595 lines
38 KiB
C
595 lines
38 KiB
C
/*
|
|
* bcmxcp.h -- header for BCM/XCP module
|
|
*/
|
|
|
|
#ifndef _POWERWARE_H
|
|
#define _POWERWARE_H
|
|
|
|
#include "timehead.h"
|
|
|
|
/* Have to wait at least 0,25 sec max 16 sec */
|
|
/* 1 second is too short for PW9120 (leads to communication errors). So we set it to 2 seconds */
|
|
#define PW_SLEEP 2
|
|
|
|
#define PW_MAX_TRY 3 /* How many times we try to send data. */
|
|
|
|
#define PW_COMMAND_START_BYTE (unsigned char)0xAB
|
|
#define PW_LAST_SEQ (unsigned char)0x80 /* bit flag to indicate final sequence */
|
|
#define PW_SEQ_MASK (unsigned char)0x7F /* bit mask to extract just the sequence # */
|
|
|
|
#define PW_ANSWER_MAX_SIZE 256
|
|
|
|
/* No Autorisation required */
|
|
#define PW_ID_BLOCK_REQ (unsigned char)0x31 /* Model name, ... length 1 */
|
|
#define PW_EVENT_HISTORY_LOG_REQ (unsigned char)0x32 /* List alarms that have occured. length 1 */
|
|
#define PW_STATUS_REQ (unsigned char)0x33 /* On Line, On Bypass, ... length 1-2 */
|
|
#define PW_METER_BLOCK_REQ (unsigned char)0x34 /* Current UPS status (Load, utility,...) length 1 */
|
|
#define PW_CUR_ALARM_REQ (unsigned char)0x35 /* Current alarm and event request. length 1 */
|
|
#define PW_CONFIG_BLOCK_REQ (unsigned char)0x36 /* Model serial#, ... length 1 */
|
|
#define PW_UTILITY_STATISTICS_BLOCK_REQ (unsigned char)0x38 /* List utility power quality. length 1 */
|
|
#define PW_WAVEFORM_BLOCK_REQ (unsigned char)0x3A /* Sampled waveform data. length 7 */
|
|
#define PW_BATTERY_REQ (unsigned char)0x3B /* Charging, floating, ... length 1 */
|
|
#define PW_LIMIT_BLOCK_REQ (unsigned char)0x3C /* Configuration (Bypass thresholds,...). length 1 */
|
|
#define PW_TEST_RESULT_REQ (unsigned char)0x3F /* Get the results for a system test. length 1 */
|
|
#define PW_COMMAND_LIST_REQ (unsigned char)0x40 /* Available commands. length 1 */
|
|
#define PW_OUT_MON_BLOCK_REQ (unsigned char)0x41 /* Outlet monitor request length 1 */
|
|
#define PW_COM_CAP_REQ (unsigned char)0x42 /* Request communication capabilities. length 2 */
|
|
#define PW_UPS_TOP_DATA_REQ (unsigned char)0x43 /* Request ups topology data requset. length 1 */
|
|
#define PW_COM_PORT_LIST_BLOCK_REQ (unsigned char)0x44 /* Request communication port list. length 1 */
|
|
#define PW_REQUEST_SCRATCHPAD_DATA_REQ (unsigned char)0x45 /* Request data from scratchpad. length 2*/
|
|
|
|
/* Need autorisation before these commands */
|
|
#define PW_GO_TO_BYPASS (unsigned char)0x88 /* Transfer load from inverter to bypass. length 1 or 3 */
|
|
#define PW_UPS_ON (unsigned char)0x89 /* UPS on command. length 1-2 */
|
|
#define PW_LOAD_OFF_RESTART (unsigned char)0x8A /* Delayed LoadPowerOff & Restart command. length 2-4 */
|
|
#define PW_UPS_OFF (unsigned char)0x8B /* UPS off command. length 1-2 */
|
|
#define PW_DECREMENT_OUTPUT_VOLTAGE (unsigned char)0x8C /* Decrease output voltage. length 1 */
|
|
#define PW_INCREMENT_OUTPUT_VOLTAGE (unsigned char)0x8D /* Increase output voltage. length 1 */
|
|
#define PW_SET_TIME_AND_DATE (unsigned char)0x90 /* Set the real-time clock inside UPS. length 8 */
|
|
#define PW_UPS_ON_TIME (unsigned char)0x91 /* Scheduled UPS on in n minutes. length 3-4 */
|
|
#define PW_UPS_ON_AT_TIME (unsigned char)0x92 /* Schedule UPS on at specified date and time. length 7-8 */
|
|
#define PW_UPS_OFF_TIME (unsigned char)0x93 /* Scheduled UPS off in n minutes. length 3-4 */
|
|
#define PW_UPS_OFF_AT_TIME (unsigned char)0x94 /* Schedule UPS off at specified date and time. length 7-8 */
|
|
#define PW_SET_CONF_COMMAND (unsigned char)0x95 /* Set configuration command. length 4 */
|
|
#define PW_SET_OUTLET_COMMAND (unsigned char)0x97 /* Set outlet parameter command length 5. not in 5115 */
|
|
#define PW_SET_COM_COMMAND (unsigned char)0x98 /* Set communication parameter command. length 5 */
|
|
#define PW_SET_SCRATHPAD_SECTOR (unsigned char)0x99 /* Write data to scratchpad. length 3 or 18 */
|
|
#define PW_SET_POWER_STRATEGY (unsigned char)0x9A /* Set the power strategy. length 2 */
|
|
#define PW_SET_REQ_ONLY_MODE (unsigned char)0xA0 /* Set request only mode command. length 1 */
|
|
#define PW_SET_UNREQUESTED_MODE (unsigned char)0xA1 /* Set unrequested mode command. length 1 */
|
|
#define PW_INIT_BAT_TEST (unsigned char)0xB1 /* Initiate battery test command. length 3 */
|
|
#define PW_INIT_SYS_TEST (unsigned char)0xB2 /* Initiate general system test command. length 2 */
|
|
#define PW_SELECT_SUBMODULE (unsigned char)0xCE /* Select a sub module. length 2-7 */
|
|
#define PW_AUTHORIZATION_CODE (unsigned char)0xCF /* Authorization code. length 4 or 7 */
|
|
|
|
/* Define the XCP system test */
|
|
#define PW_SYS_TEST_GENERAL (unsigned char)0x01 /* Initiate General system Test */
|
|
#define PW_SYS_TEST_SCHEDULE_BATTERY_COMMISSION (unsigned char)0x02 /* Schedule Battery Commissioning Test */
|
|
#define PW_SYS_TEST_ALTERNATE_AC_INPUT (unsigned char)0x03 /* Test Alternate AC Input */
|
|
#define PW_SYS_TEST_FLASH_LIGHTS (unsigned char)0x04 /* Flash the Lights Test */
|
|
#define PW_SYS_TEST_REPORT_CAPABILITIES (unsigned char)0xFF /* Report Systems Test Capabilities */
|
|
|
|
/* Outlet operations */
|
|
#define PW_ALL_OUTLETS 0
|
|
#define PW_AUTO_OFF_DELAY 1
|
|
#define PW_AUTO_ON_DELAY 2
|
|
/* 0 means Abort countdown */
|
|
#define PW_TURN_OFF_DELAY 3
|
|
#define PW_TURN_ON_DELAY 4
|
|
|
|
/* Config block offsets */
|
|
#define BCMXCP_CONFIG_BLOCK_MACHINE_TYPE_CODE 0
|
|
#define BCMXCP_CONFIG_BLOCK_MODEL_NUMBER 2
|
|
#define BCMXCP_CONFIG_BLOCK_MODEL_CONF_WORD 4
|
|
#define BCMXCP_CONFIG_BLOCK_INPUT_FREQ_DEV_LIMIT 6
|
|
#define BCMXCP_CONFIG_BLOCK_NOMINAL_OUTPUT_VOLTAGE 8
|
|
#define BCMXCP_CONFIG_BLOCK_NOMINAL_OUTPUT_FREQ 10
|
|
#define BCMXCP_CONFIG_BLOCK_OUTPUT_PHASE_ANGLE 12
|
|
#define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD1 14
|
|
#define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_BYTE3 16 /* KEEP THIS UNTILL PARSING OK. USE THIS BYTE. */
|
|
#define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD2 16
|
|
#define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD3 18
|
|
#define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD4 20
|
|
#define BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD1 22 /* Undefined at this time.*/
|
|
#define BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD2 24 /* Per cell inverter shutdown voltage at full rated load. (volt/cell)* 100 */
|
|
#define BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD3 26 /* LOW BYTE Number of battery strings. HIGH BYTE undefined at this time.*/
|
|
#define BCMXCP_CONFIG_BLOCK_EXTENDED_BLOCK_LENGTH 47
|
|
#define BCMXCP_CONFIG_BLOCK_PART_NUMBER 48
|
|
#define BCMXCP_CONFIG_BLOCK_SERIAL_NUMBER 64
|
|
|
|
/* Index for Extende Limits block offsets */
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_INPUT_VOLTAGE 0
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_INPUT_FREQ 2
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_TRUE_POWER 4
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_COMM_SPEC_VERSION 6
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_FREQ_DEV_LIMIT 8
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_VOLTAGE_LOW_DEV_LIMIT 10
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_VOLTAGE_HIGE_DEV_LIMIT 12
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_PHASE_DEV_LIMIT 14
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_LOW_BATT_WARNING 16
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_HORN_STATUS 17
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_MIN_INPUT_VOLTAGE 18
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_MAX_INPUT_VOLTAGE 20
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_RETURN_STAB_DELAY 22
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_BATT_CAPACITY_RETURN 24
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_AMBIENT_TEMP_LOW 25
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_AMBIENT_TEMP_HIGE 26
|
|
|
|
/* Indexes for meter map */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VOLTS_AB 0 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VOLTS_BC 1 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VOLTS_CA 2 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_VOLTS_AB 3 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_VOLTS_BC 4 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_VOLTS_CA 5 /* mapped */
|
|
#define BCMXCP_METER_MAP_INVERTER_VOLTS_AB 6
|
|
#define BCMXCP_METER_MAP_INVERTER_VOLTS_BC 7
|
|
#define BCMXCP_METER_MAP_INVERTER_VOLTS_CA 8
|
|
#define BCMXCP_METER_MAP_BYPASS_VOLTS_AB 9
|
|
#define BCMXCP_METER_MAP_BYPASS_VOLTS_BC 10
|
|
#define BCMXCP_METER_MAP_BYPASS_VOLTS_CA 11
|
|
#define BCMXCP_METER_MAP_MAIN_LOGIC_POWER 12
|
|
#define BCMXCP_METER_MAP_SECONDARY_V_PLUS_POWER 13
|
|
#define BCMXCP_METER_MAP_SECONDARY_V_MINUS_POWER 14
|
|
#define BCMXCP_METER_MAP_INVERTER_AVG_CURRENT_PHASE_A 15
|
|
#define BCMXCP_METER_MAP_INVERTER_AVG_CURRENT_PHASE_B 16
|
|
#define BCMXCP_METER_MAP_INVERTER_AVG_CURRENT_PHASE_C 17
|
|
#define BCMXCP_METER_MAP_INPUT_CURRENT_PHASE_A 18 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_CURRENT_PHASE_B 19 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_CURRENT_PHASE_C 20 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_WATTS 21
|
|
#define BCMXCP_METER_MAP_INPUT_WATTS 22 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VA 23 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_VA 24 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_POWER_FACTOR 25 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_POWER_FACTOR 26 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_FREQUENCY 27 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_FREQUENCY 28 /* mapped */
|
|
#define BCMXCP_METER_MAP_INVERTER_FREQUENCY 29
|
|
#define BCMXCP_METER_MAP_BYPASS_FREQUENCY 30 /* mapped */
|
|
#define BCMXCP_METER_MAP_DC_LINK_VOLTS_DC 31
|
|
#define BCMXCP_METER_MAP_BATTERY_CURRENT 32 /* mapped */
|
|
#define BCMXCP_METER_MAP_BATTERY_VOLTAGE 33 /* mapped */
|
|
#define BCMXCP_METER_MAP_PERCENT_BATTERY_LEFT 34 /* mapped */
|
|
#define BCMXCP_METER_MAP_BATTERY_TIME_REMAINING 35 /* mapped */
|
|
#define BCMXCP_METER_MAP_BATTERY_CHARGE_TIME 36
|
|
#define BCMXCP_METER_MAP_PEAK_INVERTER_CURRENT_PHASE_A 37
|
|
#define BCMXCP_METER_MAP_PEAK_INVERTER_CURRENT_PHASE_B 38
|
|
#define BCMXCP_METER_MAP_PEAK_INVERTER_CURRENT_PHASE_C 39
|
|
#define BCMXCP_METER_MAP_AVG_INPUT_CURRENT_3_PHASE_SUM 40
|
|
#define BCMXCP_METER_MAP_BATTERY_DCUV_BAR_CHART 41 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_CURRENT_BAR_CHART 42
|
|
#define BCMXCP_METER_MAP_LOW_BATTERY_WARNING_V_BAR_CHART 43 /* mapped */
|
|
#define BCMXCP_METER_MAP_DC_VOLTS_BAR_CHART 44
|
|
#define BCMXCP_METER_MAP_BATTERY_CHARGING_CURRENT_BAR_CHART 45
|
|
#define BCMXCP_METER_MAP_BATTERY_DISCHARGING_CURRENT_BAR_CHART 46 /* mapped */
|
|
#define BCMXCP_METER_MAP_PERCENT_LOAD_PHASE_A 47 /* mapped */
|
|
#define BCMXCP_METER_MAP_PERCENT_LOAD_PHASE_B 48 /* mapped */
|
|
#define BCMXCP_METER_MAP_PERCENT_LOAD_PHASE_C 49 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VA_PHASE_A 50 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VA_PHASE_B 51 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VA_PHASE_C 52 /* mapped */
|
|
#define BCMXCP_METER_MAP_BYPASS_VOLTS_PHASE_A 53 /* mapped */
|
|
#define BCMXCP_METER_MAP_BYPASS_VOLTS_PHASE_B 54 /* mapped */
|
|
#define BCMXCP_METER_MAP_BYPASS_VOLTS_PHASE_C 55 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_VOLTS_PHASE_A 56 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_VOLTS_PHASE_B 57 /* mapped */
|
|
#define BCMXCP_METER_MAP_INPUT_VOLTS_PHASE_C 58 /* mapped */
|
|
#define BCMXCP_METER_MAP_INVERTER_VOLTS_PHASE_A 59
|
|
#define BCMXCP_METER_MAP_INVERTER_VOLTS_PHASE_B 60
|
|
#define BCMXCP_METER_MAP_INVERTER_VOLTS_PHASE_C 61
|
|
#define BCMXCP_METER_MAP_AMBIENT_TEMPERATURE 62 /* mapped */
|
|
#define BCMXCP_METER_MAP_HEATSINK_TEMPERATURE 63 /* mapped */
|
|
#define BCMXCP_METER_MAP_POWER_SUPPLY_TEMPERATURE 64 /* mapped */
|
|
#define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A 65 /* mapped */
|
|
#define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_B 66 /* mapped */
|
|
#define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_C 67 /* mapped */
|
|
#define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A_BAR_CHART 68 /* mapped */
|
|
#define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_B_BAR_CHART 69 /* mapped */
|
|
#define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_C_BAR_CHART 70 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VA_BAR_CHART 71 /* mapped */
|
|
#define BCMXCP_METER_MAP_DATE 72 /* mapped */
|
|
#define BCMXCP_METER_MAP_TIME 73 /* mapped */
|
|
#define BCMXCP_METER_MAP_POSITIVE_DC_LINK_RAIL_VOLTAGE 74
|
|
#define BCMXCP_METER_MAP_NEGATIVE_DC_LINK_RAIL_VOLTAGE 75
|
|
#define BCMXCP_METER_MAP_AUTO_BALANCE_VOLTAGE_DC 76
|
|
#define BCMXCP_METER_MAP_BATTERY_TEMPERATURE 77 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VOLTS_A 78 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VOLTS_B 79 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VOLTS_C 80 /* mapped */
|
|
#define BCMXCP_METER_MAP_NEUTRAL_CURRENT 81
|
|
#define BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_A 82 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_B 83 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_C 84 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_A_B_C_BAR_CHART 85 /* mapped */
|
|
#define BCMXCP_METER_MAP_RECTIFIER_DC_CURRENT 86
|
|
#define BCMXCP_METER_MAP_POSITIVE_BATTERY_VOLTAGE 87
|
|
#define BCMXCP_METER_MAP_NEGATIVE_BATTERY_VOLTAGE 88
|
|
#define BCMXCP_METER_MAP_POSITIVE_BATTERY_CURRENT 89
|
|
#define BCMXCP_METER_MAP_NEGATIVE_BATTERY_CURRENT 90
|
|
#define BCMXCP_METER_MAP_LINE_EVENT_COUNTER 91 /* mapped */
|
|
#define BCMXCP_METER_MAP_OUTPUT_V1_PERCENT 92
|
|
#define BCMXCP_METER_MAP_OUTPUT_V2_PERCENT 93
|
|
#define BCMXCP_METER_MAP_OUTPUT_V3_PERCENT 94
|
|
#define BCMXCP_METER_MAP_OUTPUT_I1_PERCENT 95
|
|
#define BCMXCP_METER_MAP_OUTPUT_I2_PERCENT 96
|
|
#define BCMXCP_METER_MAP_OUTPUT_I3_PERCENT 97
|
|
#define BCMXCP_METER_MAP_INPUT_V1_PERCENT 98
|
|
#define BCMXCP_METER_MAP_INPUT_V2_PERCENT 99
|
|
#define BCMXCP_METER_MAP_INPUT_V3_PERCENT 100
|
|
#define BCMXCP_METER_MAP_INPUT_I1_PERCENT 101
|
|
#define BCMXCP_METER_MAP_INPUT_I2_PERCENT 102
|
|
#define BCMXCP_METER_MAP_INPUT_I3_PERCENT 103
|
|
#define BCMXCP_METER_MAP_GROUND_CURRENT 104
|
|
#define BCMXCP_METER_MAP_OUTPUT_CREST_FACTOR_L1 105
|
|
#define BCMXCP_METER_MAP_OUTPUT_CREST_FACTOR_L2 106
|
|
#define BCMXCP_METER_MAP_OUTPUT_CREST_FACTOR_L3 107
|
|
#define BCMXCP_METER_MAP_OUTPUT_KW_HOUR 108
|
|
#define BCMXCP_METER_MAP_INPUT_VOLTAGE_THD_LINE1 109
|
|
#define BCMXCP_METER_MAP_INPUT_VOLTAGE_THD_LINE2 110
|
|
#define BCMXCP_METER_MAP_INPUT_VOLTAGE_THD_LINE3 111
|
|
#define BCMXCP_METER_MAP_INPUT_CURRENT_THD_LINE1 112
|
|
#define BCMXCP_METER_MAP_INPUT_CURRENT_THD_LINE2 113
|
|
#define BCMXCP_METER_MAP_INPUT_CURRENT_THD_LINE3 114
|
|
#define BCMXCP_METER_MAP_OUTPUT_VOLTAGE_THD_LINE1 115
|
|
#define BCMXCP_METER_MAP_OUTPUT_VOLTAGE_THD_LINE2 116
|
|
#define BCMXCP_METER_MAP_OUTPUT_VOLTAGE_THD_LINE3 117
|
|
#define BCMXCP_METER_MAP_OUTPUT_CURRENT_THD_LINE1 118
|
|
#define BCMXCP_METER_MAP_OUTPUT_CURRENT_THD_LINE2 119
|
|
#define BCMXCP_METER_MAP_OUTPUT_CURRENT_THD_LINE3 120
|
|
#define BCMXCP_METER_MAP_INPUT_CREST_FACTOR_L1 121
|
|
#define BCMXCP_METER_MAP_INPUT_CREST_FACTOR_L2 122
|
|
#define BCMXCP_METER_MAP_INPUT_CREST_FACTOR_L3 123
|
|
#define BCMXCP_METER_MAP_INPUT_KW_HOUR 124
|
|
#define BCMXCP_METER_MAP_BATTERY_LIFE_REMAINING 125
|
|
#define BCMXCP_METER_MAP_SECONDARY_NEUTRAL_CURRENT 126
|
|
#define BCMXCP_METER_MAP_SECONDARY_GROUND_CURRENT 127
|
|
#define BCMXCP_METER_MAP_HOURS_OF_OPERATION 128
|
|
|
|
/* Indexes for alarm map */
|
|
#define BCMXCP_ALARM_INVERTER_AC_OVER_VOLTAGE 0
|
|
#define BCMXCP_ALARM_INVERTER_AC_UNDER_VOLTAGE 1
|
|
#define BCMXCP_ALARM_INVERTER_OVER_OR_UNDER_FREQ 2
|
|
#define BCMXCP_ALARM_BYPASS_AC_OVER_VOLTAGE 3
|
|
#define BCMXCP_ALARM_BYPASS_AC_UNDER_VOLTAGE 4
|
|
#define BCMXCP_ALARM_BYPASS_OVER_OR_UNDER_FREQ 5
|
|
#define BCMXCP_ALARM_INPUT_AC_OVER_VOLTAGE 6
|
|
#define BCMXCP_ALARM_INPUT_AC_UNDER_VOLTAGE 7
|
|
#define BCMXCP_ALARM_INPUT_UNDER_OR_OVER_FREQ 8
|
|
#define BCMXCP_ALARM_OUTPUT_OVER_VOLTAGE 9
|
|
#define BCMXCP_ALARM_OUTPUT_UNDER_VOLTAGE 10
|
|
#define BCMXCP_ALARM_OUTPUT_UNDER_OR_OVER_FREQ 11
|
|
#define BCMXCP_ALARM_REMOTE_EMERGENCY_PWR_OFF 12
|
|
#define BCMXCP_ALARM_REMOTE_GO_TO_BYPASS 13
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_6 14
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_5 15
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_4 16
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_3 17
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_2 18
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_1 19
|
|
#define BCMXCP_ALARM_STATIC_SWITCH_OVER_TEMP 20
|
|
#define BCMXCP_ALARM_CHARGER_OVER_TEMP 21
|
|
#define BCMXCP_ALARM_CHARGER_LOGIC_PWR_FAIL 22
|
|
#define BCMXCP_ALARM_CHARGER_OVER_VOLTAGE_OR_CURRENT 23
|
|
#define BCMXCP_ALARM_INVERTER_OVER_TEMP 24
|
|
#define BCMXCP_ALARM_OUTPUT_OVERLOAD 25
|
|
#define BCMXCP_ALARM_RECTIFIER_INPUT_OVER_CURRENT 26
|
|
#define BCMXCP_ALARM_INVERTER_OUTPUT_OVER_CURRENT 27
|
|
#define BCMXCP_ALARM_DC_LINK_OVER_VOLTAGE 28
|
|
#define BCMXCP_ALARM_DC_LINK_UNDER_VOLTAGE 29
|
|
#define BCMXCP_ALARM_RECTIFIER_FAILED 30
|
|
#define BCMXCP_ALARM_INVERTER_FAULT 31
|
|
#define BCMXCP_ALARM_BATTERY_CONNECTOR_FAIL 32
|
|
#define BCMXCP_ALARM_BYPASS_BREAKER_FAIL 33
|
|
#define BCMXCP_ALARM_CHARGER_FAIL 34
|
|
#define BCMXCP_ALARM_RAMP_UP_FAILED 35
|
|
#define BCMXCP_ALARM_STATIC_SWITCH_FAILED 36
|
|
#define BCMXCP_ALARM_ANALOG_AD_REF_FAIL 37
|
|
#define BCMXCP_ALARM_BYPASS_UNCALIBRATED 38
|
|
#define BCMXCP_ALARM_RECTIFIER_UNCALIBRATED 39
|
|
#define BCMXCP_ALARM_OUTPUT_UNCALIBRATED 40
|
|
#define BCMXCP_ALARM_INVERTER_UNCALIBRATED 41
|
|
#define BCMXCP_ALARM_DC_VOLT_UNCALIBRATED 42
|
|
#define BCMXCP_ALARM_OUTPUT_CURRENT_UNCALIBRATED 43
|
|
#define BCMXCP_ALARM_RECTIFIER_CURRENT_UNCALIBRATED 44
|
|
#define BCMXCP_ALARM_BATTERY_CURRENT_UNCALIBRATED 45
|
|
#define BCMXCP_ALARM_INVERTER_ON_OFF_STAT_FAIL 46
|
|
#define BCMXCP_ALARM_BATTERY_CURRENT_LIMIT 47
|
|
#define BCMXCP_ALARM_INVERTER_STARTUP_FAIL 48
|
|
#define BCMXCP_ALARM_ANALOG_BOARD_AD_STAT_FAIL 49
|
|
#define BCMXCP_ALARM_OUTPUT_CURRENT_OVER_100 50
|
|
#define BCMXCP_ALARM_BATTERY_GROUND_FAULT 51
|
|
#define BCMXCP_ALARM_WAITING_FOR_CHARGER_SYNC 52
|
|
#define BCMXCP_ALARM_NV_RAM_FAIL 53
|
|
#define BCMXCP_ALARM_ANALOG_BOARD_AD_TIMEOUT 54
|
|
#define BCMXCP_ALARM_SHUTDOWN_IMMINENT 55
|
|
#define BCMXCP_ALARM_BATTERY_LOW 56
|
|
#define BCMXCP_ALARM_UTILITY_FAIL 57
|
|
#define BCMXCP_ALARM_OUTPUT_SHORT_CIRCUIT 58
|
|
#define BCMXCP_ALARM_UTILITY_NOT_PRESENT 59
|
|
#define BCMXCP_ALARM_FULL_TIME_CHARGING 60
|
|
#define BCMXCP_ALARM_FAST_BYPASS_COMMAND 61
|
|
#define BCMXCP_ALARM_AD_ERROR 62
|
|
#define BCMXCP_ALARM_INTERNAL_COM_FAIL 63
|
|
#define BCMXCP_ALARM_RECTIFIER_SELFTEST_FAIL 64
|
|
#define BCMXCP_ALARM_RECTIFIER_EEPROM_FAIL 65
|
|
#define BCMXCP_ALARM_RECTIFIER_EPROM_FAIL 66
|
|
#define BCMXCP_ALARM_INPUT_LINE_VOLTAGE_LOSS 67
|
|
#define BCMXCP_ALARM_BATTERY_DC_OVER_VOLTAGE 68
|
|
#define BCMXCP_ALARM_POWER_SUPPLY_OVER_TEMP 69
|
|
#define BCMXCP_ALARM_POWER_SUPPLY_FAIL 70
|
|
#define BCMXCP_ALARM_POWER_SUPPLY_5V_FAIL 71
|
|
#define BCMXCP_ALARM_POWER_SUPPLY_12V_FAIL 72
|
|
#define BCMXCP_ALARM_HEATSINK_OVER_TEMP 73
|
|
#define BCMXCP_ALARM_HEATSINK_TEMP_SENSOR_FAIL 74
|
|
#define BCMXCP_ALARM_RECTIFIER_CURRENT_OVER_125 75
|
|
#define BCMXCP_ALARM_RECTIFIER_FAULT_INTERRUPT_FAIL 76
|
|
#define BCMXCP_ALARM_RECTIFIER_POWER_CAPASITOR_FAIL 77
|
|
#define BCMXCP_ALARM_INVERTER_PROGRAM_STACK_ERROR 78
|
|
#define BCMXCP_ALARM_INVERTER_BOARD_SELFTEST_FAIL 79
|
|
#define BCMXCP_ALARM_INVERTER_AD_SELFTEST_FAIL 80
|
|
#define BCMXCP_ALARM_INVERTER_RAM_SELFTEST_FAIL 81
|
|
#define BCMXCP_ALARM_NV_MEMORY_CHECKSUM_FAIL 82
|
|
#define BCMXCP_ALARM_PROGRAM_CHECKSUM_FAIL 83
|
|
#define BCMXCP_ALARM_INVERTER_CPU_SELFTEST_FAIL 84
|
|
#define BCMXCP_ALARM_NETWORK_NOT_RESPONDING 85
|
|
#define BCMXCP_ALARM_FRONT_PANEL_SELFTEST_FAIL 86
|
|
#define BCMXCP_ALARM_NODE_EEPROM_VERIFICATION_ERROR 87
|
|
#define BCMXCP_ALARM_OUTPUT_AC_OVER_VOLT_TEST_FAIL 88
|
|
#define BCMXCP_ALARM_OUTPUT_DC_OVER_VOLTAGE 89
|
|
#define BCMXCP_ALARM_INPUT_PHASE_ROTATION_ERROR 90
|
|
#define BCMXCP_ALARM_INVERTER_RAMP_UP_TEST_FAILED 91
|
|
#define BCMXCP_ALARM_INVERTER_OFF_COMMAND 92
|
|
#define BCMXCP_ALARM_INVERTER_ON_COMMAND 93
|
|
#define BCMXCP_ALARM_TO_BYPASS_COMMAND 94
|
|
#define BCMXCP_ALARM_FROM_BYPASS_COMMAND 95
|
|
#define BCMXCP_ALARM_AUTO_MODE_COMMAND 96
|
|
#define BCMXCP_ALARM_EMERGENCY_SHUTDOWN_COMMAND 97
|
|
#define BCMXCP_ALARM_SETUP_SWITCH_OPEN 98
|
|
#define BCMXCP_ALARM_INVERTER_OVER_VOLT_INT 99
|
|
#define BCMXCP_ALARM_INVERTER_UNDER_VOLT_INT 100
|
|
#define BCMXCP_ALARM_ABSOLUTE_DCOV_ACOV 101
|
|
#define BCMXCP_ALARM_PHASE_A_CURRENT_LIMIT 102
|
|
#define BCMXCP_ALARM_PHASE_B_CURRENT_LIMIT 103
|
|
#define BCMXCP_ALARM_PHASE_C_CURRENT_LIMIT 104
|
|
#define BCMXCP_ALARM_BYPASS_NOT_AVAILABLE 105
|
|
#define BCMXCP_ALARM_RECTIFIER_BREAKER_OPEN 106
|
|
#define BCMXCP_ALARM_BATTERY_CONTACTOR_OPEN 107
|
|
#define BCMXCP_ALARM_INVERTER_CONTACTOR_OPEN 108
|
|
#define BCMXCP_ALARM_BYPASS_BREAKER_OPEN 109
|
|
#define BCMXCP_ALARM_INV_BOARD_ACOV_INT_TEST_FAIL 110
|
|
#define BCMXCP_ALARM_INVERTER_OVER_TEMP_TRIP 111
|
|
#define BCMXCP_ALARM_INV_BOARD_ACUV_INT_TEST_FAIL 112
|
|
#define BCMXCP_ALARM_INVERTER_VOLTAGE_FEEDBACK_ERROR 113
|
|
#define BCMXCP_ALARM_DC_UNDER_VOLTAGE_TIMEOUT 114
|
|
#define BCMXCP_ALARM_AC_UNDER_VOLTAGE_TIMEOUT 115
|
|
#define BCMXCP_ALARM_DC_UNDER_VOLTAGE_WHILE_CHARGE 116
|
|
#define BCMXCP_ALARM_INVERTER_VOLTAGE_BIAS_ERROR 117
|
|
#define BCMXCP_ALARM_RECTIFIER_PHASE_ROTATION 118
|
|
#define BCMXCP_ALARM_BYPASS_PHASER_ROTATION 119
|
|
#define BCMXCP_ALARM_SYSTEM_INTERFACE_BOARD_FAIL 120
|
|
#define BCMXCP_ALARM_PARALLEL_BOARD_FAIL 121
|
|
#define BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_A 122
|
|
#define BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_B 123
|
|
#define BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_C 124
|
|
#define BCMXCP_ALARM_DC_OVER_VOLTAGE_TIMEOUT 125
|
|
#define BCMXCP_ALARM_BATTERY_TOTALLY_DISCHARGED 126
|
|
#define BCMXCP_ALARM_INVERTER_PHASE_BIAS_ERROR 127
|
|
#define BCMXCP_ALARM_INVERTER_VOLTAGE_BIAS_ERROR_2 128
|
|
#define BCMXCP_ALARM_DC_LINK_BLEED_COMPLETE 129
|
|
#define BCMXCP_ALARM_LARGE_CHARGER_INPUT_CURRENT 130
|
|
#define BCMXCP_ALARM_INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL 131
|
|
#define BCMXCP_ALARM_LOSS_OF_REDUNDANCY 132
|
|
#define BCMXCP_ALARM_LOSS_OF_SYNC_BUS 133
|
|
#define BCMXCP_ALARM_RECTIFIER_BREAKER_SHUNT_TRIP 134
|
|
#define BCMXCP_ALARM_LOSS_OF_CHARGER_SYNC 135
|
|
#define BCMXCP_ALARM_INVERTER_LOW_LEVEL_TEST_TIMEOUT 136
|
|
#define BCMXCP_ALARM_OUTPUT_BREAKER_OPEN 137
|
|
#define BCMXCP_ALARM_CONTROL_POWER_ON 138
|
|
#define BCMXCP_ALARM_INVERTER_ON 139
|
|
#define BCMXCP_ALARM_CHARGER_ON 140
|
|
#define BCMXCP_ALARM_BYPASS_ON 141
|
|
#define BCMXCP_ALARM_BYPASS_POWER_LOSS 142
|
|
#define BCMXCP_ALARM_ON_MANUAL_BYPASS 143
|
|
#define BCMXCP_ALARM_BYPASS_MANUAL_TURN_OFF 144
|
|
#define BCMXCP_ALARM_INVERTER_BLEEDING_DC_LINK_VOLT 145
|
|
#define BCMXCP_ALARM_CPU_ISR_ERROR 146
|
|
#define BCMXCP_ALARM_SYSTEM_ISR_RESTART 147
|
|
#define BCMXCP_ALARM_PARALLEL_DC 148
|
|
#define BCMXCP_ALARM_BATTERY_NEEDS_SERVICE 149
|
|
#define BCMXCP_ALARM_BATTERY_CHARGING 150
|
|
#define BCMXCP_ALARM_BATTERY_NOT_CHARGED 151
|
|
#define BCMXCP_ALARM_DISABLED_BATTERY_TIME 152
|
|
#define BCMXCP_ALARM_SERIES_7000_ENABLE 153
|
|
#define BCMXCP_ALARM_OTHER_UPS_ON 154
|
|
#define BCMXCP_ALARM_PARALLEL_INVERTER 155
|
|
#define BCMXCP_ALARM_UPS_IN_PARALLEL 156
|
|
#define BCMXCP_ALARM_OUTPUT_BREAKER_REALY_FAIL 157
|
|
#define BCMXCP_ALARM_CONTROL_POWER_OFF 158
|
|
#define BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_A 159
|
|
#define BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_B 160
|
|
#define BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_C 161
|
|
#define BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_A 162
|
|
#define BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_B 163
|
|
#define BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_C 164
|
|
#define BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_A 165
|
|
#define BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_B 166
|
|
#define BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_C 167
|
|
#define BCMXCP_ALARM_UPS_ON_BATTERY 168
|
|
#define BCMXCP_ALARM_UPS_ON_BYPASS 169
|
|
#define BCMXCP_ALARM_LOAD_DUMPED 170
|
|
#define BCMXCP_ALARM_LOAD_ON_INVERTER 171
|
|
#define BCMXCP_ALARM_UPS_ON_COMMAND 172
|
|
#define BCMXCP_ALARM_UPS_OFF_COMMAND 173
|
|
#define BCMXCP_ALARM_LOW_BATTERY_SHUTDOWN 174
|
|
#define BCMXCP_ALARM_AUTO_ON_ENABLED 175
|
|
#define BCMXCP_ALARM_SOFTWARE_INCOMPABILITY_DETECTED 176
|
|
#define BCMXCP_ALARM_INVERTER_TEMP_SENSOR_FAILED 177
|
|
#define BCMXCP_ALARM_DC_START_OCCURED 178
|
|
#define BCMXCP_ALARM_IN_PARALLEL_OPERATION 179
|
|
#define BCMXCP_ALARM_SYNCING_TO_BYPASS 180
|
|
#define BCMXCP_ALARM_RAMPING_UPS_UP 181
|
|
#define BCMXCP_ALARM_INVERTER_ON_DELAY 182
|
|
#define BCMXCP_ALARM_CHARGER_ON_DELAY 183
|
|
#define BCMXCP_ALARM_WAITING_FOR_UTIL_INPUT 184
|
|
#define BCMXCP_ALARM_CLOSE_BYPASS_BREAKER 185
|
|
#define BCMXCP_ALARM_TEMPORARY_BYPASS_OPERATION 186
|
|
#define BCMXCP_ALARM_SYNCING_TO_OUTPUT 187
|
|
#define BCMXCP_ALARM_BYPASS_FAILURE 188
|
|
#define BCMXCP_ALARM_AUTO_OFF_COMMAND_EXECUTED 189
|
|
#define BCMXCP_ALARM_AUTO_ON_COMMAND_EXECUTED 190
|
|
#define BCMXCP_ALARM_BATTERY_TEST_FAILED 191
|
|
#define BCMXCP_ALARM_FUSE_FAIL 192
|
|
#define BCMXCP_ALARM_FAN_FAIL 193
|
|
#define BCMXCP_ALARM_SITE_WIRING_FAULT 194
|
|
#define BCMXCP_ALARM_BACKFEED_CONTACTOR_FAIL 195
|
|
#define BCMXCP_ALARM_ON_BUCK 196
|
|
#define BCMXCP_ALARM_ON_BOOST 197
|
|
#define BCMXCP_ALARM_ON_DOUBLE_BOOST 198
|
|
#define BCMXCP_ALARM_BATTERIES_DISCONNECTED 199
|
|
#define BCMXCP_ALARM_UPS_CABINET_OVER_TEMP 200
|
|
#define BCMXCP_ALARM_TRANSFORMER_OVER_TEMP 201
|
|
#define BCMXCP_ALARM_AMBIENT_UNDER_TEMP 202
|
|
#define BCMXCP_ALARM_AMBIENT_OVER_TEMP 203
|
|
#define BCMXCP_ALARM_CABINET_DOOR_OPEN 204
|
|
#define BCMXCP_ALARM_CABINET_DOOR_OPEN_VOLT_PRESENT 205
|
|
#define BCMXCP_ALARM_AUTO_SHUTDOWN_PENDING 206
|
|
#define BCMXCP_ALARM_TAP_SWITCHING_REALY_PENDING 207
|
|
#define BCMXCP_ALARM_UNABLE_TO_CHARGE_BATTERIES 208
|
|
#define BCMXCP_ALARM_STARTUP_FAILURE_CHECK_EPO 209
|
|
#define BCMXCP_ALARM_AUTOMATIC_STARTUP_PENDING 210
|
|
#define BCMXCP_ALARM_MODEM_FAILED 211
|
|
#define BCMXCP_ALARM_INCOMING_MODEM_CALL_STARTED 212
|
|
#define BCMXCP_ALARM_OUTGOING_MODEM_CALL_STARTED 213
|
|
#define BCMXCP_ALARM_MODEM_CONNECTION_ESTABLISHED 214
|
|
#define BCMXCP_ALARM_MODEM_CALL_COMPLETED_SUCCESS 215
|
|
#define BCMXCP_ALARM_MODEM_CALL_COMPLETED_FAIL 216
|
|
#define BCMXCP_ALARM_INPUT_BREAKER_FAIL 217
|
|
#define BCMXCP_ALARM_SYSINIT_IN_PROGRESS 218
|
|
#define BCMXCP_ALARM_AUTOCALIBRATION_FAIL 219
|
|
#define BCMXCP_ALARM_SELECTIVE_TRIP_OF_MODULE 220
|
|
#define BCMXCP_ALARM_INVERTER_OUTPUT_FAILURE 221
|
|
#define BCMXCP_ALARM_ABNORMAL_OUTPUT_VOLT_AT_STARTUP 222
|
|
#define BCMXCP_ALARM_RECTIFIER_OVER_TEMP 223
|
|
#define BCMXCP_ALARM_CONFIG_ERROR 224
|
|
#define BCMXCP_ALARM_REDUNDANCY_LOSS_DUE_TO_OVERLOAD 225
|
|
#define BCMXCP_ALARM_ON_ALTERNATE_AC_SOURCE 226
|
|
#define BCMXCP_ALARM_IN_HIGH_EFFICIENCY_MODE 227
|
|
#define BCMXCP_ALARM_SYSTEM_NOTICE_ACTIVE 228
|
|
#define BCMXCP_ALARM_SYSTEM_ALARM_ACTIVE 229
|
|
#define BCMXCP_ALARM_ALTERNATE_POWER_SOURCE_NOT_AVAILABLE 230
|
|
#define BCMXCP_ALARM_CURRENT_BALANCE_FAILURE 231
|
|
#define BCMXCP_ALARM_CHECK_AIR_FILTER 232
|
|
#define BCMXCP_ALARM_SUBSYSTEM_NOTICE_ACTIVE 233
|
|
#define BCMXCP_ALARM_SUBSYSTEM_ALARM_ACTIVE 234
|
|
#define BCMXCP_ALARM_CHARGER_ON_COMMAND 235
|
|
#define BCMXCP_ALARM_CHARGER_OFF_COMMAND 236
|
|
#define BCMXCP_ALARM_UPS_NORMAL 237
|
|
#define BCMXCP_ALARM_INVERTER_PHASE_ROTATION 238
|
|
#define BCMXCP_ALARM_UPS_OFF 239
|
|
#define BCMXCP_ALARM_EXTERNAL_COMMUNICATION_FAILURE 240
|
|
#define BCMXCP_ALARM_BATTERY_TEST_INPROGRESS 256
|
|
#define BCMXCP_ALARM_SYSTEM_TEST_INPROGRESS 257
|
|
#define BCMXCP_ALARM_BATTERY_TEST_ABORTED 258
|
|
|
|
#define BCMXCP_COMMAND_MAP_MAX 208 /* Max no of entries in BCM/XCP meter map (adjusted upwards to nearest multi of 8) */
|
|
#define BCMXCP_METER_MAP_MAX 136 /* Max no of entries in BCM/XCP meter map (adjusted upwards to nearest multi of 8) */
|
|
#define BCMXCP_ALARM_MAP_MAX 264 /* Max no of entries in BCM/XCP alarm map (adjusted upwards to nearest multi of 8) */
|
|
|
|
/* Return codes for XCP ACK block responses */
|
|
#define BCMXCP_RETURN_ACCEPTED 0x31 /* Accepted and executed (or execution in progress) */
|
|
#define BCMXCP_RETURN_NOT_IMPLEMENTED 0x32 /* Recognized but not implemented */
|
|
#define BCMXCP_RETURN_BUSY 0x33 /* Recognized but not currently able to execute (busy) */
|
|
#define BCMXCP_RETURN_UNRECOGNISED 0x34 /* Unrecognized -- e.g., command byte not in valid range, or command has been corrupted (bad checksum) */
|
|
#define BCMXCP_RETURN_PARAMETER_OUT_OF_RANGE 0x35 /* Command recognized, but its Parameter value is out of range */
|
|
#define BCMXCP_RETURN_INVALID_PARAMETER 0x36 /* Command recognized, but its Parameter is invalid (e.g., no such parameter, bad Outlet number) */
|
|
#define BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST 0x37 /* Accepted, with parameter adjusted to nearest good value */
|
|
/*#define BCMXCP_RETURN_READONLY 0x38 */ /* Parameter is Read-only - cannot be written (at this privilege level) (this is not listed in spec document */
|
|
|
|
/* UPS status */
|
|
#define BCMXCP_STATUS_ONLINE 0x50
|
|
#define BCMXCP_STATUS_ONBATTERY 0xf0
|
|
#define BCMXCP_STATUS_OVERLOAD 0xe0
|
|
#define BCMXCP_STATUS_TRIM 0x63
|
|
#define BCMXCP_STATUS_BOOST1 0x61
|
|
#define BCMXCP_STATUS_BOOST2 0x62
|
|
#define BCMXCP_STATUS_BYPASS 0x60
|
|
#define BCMXCP_STATUS_OFF 0x10
|
|
|
|
/* UPS topology block info */
|
|
#define BCMXCP_TOPOLOGY_NONE 0x0000 /* None; use the Table of Elements */
|
|
#define BCMXCP_TOPOLOGY_OFFLINE_SWITCHER_1P 0x0010 /* Off-line switcher, Single Phase */
|
|
#define BCMXCP_TOPOLOGY_LINEINT_UPS_1P 0x0020 /* Line-Interactive UPS, Single Phase */
|
|
#define BCMXCP_TOPOLOGY_LINEINT_UPS_2P 0x0021 /* Line-Interactive UPS, Two Phase */
|
|
#define BCMXCP_TOPOLOGY_LINEINT_UPS_3P 0x0022 /* Line-Interactive UPS, Three Phase */
|
|
#define BCMXCP_TOPOLOGY_DUAL_AC_ONLINE_UPS_1P 0x0030 /* Dual AC Input, On-Line UPS, Single Phase */
|
|
#define BCMXCP_TOPOLOGY_DUAL_AC_ONLINE_UPS_2P 0x0031 /* Dual AC Input, On-Line UPS, Two Phase */
|
|
#define BCMXCP_TOPOLOGY_DUAL_AC_ONLINE_UPS_3P 0x0032 /* Dual AC Input, On-Line UPS, Three Phase */
|
|
#define BCMXCP_TOPOLOGY_ONLINE_UPS_1P 0x0040 /* On-Line UPS, Single Phase */
|
|
#define BCMXCP_TOPOLOGY_ONLINE_UPS_2P 0x0041 /* On-Line UPS, Two Phase */
|
|
#define BCMXCP_TOPOLOGY_ONLINE_UPS_3P 0x0042 /* On-Line UPS, Three Phase */
|
|
#define BCMXCP_TOPOLOGY_PARA_REDUND_ONLINE_UPS_1P 0x0050 /* Parallel Redundant On-Line UPS, Single Phase */
|
|
#define BCMXCP_TOPOLOGY_PARA_REDUND_ONLINE_UPS_2P 0x0051 /* Parallel Redundant On-Line UPS, Two Phase */
|
|
#define BCMXCP_TOPOLOGY_PARA_REDUND_ONLINE_UPS_3P 0x0052 /* Parallel Redundant On-Line UPS, Three Phase */
|
|
#define BCMXCP_TOPOLOGY_PARA_CAPACITY_ONLINE_UPS_1P 0x0060 /* Parallel for Capacity On-Line UPS, Single Phase */
|
|
#define BCMXCP_TOPOLOGY_PARA_CAPACITY_ONLINE_UPS_2P 0x0061 /* Parallel for Capacity On-Line UPS, Two Phase */
|
|
#define BCMXCP_TOPOLOGY_PARA_CAPACITY_ONLINE_UPS_3P 0x0062 /* Parallel for Capacity On-Line UPS, Three Phase */
|
|
#define BCMXCP_TOPOLOGY_SYSTEM_BYPASS_MODULE_3P 0x0102 /* System Bypass Module, Three Phase */
|
|
#define BCMXCP_TOPOLOGY_HOT_TIE_CABINET_3P 0x0122 /* Hot-Tie Cabinet, Three Phase */
|
|
#define BCMXCP_TOPOLOGY_OUTLET_CONTROLLER_1P 0x0200 /* Outlet Controller, Single Phase */
|
|
#define BCMXCP_TOPOLOGY_DUAL_AC_STATIC_SWITCH_3P 0x0222 /* Dual AC Input Static Switch Module, 3 Phase */
|
|
|
|
typedef struct { /* Entry in BCM/XCP - UPS mapping table */
|
|
const char *command_desc; /* Description of this command */
|
|
unsigned char command_byte; /* The command byte for this command, 0 = not supported */
|
|
} BCMXCP_COMMAND_MAP_ENTRY_t;
|
|
|
|
extern BCMXCP_COMMAND_MAP_ENTRY_t bcmxcp_command_map[BCMXCP_COMMAND_MAP_MAX];
|
|
|
|
typedef struct { /* Entry in BCM/XCP - UPS - NUT mapping table */
|
|
const char *nut_entity; /* The NUT variable name */
|
|
unsigned char format; /* The format of the data - float, long etc */
|
|
unsigned int meter_block_index; /* The position of this meter in the UPS meter block */
|
|
} BCMXCP_METER_MAP_ENTRY_t;
|
|
|
|
extern BCMXCP_METER_MAP_ENTRY_t bcmxcp_meter_map[BCMXCP_METER_MAP_MAX];
|
|
|
|
typedef struct { /* Entry in BCM/XCP - UPS mapping table */
|
|
int alarm_block_index; /* Index of this alarm in alarm block. -1 = not existing */
|
|
const char *alarm_desc; /* Description of this alarm */
|
|
} BCMXCP_ALARM_MAP_ENTRY_t;
|
|
|
|
extern BCMXCP_ALARM_MAP_ENTRY_t bcmxcp_alarm_map[BCMXCP_ALARM_MAP_MAX];
|
|
|
|
typedef struct { /* A place to store status info and other data not for NUT */
|
|
unsigned char topology_mask; /* Configuration block byte 16, masks valid status bits */
|
|
unsigned int lowbatt; /* Seconds of runtime left left when LB alarm is set */
|
|
unsigned int shutdowndelay; /* Shutdown delay in seconds, from ups.conf */
|
|
int alarm_on_battery; /* On Battery alarm active? */
|
|
int alarm_low_battery; /* Battery Low alarm active? */
|
|
int alarm_replace_battery; /* Battery needs replacement! */
|
|
} BCMXCP_STATUS_t;
|
|
|
|
extern BCMXCP_STATUS_t bcmxcp_status;
|
|
|
|
int checksum_test(const unsigned char*);
|
|
unsigned char calc_checksum(const unsigned char *buf);
|
|
|
|
/* from usbhid-ups.h */
|
|
typedef struct {
|
|
const long xcp_value; /* XCP value */
|
|
const char *nut_value; /* NUT value */
|
|
const char *(*fun)(double xcp_value); /* optional XCP to NUT mapping */
|
|
double (*nuf)(const char *nut_value); /* optional NUT to HID mapping */
|
|
} info_lkp_t;
|
|
|
|
/* use explicit booleans */
|
|
#ifndef FALSE
|
|
typedef enum ebool { FALSE, TRUE } bool_t;
|
|
#else
|
|
typedef int bool_t;
|
|
#endif
|
|
|
|
#endif /*_POWERWARE_H */
|
|
|