nut-debian/docs/man/microsol-apc.txt
2022-07-10 09:23:45 +02:00

74 lines
1.7 KiB
Plaintext

MICROSOL-APC(8)
===============
NAME
----
microsol-apc - Driver for APC Back-UPS BR UPS equipment
NOTE
----
This man page only documents the hardware-specific features of the
microsol-apc driver. For information about the core driver, see
linkman:nutupsdrv[8].
SUPPORTED HARDWARE
------------------
This driver supports the following UPS models:
* APC Back-UPS BZ1500-BR
* APC Back-UPS BZ2200I-BR
* APC Back-UPS BZ2200BI-BR
In 2009, Schneider Electric acquired Microsol Technologies, and by 2012, the
entire Microsol line was being sold under the APC brand. This driver supports
these newer, APC-branded models. Older equipment should use linkman:solis[8].
EXTRA ARGUMENTS
---------------
This driver support the following extra optional settings in the
linkman:ups.conf[5].
*battext = n* - (default = 0, no extra battery, where n = Ampere*hour )
*prgshut = 1* - (default = 0, no programmable shutdown )
COMMANDS
--------
* shutdown.return - Shut down in .3 minutes and restart in .3 minutes
* shutdown.stayoff - Shut down in .3 minutes and do not return
ISSUES
------
For other APC-Microsol models, the reported voltages, currents and power will
be incorrect, as the communication protocol reports unprocessed data instead of
real values, needing model-specific post-processing by the driver. Monitoring
of UPS state (on-battery/on-line, critical battery) should work for other
models, but is untested.
AUTHORS
-------
* Ygor A. S. Regados <ygorre@tutanota.com>
* Roberto P. Velloso <rvelloso@gmail.com>
* Silvino B. Magalhães <sbm2yk@gmail.com>
SEE ALSO
--------
The core driver:
~~~~~~~~~~~~~~~~
linkman:nutupsdrv[8]
Internet resources:
~~~~~~~~~~~~~~~~~~~
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/