65 lines
2.7 KiB
Plaintext
65 lines
2.7 KiB
Plaintext
# Network UPS Tools: example upsd configuration file
|
|
#
|
|
# This file contains access control data, you should keep it secure.
|
|
#
|
|
# It should only be readable by the user that upsd becomes. See the FAQ.
|
|
#
|
|
# Each entry below provides usage and default value.
|
|
|
|
# =======================================================================
|
|
# MAXAGE <seconds>
|
|
# MAXAGE 15
|
|
#
|
|
# This defaults to 15 seconds. After a UPS driver has stopped updating
|
|
# the data for this many seconds, upsd marks it stale and stops making
|
|
# that information available to clients. After all, the only thing worse
|
|
# than no data is bad data.
|
|
#
|
|
# You should only use this if your driver has difficulties keeping
|
|
# the data fresh within the normal 15 second interval. Watch the syslog
|
|
# for notifications from upsd about staleness.
|
|
|
|
# =======================================================================
|
|
# STATEPATH <path>
|
|
# STATEPATH /var/run/nut
|
|
#
|
|
# Tell upsd to look for the driver state sockets in 'path' rather
|
|
# than the default that was compiled into the program.
|
|
|
|
# =======================================================================
|
|
# LISTEN <address> [<port>]
|
|
# LISTEN 127.0.0.1 3493
|
|
# LISTEN ::1 3493
|
|
#
|
|
# This defaults to the localhost listening addresses and port 3493.
|
|
# In case of IP v4 or v6 disabled kernel, only the available one will be used.
|
|
#
|
|
# You may specify each interface you want upsd to listen on for connections,
|
|
# optionally with a port number.
|
|
#
|
|
# You may need this if you have multiple interfaces on your machine and
|
|
# you don't want upsd to listen to all interfaces (for instance on a
|
|
# firewall, you may not want to listen to the external interface).
|
|
#
|
|
# This will only be read at startup of upsd. If you make changes here,
|
|
# you'll need to restart upsd, reload will have no effect.
|
|
|
|
# =======================================================================
|
|
# MAXCONN <connections>
|
|
# MAXCONN 1024
|
|
#
|
|
# This defaults to maximum number allowed on your system. Each UPS, each
|
|
# LISTEN address and each client count as one connection. If the server
|
|
# runs out of connections, it will no longer accept new incoming client
|
|
# connections. Only set this if you know exactly what you're doing.
|
|
|
|
# =======================================================================
|
|
# CERTFILE <certificate file>
|
|
#
|
|
# When compiled with SSL support, you can enter the certificate file here.
|
|
# The certificates must be in PEM format and must be sorted starting with
|
|
# the subject's certificate (server certificate), followed by intermediate
|
|
# CA certificates (if applicable_ and the highest level (root) CA. It should
|
|
# end with the server key. See 'docs/security.txt' or the Security chapter of
|
|
# NUT user manual for more information on the SSL support in NUT.
|