nut-debian/docs/man/tripplite.txt
2011-01-26 10:35:08 +01:00

61 lines
1.6 KiB
Plaintext

TRIPPLITE(8)
============
NAME
----
tripplite - Driver for Tripp-Lite SmartPro UPS equipment
NOTE
----
This man page only documents the hardware-specific features of the
tripplite driver. For information about the core driver, see
linkman:nutupsdrv[8].
SUPPORTED HARDWARE
------------------
This driver should work on the SmartPro line, including the SMART700
and SMART700SER. It only supports SmartPro models that communicate
using the serial port.
EXTRA ARGUMENTS
---------------
This driver supports the following optional settings in the
linkman:ups.conf[5]:
*offdelay*='num'::
Time to wait before the UPS is turned off after the kill power command is
sent. The default value is 64 (in seconds).
*rebootdelay*='num'::
Set the timer before the UPS is cycled after the reboot command is sent.
The default value is 64 (in seconds).
*startdelay*='num'::
Set the time that the UPS waits before it turns itself back on after a
reboot command. The default value is 60 (in seconds).
KNOWN ISSUES AND BUGS
---------------------
Battery charge information may not be correct for all UPSes. It is tuned
to be correct for a SMART700SER. Other models may not provide correct
information. Information from the manufacturer would be helpful.
AUTHORS
-------
Rickard E. (Rik) Faith, Nicholas Kain
SEE ALSO
--------
The core driver:
~~~~~~~~~~~~~~~~
linkman:nutupsdrv[8]
Other drivers for Tripp-Lite hardware:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linkman:tripplitesu[8], linkman:tripplite_usb[8], linkman:usbhid-ups[8]
Internet resources:
~~~~~~~~~~~~~~~~~~~
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/