203 lines
5.8 KiB
Plaintext
203 lines
5.8 KiB
Plaintext
NUTUPSDRV(8)
|
|
============
|
|
|
|
NAME
|
|
----
|
|
|
|
nutupsdrv - generic manual for unified NUT drivers
|
|
|
|
SYNOPSIS
|
|
--------
|
|
|
|
*nutupsdrv* '-h'
|
|
|
|
*nutupsdrv* [OPTIONS]
|
|
|
|
DESCRIPTION
|
|
-----------
|
|
|
|
*nutupsdrv* is not actually a driver. This is a combined man page for the
|
|
shared code that is the core of many drivers within the Network UPS Tools
|
|
package.
|
|
|
|
For information on the specific drivers, see their individual man pages.
|
|
|
|
UPS drivers provide a communication channel between the physical UPS
|
|
hardware and the linkman:upsd[8] server. The driver is responsible for
|
|
translating the native protocol of the UPS to the common format used by
|
|
the rest of this package.
|
|
|
|
The core has two modes of operation which are determined by the
|
|
command line switches. In the normal mode, the driver will periodically
|
|
poll the UPS for its state and parameters. The results of this command
|
|
is presented to upsd. The driver will also handle setting variables and
|
|
instant commands if available.
|
|
|
|
The driver can also instruct the UPS to shut down the load, possibly
|
|
after some delay. This mode of operation is intended for cases when it is
|
|
known that the UPS is running out of battery power and the systems
|
|
attached must be turned off to ensure a proper reboot when power returns.
|
|
|
|
NOTE: You probably don't want to use any of these options directly. You
|
|
should use linkman:upsdrvctl[8] to control your drivers, and
|
|
linkman:ups.conf[5] to configure them. The rest of this manual describes
|
|
options and parameters that generally are not needed by normal users.
|
|
|
|
OPTIONS
|
|
-------
|
|
*-h*::
|
|
Display a help message without doing anything else. This will also list
|
|
possible values for '-x' in that driver, and other help text that the
|
|
driver's author may have provided.
|
|
|
|
*-a* 'id'::
|
|
Autoconfigure this driver using the 'id' section of linkman:ups.conf[5].
|
|
*This argument is mandatory when calling the driver directly.*
|
|
|
|
*-D*::
|
|
Raise the debugging level. Use this multiple times to see more details.
|
|
Running a driver in debug mode will prevent it from backgrounding after
|
|
startup. It will keep on logging information to the console until it
|
|
receives a SIGINT (usually Ctrl-C) or SIGTERM signal.
|
|
+
|
|
The level of debugging needed depends both on the driver and the
|
|
problem you're trying to diagnose. Therefore, first explain the problem you
|
|
have with a driver to a developer/maintainer, before sending them debugging
|
|
output. More often than not, if you just pick a level, the output may be
|
|
either too limited or too verbose to be of any use.
|
|
|
|
*-q*::
|
|
Raise log level threshold. Use this multiple times to log more details.
|
|
+
|
|
The debugging comment above also applies here.
|
|
|
|
*-i* 'interval'::
|
|
Set the poll interval for the device.
|
|
|
|
*-V*::
|
|
Print only version information, then exit.
|
|
|
|
*-L*::
|
|
Print a parseable list of driver variables. Mostly useful for configuration
|
|
wizard programs.
|
|
|
|
*-k*::
|
|
("Kill" power) Forced shutdown mode. The UPS will power off the
|
|
attached load, if possible.
|
|
+
|
|
You should use +upsdrvctl shutdown+ whenever possible instead of
|
|
calling this directly.
|
|
|
|
*-r* 'directory'::
|
|
The driver will chroot(2) to 'directory' during initialization.
|
|
This can be useful when securing systems.
|
|
+
|
|
In addition to the state path, many systems will require /dev/null to
|
|
exist within 'directory' for this to work. The serial ports are
|
|
opened before the chroot call, so you do not need to create them inside
|
|
the jail. In fact, it is somewhat safer if you do not.
|
|
|
|
*-u* 'username'::
|
|
If started as root, the driver will setuid(2) to the user id
|
|
associated with 'username'.
|
|
+
|
|
If you do not specify this value and start it as root, the driver will
|
|
switch to the default value that was compiled into the code. This is
|
|
typically 'nobody', and is far from ideal.
|
|
|
|
*-x* 'var'='val'::
|
|
Define a variable called 'var' with the value of 'var' in the
|
|
driver. This varies from driver to driver - see the specific man pages
|
|
for more information.
|
|
+
|
|
This is like setting 'var'='val' in linkman:ups.conf[5], but
|
|
*-x* overrides any settings from that file.
|
|
|
|
DIAGNOSTICS
|
|
-----------
|
|
|
|
Information about the startup process is printed to stdout. Additional
|
|
messages after that point are available in the syslog. After linkman:upsd[8]
|
|
starts, the UPS clients such as linkman:upsc[8] can be used to query the status
|
|
of an UPS.
|
|
|
|
PROGRAM CONTROL
|
|
---------------
|
|
|
|
You should always use linkman:upsdrvctl[8] to control the drivers. While
|
|
drivers can be started by hand for testing purposes, it is not recommended for
|
|
production use.
|
|
|
|
FILES
|
|
-----
|
|
ups.conf::
|
|
Required configuration file. This contains all details on which drivers
|
|
to start and where the hardware is attached.
|
|
|
|
BUGS
|
|
----
|
|
|
|
Some of the drivers may have bugs. See their manuals for more
|
|
information.
|
|
|
|
SEE ALSO
|
|
--------
|
|
|
|
Server:
|
|
linkman:upsd[8]
|
|
|
|
Clients:
|
|
linkman:upsc[8], linkman:upscmd[8],
|
|
linkman:upsrw[8], linkman:upslog[8], linkman:upsmon[8]
|
|
|
|
CGI programs:
|
|
linkman:upsset.cgi[8], linkman:upsstats.cgi[8], linkman:upsimage.cgi[8]
|
|
|
|
Driver control:
|
|
linkman:upsdrvctl[8]
|
|
|
|
Drivers:
|
|
linkman:apcsmart[8],
|
|
linkman:bcmxcp[8],
|
|
linkman:bcmxcp_usb[8],
|
|
linkman:belkin[8],
|
|
linkman:belkinunv[8],
|
|
linkman:bestfcom[8],
|
|
linkman:bestuferrups[8],
|
|
linkman:bestups[8],
|
|
linkman:blazer[8],
|
|
linkman:cyberpower[8],
|
|
linkman:dummy-ups[8],
|
|
linkman:etapro[8],
|
|
linkman:everups[8],
|
|
linkman:gamatronic[8],
|
|
linkman:genericups[8],
|
|
linkman:isbmex[8],
|
|
linkman:liebert[8],
|
|
linkman:masterguard[8],
|
|
linkman:metasys[8],
|
|
linkman:mge-shut[8],
|
|
linkman:mge-utalk[8],
|
|
linkman:mge-xml[8],
|
|
linkman:newmge-shut[8],
|
|
linkman:nitram[8],
|
|
linkman:oneac[8],
|
|
linkman:optiups[8],
|
|
linkman:powercom[8],
|
|
linkman:powerman-pdu[8],
|
|
linkman:powerpanel[8],
|
|
linkman:rhino[8],
|
|
linkman:richcomm_usb[8],
|
|
linkman:safenet[8],
|
|
linkman:snmp-ups[8],
|
|
linkman:solis[8],
|
|
linkman:tripplite[8],
|
|
linkman:tripplitesu[8],
|
|
linkman:tripplite_usb[8],
|
|
linkman:usbhid-ups[8],
|
|
linkman:upscode2[8],
|
|
linkman:victronups[8]
|
|
|
|
Internet resources:
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|