CALLOUTS_PATH@
HAL_DEVICE_MATCH_KEY = @HAL_DEVICE_MATCH_KEY@
HAL_FDI_PATH = @HAL_FDI_PATH@
HAL_USER = @HAL_USER@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@ -211,8 +205,6 @@ LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
LIBGD_CFLAGS = @LIBGD_CFLAGS@
LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
LIBHAL_LIBS = @LIBHAL_LIBS@
LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
LIBIPMI_LIBS = @LIBIPMI_LIBS@
LIBLTDL_CFLAGS = @LIBLTDL_CFLAGS@
@ -298,6 +290,7 @@ builddir = @builddir@
cgiexecdir = @cgiexecdir@
datadir = @datadir@
datarootdir = @datarootdir@
devddir = @devddir@
docdir = @docdir@
driverexecdir = @driverexecdir@
dvidir = @dvidir@
@ -744,6 +737,7 @@ HTML_DEV_MANS = \
@SOME_DRIVERS_FALSE@ bcmxcp_usb.txt \
@SOME_DRIVERS_FALSE@ blazer-common.txt \
@SOME_DRIVERS_FALSE@ blazer_usb.txt \
@SOME_DRIVERS_FALSE@ nutdrv_atcl_usb.txt \
@SOME_DRIVERS_FALSE@ nutdrv_qx.txt \
@SOME_DRIVERS_FALSE@ richcomm_usb.txt \
@SOME_DRIVERS_FALSE@ riello_usb.txt \
@ -753,6 +747,7 @@ HTML_DEV_MANS = \
@SOME_DRIVERS_FALSE@MAN_USB_LIBUSB_PAGES = \
@SOME_DRIVERS_FALSE@ bcmxcp_usb.8 \
@SOME_DRIVERS_FALSE@ blazer_usb.8 \
@SOME_DRIVERS_FALSE@ nutdrv_atcl_usb.8 \
@SOME_DRIVERS_FALSE@ nutdrv_qx.8 \
@SOME_DRIVERS_FALSE@ richcomm_usb.8 \
@SOME_DRIVERS_FALSE@ riello_usb.8 \
@ -763,6 +758,7 @@ HTML_DEV_MANS = \
@SOME_DRIVERS_FALSE@ bcmxcp_usb.html \
@SOME_DRIVERS_FALSE@ blazer_usb.html \
@SOME_DRIVERS_FALSE@ nutdrv_qx.html \
@SOME_DRIVERS_FALSE@ nutdrv_atcl_usb.html \
@SOME_DRIVERS_FALSE@ richcomm_usb.html \
@SOME_DRIVERS_FALSE@ riello_usb.html \
@SOME_DRIVERS_FALSE@ tripplite_usb.html \
@ -1227,10 +1223,7 @@ uninstall-man: uninstall-man1 uninstall-man3 uninstall-man5 \
all:
man-index.html: index.html
cp -f $< $@
html-man: $(HTML_MANS) man-index.html
html-man: $(HTML_MANS) index.html
@HAVE_ASCIIDOC_TRUE@.txt.html:
@HAVE_ASCIIDOC_TRUE@ $(ASCIIDOC) --backend=xhtml11 \

View File

@ -2,12 +2,12 @@
.\" Title: al175
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 11/20/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "AL175" "8" "11/20/2013" "Network UPS Tools 2\&.7\&.1" "NUT Manual"
.TH "AL175" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: apcsmart-old
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "APCSMART\-OLD" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "APCSMART\-OLD" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: apcsmart
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 10/30/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "APCSMART" "8" "10/30/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "APCSMART" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: apcupsd-ups
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 11/18/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre2
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "APCUPSD\-UPS" "8" "11/18/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "APCUPSD\-UPS" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -22,4 +22,8 @@ endif::backend-docbook[]
ifdef::backend-xhtml11[]
[linkman-inlinemacro]
<a href="{target}.html">{target}{0?({0})}</a>
# Format-detection to prevent smartphones from being too smart
[+docinfo]
<meta name="format-detection" content="telephone=no" />
endif::backend-xhtml11[]

View File

@ -2,12 +2,12 @@
.\" Title: bcmxcp
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "BCMXCP" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "BCMXCP" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: bcmxcp_usb
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "BCMXCP_USB" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "BCMXCP_USB" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: belkin
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "BELKIN" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "BELKIN" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: belkinunv
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "BELKINUNV" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "BELKINUNV" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: bestfcom
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "BESTFCOM" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "BESTFCOM" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: bestfortress
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "BESTFORTRESS" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "BESTFORTRESS" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: bestuferrups
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "BESTUFERRUPS" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "BESTUFERRUPS" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: bestups
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "BESTUPS" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "BESTUPS" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: blazer_ser
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 11/17/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "BLAZER_SER" "8" "11/17/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "BLAZER_SER" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: blazer_usb
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 11/18/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre2
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "BLAZER_USB" "8" "11/18/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "BLAZER_USB" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: clone
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "CLONE" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "CLONE" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: dummy-ups
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "DUMMY\-UPS" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "DUMMY\-UPS" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: etapro
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "ETAPRO" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "ETAPRO" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: everups
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "EVERUPS" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "EVERUPS" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: gamatronic
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "GAMATRONIC" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "GAMATRONIC" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: genericups
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "GENERICUPS" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "GENERICUPS" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: hosts.conf
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "HOSTS\&.CONF" "5" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "HOSTS\&.CONF" "5" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: isbmex
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "ISBMEX" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "ISBMEX" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: ivtscd
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "IVTSCD" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "IVTSCD" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: libnutclient
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 11/18/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre2
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "LIBNUTCLIENT" "3" "11/18/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "LIBNUTCLIENT" "3" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: libnutclient_commands
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "LIBNUTCLIENT_COMMAND" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "LIBNUTCLIENT_COMMAND" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: libnutclient_devices
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "LIBNUTCLIENT_DEVICES" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "LIBNUTCLIENT_DEVICES" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: libnutclient_general
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 11/18/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre2
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "LIBNUTCLIENT_GENERAL" "3" "11/18/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "LIBNUTCLIENT_GENERAL" "3" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: libnutclient_misc
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "LIBNUTCLIENT_MISC" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "LIBNUTCLIENT_MISC" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: libnutclient_tcp
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "LIBNUTCLIENT_TCP" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "LIBNUTCLIENT_TCP" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: libnutclient_variables
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "LIBNUTCLIENT_VARIABL" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "LIBNUTCLIENT_VARIABL" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: libupsclient-config
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "LIBUPSCLIENT\-CONFIG" "1" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "LIBUPSCLIENT\-CONFIG" "1" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: liebert-esp2
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "LIEBERT\-ESP2" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "LIEBERT\-ESP2" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: liebert
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "LIEBERT" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "LIEBERT" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: macosx-ups
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "MACOSX\-UPS" "8" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "MACOSX\-UPS" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: masterguard
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "MASTERGUARD" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "MASTERGUARD" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: metasys
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "METASYS" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "METASYS" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: mge-shut
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "MGE\-SHUT" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "MGE\-SHUT" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: mge-utalk
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "MGE\-UTALK" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "MGE\-UTALK" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: microdowell
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "MICRODOWELL" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "MICRODOWELL" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: netxml-ups
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 10/30/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NETXML\-UPS" "8" "10/30/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NETXML\-UPS" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nut-ipmipsu
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUT\-IPMIPSU" "8" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUT\-IPMIPSU" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nut-recorder
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 11/18/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre2
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUT\-RECORDER" "8" "11/18/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUT\-RECORDER" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nut-scanner
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUT\-SCANNER" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "NUT\-SCANNER" "8" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nut.conf
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 07/26/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.6.5
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUT\&.CONF" "5" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.TH "NUT\&.CONF" "5" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -0,0 +1,72 @@
'\" t
.\" Title: nutdrv_atcl_usb
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTDRV_ATCL_USB" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
nutdrv_atcl_usb \- Driver for \*(AqATCL FOR UPS\*(Aq equipment
.SH "NOTE"
.sp
This man page only documents the specific features of the nutdrv_atcl_usb driver\&. For information about the core driver, see \fBnutupsdrv\fR(8)\&.
.SH "SUPPORTED HARDWARE"
.sp
This driver is for UPS hardware which identifies itself as USB idVendor 0001 and idProduct 0000, and iManufacturer ATCL FOR UPS\&. Known manufacturers include Kanji and Plexus\&. The UPS interface seems to be a USB frontend to a traditional contact\-closure interface, which translates into only three states in ups\&.status: \fBOL\fR, \fBOB\fR and \fBOB LB\fR\&. See also \fBgenericups\fR(8)\&.
.SH "EXTRA ARGUMENTS"
.sp
This driver supports the following optional setting:
.PP
\fBvendor\fR=\fIname\fR
.RS 4
In case your iManufacturer (Vendor) string does not exactly match
ATCL FOR UPS, you may provide an alternate string here\&. Note that a more likely case is that your device is handled by another driver for
0001:0000
devices, such as
\fBnutdrv_qx\fR(8)\&.
.RE
.SH "BUGS"
.sp
The UPS returns the same code for "load power is off" as for "on line power"\&. This condition will not be observed if the NUT master is powered by the UPS, but may be an issue if the UPS is monitored by a remote system\&.
.sp
The time between the shutdown command and removal of power seems to be fixed at 30 seconds\&. Ensure that the NUT shutdown script is invoked as late as possible in the shutdown procedure (in case some services take longer than others to clean up)\&.
.sp
Most contact\-closure UPSes will not power down the load if the line power is present\&. This can create a race when using slave \fBupsmon\fR(8) systems\&. See the \fBupsmon\fR(8) man page for more information\&. The solution to this problem is to upgrade to a smart protocol UPS of some kind that allows detection and proper load cycling on command\&.
.SH "AUTHORS"
.sp
Charles Lepple
.SH "SEE ALSO"
.SS "The core driver:"
.sp
\fBnutupsdrv\fR(8)
.SS "The generic serial driver:"
.sp
\fBgenericups\fR(8)
.SS "The Qx driver:"
.sp
\fBnutdrv_qx\fR(8)
.SS "Internet resources:"
.sp
The NUT (Network UPS Tools) home page: http://www\&.networkupstools\&.org/

View File

@ -0,0 +1,70 @@
NUTDRV_ATCL_USB(8)
==================
NAME
----
nutdrv_atcl_usb - Driver for 'ATCL FOR UPS' equipment
NOTE
----
This man page only documents the specific features of the nutdrv_atcl_usb
driver. For information about the core driver, see linkman:nutupsdrv[8].
SUPPORTED HARDWARE
------------------
This driver is for UPS hardware which identifies itself as USB idVendor 0001
and idProduct 0000, and iManufacturer +ATCL FOR UPS+. Known manufacturers
include Kanji and Plexus. The UPS interface seems to be a USB frontend to a
traditional contact-closure interface, which translates into only three states
in ups.status: *OL*, *OB* and *OB LB*. See also linkman:genericups[8].
EXTRA ARGUMENTS
---------------
This driver supports the following optional setting:
*vendor*='name'::
In case your iManufacturer (Vendor) string does not exactly match
+ATCL FOR UPS+, you may provide an alternate string here. Note that a more
likely case is that your device is handled by another driver for +0001:0000+
devices, such as linkman:nutdrv_qx[8].
BUGS
----
The UPS returns the same code for "load power is off" as for "on line power".
This condition will not be observed if the NUT master is powered by the UPS,
but may be an issue if the UPS is monitored by a remote system.
The time between the shutdown command and removal of power seems to be fixed at
30 seconds. Ensure that the NUT shutdown script is invoked as late as possible
in the shutdown procedure (in case some services take longer than others to
clean up).
Most contact-closure UPSes will not power down the load if the line power
is present. This can create a race when using slave linkman:upsmon[8] systems.
See the linkman:upsmon[8] man page for more information. The solution to this
problem is to upgrade to a smart protocol UPS of some kind that allows
detection and proper load cycling on command.
AUTHORS
-------
Charles Lepple
SEE ALSO
--------
The core driver:
~~~~~~~~~~~~~~~~
linkman:nutupsdrv[8]
The generic serial driver:
~~~~~~~~~~~~~~~~~~~~~~~~~~
linkman:genericups[8]
The Qx driver:
~~~~~~~~~~~~~~
linkman:nutdrv_qx[8]
Internet resources:
~~~~~~~~~~~~~~~~~~~
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

View File

@ -2,12 +2,12 @@
.\" Title: nutdrv_qx
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 11/18/2013
.\" Date: 02/25/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre2
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTDRV_QX" "8" "11/18/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTDRV_QX" "8" "02/25/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
@ -34,7 +34,7 @@ nutdrv_qx \- Driver for Q* protocol serial and USB based UPS equipment
This man page only documents the hardware\-specific features of the \fBnutdrv_qx\fR driver\&. For information about the core driver, see \fBnutupsdrv\fR(8)\&.
.SH "SUPPORTED HARDWARE"
.sp
The \fBnutdrv_qx\fR driver is known to work with various UPSes from \fIBlazer\fR, \fIEnergy Sistem\fR, \fIFenton Technologies\fR, \fIGeneral Electric\fR, \fIMustek\fR, \fIVoltronic Power\fR (rebranded by many, many \- have I said many? \- others\&.\&. Long story short: if your UPS came with a software called \fIViewpower\fR, chances are high that it works with this driver with the \fIvoltronic\fR protocol) and many others\&.
The \fBnutdrv_qx\fR driver is known to work with various UPSes from \fIBlazer\fR, \fIEnergy Sistem\fR, \fIFenton Technologies\fR, \fIGeneral Electric\fR, \fIMustek\fR, \fIVoltronic Power\fR (rebranded by many, many \- have I said many? \- others\&.\&. Long story short: if your UPS came with a software called \fIViewpower\fR, chances are high that it works with this driver with one of the \fIvoltronic*\fR protocols or with the \fImecer\fR one) and many others\&.
.sp
The NUT compatibility table lists all the known supported models\&. Keep in mind, however, that other models not listed there may also be supported, but haven\(cqt been tested\&.
.sp
@ -47,9 +47,11 @@ The following are the ones that most likely will need changing (see \fBups.conf\
.PP
\fBondelay =\fR \fIvalue\fR
.RS 4
Time to wait before switching on the UPS (seconds)\&. This value is truncated to units of 60 seconds\&. The acceptable range is
0\&.\&.599940
seconds\&. Note that a value below 3 minutes, may cause earlier firmware versions to not switch on automatically, so it defaults to 3 minutes (i\&.e\&. 180 seconds)\&. This option provides a default value for
Time to wait before switching on the UPS (seconds)\&. This value is truncated to units of 60 seconds\&.
.sp
Note that a value below 3 minutes, may cause earlier firmware versions to not switch on automatically, so it defaults to 3 minutes (i\&.e\&. 180 seconds)\&.
.sp
This option provides a default value for
\fBups\&.delay\&.start\fR
that will then be used by the driver in the automatic shutdown sequence (i\&.e\&. calling the driver with the
\fB\-k\fR
@ -69,7 +71,9 @@ with
.PP
\fBoffdelay =\fR \fIvalue\fR
.RS 4
Time to wait before shutting down the UPS (seconds)\&. This value is truncated to units of 6 seconds (less than 60 seconds) or 60 seconds (more than 60 seconds)\&. Defaults to 30 seconds\&. This option provides a default value for
Time to wait before shutting down the UPS (seconds)\&. This value is truncated to units of 6 seconds (less than 60 seconds) or 60 seconds (more than 60 seconds)\&. Defaults to 30 seconds\&.
.sp
This option provides a default value for
\fBups\&.delay\&.shutdown\fR
that will then be used by the driver in the automatic shutdown sequence (i\&.e\&. calling the driver with the
\fB\-k\fR
@ -95,7 +99,8 @@ when FSD arises the UPS will call a
\fBshutdown\&.stayoff\fR
shutting down after
\fBups\&.delay\&.shutdown\fR
seconds and won\(cqt return, otherwise (standard behaviour) the UPS will call
seconds and won\(cqt return (see
KNOWN PROBLEMS), otherwise (standard behaviour) the UPS will call
\fBshutdown\&.return\fR
shutting down after
\fBups\&.delay\&.shutdown\fR
@ -106,14 +111,27 @@ seconds (if mains meanwhile returned)\&.
.PP
\fBprotocol =\fR \fIstring\fR
.RS 4
Skip autodetection of the protocol to use and only use the one specified\&. Supported values
Skip autodetection of the protocol to use and only use the one specified\&. Supported values:
\fImecer\fR,
\fImegatec\fR,
\fImegatec/old\fR,
\fImustek\fR,
\fIvoltronic\fR
\fIq1\fR,
\fIvoltronic\fR,
\fIvoltronic\-qs\fR
and
\fIzinto\fR\&.
.sp
Note that if you end up using the
\fIq1\fR
protocol, you may want to give a try to the
\fImecer\fR,
\fImegatec\fR
and
\fIzinto\fR
ones setting the
\fBnovendor\fR/\fBnorating\fR flags
(only one, or both)\&.
.RE
.PP
\fBpollfreq =\fR \fIvalue\fR
@ -185,6 +203,13 @@ is also specified\&.
.RE
.SS "MECER, MEGATAEC, MEGATEC/OLD, MUSTEK, ZINTO PROTOCOLS"
.PP
\fBondelay\fR
.RS 4
The acceptable range is
0\&.\&.599940
seconds\&.
.RE
.PP
\fBoffdelay\fR
.RS 4
The acceptable range is
@ -201,10 +226,47 @@ Some UPSes will lock up if you attempt to read rating information from them\&. S
.RS 4
Some UPSes will lock up if you attempt to read vendor information from them\&. Setting this flag will make the driver skip this step\&.
.RE
.SS "Q1 PROTOCOL"
.PP
\fBondelay\fR
.RS 4
The acceptable range is
0\&.\&.599940
seconds\&.
.RE
.PP
\fBoffdelay\fR
.RS 4
The acceptable range is
12\&.\&.600
seconds\&.
.RE
.SS "VOLTRONIC\-QS PROTOCOL"
.PP
\fBondelay\fR
.RS 4
The acceptable range is
60\&.\&.599940
seconds\&.
.RE
.PP
\fBoffdelay\fR
.RS 4
The acceptable range is
12\&.\&.540
seconds\&.
.RE
.SS "VOLTRONIC PROTOCOL"
.sp
The following options are supported only by the \fIvoltronic\fR protocol\&. Not all of them are available on all the UPSes supported by this protocol\&.
.PP
\fBondelay\fR
.RS 4
The acceptable range is
0\&.\&.599940
seconds\&.
.RE
.PP
\fBoffdelay\fR
.RS 4
The acceptable range is
@ -535,7 +597,7 @@ Perform a quick (10 second) battery test\&.
.RS 4
Stop a running battery test\&. (Not available on some hardware)
.RE
.SS "MECER, MEGATEC, MEGATEC/OLD, MUSTEK, ZINTO PROTOCOLS"
.SS "MECER, MEGATEC, MEGATEC/OLD, MUSTEK, Q1, ZINTO PROTOCOLS"
.PP
\fBtest\&.battery\&.start\fR \fIvalue\fR
.RS 4
@ -543,6 +605,22 @@ Perform a battery test for the duration of
\fIvalue\fR
seconds (truncated to 60 seconds) [60\&.\&.5940]\&.
.RE
.sp
.it 1 an-trap
.nr an-no-space-flag 1
.nr an-break-flag 1
.br
.ps +1
\fBVOLTRONIC POWER P98 UNITS (WITH MECER PROTOCOL)\fR
.RS 4
.PP
\fBtest\&.battery\&.start\fR \fIvalue\fR
.RS 4
Perform a battery test for the duration of
\fIvalue\fR
seconds (truncated to 60 seconds) [12\&.\&.5940]\&. This value is truncated to units of 6 seconds (less than 60 seconds) or 60 seconds (more than 60 seconds)\&.
.RE
.RE
.SS "VOLTRONIC PROTOCOL"
.sp
The following instant commands are available for the \fIvoltronic\fR protocol\&. Not all of them are available on all the UPSes supported by this protocol\&.
@ -878,6 +956,56 @@ Both the \fBload\&.off\fR and \fBshutdown\&.stayoff\fR instant commands are mean
Some models report a bogus value for the beeper status (will always be \fIenabled\fR or \fIdisabled\fR)\&. So, the \fBbeeper\&.toggle\fR command may appear to have no effect in the status reported by the driver when, in fact, it is working fine\&.
.sp
The temperature and load value is known to be bogus in some models\&.
.SS "VOLTRONIC\-QS UNITS"
.sp
Both \fBload\&.off\fR and \fBshutdown\&.stayoff\fR instant commands are known to work as expected (i\&.e\&. turn the load off indefinitely) only if mains is present, otherwise, as soon as mains returns the load will be powered\&.
.sp
After issuing a \fBshutdown\&.return\fR instant command, the UPS won\(cqt wait \fBondelay\fR before powering on the load, provided the following conditions are met:
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
if the load has been previously (no matter how long before) powered off through
\fBload\&.off\fR/\fBshutdown\&.stayoff\fR
\fIand\fR
powered on through
\fBload\&.on\fR/\fBshutdown\&.stop\fR
\fIand\fR
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
if AC wasn\(cqt cut after issuing the
\fBload\&.off\fR/\fBshutdown\&.stayoff\fR
(i\&.e\&. the UPS didn\(cqt turn itself off)
\fIand\fR
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
if there\(cqs a power outage after issuing the
\fBshutdown\&.return\fR
command
.RE
.sp
In this case, as soon as mains returns the load will be powered\&.
.SH "UPS WARNINGS (VOLTRONIC PROTOCOL)"
.sp
The UPSes supported by \fIvoltronic\fR protocol report warnings through a 64bit flag (bit1bit2\&...bit63bit64) where 1 means that a warning arose, while 0 means no warning\&. Since more than one warning at a time can be signaled, and because of the limited space in the ups\&.alarm variable, if the length of the warnings exceeds that of ups\&.alarms variable, they will be reported as bits\&. If you want to know the explanation of that bit you can either watch the log or see the next table (unlisted bits equal to unknown warnings)\&.

View File

@ -17,7 +17,7 @@ For information about the core driver, see linkman:nutupsdrv[8].
SUPPORTED HARDWARE
------------------
The *nutdrv_qx* driver is known to work with various UPSes from 'Blazer', 'Energy Sistem', 'Fenton Technologies', 'General Electric', 'Mustek', 'Voltronic Power' (rebranded by many, many - have I said many? - others.. Long story short: if your UPS came with a software called 'Viewpower', chances are high that it works with this driver with the 'voltronic' <<_extra_arguments,protocol>>) and many others.
The *nutdrv_qx* driver is known to work with various UPSes from 'Blazer', 'Energy Sistem', 'Fenton Technologies', 'General Electric', 'Mustek', 'Voltronic Power' (rebranded by many, many - have I said many? - others.. Long story short: if your UPS came with a software called 'Viewpower', chances are high that it works with this driver with one of the <<_extra_arguments,'voltronic*' protocols or with the 'mecer' one>>) and many others.
The <<_internet_resources,NUT compatibility table>> lists all the known supported models.
Keep in mind, however, that other models not listed there may also be supported, but haven't been tested.
@ -35,22 +35,26 @@ The following are the ones that most likely will need changing (see linkman:ups.
*ondelay =* 'value'::
Time to wait before switching on the UPS (seconds).
This value is truncated to units of 60 seconds.
The acceptable range is +0..599940+ seconds.
+
Note that a value below 3 minutes, may cause earlier firmware versions to not switch on automatically, so it defaults to 3 minutes (i.e. 180 seconds).
+
This option provides a default value for *ups.delay.start* that will then be used by the driver in the automatic shutdown sequence (i.e. calling the driver with the *-k* option, calling linkman:upsdrvctl[8] with the *shutdown* option or when the +FSD+ flag is set and linkman:upsmon[8] enters its shutdown sequence): however you can change this value `on the fly' for the actual session, only for the use with instant commands, setting *ups.delay.start* with linkman:upsrw[8].
*offdelay =* 'value'::
Time to wait before shutting down the UPS (seconds).
This value is truncated to units of 6 seconds (less than 60 seconds) or 60 seconds (more than 60 seconds).
Defaults to 30 seconds.
+
This option provides a default value for *ups.delay.shutdown* that will then be used by the driver in the automatic shutdown sequence (i.e. calling the driver with the *-k* option, calling linkman:upsdrvctl[8] with the *shutdown* option or when the +FSD+ flag is set and linkman:upsmon[8] enters its shutdown sequence): however you can change this value `on the fly' for the actual session, only for the use with instant commands, setting *ups.delay.shutdown* with linkman:upsrw[8].
*stayoff*::
If you set stayoff in linkman:ups.conf[5] when FSD arises the UPS will call a *shutdown.stayoff* shutting down after *ups.delay.shutdown* seconds and won't return, otherwise (standard behaviour) the UPS will call *shutdown.return* shutting down after *ups.delay.shutdown* seconds and then turn on after *ups.delay.start* seconds (if mains meanwhile returned).
If you set stayoff in linkman:ups.conf[5] when FSD arises the UPS will call a *shutdown.stayoff* shutting down after *ups.delay.shutdown* seconds and won't return (see <<_known_problems,KNOWN PROBLEMS>>), otherwise (standard behaviour) the UPS will call *shutdown.return* shutting down after *ups.delay.shutdown* seconds and then turn on after *ups.delay.start* seconds (if mains meanwhile returned).
*protocol =* 'string'::
Skip autodetection of the protocol to use and only use the one specified.
Supported values 'mecer', 'megatec', 'megatec/old', 'mustek', 'voltronic' and 'zinto'.
Supported values: 'mecer', 'megatec', 'megatec/old', 'mustek', 'q1', 'voltronic', 'voltronic-qs' and 'zinto'.
+
Note that if you end up using the 'q1' protocol, you may want to give a try to the 'mecer', 'megatec' and 'zinto' ones setting the <<old-blazer-protocols-options,*novendor*/*norating* flags>> (only one, or both).
*pollfreq =* 'value'::
Set polling frequency, in seconds, to reduce the data flow.
@ -99,9 +103,13 @@ If not specified, the driver defaults to 10%.
Only used if *runtimecal* is also specified.
[[old-blazer-protocols-options]]
MECER, MEGATAEC, MEGATEC/OLD, MUSTEK, ZINTO PROTOCOLS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*ondelay*::
The acceptable range is +0..599940+ seconds.
*offdelay*::
The acceptable range is +12..600+ seconds.
@ -114,12 +122,35 @@ Some UPSes will lock up if you attempt to read vendor information from them.
Setting this flag will make the driver skip this step.
Q1 PROTOCOL
~~~~~~~~~~~
*ondelay*::
The acceptable range is +0..599940+ seconds.
*offdelay*::
The acceptable range is +12..600+ seconds.
VOLTRONIC-QS PROTOCOL
~~~~~~~~~~~~~~~~~~~~~
*ondelay*::
The acceptable range is +60..599940+ seconds.
*offdelay*::
The acceptable range is +12..540+ seconds.
VOLTRONIC PROTOCOL
~~~~~~~~~~~~~~~~~~
The following options are supported only by the 'voltronic' protocol.
Not all of them are available on all the UPSes supported by this protocol.
*ondelay*::
The acceptable range is +0..599940+ seconds.
*offdelay*::
The acceptable range is +12..5940+ seconds.
@ -317,13 +348,21 @@ Stop a running battery test.
(Not available on some hardware)
MECER, MEGATEC, MEGATEC/OLD, MUSTEK, ZINTO PROTOCOLS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MECER, MEGATEC, MEGATEC/OLD, MUSTEK, Q1, ZINTO PROTOCOLS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*test.battery.start* 'value'::
Perform a battery test for the duration of 'value' seconds (truncated to 60 seconds) [+60..5940+].
VOLTRONIC POWER P98 UNITS (WITH MECER PROTOCOL)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
*test.battery.start* 'value'::
Perform a battery test for the duration of 'value' seconds (truncated to 60 seconds) [+12..5940+].
This value is truncated to units of 6 seconds (less than 60 seconds) or 60 seconds (more than 60 seconds).
VOLTRONIC PROTOCOL
~~~~~~~~~~~~~~~~~~
@ -540,6 +579,20 @@ So, the *beeper.toggle* command may appear to have no effect in the status repor
The temperature and load value is known to be bogus in some models.
VOLTRONIC-QS UNITS
~~~~~~~~~~~~~~~~~~
Both *load.off* and *shutdown.stayoff* instant commands are known to work as expected (i.e. turn the load off indefinitely) only if mains is present, otherwise, as soon as mains returns the load will be powered.
After issuing a *shutdown.return* instant command, the UPS won't wait *ondelay* before powering on the load, provided the following conditions are met:
- if the load has been previously (no matter how long before) powered off through *load.off*/*shutdown.stayoff* _and_ powered on through *load.on*/*shutdown.stop* _and_
- if AC wasn't cut after issuing the *load.off*/*shutdown.stayoff* (i.e. the UPS didn't turn itself off) _and_
- if there's a power outage after issuing the *shutdown.return* command
In this case, as soon as mains returns the load will be powered.
UPS WARNINGS (VOLTRONIC PROTOCOL)
---------------------------------
@ -548,7 +601,7 @@ Since more than one warning at a time can be signaled, and because of the limite
If you want to know the explanation of that bit you can either watch the log or see the next table (unlisted bits equal to unknown warnings).
.UPS Warnings for 'voltronic' UPSes
[cols="5>,95",options="autowidth,header",frame="topbot",align="center",caption=""]
[cols="5>,95",options="autowidth,header",frame="topbot",grid="rows",align="center",caption=""]
|====
|# |Corresponding Warning
|1 |Battery disconnected
@ -637,6 +690,7 @@ linkman:upsdrvctl[8],
linkman:upsmon[8],
linkman:upsrw[8]
Internet Resources:
~~~~~~~~~~~~~~~~~~~

View File

@ -2,12 +2,12 @@
.\" Title: nutscan
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_add_device_to_device
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_ADD_DEVICE_T" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_ADD_DEVICE_T" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_add_option_to_device
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_ADD_OPTION_T" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_ADD_OPTION_T" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_cidr_to_ip
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_CIDR_TO_IP" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_CIDR_TO_IP" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_display_parsable
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_DISPLAY_PARS" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_DISPLAY_PARS" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_display_ups_conf
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_DISPLAY_UPS_" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_DISPLAY_UPS_" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_free_device
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_FREE_DEVICE" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_FREE_DEVICE" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_get_serial_ports_list
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_GET_SERIAL_P" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_GET_SERIAL_P" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_init
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_INIT" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_INIT" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_new_device
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_NEW_DEVICE" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_NEW_DEVICE" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_scan_avahi
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_SCAN_AVAHI" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_SCAN_AVAHI" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_scan_eaton_serial
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_SCAN_EATON_S" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_SCAN_EATON_S" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_scan_ipmi
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_SCAN_IPMI" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_SCAN_IPMI" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_scan_nut
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_SCAN_NUT" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_SCAN_NUT" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_scan_snmp
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_SCAN_SNMP" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_SCAN_SNMP" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_scan_usb
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_SCAN_USB" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_SCAN_USB" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

View File

@ -2,12 +2,12 @@
.\" Title: nutscan_scan_xml_http
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\" Date: 09/13/2013
.\" Date: 02/15/2014
.\" Manual: NUT Manual
.\" Source: Network UPS Tools 2.7.1-pre1
.\" Source: Network UPS Tools 2.7.1.5
.\" Language: English
.\"
.TH "NUTSCAN_SCAN_XML_HTT" "3" "09/13/2013" "Network UPS Tools 2\&.7\&.1\-p" "NUT Manual"
.TH "NUTSCAN_SCAN_XML_HTT" "3" "02/15/2014" "Network UPS Tools 2\&.7\&.1\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------

Some files were not shown because too many files have changed in this diff Show More