nut-debian/Makefile.am
2022-07-10 09:23:45 +02:00

349 lines
15 KiB
Makefile

# top-level Makefile for NUT
# include directory for aclocal
ACLOCAL_AMFLAGS = -I m4
# subdirectories to build and distribute. The order matters, as
# several subdirectories depend on stuff in "common" or tools being built first
SUBDIRS = include common clients conf data docs drivers tools \
lib scripts server tests
# Automatically update the libtool script if it becomes out-of-date
# See https://www.gnu.org/software/libtool/manual/html_node/LT_005fINIT.html
LIBTOOL_DEPS = @LIBTOOL_DEPS@
libtool: $(LIBTOOL_DEPS)
$(SHELL) ./config.status libtool
# COPYING is included automatically.
EXTRA_DIST = INSTALL.nut LICENSE-GPL2 LICENSE-GPL3 MAINTAINERS UPGRADING
# ----------------------------------------------------------------------
# flags to pass to ./configure when calling "make distcheck" and "make
# distcheck-light". Try to check as many features as possible! Also
# need to give augeas-lenses-dir, hotplug-dir and udev-dir, so that
# staged install does not fail.
DISTCHECK_FLAGS = --with-all --with-ssl --with-doc=auto
DISTCHECK_LIGHT_FLAGS = --with-all=auto --with-ssl=auto --with-doc=auto
DISTCHECK_VALGRIND_FLAGS = --with-all=auto --with-ssl=auto --with-doc=skip --with-valgrind CXXFLAGS='$(CXXFLAGS) -g' CFLAGS='$(CFLAGS) -g'
DISTCHECK_CONFIGURE_FLAGS = ${DISTCHECK_FLAGS} \
--with-systemdsystemunitdir='$${prefix}/lib/systemd/system' \
--with-systemdshutdowndir='$${prefix}/lib/systemd/system-shutdown' \
--with-systemdtmpfilesdir='$${prefix}/usr/lib/tmpfiles.d' \
--with-augeas-lenses-dir='$${prefix}/usr/share/augeas/lenses' \
--with-hotplug-dir='$${prefix}/etc/hotplug' \
--with-udev-dir='$${prefix}/etc/udev' \
--with-devd-dir='$${prefix}/etc/devd'
distcheck-light:
$(MAKE) $(AM_MAKEFLAGS) DISTCHECK_FLAGS="$(DISTCHECK_LIGHT_FLAGS)" distcheck
# Make a distcheck (and check in particular) with enabled valgrind and debug info
memcheck distcheck-valgrind:
$(MAKE) $(AM_MAKEFLAGS) DISTCHECK_FLAGS="$(DISTCHECK_VALGRIND_FLAGS)" distcheck
# workaround the dist generated files that are also part of the distribution
# Note that distcleancheck is disabled for now, while waiting for a proper
# solution, that do not break older unix systems
#distcleancheck_listfiles = \
# find . -type f -exec sh -c 'test -f $(srcdir)/{} || echo {}' ';'
distcleancheck:
@:
# Quick alias for root dir recipe:
realclean: maintainer-clean
# Files made by our targets:
CLEANFILES = *-spellchecked cppcheck*.xml
DISTCLEANFILES = ChangeLog
# Most of the files generated by custom rules in the configure script
# or by autogen.sh are cleaned by the Makefile.am in their directories.
# Files below are re-created by running `configure` script and may be
# wiped by a `make distclean`:
DISTCLEANFILES += config.log configure~
#???# configure.ac~
DISTCLEANFILES += include/config.h.in~
# Files made by autotools and common rituals of the configure script,
# these are needed to run the configure script itself so are not wiped
# by a mere `make distclean`; most of these are copied by autotools
# from their installation, or made by `automake` etc. on the system
# which generates `configure`; rebuilding NUT after deleting these
# requires `autogen.sh` script to be re-run (and tools available):
MAINTAINERCLEANFILES = INSTALL
MAINTAINERCLEANFILES += aclocal.m4 config.guess config.sub
MAINTAINERCLEANFILES += configure
MAINTAINERCLEANFILES += depcomp install-sh ltmain.sh test-driver
MAINTAINERCLEANFILES += m4/libtool.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4 m4/lt~obsolete.m4
MAINTAINERCLEANFILES += Makefile.in .dirstamp include/config.h.in
# Executed after default rules
maintainer-clean-local:
rm -f missing || true
# Do not let $SUBDIRS/Makefile rules delete their local .deps because
# this breaks our ability to clean up (e.g. some common/.../*.Plo files
# are included by generated Makefiles from other subdirectories, so they
# should be available during their clean-up). Just in case, we make sure
# here that their sub-distcleans complete first.
distclean-local:
@for DIR in $(SUBDIRS) ; do \
if test -f "$${DIR}/Makefile" ; then \
echo " DISTCLEAN in $${DIR}" >&2 ; \
( cd "$${DIR}" && $(MAKE) -s distclean ) || exit ; \
fi ; \
done
rm -rf .inst tmp autom4te.cache
find "$(builddir)" -type d -name '.deps' | while read DIR ; do rm -rf "$${DIR}" ; done
# Hook the documentation building and validating recipes
# Note: these are optionally available (as determined during configure runs)
spellcheck spellcheck-interactive:
@RES=0; \
(cd $(builddir)/docs && $(MAKE) -s $@) || RES=$$? ; \
(cd $(builddir)/docs/man && $(MAKE) -s $@) || RES=$$? ; \
(cd $(builddir)/conf && $(MAKE) -s $@) || RES=$$? ; \
(cd $(builddir)/data && $(MAKE) -s $@) || RES=$$? ; \
exit $$RES
# Note: the "all-docs" and "check-docs" targets may require tools not
# found by `configure` script (and so avoided by conventional recipes)
# such as PDF generators, so it should only be called at developer's
# discretion, choice and risk. The "check-man" targets covers source
# texts, man pages and HTML rendering of man pages, as enabled by tools.
doc spellcheck-sortdict \
all-docs check-docs \
man all-man man-man check-man man-html all-html:
cd $(builddir)/docs && $(MAKE) $@
check-NIT check-NIT-devel:
cd $(builddir)/tests/NIT && $(MAKE) $@
# This target adds syntax-checking for committed shell script files,
# to avoid surprises and delays in finding fatal typos after packaging
###
### Note: currently, shellcheck target calls check-scripts-syntax
### so when both are invoked at once, in the end the check is only
### executed once. Later it is anticipated that shellcheck would
### be implemented by requiring, configuring and calling the tool
### named "shellcheck" for even more code inspection and details.
### Still, there remains value in also checking the script syntax
### by the very version of the shell interpreter that would run
### these scripts in production usage of the resulting packages.
###
check-scripts-syntax:
@echo 'NOTE: modern bash complains about scripts using backticks (warning not error), which we ignore in NUT codebase for portability reasons: `...` obsolete, use $$(...)'
@RUNBASH=bash; if [ -x /bin/bash ]; then RUNBASH=/bin/bash ; else if [ -x /usr/bin/env ] ; then RUNBASH="/usr/bin/env bash"; fi; fi ; \
for F in `git ls-files || find . -type f` ; do \
case "`file "$$F"`" in \
*"Bourne-Again shell script"*) ( set -x ; $$RUNBASH -n "$$F" ; ) ;; \
*"POSIX shell script"*|*"shell script"*) ( set -x ; /bin/sh -n "$$F" ; ) ;; \
esac || { RES=$$? ; echo "ERROR: Syntax check failed for script file: $$F" >&2 ; exit $$RES ; } ; \
done
@echo 'SUCCESS: Shell scripts syntax is acceptable, no fatal issues were found'
shellcheck-disclaimer:
@echo "==============================================================================="
@echo "NOTICE: 'make shellcheck' is currently an alias for 'make check-scripts-syntax'"
@echo "Later it may become a call to the real shellcheck tool (if available on the"
@echo "build system during the configure phase)"
@echo "==============================================================================="
# Note: currently not part of shellcheck target, because the script below
# can test the logic with numerous SHELL_PROGS in a CI setting, and because
# check-scripts-syntax probably has checked the basic syntax above already.
shellcheck-nde:
cd $(srcdir)/tests && SERVICE_FRAMEWORK="selftest" ./nut-driver-enumerator-test.sh
shellcheck: shellcheck-disclaimer check-scripts-syntax
CPPCHECK = @CPPCHECK@
if HAVE_CPPCHECK
cppcheck: cppcheck-cxx11.xml cppcheck-c99.xml
# Let the analysis get regenerated due to any change in source;
# but note that with our different make implementations to support,
# we can not either $(shell find ...) nor blindly say e.g. *.cpp
# for each FS structure layer because e.g. there are no ./*.cpp
# in the root dir of the codebase (and so make complains there is
# `No rule to make target `*.cpp', needed by `cppcheck-cxx11.xml'`)
#
# Note that the actual `cppcheck` scan finds all files it likes
# (so if CPPCHECK_SRC_* misses something, it just won't trigger
# automagically a rebuild of the XML in developer working cycles).
CPPCHECK_SRC_H = $(top_srcdir)/*/*.h $(top_srcdir)/*/*/*.h
# CPPCHECK_SRC_H += $(top_srcdir)/*.h
CPPCHECK_SRC_C = $(top_srcdir)/*/*.c $(top_srcdir)/*/*/*.c
# CPPCHECK_SRC_C += $(top_srcdir)/*.cpp
CPPCHECK_SRC_CXX = $(top_srcdir)/*/*.cpp
# CPPCHECK_SRC_CXX += $(top_srcdir)/*.cpp $(top_srcdir)/*/*/*.cpp
cppcheck-cxx11.xml: $(CPPCHECK_SRC_CXX) $(CPPCHECK_SRC_H)
$(CPPCHECK) --std=c++11 --enable=all --inconclusive --xml --xml-version=2 . 2>$@
cppcheck-c99.xml: $(CPPCHECK_SRC_C) $(CPPCHECK_SRC_H)
$(CPPCHECK) --std=c99 --enable=all --inconclusive --xml --xml-version=2 . 2>$@
else !HAVE_CPPCHECK
cppcheck:
@echo "CPPCHECK analysis not available since 'cppcheck' was not found."
endif !HAVE_CPPCHECK
# ----------------------------------------------------------------------
# Automatically generate the ChangeLog from Git logs:
MAINTAINERCLEANFILES += ChangeLog
# Older boundary of the ChangeLog commits range
# It can be a tag ('v2.2.0'), a commit hash, a date, ...
# See gitrevisions for more information on specifying ranges
GITLOG_START_POINT=v2.6.0
# Force ChangeLog regeneration upon make dist (due to nonexistant 'dummy-stamp'),
# in case it has already been generated previously
# Note that the script is hard-coded to generate "ChangeLog" in the current dir
dummy-stamp:
ChangeLog: tools/gitlog2changelog.py dummy-stamp
cd $(top_builddir) && \
./tools/gitlog2changelog.py $(GITLOG_START_POINT) || \
{ echo "gitlog2changelog.py failed to generate the ChangeLog. See https://github.com/networkupstools/nut/commits/master" > $@ ; }
nut_version.h include/nut_version.h:
cd $(abs_top_builddir)/include && $(MAKE) nut_version.h
tools/gitlog2changelog.py: tools/gitlog2changelog.py.in
cd $(@D) && $(MAKE) -s $(@F)
# ----------------------------------------------------------------------
# Maintainers targets: distribution signature and hashes
nut-@PACKAGE_VERSION@.tar.gz: dist
nut-@PACKAGE_VERSION@.tar.gz.sig: dist-sig
nut-@PACKAGE_VERSION@.tar.gz.md5 nut-@PACKAGE_VERSION@.tar.gz.sha256: dist-hash
dist-sig: nut-@PACKAGE_VERSION@.tar.gz
rm -f nut-@PACKAGE_VERSION@.tar.gz.sig
gpg --detach-sign nut-@PACKAGE_VERSION@.tar.gz
dist-hash: nut-@PACKAGE_VERSION@.tar.gz
md5sum nut-@PACKAGE_VERSION@.tar.gz > nut-@PACKAGE_VERSION@.tar.gz.md5
sha256sum nut-@PACKAGE_VERSION@.tar.gz > nut-@PACKAGE_VERSION@.tar.gz.sha256
# ----------------------------------------------------------------------
# targets from old build system (pre-automake).
# supported for a period of time for backward "compatibility".
WARN="----------------------------------------------------------------------"
build:
@echo $(WARN)
@echo "Warning: 'make build' is deprecated. Use 'make all' instead."
@echo $(WARN)
$(MAKE) $(AM_MAKEFLAGS) all
install-bin:
@echo $(WARN)
@echo "Warning: 'make install-bin' is deprecated."
@echo "Use 'make install-exec' instead for a similar effect."
@echo $(WARN)
cd common; $(MAKE) $(AM_MAKEFLAGS) install
cd drivers; $(MAKE) $(AM_MAKEFLAGS) install
cd server; $(MAKE) $(AM_MAKEFLAGS) install
cd clients; $(MAKE) $(AM_MAKEFLAGS) install
install-man: install-data-recursive
@echo $(WARN)
@echo "Warning: 'make install-man' is deprecated."
@echo "Use 'cd man; make install' instead."
@echo $(WARN)
cd man; $(MAKE) $(AM_MAKEFLAGS) install
install-conf:
@echo $(WARN)
@echo "Warning: 'make install-conf' is deprecated."
@echo "Use 'cd conf; make install' instead."
@echo $(WARN)
cd conf; $(MAKE) $(AM_MAKEFLAGS) install
# The target install-data already has a standardized meaning under automake
install-dirs:
@echo $(WARN)
@echo "Warning: 'make install-dirs' is deprecated."
@echo "Use 'make installdirs' instead."
@echo $(WARN)
$(MAKE) installdirs
cgi build-cgi install-cgi install-cgi-dir install-cgi-bin \
install-cgi-man install-cgi-conf install-cgi-html:
@echo "Error: 'make $@' no longer exists."
@echo "Use './configure --with-cgi' instead."
install-lib:
@echo "Error: 'make $@' no longer exists."
@echo "Use './configure --with-dev' instead."
usb build-usb install-usb:
@echo "Error: 'make $@' no longer exists."
@echo "Use './configure --with-usb' instead."
snmp build-snmp install-snmp install-snmp-mgr install-snmp-man:
@echo "Error: 'make $@' no longer exists."
@echo "Use './configure --with-snmp' instead."
setver:
@echo "Error: 'make setver' no longer exists."
@echo "Edit configure.ac to set version number."
# Clean the dist tarball and packages
MAINTAINERCLEANFILES_DISTBALL = nut-*.tar.gz
# HP-UX:
MAINTAINERCLEANFILES_PACKAGES = NUT_HPUX_package@PACKAGE_VERSION@.depot
# AIX as below, and RedHat-compatible (cover binary and source packages):
MAINTAINERCLEANFILES_PACKAGES += nut*rpm
# Debian-compatible (cover binary and source packages):
MAINTAINERCLEANFILES_PACKAGES += nut*deb
# Solaris SVR4 package archives:
MAINTAINERCLEANFILES_PACKAGES += NUT_solaris_*_package@PACKAGE_VERSION@.local.gz
# Newer Solaris IPS (aka "pkg(5)" format archives)
MAINTAINERCLEANFILES_PACKAGES += *.p5p
MAINTAINERCLEANFILES += $(MAINTAINERCLEANFILES_DISTBALL)
MAINTAINERCLEANFILES += $(MAINTAINERCLEANFILES_PACKAGES)
package: dist
DESTDIR="$(abs_builddir)/_install_pkgprotodir" ; export DESTDIR; \
rm -rf "$$DESTDIR"; \
case "`uname -s`" in \
"HP-UX") \
( cd scripts/HP-UX && \
$(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$DESTDIR" package && \
mv NUT_HPUX_package.depot $(abs_top_builddir)/NUT_HPUX_package@PACKAGE_VERSION@.depot ) ;; \
"SunOS") \
$(MAKE) $(AM_MAKEFLAGS) && \
$(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$DESTDIR" install && \
( cd scripts/Solaris && \
$(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$DESTDIR" package ) && \
$(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$DESTDIR" uninstall && \
rm -rf "$$DESTDIR" || \
{ echo "FAILED to produce SunOS packages, inspect '$$DESTDIR' for clues" >&2 ; exit 1; } ;; \
"AIX") \
if test -d /usr/src/packages/SPECS -a -w /usr/src/packages/SPECS ; then : ; else echo "Can not write to /usr/src/packages/SPECS" >&2 ; exit 1; fi ; \
if test -d /usr/src/packages/SOURCES -a -w /usr/src/packages/SOURCES ; then : ; else echo "Can not write to /usr/src/packages/SOURCES" >&2 ; exit 1; fi ; \
$(MAKE) $(AM_MAKEFLAGS) dist && \
cp scripts/Aix/nut-aix.spec /usr/src/packages/SPECS && \
cp scripts/Aix/nut.init nut-@PACKAGE_VERSION@.tar.gz /usr/src/packages/SOURCES && \
rpm -ba /usr/src/packages/SPECS/nut-aix.spec && \
mv /usr/src/packages/RPMS/nut*rpm $(abs_top_builddir)/ ;; \
*) echo "Unsupported OS for 'make $@' (no recipe bound)" >&2; exit 1;; \
esac
print-MAINTAINERCLEANFILES print-REALCLEANFILES:
@echo $(MAINTAINERCLEANFILES)
print-DISTCLEANFILES:
@echo $(DISTCLEANFILES)
# TODO: Recursive mode to consider patterns defined in sub-dir makefiles
git-realclean-check:
@if test -e .git && (command -v git); then \
git status --ignored || while read F ; do \
for P in $(MAINTAINERCLEANFILES) ; do \
case "$$F" in \
*/$$P) exit 1 ;; \
esac ; \
done; \
done ; \
fi