89 lines
2.6 KiB
Groff
89 lines
2.6 KiB
Groff
.TH SAFENET 8 "Mon Dec 29 2008" "" "Network UPS Tools (NUT)"
|
|
.SH NAME
|
|
safenet \- Driver for SafeNet compatible UPS equipment
|
|
.SH NOTE
|
|
This man page only documents the hardware\(hyspecific features of the
|
|
safenet driver. For information about the core driver, see
|
|
\fBnutupsdrv\fR(8).
|
|
|
|
.SH SUPPORTED HARDWARE
|
|
This driver supports UPS equipment which can be controlled via
|
|
SafeNet v1.0 for Windows (serial interface only).
|
|
|
|
.SH EXTRA ARGUMENTS
|
|
This driver supports the following optional settings in the
|
|
\fBups.conf\fR(5):
|
|
|
|
.IP "manufacturer=\fIvalue\fR"
|
|
Autodetection of this parameter is not possible yet (and it probably
|
|
never will be). Therefore, this user defined string accepts any name. The
|
|
default is \fIunknown\fR.
|
|
|
|
.IP "modelname=\fIvalue\fR"
|
|
Like manufacturer above. The default is \fIunknown\fR.
|
|
|
|
.IP "serialnumber=\fIvalue\fR"
|
|
Like manufacturer above. The default is \fIunknown\fR.
|
|
|
|
.IP "ondelay=\fIvalue\fR"
|
|
Time to wait before switching on the UPS (minutes). Defaults to 1 minute.
|
|
|
|
.IP "offdelay=\fIvalue\fR"
|
|
Time to wait before shutting down the UPS (seconds). Defaults to 30 seconds.
|
|
|
|
.SH UPSCMD
|
|
This driver supports some instant commands (see \fBupscmd\fR(8)):
|
|
|
|
.IP "test.battery.start"
|
|
Start UPS self test
|
|
|
|
.IP "test.battery.stop"
|
|
Cancel UPS self test
|
|
|
|
.IP "test.failure.start"
|
|
Start simulated power failure
|
|
|
|
.IP "test.failure.stop"
|
|
Cancel simulated power failure
|
|
|
|
.IP "beeper.enable"
|
|
Enable the UPS beeper
|
|
|
|
.IP "beeper.mute"
|
|
Temporarily mute the UPS beeper
|
|
|
|
.IP "beeper.toggle"
|
|
Toggle the UPS beeper
|
|
|
|
.IP "shutdown.return"
|
|
Turn off the load and wait for the power to return. Uses the timer
|
|
defined by \fBoffdelay\fR.
|
|
|
|
.IP "shutdown.reboot"
|
|
Turn off the load and return. Uses the timers defined by \fBoffdelay\fR
|
|
and \fBondelay\fR.
|
|
|
|
.SH KNOWN PROBLEMS
|
|
If you run the \fBshutdown.return\fR command with mains present, the output
|
|
may stay on or switch off and not back on again. The \fBshutdown.reboot\fR
|
|
command will unconditionally switch on the load again (with or without mains
|
|
present).
|
|
|
|
If the driver is called with the '\(hyk' option (or through \fBupsdrvctl
|
|
shutdown\fR) it tries to detect which command should be used in an attempt
|
|
to stay off until mains is present again or to cycle the output if the
|
|
power returned in the mean time. This isn't bullet proof and you should be
|
|
prepared that the power will either not be shutdown or that it doesn't
|
|
return when the power comes back.
|
|
|
|
.SH AUTHOR
|
|
Arjen de Korte <adkorte\(hyguest at alioth.debian.org>
|
|
|
|
.SH SEE ALSO
|
|
|
|
.SS The core driver:
|
|
\fBnutupsdrv\fR(8)
|
|
|
|
.SS Internet resources:
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|