667 lines
14 KiB
Makefile
667 lines
14 KiB
Makefile
# Network UPS Tools: man
|
|
#
|
|
|
|
# Notes:
|
|
# - sources (.txt) and groff formats are both distributed,
|
|
# - only sources are versioned ; groff files are generated at worst
|
|
# during 'make dist'
|
|
# - HTML files are built upon request, if AsciiDoc is available,
|
|
# - groff update will only happen if AsciiDoc is available too,
|
|
# - all this can probably (and hopefully) be improved, but I've not
|
|
# found a way to do pattern replacement on the fly for target deps!
|
|
# FIXME: investigate an autogen.sh hook
|
|
# - Ref: http://www.gnu.org/software/hello/manual/automake/Man-pages.html
|
|
|
|
# Base configuration and client manpages, always installed
|
|
SRC_CONF_PAGES = \
|
|
nut.conf.txt \
|
|
ups.conf.txt \
|
|
upsd.conf.txt \
|
|
upsd.users.txt \
|
|
upsmon.conf.txt \
|
|
upssched.conf.txt
|
|
|
|
MAN_CONF_PAGES = \
|
|
nut.conf.5 \
|
|
ups.conf.5 \
|
|
upsd.conf.5 \
|
|
upsd.users.5 \
|
|
upsmon.conf.5 \
|
|
upssched.conf.5
|
|
|
|
man5_MANS = $(MAN_CONF_PAGES)
|
|
|
|
HTML_CONF_MANS = \
|
|
nut.conf.html \
|
|
ups.conf.html \
|
|
upsd.conf.html \
|
|
upsd.users.html \
|
|
upsmon.conf.html \
|
|
upssched.conf.html
|
|
|
|
SRC_CLIENT_PAGES = \
|
|
nutupsdrv.txt \
|
|
upsc.txt \
|
|
upscmd.txt \
|
|
upsd.txt \
|
|
upsdrvctl.txt \
|
|
upslog.txt \
|
|
upsmon.txt \
|
|
upsrw.txt \
|
|
upssched.txt
|
|
|
|
MAN_CLIENT_PAGES = \
|
|
nutupsdrv.8 \
|
|
upsc.8 \
|
|
upscmd.8 \
|
|
upsd.8 \
|
|
upsdrvctl.8 \
|
|
upslog.8 \
|
|
upsmon.8 \
|
|
upsrw.8 \
|
|
upssched.8
|
|
|
|
man8_MANS = $(MAN_CLIENT_PAGES)
|
|
|
|
HTML_CLIENT_MANS = \
|
|
nutupsdrv.html \
|
|
upsc.html \
|
|
upscmd.html \
|
|
upsd.html \
|
|
upsdrvctl.html \
|
|
upslog.html \
|
|
upsmon.html \
|
|
upsrw.html \
|
|
upssched.html
|
|
|
|
SRC_TOOL_PAGES = nut-scanner.txt nut-recorder.txt
|
|
|
|
MAN_TOOL_PAGES = nut-scanner.8 nut-recorder.8
|
|
|
|
man8_MANS += $(MAN_TOOL_PAGES)
|
|
|
|
HTML_TOOL_MANS = nut-scanner.html nut-recorder.html
|
|
|
|
# CGI (--with-cgi) related manpages
|
|
SRC_CGI_PAGES = \
|
|
hosts.conf.txt \
|
|
upsset.conf.txt \
|
|
upsstats.html.txt \
|
|
upsset.cgi.txt \
|
|
upsstats.cgi.txt \
|
|
upsimage.cgi.txt
|
|
|
|
MAN5_CGI_PAGES = \
|
|
hosts.conf.5 \
|
|
upsset.conf.5 \
|
|
upsstats.html.5
|
|
|
|
MAN8_CGI_PAGES = \
|
|
upsset.cgi.8 \
|
|
upsstats.cgi.8 \
|
|
upsimage.cgi.8
|
|
|
|
if WITH_CGI
|
|
man5_MANS += $(MAN5_CGI_PAGES)
|
|
|
|
man8_MANS += $(MAN8_CGI_PAGES)
|
|
endif
|
|
|
|
HTML_CGI_MANS = \
|
|
hosts.conf.html \
|
|
upsset.conf.html \
|
|
upsstats.html.html \
|
|
upsset.cgi.html \
|
|
upsstats.cgi.html \
|
|
upsimage.cgi.html
|
|
|
|
|
|
# Development (--with-dev) related manpages
|
|
SRC_DEV_PAGES = \
|
|
upsclient.txt \
|
|
upscli_add_host_cert.txt \
|
|
upscli_cleanup.txt \
|
|
upscli_connect.txt \
|
|
upscli_disconnect.txt \
|
|
upscli_fd.txt \
|
|
upscli_get.txt \
|
|
upscli_init.txt \
|
|
upscli_list_next.txt \
|
|
upscli_list_start.txt \
|
|
upscli_readline.txt \
|
|
upscli_sendline.txt \
|
|
upscli_splitaddr.txt \
|
|
upscli_splitname.txt \
|
|
upscli_ssl.txt \
|
|
upscli_strerror.txt \
|
|
upscli_upserror.txt \
|
|
libnutclient.txt \
|
|
libnutclient_commands.txt \
|
|
libnutclient_devices.txt \
|
|
libnutclient_general.txt \
|
|
libnutclient_misc.txt \
|
|
libnutclient_tcp.txt \
|
|
libnutclient_variables.txt \
|
|
nutscan.txt \
|
|
nutscan_scan_snmp.txt \
|
|
nutscan_scan_usb.txt \
|
|
nutscan_scan_xml_http.txt \
|
|
nutscan_scan_nut.txt \
|
|
nutscan_scan_avahi.txt \
|
|
nutscan_scan_ipmi.txt \
|
|
nutscan_scan_eaton_serial.txt \
|
|
nutscan_display_ups_conf.txt \
|
|
nutscan_display_parsable.txt \
|
|
nutscan_cidr_to_ip.txt \
|
|
nutscan_new_device.txt \
|
|
nutscan_free_device.txt \
|
|
nutscan_add_option_to_device.txt \
|
|
nutscan_add_device_to_device.txt \
|
|
nutscan_init.txt \
|
|
nutscan_get_serial_ports_list.txt \
|
|
libupsclient-config.txt \
|
|
skel.txt
|
|
|
|
# NOTE: nutclient_*.3 has no source counterpart (libnutclient_*.txt)
|
|
MAN3_DEV_PAGES = \
|
|
upsclient.3 \
|
|
upscli_add_host_cert.3 \
|
|
upscli_cleanup.3 \
|
|
upscli_connect.3 \
|
|
upscli_disconnect.3 \
|
|
upscli_fd.3 \
|
|
upscli_get.3 \
|
|
upscli_init.3 \
|
|
upscli_list_next.3 \
|
|
upscli_list_start.3 \
|
|
upscli_readline.3 \
|
|
upscli_sendline.3 \
|
|
upscli_splitaddr.3 \
|
|
upscli_splitname.3 \
|
|
upscli_ssl.3 \
|
|
upscli_strerror.3 \
|
|
upscli_upserror.3 \
|
|
libnutclient.3 \
|
|
libnutclient_commands.3 \
|
|
libnutclient_devices.3 \
|
|
libnutclient_general.3 \
|
|
libnutclient_misc.3 \
|
|
libnutclient_tcp.3 \
|
|
libnutclient_variables.3 \
|
|
nutclient_authenticate.3 \
|
|
nutclient_destroy.3 \
|
|
nutclient_device_forced_shutdown.3 \
|
|
nutclient_device_login.3 \
|
|
nutclient_device_master.3 \
|
|
nutclient_execute_device_command.3 \
|
|
nutclient_get_device_command_description.3 \
|
|
nutclient_get_device_commands.3 \
|
|
nutclient_get_device_description.3 \
|
|
nutclient_get_device_num_logins.3 \
|
|
nutclient_get_device_rw_variables.3 \
|
|
nutclient_get_devices.3 \
|
|
nutclient_get_device_variable_description.3 \
|
|
nutclient_get_device_variables.3 \
|
|
nutclient_get_device_variable_values.3 \
|
|
nutclient_has_device.3 \
|
|
nutclient_has_device_command.3 \
|
|
nutclient_has_device_variable.3 \
|
|
nutclient_logout.3 \
|
|
nutclient_set_device_variable_value.3 \
|
|
nutclient_set_device_variable_values.3 \
|
|
nutclient_tcp_create_client.3 \
|
|
nutclient_tcp_disconnect.3 \
|
|
nutclient_tcp_get_timeout.3 \
|
|
nutclient_tcp_is_connected.3 \
|
|
nutclient_tcp_reconnect.3 \
|
|
nutclient_tcp_set_timeout.3 \
|
|
nutscan.3 \
|
|
nutscan_scan_snmp.3 \
|
|
nutscan_scan_usb.3 \
|
|
nutscan_scan_xml_http.3 \
|
|
nutscan_scan_nut.3 \
|
|
nutscan_scan_avahi.3 \
|
|
nutscan_scan_ipmi.3 \
|
|
nutscan_scan_eaton_serial.3 \
|
|
nutscan_display_ups_conf.3 \
|
|
nutscan_display_parsable.3 \
|
|
nutscan_cidr_to_ip.3 \
|
|
nutscan_new_device.3 \
|
|
nutscan_free_device.3 \
|
|
nutscan_add_option_to_device.3 \
|
|
nutscan_add_device_to_device.3 \
|
|
nutscan_get_serial_ports_list.3 \
|
|
nutscan_init.3
|
|
|
|
MAN1_DEV_PAGES = \
|
|
libupsclient-config.1
|
|
|
|
if WITH_DEV
|
|
man3_MANS = $(MAN3_DEV_PAGES)
|
|
|
|
if !WITH_PKG_CONFIG
|
|
man1_MANS = $(MAN1_DEV_PAGES)
|
|
endif
|
|
# WITH_DEV
|
|
endif
|
|
|
|
HTML_DEV_MANS = \
|
|
upsclient.html \
|
|
upscli_add_host_cert.html \
|
|
upscli_cleanup.html \
|
|
upscli_connect.html \
|
|
upscli_disconnect.html \
|
|
upscli_fd.html \
|
|
upscli_get.html \
|
|
upscli_init.html \
|
|
upscli_list_next.html \
|
|
upscli_list_start.html \
|
|
upscli_readline.html \
|
|
upscli_sendline.html \
|
|
upscli_splitaddr.html \
|
|
upscli_splitname.html \
|
|
upscli_ssl.html \
|
|
upscli_strerror.html \
|
|
upscli_upserror.html \
|
|
libnutclient.html \
|
|
libnutclient_commands.html \
|
|
libnutclient_devices.html \
|
|
libnutclient_general.html \
|
|
libnutclient_misc.html \
|
|
libnutclient_tcp.html \
|
|
libnutclient_variables.html \
|
|
nutscan.html \
|
|
nutscan_scan_snmp.html \
|
|
nutscan_scan_usb.html \
|
|
nutscan_scan_xml_http.html \
|
|
nutscan_scan_nut.html \
|
|
nutscan_scan_avahi.html \
|
|
nutscan_scan_ipmi.html \
|
|
nutscan_scan_eaton_serial.html \
|
|
nutscan_display_ups_conf.html \
|
|
nutscan_display_parsable.html \
|
|
nutscan_cidr_to_ip.html \
|
|
nutscan_new_device.html \
|
|
nutscan_free_device.html \
|
|
nutscan_add_option_to_device.html \
|
|
nutscan_add_device_to_device.html \
|
|
nutscan_get_serial_ports_list.html \
|
|
nutscan_init.html \
|
|
libupsclient-config.html \
|
|
skel.html
|
|
|
|
|
|
# Drivers related manpages
|
|
|
|
# (--with-drivers=...)
|
|
if SOME_DRIVERS
|
|
man8_MANS += $(DRIVER_MAN_LIST)
|
|
|
|
else
|
|
|
|
# (--with-serial)
|
|
SRC_SERIAL_PAGES = \
|
|
al175.txt \
|
|
apcsmart.txt \
|
|
apcsmart-old.txt \
|
|
bcmxcp.txt \
|
|
belkin.txt \
|
|
belkinunv.txt \
|
|
bestfortress.txt \
|
|
bestuferrups.txt \
|
|
bestups.txt \
|
|
bestfcom.txt \
|
|
blazer-common.txt \
|
|
blazer_ser.txt \
|
|
clone.txt \
|
|
dummy-ups.txt \
|
|
etapro.txt \
|
|
everups.txt \
|
|
gamatronic.txt \
|
|
genericups.txt \
|
|
isbmex.txt \
|
|
ivtscd.txt \
|
|
liebert.txt \
|
|
liebert-esp2.txt \
|
|
masterguard.txt \
|
|
metasys.txt \
|
|
mge-shut.txt \
|
|
mge-utalk.txt \
|
|
oneac.txt \
|
|
microdowell.txt \
|
|
nutdrv_qx.txt \
|
|
optiups.txt \
|
|
powercom.txt \
|
|
powerpanel.txt \
|
|
rhino.txt \
|
|
riello_ser.txt \
|
|
safenet.txt \
|
|
solis.txt \
|
|
tripplite.txt \
|
|
tripplitesu.txt \
|
|
upscode2.txt \
|
|
victronups.txt \
|
|
apcupsd-ups.txt
|
|
|
|
MAN_SERIAL_PAGES = \
|
|
al175.8 \
|
|
apcsmart.8 \
|
|
apcsmart-old.8 \
|
|
bcmxcp.8 \
|
|
belkin.8 \
|
|
belkinunv.8 \
|
|
bestfortress.8 \
|
|
bestuferrups.8 \
|
|
bestups.8 \
|
|
bestfcom.8 \
|
|
blazer_ser.8 \
|
|
clone.8 \
|
|
dummy-ups.8 \
|
|
etapro.8 \
|
|
everups.8 \
|
|
gamatronic.8 \
|
|
genericups.8 \
|
|
isbmex.8 \
|
|
ivtscd.8 \
|
|
liebert.8 \
|
|
liebert-esp2.8 \
|
|
masterguard.8 \
|
|
metasys.8 \
|
|
mge-shut.8 \
|
|
mge-utalk.8 \
|
|
nutdrv_qx.8 \
|
|
oneac.8 \
|
|
microdowell.8 \
|
|
optiups.8 \
|
|
powercom.8 \
|
|
powerpanel.8 \
|
|
rhino.8 \
|
|
riello_ser.8 \
|
|
safenet.8 \
|
|
solis.8 \
|
|
tripplite.8 \
|
|
tripplitesu.8 \
|
|
upscode2.8 \
|
|
victronups.8 \
|
|
apcupsd-ups.8
|
|
|
|
if WITH_SERIAL
|
|
man8_MANS += $(MAN_SERIAL_PAGES)
|
|
endif
|
|
|
|
HTML_SERIAL_MANS = \
|
|
al175.html \
|
|
apcsmart.html \
|
|
apcsmart-old.html \
|
|
bcmxcp.html \
|
|
belkin.html \
|
|
belkinunv.html \
|
|
bestfortress.html \
|
|
bestuferrups.html \
|
|
bestups.html \
|
|
bestfcom.html \
|
|
blazer_ser.html \
|
|
clone.html \
|
|
dummy-ups.html \
|
|
etapro.html \
|
|
everups.html \
|
|
gamatronic.html \
|
|
genericups.html \
|
|
isbmex.html \
|
|
ivtscd.html \
|
|
liebert.html \
|
|
liebert-esp2.html \
|
|
masterguard.html \
|
|
metasys.html \
|
|
mge-shut.html \
|
|
mge-utalk.html \
|
|
nutdrv_qx.html \
|
|
oneac.html \
|
|
microdowell.html \
|
|
optiups.html \
|
|
powercom.html \
|
|
powerpanel.html \
|
|
rhino.html \
|
|
riello_ser.html \
|
|
safenet.html \
|
|
solis.html \
|
|
tripplite.html \
|
|
tripplitesu.html \
|
|
upscode2.html \
|
|
victronups.html \
|
|
apcupsd-ups.html
|
|
|
|
# (--with-snmp)
|
|
SRC_SNMP_PAGES = snmp-ups.txt
|
|
MAN_SNMP_PAGES = snmp-ups.8
|
|
|
|
if WITH_SNMP
|
|
man8_MANS += $(MAN_SNMP_PAGES)
|
|
endif
|
|
|
|
HTML_SNMP_MANS = snmp-ups.html
|
|
|
|
# (--with-usb)
|
|
SRC_USB_LIBUSB_PAGES = \
|
|
bcmxcp_usb.txt \
|
|
blazer-common.txt \
|
|
blazer_usb.txt \
|
|
nutdrv_atcl_usb.txt \
|
|
nutdrv_qx.txt \
|
|
richcomm_usb.txt \
|
|
riello_usb.txt \
|
|
tripplite_usb.txt \
|
|
usbhid-ups.txt
|
|
|
|
MAN_USB_LIBUSB_PAGES = \
|
|
bcmxcp_usb.8 \
|
|
blazer_usb.8 \
|
|
nutdrv_atcl_usb.8 \
|
|
nutdrv_qx.8 \
|
|
richcomm_usb.8 \
|
|
riello_usb.8 \
|
|
tripplite_usb.8 \
|
|
usbhid-ups.8
|
|
|
|
if WITH_USB
|
|
man8_MANS += $(MAN_USB_LIBUSB_PAGES)
|
|
endif
|
|
|
|
HTML_USB_LIBUSB_MANS = \
|
|
bcmxcp_usb.html \
|
|
blazer_usb.html \
|
|
nutdrv_qx.html \
|
|
nutdrv_atcl_usb.html \
|
|
richcomm_usb.html \
|
|
riello_usb.html \
|
|
tripplite_usb.html \
|
|
usbhid-ups.html
|
|
|
|
# (--with-neon)
|
|
SRC_NETXML_PAGES = netxml-ups.txt
|
|
MAN_NETXML_PAGES = netxml-ups.8
|
|
|
|
if WITH_NEON
|
|
man8_MANS += $(MAN_NETXML_PAGES)
|
|
endif
|
|
|
|
HTML_NETXML_MANS = netxml-ups.html
|
|
|
|
# (--with-powerman)
|
|
SRC_POWERMAN_PAGES = powerman-pdu.txt
|
|
MAN_POWERMAN_PAGES = powerman-pdu.8
|
|
|
|
if WITH_LIBPOWERMAN
|
|
man8_MANS += $(MAN_POWERMAN_PAGES)
|
|
endif
|
|
|
|
HTML_POWERMAN_MANS = powerman-pdu.html
|
|
|
|
# (--with-ipmi)
|
|
SRC_IPMIPSU_PAGES = nut-ipmipsu.txt
|
|
MAN_IPMIPSU_PAGES = nut-ipmipsu.8
|
|
|
|
if WITH_IPMI
|
|
man8_MANS += $(MAN_IPMIPSU_PAGES)
|
|
endif
|
|
|
|
HTML_IPMIPSU_MANS = nut-ipmipsu.html
|
|
|
|
SRC_MACOSX_PAGES = macosx-ups.txt
|
|
MAN_MACOSX_PAGES = macosx-ups.8
|
|
|
|
if WITH_MACOSX
|
|
man8_MANS += $(MAN_MACOSX_PAGES)
|
|
endif
|
|
|
|
HTML_MACOSX_MANS = macosx-ups.html
|
|
|
|
SRC_LINUX_I2C_PAGES = asem.txt
|
|
MAN_LINUX_I2C_PAGES = asem.8
|
|
|
|
if WITH_LINUX_I2C
|
|
man8_MANS += $(LINUX_I2C_PAGES)
|
|
endif
|
|
|
|
HTML_LINUX_I2C_MANS = asem.html
|
|
|
|
# SOME_DRIVERS
|
|
endif
|
|
|
|
MAN_MANS = \
|
|
$(MAN_CONF_PAGES) \
|
|
$(MAN_CLIENT_PAGES) \
|
|
$(MAN_TOOL_PAGES) \
|
|
$(MAN5_CGI_PAGES) \
|
|
$(MAN8_CGI_PAGES) \
|
|
$(MAN1_DEV_PAGES) \
|
|
$(MAN3_DEV_PAGES) \
|
|
$(MAN_SERIAL_PAGES) \
|
|
$(MAN_SNMP_PAGES) \
|
|
$(MAN_USB_LIBUSB_PAGES) \
|
|
$(MAN_NETXML_PAGES) \
|
|
$(MAN_POWERMAN_PAGES) \
|
|
$(MAN_IPMIPSU_PAGES) \
|
|
$(MAN_MACOSX_PAGES) \
|
|
$(MAN_LINUX_I2C_PAGES)
|
|
|
|
# distribute everything, even those not installed by default
|
|
# Note that 'dist' target requires AsciiDoc!
|
|
EXTRA_DIST = \
|
|
$(SRC_CONF_PAGES) \
|
|
$(SRC_CLIENT_PAGES) \
|
|
$(SRC_TOOL_PAGES) \
|
|
$(SRC_CGI_PAGES) \
|
|
$(SRC_DEV_PAGES) \
|
|
$(SRC_SERIAL_PAGES) \
|
|
$(SRC_SNMP_PAGES) \
|
|
$(SRC_USB_LIBUSB_PAGES) \
|
|
$(SRC_NETXML_PAGES) \
|
|
$(SRC_POWERMAN_PAGES) \
|
|
$(SRC_IPMIPSU_PAGES) \
|
|
$(SRC_MACOSX_PAGES) \
|
|
$(SRC_LINUX_I2C_PAGES) \
|
|
$(MAN_MANS) \
|
|
asciidoc.conf
|
|
|
|
HTML_MANS = \
|
|
$(HTML_CONF_MANS) \
|
|
$(HTML_CLIENT_MANS) \
|
|
$(HTML_TOOL_MANS) \
|
|
$(HTML_CGI_MANS) \
|
|
$(HTML_DEV_MANS) \
|
|
$(HTML_SERIAL_MANS) \
|
|
$(HTML_SNMP_MANS) \
|
|
$(HTML_USB_LIBUSB_MANS) \
|
|
$(HTML_NETXML_MANS) \
|
|
$(HTML_POWERMAN_MANS) \
|
|
$(HTML_IPMIPSU_MANS) \
|
|
$(HTML_MACOSX_MANS) \
|
|
$(HTML_LINUX_I2C_MANS)
|
|
|
|
all:
|
|
|
|
html-man: $(HTML_MANS) index.html
|
|
|
|
CLEANFILES = *.xml *.html
|
|
|
|
SUFFIXES = .txt .html .1 .3 .5 .8
|
|
|
|
if HAVE_ASCIIDOC
|
|
|
|
.txt.html:
|
|
$(ASCIIDOC) --backend=xhtml11 \
|
|
--attribute localdate=`TZ=UTC date +%Y-%m-%d` \
|
|
--attribute localtime=`TZ=UTC date +%H:%M:%S` \
|
|
--attribute nutversion="@PACKAGE_VERSION@" \
|
|
-o $@ $<
|
|
|
|
### Prior to Asciidoc ~8.6.8, the --destination-dir flag didn't seem to affect the location of the intermediate .xml file.
|
|
A2X_MANPAGE_OPTS = --doctype manpage --format manpage \
|
|
--xsltproc-opts "--nonet" \
|
|
--attribute mansource="Network UPS Tools" \
|
|
--attribute manversion="@PACKAGE_VERSION@" \
|
|
--attribute manmanual="NUT Manual" \
|
|
--destination-dir=.
|
|
|
|
.txt.1:
|
|
$(A2X) $(A2X_MANPAGE_OPTS) $<
|
|
|
|
.txt.3:
|
|
$(A2X) $(A2X_MANPAGE_OPTS) $<
|
|
|
|
.txt.5:
|
|
$(A2X) $(A2X_MANPAGE_OPTS) $<
|
|
|
|
.txt.8:
|
|
$(A2X) $(A2X_MANPAGE_OPTS) $<
|
|
|
|
else !HAVE_ASCIIDOC
|
|
|
|
.txt.html:
|
|
@if [ -r "$@" ]; then \
|
|
echo "Not (re)building $@ manual page, since 'asciidoc', 'xmllint' or 'xsltproc' were not found." ; \
|
|
else \
|
|
echo "Could not find prebuilt $@ manual page." ; \
|
|
echo "If you are building from Git, do you have all of the asciidoc/a2x tools installed?"; \
|
|
exit 1; \
|
|
fi
|
|
|
|
.txt.1:
|
|
@if [ -r "$@" ]; then \
|
|
echo "Not (re)building $@ manual page, since 'asciidoc', 'xmllint' or 'xsltproc' were not found." ; \
|
|
else \
|
|
echo "Could not find prebuilt $@ manual page." ; \
|
|
echo "If you are building from Git, do you have all of the asciidoc/a2x tools installed?"; \
|
|
exit 1; \
|
|
fi
|
|
|
|
.txt.3:
|
|
@if [ -r "$@" ]; then \
|
|
echo "Not (re)building $@ manual page, since 'asciidoc', 'xmllint' or 'xsltproc' were not found." ; \
|
|
else \
|
|
echo "Could not find prebuilt $@ manual page." ; \
|
|
echo "If you are building from Git, do you have all of the asciidoc/a2x tools installed?"; \
|
|
exit 1; \
|
|
fi
|
|
|
|
.txt.5:
|
|
@if [ -r "$@" ]; then \
|
|
echo "Not (re)building $@ manual page, since 'asciidoc', 'xmllint' or 'xsltproc' were not found." ; \
|
|
else \
|
|
echo "Could not find prebuilt $@ manual page." ; \
|
|
echo "If you are building from Git, do you have all of the asciidoc/a2x tools installed?"; \
|
|
exit 1; \
|
|
fi
|
|
|
|
.txt.8:
|
|
@if [ -r "$@" ]; then \
|
|
echo "Not (re)building $@ manual page, since 'asciidoc', 'xmllint' or 'xsltproc' were not found." ; \
|
|
else \
|
|
echo "Could not find prebuilt $@ manual page." ; \
|
|
echo "If you are building from Git, do you have all of the asciidoc/a2x tools installed?"; \
|
|
exit 1; \
|
|
fi
|
|
|
|
endif !HAVE_ASCIIDOC
|