48 lines
1.5 KiB
Groff
48 lines
1.5 KiB
Groff
.TH TRIPPLITE 8 "Sat Aug 21 2004" "" "Network UPS Tools (NUT)"
|
|
.SH NAME
|
|
tripplite \- Driver for Tripp\(hyLite SmartPro UPS equipment
|
|
.SH NOTE
|
|
This man page only documents the hardware\(hyspecific features of the
|
|
tripplite driver. For information about the core driver, see
|
|
\fBnutupsdrv\fR(8).
|
|
|
|
.SH SUPPORTED HARDWARE
|
|
This driver should work on the SmartPro line, including the SMART700
|
|
and SMART700SER. It only supports SmartPro models that communicate
|
|
using the serial port.
|
|
|
|
.SH EXTRA ARGUMENTS
|
|
This driver supports the following optional settings in the
|
|
\fBups.conf\fR(5):
|
|
|
|
.IP "offdelay=\fInum\fR"
|
|
Time to wait before the UPS is turned off after the kill power command is
|
|
sent.
|
|
The default value is 64 (in seconds).
|
|
|
|
.IP "rebootdelay=\fInum\fR"
|
|
Set the timer before the UPS is cycled after the reboot command is sent.
|
|
The default value is 64 (in seconds).
|
|
|
|
.IP "startdelay=\fInum\fR"
|
|
Set the time that the UPS waits before it turns itself back on after a
|
|
reboot command.
|
|
The default value is 60 (in seconds).
|
|
|
|
.SH KNOWN ISSUES AND BUGS
|
|
Battery charge information may not be correct for all UPSes. It is tuned
|
|
to be correct for a SMART700SER. Other models may not provide correct
|
|
information. Information from the manufacturer would be helpful.
|
|
|
|
.SH AUTHORS
|
|
Rickard E. (Rik) Faith <faith@alephnull.com>
|
|
Nicholas Kain <nicholas@kain.us>
|
|
|
|
.SH SEE ALSO
|
|
|
|
.SS The core driver:
|
|
\fBnutupsdrv\fR(8)
|
|
|
|
.SS Internet resources:
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|