nut-debian/scripts/augeas/nutupsconf.aug.in
2013-11-24 16:00:12 +01:00

194 lines
5.7 KiB
Plaintext

(*
Module: NutUpsConf
Parses @CONFPATH@/ups.conf
Author: Raphael Pinson <raphink@gmail.com>
Frederic Bohe <fredericbohe@eaton.com>
Arnaud Quette <arnaud.quette@gmail.com>
About: License
This file is licensed under the GPL.
About: Lens Usage
Sample usage of this lens in augtool
* Print all drivers used
> print /files/@CONFPATH@/ups.conf/*/driver
About: Configuration files
This lens applies to @CONFPATH@/ups.conf. See <filter>.
*)
module NutUpsConf =
autoload ups_xfm
(************************************************************************
* Group: UPS.CONF
*************************************************************************)
let ups_comment = IniFile.comment IniFile.comment_re IniFile.comment_default
let ups_sep = IniFile.sep IniFile.sep_re IniFile.sep_default
let ups_global = "chroot"
| "driverpath"
| "maxstartdelay"
| "pollinterval"
| "user"
let ups_fields = "driver"
| "port"
| "sdorder"
| "desc"
| "nolock"
| "maxstartdelay"
| "CP"
| "CS"
| "ID"
| "LB"
| "LowBatt"
| "OL"
| "OffDelay"
| "OnDelay"
| "SD"
| "advanced_eco_mode"
| "advorder"
| "alarm_control"
| "authPassword"
| "authProtocol"
| "authtype"
| "awd"
| "batteryPercentage"
| "battery_alarm"
| "battery_number"
| "battery_open_status_check"
| "battext"
| "battvoltmult"
| "baud_rate"
| "baudrate"
| "bus"
| "bypass_alarm"
| "bypass_forbidding"
| "bypass_when_off"
| "cable"
| "cablepower"
| "chargetime"
| "community"
| "constant_phase_angle"
| "converter_mode"
| "daysoff"
| "daysweek"
| "dumbterm"
| "eco_mode"
| "explore"
| "fake_lowbatt"
| "flash"
| "frequency"
| "fruid"
| "full_update"
| "houroff"
| "houron"
| "idleload"
| "input_timeout"
| "langid_fix"
| "limited_runtime_on_battery"
| "linevoltage"
| "load.off"
| "load.on"
| "load.status"
| "loadPercentage"
| "login"
| "lowbatt"
| "manufacturer"
| "max_bypass_freq"
| "max_bypass_volt"
| "max_load"
| "maxreport"
| "methodOfFlowControl"
| "mfr"
| "mibs"
| "min_bypass_freq"
| "min_bypass_volt"
| "mincharge"
| "minruntime"
| "model"
| "modelname"
| "nohang"
| "nombattvolt"
| "norating"
| "notification"
| "notransferoids"
| "novendor"
| "nowarn_noimp"
| "numOfBytesFromUPS"
| "offdelay"
| "oldmac"
| "ondelay"
| "output_pace"
| "output_phase_angle"
| "password"
| "pollfreq"
| "pollonly"
| "powerup"
| "prefix"
| "prgshut"
| "privPassword"
| "privProtocol"
| "product"
| "productid"
| "protocol"
| "rebootdelay"
| "reset_to_default"
| "runtimecal"
| "sdtime"
| "sdtype"
| "secLevel"
| "secName"
| "serial"
| "serialnumber"
| "shutdownArguments"
| "shutdown_delay"
| "shutdown_duration"
| "shutdown_timer"
| "silent"
| "site_fault_detection"
| "snmp_version"
| "startdelay"
| "status_only"
| "stayoff"
| "subdriver"
| "subscribe"
| "testing"
| "testtime"
| "timeout"
| "ttymode"
| "type"
| "ups.delay.shutdown"
| "ups.delay.start"
| "upstype"
| "usd"
| "use_crlf"
| "use_pre_lf"
| "username"
| "validationSequence"
| "vendor"
| "vendorid"
| "voltage"
| "wait"
| "work_range_type"
| "wugrace"
let ups_entry = IniFile.indented_entry (ups_global|ups_fields) ups_sep ups_comment
let ups_title = IniFile.indented_title IniFile.record_re
let ups_record = IniFile.record ups_title ups_entry
let ups_lns = IniFile.lns ups_record ups_comment
let ups_filter = (incl "@CONFPATH@/ups.conf")
. Util.stdexcl
let ups_xfm = transform ups_lns ups_filter