antonlyap/nut-debian
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f308b5c62d
nut-debian/drivers/al175.c
Laurent Bigonville a356b56d11 Imported Upstream version 2.7.2
2014-04-22 20:39:47 +02:00

1294 lines
30 KiB
C
Raw Blame History

/*
* al175.c - NUT support for Eltek AL175 alarm module.
* AL175 shall be in COMLI mode.
*
* Copyright (C) 2004-2013 Marine & Bridge Navigation Systems <http://mns.spb.ru>
* Author: Kirill Smelkov <kirr@mns.spb.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* - NOTE the following document is referenced in this driver:
*
* TE-36862-B4 "COMLI COMMUNICATION PROTOCOL IMPLEMENTED IN PRS SYSTEMS",
* by Eltek A/S
*
*
* - AL175 debug levels:
*
* 1 user-level trace (status, instcmd, etc...)
* 2 status decode errors
* 3 COMLI proto handling errors
* 4 raw IO trace
*
*/
#include "main.h"
#include "serial.h"
#include "timehead.h"
#include <stddef.h>
#include <ctype.h>
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include "nut_stdint.h"
typedef uint8_t byte_t;
#define DRIVER_NAME "Eltek AL175/COMLI driver"
#define DRIVER_VERSION "0.12"
/* driver description structure */
upsdrv_info_t upsdrv_info = {
DRIVER_NAME,
DRIVER_VERSION,
"Kirill Smelkov <kirr@mns.spb.ru>\n" \
"Marine & Bridge Navigation Systems <http://mns.spb.ru>",
DRV_EXPERIMENTAL,
{ NULL }
};
#define STX 0x02
#define ETX 0x03
#define ACK 0x06
/************
* RAW DATA *
************/
/**
* raw_data buffer representation
*/
typedef struct {
byte_t *buf; /*!< the whole buffer address */
unsigned buf_size; /*!< the whole buffer size */
byte_t *begin; /*!< begin of content */
byte_t *end; /*!< one-past-end of content */
} raw_data_t;
/**
* pseudo-alloca raw_data buffer (alloca is not in POSIX)
* @param varp ptr-to local raw_data_t variable to which to alloca
* @param buf_array array allocated on stack which will be used as storage
* (must be auto-variable)
* @return alloca'ed memory as raw_data
*
* Example:
*
* raw_data_t ack;
* byte_t ack_buf[8];
*
* raw_alloc_onstack(&ack, ack_buf);
*/
#define raw_alloc_onstack(varp, buf_array) do { \
(varp)->buf = &(buf_array)[0]; \
(varp)->buf_size = sizeof(buf_array); \
\
(varp)->begin = (varp)->buf; \
(varp)->end = (varp)->buf; \
} while (0)
/**
* xmalloc raw buffer
* @param size size in bytes
* @return xmalloc'ed memory as raw_data
*/
raw_data_t raw_xmalloc(size_t size)
{
raw_data_t data;
data.buf = xmalloc(size);
data.buf_size = size;
data.begin = data.buf;
data.end = data.buf;
return data;
}
/**
* free raw_data buffer
* @param buf raw_data buffer to free
*/
void raw_free(raw_data_t *buf)
{
free(buf->buf);
buf->buf = NULL;
buf->buf_size = 0;
buf->begin = NULL;
buf->end = NULL;
}
/***************************************************************************/
/***************
* COMLI types *
***************/
/**
* COMLI message header info
* @see 1. INTRODUCTION
*/
typedef struct {
int id; /*!< Id[1:2] */
int stamp; /*!< Stamp[3] */
int type; /*!< Mess Type[4] */
} msg_head_t;
/**
* COMLI IO header info
* @see 1. INTRODUCTION
*/
typedef struct {
unsigned addr; /*!< Addr[5:8] */
unsigned len; /*!< NOB[9:10] */
} io_head_t;
/**
* maximum allowed io.len value
*/
#define IO_LEN_MAX 0xff
/**
* COMLI header info
* @see 1. INTRODUCTION
*/
typedef struct {
msg_head_t msg; /*!< message header [1:4] */
io_head_t io; /*!< io header [5:10] */
} comli_head_t;
/******************
* MISC UTILITIES *
******************/
/**
* convert hex string to int
* @param head input string
* @param count string length
* @return parsed value (>=0) if success, -1 on error
*/
static long from_hex(const byte_t *head, unsigned len)
{
long val=0;
while (len-- != 0) {
int ch = *head;
if (!isxdigit(ch))
return -1; /* wrong character */
val *= 0x10;
if (isdigit(ch)) {
val += (ch-'0');
}
else {
/* ch = toupper(ch) without locale-related problems */
if (ch < 'A')
ch += 'A' - 'a';
val += 0x0A + (ch-'A');
}
++head;
}
return val;
}
/**
* compute checksum of a buffer
* @see 10. CHECKSUM BCC
* @param buf buffer address
* @param count no. of bytes in the buffer
* @return computed checksum
*/
static byte_t compute_bcc(const byte_t *buf, size_t count)
{
byte_t bcc=0;
unsigned i;
for (i=0; i<count; ++i)
bcc ^= buf[i];
return bcc;
}
/**
* reverse bits in a buffer bytes from right to left
* @see 6. CODING AND DECODING OF REGISTER VALUES
* @param buf buffer address
* @param count no. of bytes in the buffer
*/
static void reverse_bits(byte_t *buf, size_t count)
{
byte_t x;
while (count!=0) {
x = *buf;
x = ( (x & 0x80) >> 7 ) |
( (x & 0x40) >> 5 ) |
( (x & 0x20) >> 3 ) |
( (x & 0x10) >> 1 ) |
( (x & 0x08) << 1 ) |
( (x & 0x04) << 3 ) |
( (x & 0x02) << 5 ) |
( (x & 0x01) << 7 );
*buf = x;
++buf;
--count;
}
}
/********************************************************************/
/*
* communication basics
*
* ME (Monitor Equipment)
* PRS (Power Rectifier System) /think of it as of UPS in common speak/
*
* there are 2 types of transactions:
*
* 'ACTIVATE COMMAND'
* ME -> PRS (al_prep_activate)
* ME <- PRS [ack] (al_check_ack)
*
*
* 'READ REGISTER'
* ME -> PRS (al_prep_read_req)
* ME <- PRS [data] (al_parse_reply)
*
*/
/********************
* COMLI primitives *
********************/
/************************
* COMLI: OUTPUT FRAMES *
************************/
/**
* prepare COMLI sentence
* @see 1. INTRODUCTION
* @param dest [out] where to put the result
* @param h COMLI header info
* @param buf data part of the sentence
* @param count amount of data bytes in the sentence
*
* @note: the data are copied into the sentence "as-is", there is no conversion is done.
* if the caller wants to reverse bits it is necessary to call reverse_bits(...) prior
* to comli_prepare.
*/
static void comli_prepare(raw_data_t *dest, const comli_head_t *h, const void *buf, size_t count)
{
/*
* 0 1 2 3 4 5 6 7 8 9 10 11 - - - N-1 N
* +-----+---------+-------+------+-------------------------+-----------+------------+-----+-----+
* | STX | IDh IDl | Stamp | type | addr1 addr2 addr3 addr4 | NOBh NOBl | ...data... | ETX | BCC |
* +-----+---------+-------+------+-------------------------+-----------+------------+-----+-----+
*
* ^ ^
* | |
*begin end
*/
byte_t *out = dest->begin;
/* it's caller responsibility to allocate enough space.
else it is a bug in the program */
if ( (out+11+count+2) > (dest->buf + dest->buf_size) )
fatalx(EXIT_FAILURE, "too small dest in comli_prepare\n");
out[0] = STX;
snprintf((char *)out+1, 10+1, "%02X%1i%1i%04X%02X", h->msg.id, h->msg.stamp, h->msg.type, h->io.addr, h->io.len);
memcpy(out+11, buf, count);
reverse_bits(out+11, count);
out[11+count] = ETX;
out[12+count] = compute_bcc(out+1, 10+count+1);
dest->end = dest->begin + (11+count+2);
}
/**
* prepare AL175 read data request
* @see 2. MESSAGE TYPE 2 (COMMAND SENT FROM MONITORING EQUIPMENT)
* @param dest [out] where to put the result
* @param addr start address of requested area
* @param count no. of requested bytes
*/
static void al_prep_read_req(raw_data_t *dest, unsigned addr, size_t count)
{
comli_head_t h;
h.msg.id = 0x14;
h.msg.stamp = 1;
h.msg.type = 2;
h.io.addr = addr;
h.io.len = count;
comli_prepare(dest, &h, NULL, 0);
}
/**
* prepare AL175 activate command
* @see 4. MESSAGE TYPE 0 (ACTIVATE COMMAND)
* @param dest [out] where to put the result
* @param cmd command type [11]
* @param subcmd command subtype [12]
* @param pr1 first parameter [13:14]
* @param pr2 second parameter [15:16]
* @param pr3 third parameter [17:18]
*/
static void al_prep_activate(raw_data_t *dest, byte_t cmd, byte_t subcmd, uint16_t pr1, uint16_t pr2, uint16_t pr3)
{
comli_head_t h;
char data[8+1];
h.msg.id = 0x14;
h.msg.stamp = 1;
h.msg.type = 0;
h.io.addr = 0x4500;
h.io.len = 8;
/* NOTE: doc says we should use ASCII coding here, but the actual
* values are > 0x80, so we use binary coding */
data[0] = cmd;
data[1] = subcmd;
snprintf(data+2, 6+1, "%2X%2X%2X", pr1, pr2, pr3);
comli_prepare(dest, &h, data, 8);
}
/***********************
* COMLI: INPUT FRAMES *
***********************/
/**
* check COMLI frame for correct layout and bcc
* @param f frame to check
*
* @return 0 (ok) -1 (error)
*/
static int comli_check_frame(/*const*/ raw_data_t f)
{
int bcc;
byte_t *tail;
if (*f.begin!=STX)
return -1;
tail = f.end - 2;
if (tail <= f.begin)
return -1;
if (tail[0]!=ETX)
return -1;
bcc = compute_bcc(f.begin+1, (f.end - f.begin) - 2/*STX & BCC*/);
if (bcc!= tail[1])
return -1;
return 0;
}
/**
* parse reply header from PRS
* @see 3. MESSAGE TYPE 0 (REPLY FROM PRS ON MESSAGE TYPE 2)
*
* @param io [out] parsed io_header
* @param raw_reply_head [in] raw reply header from PRS
* @return 0 (ok), -1 (error)
*
* @see al_parse_reply
*/
static int al_parse_reply_head(io_head_t *io, const raw_data_t raw_reply_head)
{
/*
* 0 1 2 3 4 5 6 7 8 9 10
* +-----+---------+-------+------+-------------------------+-----------+-----------+
* | STX | IDh IDl | Stamp | type | addr1 addr2 addr3 addr4 | NOBh NOBl | ......... |
* +-----+---------+-------+------+-------------------------+-----------+-----------+
*
* ^ ^
* | |
* begin end
*/
unsigned long io_addr, io_len;
const byte_t *reply_head = raw_reply_head.begin - 1;
if ( (raw_reply_head.end - raw_reply_head.begin) != 10) {
upsdebugx(3, "%s: wrong size\t(%i != 10)", __func__, (int)(raw_reply_head.end - raw_reply_head.begin));
return -1; /* wrong size */
}
if (reply_head[1]!='0' || reply_head[2]!='0') {
upsdebugx(3, "%s: wrong id\t('%c%c' != '00')", __func__, reply_head[1], reply_head[2]);
return -1; /* wrong id */
}
if (reply_head[3]!='1') {
upsdebugx(3, "%s: wrong stamp\t('%c' != '1')", __func__, reply_head[3]);
return -1; /* wrong stamp */
}
if (reply_head[4]!='0') {
upsdebugx(3, "%s: wrong type\t('%c' != '0')", __func__, reply_head[4]);
return -1; /* wrong type */
}
io_addr = from_hex(&reply_head[5], 4);
if (io_addr==-1UL) {
upsdebugx(3, "%s: invalid addr\t('%c%c%c%c')", __func__, reply_head[5],reply_head[6],reply_head[7],reply_head[8]);
return -1; /* wrong addr */
}
io_len = from_hex(&reply_head[9], 2);
if (io_len==-1UL) {
upsdebugx(3, "%s: invalid nob\t('%c%c')", __func__, reply_head[9],reply_head[10]);
return -1; /* wrong NOB */
}
if (io_len > IO_LEN_MAX) {
upsdebugx(3, "nob too big\t(%lu > %i)", io_len, IO_LEN_MAX);
return -1; /* too much data claimed */
}
io->addr = io_addr;
io->len = io_len;
return 0;
}
/**
* parse reply from PRS
* @see 3. MESSAGE TYPE 0 (REPLY FROM PRS ON MESSAGE TYPE 2)
* @param io_head [out] parsed io_header
* @param io_buf [in] [out] raw_data where to place incoming data (see ...data... below)
* @param raw_reply raw reply from PRS to check
* @return 0 (ok), -1 (error)
*
* @see al_parse_reply_head
*/
static int al_parse_reply(io_head_t *io_head, raw_data_t *io_buf, /*const*/ raw_data_t raw_reply)
{
/*
* 0 1 2 3 4 5 6 7 8 9 10 11 - - - N-1 N
* +-----+---------+-------+------+-------------------------+-----------+------------+-----+-----+
* | STX | IDh IDl | Stamp | type | addr1 addr2 addr3 addr4 | NOBh NOBl | ...data... | ETX | BCC |
* +-----+---------+-------+------+-------------------------+-----------+------------+-----+-----+
*
* ^ ^
* | |
* begin end
*/
int err;
unsigned i;
const byte_t *reply = raw_reply.begin - 1;
/* 1: extract header and parse it */
/*const*/ raw_data_t raw_reply_head = raw_reply;
if (raw_reply_head.begin + 10 <= raw_reply_head.end)
raw_reply_head.end = raw_reply_head.begin + 10;
err = al_parse_reply_head(io_head, raw_reply_head);
if (err==-1)
return -1;
/* 2: process data */
reply = raw_reply.begin - 1;
if ( (raw_reply.end - raw_reply.begin) != (ptrdiff_t)(10 + io_head->len)) {
upsdebugx(3, "%s: corrupt sentence\t(%i != %i)",
__func__, (int)(raw_reply.end - raw_reply.begin), 10 + io_head->len);
return -1; /* corrupt sentence */
}
/* extract the data */
if (io_buf->buf_size < io_head->len) {
upsdebugx(3, "%s: too much data to fit in io_buf\t(%u > %u)",
__func__, io_head->len, io_buf->buf_size);
return -1; /* too much data to fit in io_buf */
}
io_buf->begin = io_buf->buf;
io_buf->end = io_buf->begin;
for (i=0; i<io_head->len; ++i)
*(io_buf->end++) = reply[11+i];
reverse_bits(io_buf->begin, (io_buf->end - io_buf->begin) );
upsdebug_hex(3, "\t\t--> payload", io_buf->begin, (io_buf->end - io_buf->begin));
return 0; /* all ok */
}
/**
* check acknowledge from PRS
* @see 5. ACKNOWLEDGE FROM PRS
* @param raw_ack raw acknowledge from PRS to check
* @return 0 on success, -1 on error
*/
static int al_check_ack(/*const*/ raw_data_t raw_ack)
{
/*
* 0 1 2 3 4 5 6 7
* +-----+---------+-------+------+-----+-----+-----+
* | STX | IDh IDl | Stamp | type | ACK | ETX | BCC |
* +-----+---------+-------+------+-----+-----+-----+
*
* ^ ^
* | |
* begin end
*/
const byte_t *ack = raw_ack.begin - 1;
if ( (raw_ack.end - raw_ack.begin) !=5) {
upsdebugx(3, "%s: wrong size\t(%i != 5)", __func__, (int)(raw_ack.end - raw_ack.begin));
return -1; /* wrong size */
}
if (ack[1]!='0' || ack[2]!='0') {
upsdebugx(3, "%s: wrong id\t('%c%c' != '00')", __func__, ack[1], ack[2]);
return -1; /* wrong id */
}
/* the following in not mandated. it is just said it will be
* "same as one received". but we always send '1' (0x31) as stamp
* (see 4. MESSAGE TYPE 0 (ACTIVATE COMMAND). Hence, stamp checking
* is hardcoded here.
*/
if (ack[3]!='1') {
upsdebugx(3, "%s: wrong stamp\t('%c' != '1')", __func__, ack[3]);
return -1; /* wrong stamp */
}
if (ack[4]!='1') {
upsdebugx(3, "%s: wrong type\t('%c' != '1')", __func__, ack[4]);
return -1; /* wrong type */
}
if (ack[5]!=ACK) {
upsdebugx(3, "%s: wrong ack\t(0x%02X != 0x%02X)", __func__, ack[5], ACK);
return -1; /* wrong ack */
}
return 0;
}
/******************************************************************/
/**********
* SERIAL *
**********/
/* clear any flow control (copy from powercom.c) */
static void ser_disable_flow_control (void)
{
struct termios tio;
tcgetattr (upsfd, &tio);
tio.c_iflag &= ~ (IXON | IXOFF);
tio.c_cc[VSTART] = _POSIX_VDISABLE;
tio.c_cc[VSTOP] = _POSIX_VDISABLE;
upsdebugx(4, "Flow control disable");
/* disable any flow control */
tcsetattr(upsfd, TCSANOW, &tio);
}
static void flush_rx_queue()
{
ser_flush_in(upsfd, "", /*verbose=*/nut_debug_level);
}
/**
* transmit frame to PRS
*
* @param dmsg debug message prefix
* @param frame the frame to tansmit
* @return 0 (ok) -1 (error)
*/
static int tx(const char *dmsg, /*const*/ raw_data_t frame)
{
int err;
upsdebug_ascii(3, dmsg, frame.begin, (frame.end - frame.begin));
err = ser_send_buf(upsfd, frame.begin, (frame.end - frame.begin) );
if (err==-1) {
upslogx(LOG_ERR, "failed to send frame to PRS: %s", strerror(errno));
return -1;
}
if (err != (frame.end - frame.begin)) {
upslogx(LOG_ERR, "sent incomplete frame to PRS");
return -1;
}
return 0;
}
/***********
* CHATTER *
***********/
static time_t T_io_begin; /* start of current I/O transaction */
static int T_io_timeout; /* in seconds */
/* start new I/O transaction with maximum time limit */
static void io_new_transaction(int timeout)
{
T_io_begin = time(NULL);
T_io_timeout = timeout;
}
/**
* get next character from input stream
*
* @param ch ptr-to where store result
*
* @return -1 (error) 0 (timeout) >0 (got it)
*
*/
static int get_char(char *ch)
{
time_t now = time(NULL);
long rx_timeout;
rx_timeout = T_io_timeout - (now - T_io_begin);
/* negative rx_timeout -> time already out */
if (rx_timeout < 0)
return 0;
return ser_get_char(upsfd, ch, rx_timeout, 0);
}
/**
* get next characters from input stream
*
* @param buf ptr-to output buffer
* @param len buffer length
*
* @return -1 (error) 0 (timeout) >0 (no. of characters actually read)
*
*/
static int get_buf(byte_t *buf, size_t len)
{
time_t now = time(NULL);
long rx_timeout;
rx_timeout = T_io_timeout - (now - T_io_begin);
/* negative rx_timeout -> time already out */
if (rx_timeout < 0)
return 0;
return ser_get_buf_len(upsfd, buf, len, rx_timeout, 0);
}
/**
* scan incoming bytes for specific character
*
* @return 0 (got it) -1 (error)
*/
static int scan_for(char c)
{
char in;
int err;
while (1) {
err = get_char(&in);
if (err==-1 || err==0 /*timeout*/)
return -1;
if (in==c)
break;
}
return 0;
}
/**
* receive 'activate command' ACK from PRS
*
* @return 0 (ok) -1 (error)
*/
static int recv_command_ack()
{
int err;
raw_data_t ack;
byte_t ack_buf[8];
/* 1: STX */
err = scan_for(STX);
if (err==-1)
return -1;
raw_alloc_onstack(&ack, ack_buf);
*(ack.end++) = STX;
/* 2: ID1 ID2 STAMP MSG_TYPE ACK ETX BCC */
err = get_buf(ack.end, 7);
if (err!=7)
return -1;
ack.end += 7;
/* frame constructed - let's verify it */
upsdebug_ascii(3, "rx (ack):\t\t", ack.begin, (ack.end - ack.begin));
/* generic layout */
err = comli_check_frame(ack);
if (err==-1)
return -1;
/* shrink frame */
ack.begin += 1;
ack.end -= 2;
return al_check_ack(ack);
}
/**
* receive 'read register' data from PRS
* @param io [out] io header of received data
* @param io_buf [in] [out] where to place incoming data
*
* @return 0 (ok) -1 (error)
*/
static int recv_register_data(io_head_t *io, raw_data_t *io_buf)
{
int err, ret;
raw_data_t reply_head;
raw_data_t reply;
byte_t reply_head_buf[11];
/* 1: STX */
err = scan_for(STX);
if (err==-1)
return -1;
raw_alloc_onstack(&reply_head, reply_head_buf);
*(reply_head.end++) = STX;
/* 2: ID1 ID2 STAMP MSG_TYPE ADDR1 ADDR2 ADDR3 ADDR4 LEN1 LEN2 */
err = get_buf(reply_head.end, 10);
if (err!=10)
return -1;
reply_head.end += 10;
upsdebug_ascii(3, "rx (head):\t", reply_head.begin, (reply_head.end - reply_head.begin));
/* 3: check header, extract IO info */
reply_head.begin += 1; /* temporarily strip STX */
err = al_parse_reply_head(io, reply_head);
if (err==-1)
return -1;
reply_head.begin -= 1; /* restore STX */
upsdebugx(4, "\t\t--> addr: 0x%x len: 0x%x", io->addr, io->len);
/* 4: allocate space for full reply and copy header there */
reply = raw_xmalloc(11/*head*/ + io->len/*data*/ + 2/*ETX BCC*/);
memcpy(reply.end, reply_head.begin, (reply_head.end - reply_head.begin));
reply.end += (reply_head.end - reply_head.begin);
/* 5: receive tail of the frame */
err = get_buf(reply.end, io->len + 2);
if (err!=(int)(io->len+2)) {
upsdebugx(4, "rx_tail failed, err=%i (!= %i)", err, io->len+2);
ret = -1; goto out;
}
reply.end += io->len + 2;
/* frame constructed, let's verify it */
upsdebug_ascii(3, "rx (head+data):\t", reply.begin, (reply.end - reply.begin));
/* generic layout */
err = comli_check_frame(reply);
if (err==-1) {
upsdebugx(3, "%s: corrupt frame", __func__);
ret = -1; goto out;
}
/* shrink frame */
reply.begin += 1;
reply.end -= 2;
/* XXX: a bit of processing duplication here */
ret = al_parse_reply(io, io_buf, reply);
out:
raw_free(&reply);
return ret;
}
/*****************************************************************/
/*********************
* AL175: DO COMMAND *
*********************/
/**
* do 'ACTIVATE COMMAND'
*
* @return 0 (ok) -1 (error)
*/
static int al175_do(byte_t cmd, byte_t subcmd, uint16_t pr1, uint16_t pr2, uint16_t pr3)
{
int err;
raw_data_t CTRL_frame;
byte_t CTRL_frame_buf[512];
raw_alloc_onstack(&CTRL_frame, CTRL_frame_buf);
al_prep_activate(&CTRL_frame, cmd, subcmd, pr1, pr2, pr3);
flush_rx_queue(); /* DROP */
err = tx("tx (ctrl):\t", CTRL_frame); /* TX */
if (err==-1)
return -1;
return recv_command_ack(); /* RX */
}
/**
* 'READ REGISTER'
*
*/
static int al175_read(byte_t *dst, unsigned addr, size_t count)
{
int err;
raw_data_t REQ_frame;
raw_data_t rx_data;
io_head_t io;
byte_t REQ_frame_buf[512];
raw_alloc_onstack(&REQ_frame, REQ_frame_buf);
al_prep_read_req(&REQ_frame, addr, count);
flush_rx_queue(); /* DROP */
err = tx("tx (req):\t", REQ_frame); /* TX */
if (err==-1)
return -1;
rx_data.buf = dst;
rx_data.buf_size = count;
rx_data.begin = dst;
rx_data.end = dst;
err = recv_register_data(&io, &rx_data);
if (err==-1)
return -1;
if ((rx_data.end - rx_data.begin) != (int)count)
return -1;
if ( (io.addr != addr) || (io.len != count) ) {
upsdebugx(3, "%s: io_head mismatch\t(%x,%x != %x,%x)",
__func__, io.addr, io.len, addr,
(unsigned int)count);
return -1;
}
return 0;
}
/*************
* NUT STUFF *
*************/
/****************************
* ACTIVATE COMMANDS table
*
* see 8. ACTIVATE COMMANDS
*/
typedef int mm_t; /* minutes */
typedef int VV_t; /* voltage */
#define Z1 , 0
#define Z2 , 0, 0
#define Z3 , 0, 0, 0
#define ACT int
ACT TOGGLE_PRS_ONOFF () { return al175_do(0x81, 0x80 Z3); }
ACT CANCEL_BOOST () { return al175_do(0x82, 0x80 Z3); }
ACT STOP_BATTERY_TEST () { return al175_do(0x83, 0x80 Z3); }
ACT START_BATTERY_TEST (VV_t EndVolt, unsigned Minutes)
{ return al175_do(0x83, 0x81, EndVolt, Minutes Z1); }
ACT SET_FLOAT_VOLTAGE (VV_t v) { return al175_do(0x87, 0x80, v Z2); }
ACT SET_BOOST_VOLTAGE (VV_t v) { return al175_do(0x87, 0x81, v Z2); }
ACT SET_HIGH_BATTERY_LIMIT (VV_t Vhigh) { return al175_do(0x87, 0x82, Vhigh Z2); }
ACT SET_LOW_BATTERY_LIMIT (VV_t Vlow) { return al175_do(0x87, 0x83, Vlow Z2); }
ACT SET_DISCONNECT_LEVEL_AND_DELAY
(VV_t level, mm_t delay)
{ return al175_do(0x87, 0x84, level, delay Z1); }
ACT RESET_ALARMS () { return al175_do(0x88, 0x80 Z3); }
ACT CHANGE_COMM_PROTOCOL () { return al175_do(0x89, 0x80 Z3); }
ACT SET_VOLTAGE_AT_ZERO_T (VV_t v) { return al175_do(0x8a, 0x80, v Z2); }
ACT SET_SLOPE_AT_ZERO_T (VV_t mv_per_degree)
{ return al175_do(0x8a, 0x81, mv_per_degree Z2); }
ACT SET_MAX_TCOMP_VOLTAGE (VV_t v) { return al175_do(0x8a, 0x82, v Z2); }
ACT SET_MIN_TCOMP_VOLTAGE (VV_t v) { return al175_do(0x8a, 0x83, v Z2); }
ACT SWITCH_TEMP_COMP (int on) { return al175_do(0x8b, 0x80, on Z2); }
ACT SWITCH_SYM_ALARM () { return al175_do(0x8c, 0x80 Z3); }
/**
* extract double value from a word
*/
static double d16(byte_t data[2])
{
return (data[1] + 0x100*data[0]) / 100.0;
}
void upsdrv_updateinfo(void)
{
/* int flags; */
byte_t x4000[9]; /* registers from 0x4000 to 0x4040 inclusive */
byte_t x4048[2]; /* 0x4048 - 0x4050 */
byte_t x4100[8]; /* 0x4100 - 0x4138 */
byte_t x4180[8]; /* 0x4180 - 0x41b8 */
byte_t x4300[2]; /* 0x4300 - 0x4308 */
int err;
double batt_current = 0.0;
upsdebugx(4, " ");
upsdebugx(4, "UPDATEINFO");
upsdebugx(4, "----------");
io_new_transaction(/*timeout=*/3);
#define RECV(reg) do { \
err = al175_read(x ## reg, 0x ## reg, sizeof(x ## reg)); \
if (err==-1) { \
dstate_datastale(); \
return; \
} \
} while (0)
RECV(4000);
RECV(4048);
RECV(4100);
RECV(4180);
RECV(4300);
status_init();
/* XXX non conformant with NUT naming & not well understood what they mean */
#if 0
/* 0x4000 DIGITAL INPUT 1-8 */
dstate_setinfo("load.fuse", (x4000[0] & 0x80) ? "OK" : "BLOWN");
dstate_setinfo("battery.fuse", (x4000[0] & 0x40) ? "OK" : "BLOWN");
dstate_setinfo("symalarm.fuse", (x4000[0] & 0x20) ? "OK" : "BLOWN");
/* 0x4008 BATTERY INFORMATION */
dstate_setinfo("battery.contactor", (x4000[1] & 0x80) ? "XX" : "YY"); /* FIXME */
dstate_setinfo("load.contactor", (x4000[1] & 0x40) ? "XX" : "YY"); /* FIXME */
dstate_setinfo("lvd.contactor", (x4000[1] & 0x20) ? "XX" : "YY"); /* FIXME */
#endif
if (x4000[0] & 0x40){
dstate_setinfo("battery.fuse", "FAIL");
status_set("RB");
}else{
dstate_setinfo("battery.fuse", "OK");
}
if (x4000[0] & 0x20){
dstate_setinfo("battery.symmetry", "FAIL");
status_set("RB");
}else{
dstate_setinfo("battery.symmetry", "OK");
}
if (x4000[1] & 0x01) /* battery test running */
status_set("TEST");
/* TODO: others from 0x4008 */
/* 0x4010 NOT USED */
/* 0x4018 NOT USED */
switch (x4000[4]) { /* 0x4020 MAINS VOLTAGE STATUS */
case 0: status_set("OL"); break;
case 1: status_set("OB"); break;
case 2: /* doc: "not applicable" */
default:
upsdebugx(2, "%s: invalid mains voltage status\t(%i)", __func__, x4000[4]);
}
/* 0x4028 SYSTEM ON OFF STATUS */
switch (x4000[5]) {
case 0: /* system on */ break;
case 1: status_set("OFF"); break;
default:
upsdebugx(2, "%s: invalid system on/off status\t(%i)", __func__, x4000[5]);
}
switch (x4000[6]) { /* 0x4030 BATTERY TEST FAIL */
case 0: dstate_setinfo("ups.test.result", "OK");
break;
case 1: status_set("RB");
dstate_setinfo("ups.test.result", "FAIL");
break;
default:
upsdebugx(2, "%s: invalid battery test fail\t(%i)", __func__, x4000[6]);
}
switch (x4000[7]) { /* 0x4038 BATTERY VOLTAGE STATUS */
case 0: /* normal */ break;
case 1: status_set("LB"); break;
case 2: status_set("HB"); break;
default:
upsdebugx(2, "%s: invalid battery voltage status\t(%i)", __func__, x4000[7]);
}
switch (x4000[8]) { /* 0x4040 POS./NEG. BATT. CURRENT */
case 0: batt_current = +1.0; break; /* positive */
case 1: batt_current = -1.0; break; /* negative */
default:
upsdebugx(2, "%s: invalid pos/neg battery current\t(%i)", __func__, x4000[8]);
}
switch (x4048[0]) { /* 0x4048 BOOST STATUS */
case 0: /* no boost */; break;
case 1: status_set("BOOST"); break;
default:
upsdebugx(2, "%s: invalid boost status\t(%i)", __func__, x4048[0]);
}
{
const char *v=NULL;
switch (x4048[1]) { /* 0x4050 SYSTEM VOLTAGE STAT. */
case 0: v = "48"; break;
case 1: v = "24"; break;
case 2: v = "12"; break;
case 3: v = "26"; break;
case 4: v = "60"; break;
default:
upsdebugx(2, "%s: invalid system voltage status\t(%i)", __func__, x4048[1]);
}
if (v)
dstate_setinfo("output.voltage.nominal", "%s", v);
}
/* 0x4100 BATTERY VOLTAGE REF */
dstate_setinfo("battery.voltage.nominal", "%.2f", d16(x4100+0));
/* 0x4110 BOOST VOLTAGE REF */
dstate_setinfo("input.transfer.boost.low", "%.2f", d16(x4100+2)); /* XXX: boost.high ? */
/* 0x4120 HIGH BATT VOLT REF XXX */
/* 0x4130 LOW BATT VOLT REF XXX */
/* 0x4180 FLOAT VOLTAGE XXX */
/* 0x4190 BATT CURRENT */
batt_current *= d16(x4180+2);
dstate_setinfo("battery.current", "%.2f", batt_current);
/* 0x41b0 LOAD CURRENT (output.current in NUT) */
dstate_setinfo("output.current", "%.2f", d16(x4180+6));
/* 0x4300 BATTERY TEMPERATURE */
dstate_setinfo("battery.temperature", "%.2f", d16(x4300+0));
status_commit();
upsdebugx(1, "STATUS: %s", dstate_getinfo("ups.status"));
dstate_dataok();
/* out: */
return;
}
void upsdrv_shutdown(void)
{
/* TODO use TOGGLE_PRS_ONOFF for shutdown */
/* tell the UPS to shut down, then return - DO NOT SLEEP HERE */
/* maybe try to detect the UPS here, but try a shutdown even if
it doesn't respond at first if possible */
/* replace with a proper shutdown function */
fatalx(EXIT_FAILURE, "shutdown not supported");
/* you may have to check the line status since the commands
for toggling power are frequently different for OL vs. OB */
/* OL: this must power cycle the load if possible */
/* OB: the load must remain off until the power returns */
}
static int instcmd(const char *cmdname, const char *extra)
{
int err;
upsdebugx(1, "INSTCMD: %s", cmdname);
io_new_transaction(/*timeout=*/5);
/*
* test.battery.start
* test.battery.stop
*/
if (!strcasecmp(cmdname, "test.battery.start")) {
err = START_BATTERY_TEST(24, 1);
return (!err ? STAT_INSTCMD_HANDLED : STAT_INSTCMD_FAILED);
}
if (!strcasecmp(cmdname, "test.battery.stop")) {
err = STOP_BATTERY_TEST();
return (!err ? STAT_INSTCMD_HANDLED : STAT_INSTCMD_FAILED);
}
upslogx(LOG_NOTICE, "instcmd: unknown command [%s]", cmdname);
return STAT_INSTCMD_UNKNOWN;
}
/* no help */
void upsdrv_help(void)
{
}
/* no -x flags */
void upsdrv_makevartable(void)
{
}
void upsdrv_initups(void)
{
upsfd = ser_open(device_path);
ser_set_speed(upsfd, device_path, B9600);
ser_disable_flow_control();
}
void upsdrv_cleanup(void)
{
ser_close(upsfd, device_path);
}
void upsdrv_initinfo(void)
{
/* TODO issue short io with UPS to detect it's presence */
/* try to detect the UPS here - call fatal_with_errno(EXIT_FAILURE, ) if it fails */
dstate_setinfo("ups.mfr", "Eltek");
dstate_setinfo("ups.model", "AL175");
/* ... */
/* instant commands */
dstate_addcmd ("test.battery.start");
dstate_addcmd ("test.battery.stop");
/* TODO rest instcmd(s) */
upsh.instcmd = instcmd;
}
Reference in New Issue View Git Blame Copy Permalink