107 lines
3.4 KiB
Groff
107 lines
3.4 KiB
Groff
.TH snmp\-ups 8 "Fri May 15 2009" "" "Network UPS Tools (NUT)"
|
|
.SH NAME
|
|
snmp\(hyups \- Multi\(hyMIB Driver for SNMP UPS equipment
|
|
.SH NOTE
|
|
This man page only documents the hardware\(hyspecific features of the
|
|
snmp\(hyups driver. For information about the core driver, see
|
|
\fBnutupsdrv\fR(8).
|
|
|
|
.SH SUPPORTED HARDWARE
|
|
The snmp\(hyups driver automatically detects and supports a wide range of devices by loading various MIBS:
|
|
.IP "ietf:"
|
|
UPS that is RFC 1628 (UPS MIB) compliant, ie MGE UPS SYSTEMS, Liebert, perhaps others (default)
|
|
.IP "mge:"
|
|
MGE UPS SYSTEMS and MGE Office Protection Systems devices with SNMP cards (ref 66062, 66045, 66074 and 66244)
|
|
.IP "apcc:"
|
|
APC AP9606 APC Web/SNMP management card, perhaps others
|
|
.IP "netvision:"
|
|
Socomec Sicon UPS with Netvision Web/SNMP management card/external box
|
|
.IP "pw:"
|
|
Powerware devices with ConnectUPS SNMP cards
|
|
.IP "aphel_genesisII:"
|
|
Eaton Powerware ePDU Monitored
|
|
.IP "aphel_revelation:"
|
|
Eaton Powerware ePDU Managed
|
|
.IP "raritan:"
|
|
Various Raritan PDUs
|
|
.IP "baytech:"
|
|
Various BayTech PDUs
|
|
.IP "cpqpower:"
|
|
HP/Compaq AF401A management card, perhaps others
|
|
|
|
.SH EXTRA ARGUMENTS
|
|
|
|
This driver supports the following optional settings in the
|
|
\fBups.conf\fR(5):
|
|
|
|
.IP "mibs=\fIname\fR"
|
|
Set MIB compliance (default=auto, allowed entries: refer to the above SUPPORTED HARDWARE).
|
|
With auto the driver will try a select set of objets until it finds one
|
|
that the device responds to.
|
|
|
|
.IP "community=\fIname\fR"
|
|
Set community name (default = public).
|
|
Note that you require a RW community name to perform UPS settings (as for a powerdown).
|
|
|
|
.IP "snmp_version=\fIversion\fR"
|
|
Set SNMP version (default = v1, the other allowed value is v2c)
|
|
|
|
.IP "pollfreq=\fIvalue\fR"
|
|
Set polling frequency in seconds, to reduce network flow (default=30)
|
|
|
|
.IP "notransferoids"
|
|
Disable the monitoring of the low and high voltage transfer OIDs in
|
|
the hardware. This will remove input.transfer.low and input.transfer.high
|
|
from the list of variables. This should only be used on APCC Symmetra
|
|
equipment which has strangeness in the three\(hyphase power reporting.
|
|
|
|
.SH REQUIREMENTS
|
|
You will need to install the Net\(hySNMP package from
|
|
http://www.net\(hysnmp.org/ before building this driver.
|
|
|
|
.SH LIMITATION
|
|
.SS Shutdown
|
|
|
|
This driver does not provide a proper upsdrv_shutdown() function. There probably
|
|
never will be one, since at the time this script should run (near the end of
|
|
the system halt script), there will be no network capabilities anymore.
|
|
Probably the only way to shutdown an SNMP UPS is by sending it a shutdown
|
|
with delay command through \fBupscmd\fR(8) and hope for the best that the
|
|
system will have finished shutting down before the power is cut.
|
|
|
|
.SH INSTALLATION
|
|
This driver is only built if the Net SNMP development files are present on the system.
|
|
You can also force it to be built by using "configure \-\-with\-snmp=yes" before calling make.
|
|
|
|
.SH IMPLEMENTATION
|
|
The hostname of the UPS is specified with the "port" value in
|
|
\fBups.conf\fR, i.e.:
|
|
|
|
.nf
|
|
[snmp]
|
|
driver = snmp\-ups
|
|
port = snmp\-ups.example.com
|
|
community = public
|
|
snmp_version = v1
|
|
mibs = ietf
|
|
pollfreq = 15
|
|
.fi
|
|
|
|
.SH AUTHORS
|
|
Arnaud Quette, Dmitry Frolov
|
|
|
|
Sponsored by Eaton <http://www.eaton.com>
|
|
and originally by MGE UPS SYSTEMS <http://www.mgeups.com/>
|
|
|
|
|
|
.SH SEE ALSO
|
|
|
|
.SS The core driver:
|
|
\fBnutupsdrv\fR(8)
|
|
|
|
.SS NUT SNMP Protocols Library
|
|
Available at: http://random.networkupstools.org/protocols/snmp/
|
|
|
|
.SS Internet resources:
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|