190 lines
10 KiB
Plaintext
190 lines
10 KiB
Plaintext
# Network UPS Tools: variable and command descriptions
|
|
#
|
|
# This file is optional. You may delete it to save resources, but
|
|
# clients will receive "Unavailable" for any description requests.
|
|
#
|
|
# *** NOTE *** : When updating this file, also update docs/new-names.txt
|
|
|
|
VARDESC ups.alarm "UPS alarms"
|
|
VARDESC ups.status "UPS status"
|
|
VARDESC ups.time "Internal UPS clock time"
|
|
VARDESC ups.date "Internal UPS clock date"
|
|
VARDESC ups.model "UPS model"
|
|
VARDESC ups.mfr "UPS manufacturer"
|
|
VARDESC ups.mfr.date "UPS manufacturing date"
|
|
VARDESC ups.serial "UPS serial number"
|
|
VARDESC ups.vendorid "Vendor ID for USB devices"
|
|
VARDESC ups.productid "Product ID for USB devices"
|
|
VARDESC ups.firmware "UPS firmware"
|
|
VARDESC ups.firmware.aux "Auxiliary device firmware"
|
|
VARDESC ups.temperature "UPS temperature (degrees C)"
|
|
VARDESC ups.load "Load on UPS (percent of full)"
|
|
VARDESC ups.load.high "Load when UPS switches to overload condition (percent)"
|
|
VARDESC ups.id "UPS system identifier"
|
|
VARDESC ups.delay.start "Interval to wait before (re)starting the load (seconds)"
|
|
VARDESC ups.delay.reboot "Interval to wait before rebooting the UPS (seconds)"
|
|
VARDESC ups.delay.shutdown "Interval to wait after shutdown with delay command (seconds)"
|
|
VARDESC ups.timer.start "Time before the load will be started (seconds)"
|
|
VARDESC ups.timer.reboot "Time before the load will be rebooted (seconds)"
|
|
VARDESC ups.timer.shutdown "Time before the load will be shutdown (seconds)"
|
|
VARDESC ups.test.interval "Interval between self tests (seconds)"
|
|
VARDESC ups.test.result "Results of last self test"
|
|
VARDESC ups.display.language "Language to use on front panel"
|
|
VARDESC ups.contacts "UPS external contact sensors"
|
|
VARDESC ups.power "Current value of apparent power (VA)"
|
|
VARDESC ups.power.nominal "UPS power rating (VA)"
|
|
VARDESC ups.realpower "Current value of real power (W)"
|
|
VARDESC ups.realpower.nominal "UPS real power rating (W)"
|
|
VARDESC ups.beeper.status "UPS beeper status"
|
|
VARDESC ups.type "UPS type"
|
|
VARDESC ups.start.auto "UPS starts when mains is (re)applied"
|
|
VARDESC ups.start.battery "Allow to start UPS from battery"
|
|
VARDESC ups.start.reboot "UPS reboots when power returns during shutdown delay"
|
|
|
|
VARDESC input.voltage "Input voltage (V)"
|
|
VARDESC input.voltage.extended "Extended input voltage range"
|
|
VARDESC input.voltage.maximum "Maximum incoming voltage seen (V)"
|
|
VARDESC input.voltage.minimum "Minimum incoming voltage seen (V)"
|
|
VARDESC input.voltage.nominal "Nominal input voltage (V)"
|
|
VARDESC input.transfer.reason "Reason for last transfer to battery"
|
|
VARDESC input.transfer.low "Low voltage transfer point (V)"
|
|
VARDESC input.transfer.high "High voltage transfer point (V)"
|
|
VARDESC input.transfer.low.min "smallest settable low voltage transfer point (V)"
|
|
VARDESC input.transfer.low.max "greatest settable low voltage transfer point (V)"
|
|
VARDESC input.transfer.high.min "smallest settable high voltage transfer point (V)"
|
|
VARDESC input.transfer.high.max "greatest settable high voltage transfer point (V)"
|
|
VARDESC input.sensitivity "Input power sensitivity"
|
|
VARDESC input.quality "Input power quality"
|
|
VARDESC input.current "Input current (A)"
|
|
VARDESC input.current.nominal "Nominal input current (A)"
|
|
VARDESC input.frequency "Input line frequency (Hz)"
|
|
VARDESC input.frequency.extended "Extended input frequency range"
|
|
VARDESC input.frequency.nominal "Nominal input line frequency (Hz)"
|
|
VARDESC input.frequency.low "Minimum input line frequency (Hz)"
|
|
VARDESC input.frequency.high "Maximum input line frequency (Hz)"
|
|
VARDESC input.transfer.boost.low "Low voltage boosting transfer point (V)"
|
|
VARDESC input.transfer.boost.high "High voltage boosting transfer point (V)"
|
|
VARDESC input.transfer.trim.low "Low voltage trimming transfer point (V)"
|
|
VARDESC input.transfer.trim.high "High voltage trimming transfer point (V)"
|
|
|
|
VARDESC output.voltage "Output voltage (V)"
|
|
VARDESC output.voltage.nominal "Nominal output voltage (V)"
|
|
VARDESC output.frequency "Output frequency (Hz)"
|
|
VARDESC output.frequency.nominal "Nominal output frequency (Hz)"
|
|
VARDESC output.current "Output current (A)"
|
|
VARDESC output.current.nominal "Nominal output current (A)"
|
|
|
|
VARDESC battery.charge "Battery charge (percent of full)"
|
|
VARDESC battery.charge.low "Remaining battery level when UPS switches to LB (percent)"
|
|
VARDESC battery.charge.restart "Minimum battery level for restart after power off (percent)"
|
|
VARDESC battery.charge.warning "Battery level when UPS switches to Warning state (percent)"
|
|
VARDESC battery.voltage "Battery voltage (V)"
|
|
VARDESC battery.current "Battery current (A)"
|
|
VARDESC battery.capacity "Battery capacity (Ah)"
|
|
VARDESC battery.temperature "Battery temperature (degrees C)"
|
|
VARDESC battery.voltage.nominal "Nominal battery voltage (V)"
|
|
VARDESC battery.runtime "Battery runtime (seconds)"
|
|
VARDESC battery.runtime.low "Remaining battery runtime when UPS switches to LB (seconds)"
|
|
VARDESC battery.alarm.threshold "Battery alarm threshold"
|
|
VARDESC battery.date "Battery change date"
|
|
VARDESC battery.mfr.date "Battery manufacturing date"
|
|
VARDESC battery.packs "Number of battery packs"
|
|
VARDESC battery.packs.bad "Number of bad battery packs"
|
|
VARDESC battery.type "Battery chemistry"
|
|
VARDESC battery.protection "Prevent deep discharge of battery"
|
|
VARDESC battery.energysave "Switch off when running on battery and no/low load"
|
|
|
|
VARDESC ambient.temperature "Ambient temperature (degrees C)"
|
|
VARDESC ambient.temperature.alarm "Ambient temperature alarm is active"
|
|
VARDESC ambient.temperature.alarm.maximum "Maximum allowed ambient temperature"
|
|
VARDESC ambient.temperature.alarm.minimum "Minimum allowed ambient temperature"
|
|
VARDESC ambient.temperature.alarm.enable "Enable ambient temperature alarm"
|
|
VARDESC ambient.humidity "Ambient humidity"
|
|
VARDESC ambient.humidity.alarm "Ambient humidity alarm is active"
|
|
VARDESC ambient.humidity.alarm.maximum "Maximum allowed ambient humidity"
|
|
VARDESC ambient.humidity.alarm.minimum "Minimum allowed ambient humidity"
|
|
VARDESC ambient.humidity.alarm.enable "Enable ambient humidity alarm"
|
|
|
|
# FIXME: the outlet collection is indexed - solve with regexs?
|
|
#
|
|
# VARDESC outlet.[[:digit:]]+.id "Outlet system identifier (<index>)"
|
|
|
|
VARDESC outlet.id "Outlet system identifier"
|
|
VARDESC outlet.desc "Outlet description"
|
|
VARDESC outlet.switch "Outlet switch control"
|
|
VARDESC outlet.status "Outlet switch status"
|
|
VARDESC outlet.switchable "Outlet switch ability"
|
|
VARDESC outlet.autoswitch.charge.low "Remaining battery level to power off this outlet (percent)"
|
|
VARDESC outlet.delay.shutdown "Interval to wait before shutting down this outlet (seconds)"
|
|
VARDESC outlet.delay.start "Interval to wait before restarting this outlet (seconds)"
|
|
VARDESC outlet.1.id "Outlet system identifier"
|
|
VARDESC outlet.1.desc "Outlet description"
|
|
VARDESC outlet.1.switch "Outlet switch control"
|
|
VARDESC outlet.1.status "Outlet switch status"
|
|
VARDESC outlet.1.switchable "Outlet switch ability"
|
|
VARDESC outlet.1.autoswitch.charge.low "Remaining battery level to power off this outlet (percent)"
|
|
VARDESC outlet.1.delay.shutdown "Interval to wait before shutting down this outlet (seconds)"
|
|
VARDESC outlet.1.delay.start "Interval to wait before restarting this outlet (seconds)"
|
|
VARDESC outlet.2.id "Outlet system identifier"
|
|
VARDESC outlet.2.desc "Outlet description"
|
|
VARDESC outlet.2.switch "Outlet switch control"
|
|
VARDESC outlet.2.status "Outlet switch status"
|
|
VARDESC outlet.2.switchable "Outlet switch ability"
|
|
VARDESC outlet.2.autoswitch.charge.low "Remaining battery level to power off this outlet (percent)"
|
|
VARDESC outlet.2.delay.shutdown "Interval to wait before shutting down this outlet (seconds)"
|
|
VARDESC outlet.2.delay.start "Interval to wait before restarting this outlet (seconds)"
|
|
|
|
VARDESC driver.name "Driver name"
|
|
VARDESC driver.version "Driver version - NUT release"
|
|
VARDESC driver.version.internal "Internal driver version"
|
|
|
|
# FIXME: driver.parameter and driver.flag can have many possible members
|
|
#
|
|
# VARDESC driver.parameter.[[:alpha:]]+ "Driver parameter: <name>"
|
|
# VARDESC driver.flag.[[:alpha:]]+ "Driver flag: <name>"
|
|
|
|
VARDESC server.info "Server information"
|
|
VARDESC server.version "Server version"
|
|
|
|
CMDDESC load.off "Turn off the load immediately"
|
|
CMDDESC load.on "Turn on the load immediately"
|
|
CMDDESC shutdown.return "Turn off the load and return when power is back"
|
|
CMDDESC shutdown.stayoff "Turn off the load and remain off"
|
|
CMDDESC shutdown.stop "Stop a shutdown in progress"
|
|
CMDDESC shutdown.reboot "Shut down the load briefly while rebooting the UPS"
|
|
CMDDESC shutdown.reboot.graceful "Delay briefly then shut down the load while rebooting the UPS"
|
|
CMDDESC test.panel.start "Start testing the UPS panel"
|
|
CMDDESC test.panel.stop "Stop a UPS panel test"
|
|
CMDDESC test.failure.start "Start a simulated power failure"
|
|
CMDDESC test.failure.stop "Stop simulating a power failure"
|
|
CMDDESC test.battery.start "Start a battery test"
|
|
CMDDESC test.battery.start.quick "Start a quick battery test"
|
|
CMDDESC test.battery.start.deep "Start a deep battery test"
|
|
CMDDESC test.battery.stop "Stop the battery test"
|
|
CMDDESC calibrate.start "Start run time calibration"
|
|
CMDDESC calibrate.stop "Stop run time calibration"
|
|
CMDDESC bypass.start "Put the UPS in bypass mode"
|
|
CMDDESC bypass.stop "Take the UPS out of bypass mode"
|
|
CMDDESC reset.input.minmax "Reset minimum and maximum input voltage status"
|
|
CMDDESC reset.watchdog "Reset watchdog timer"
|
|
CMDDESC beeper.on "Obsolete (use beeper.enable)"
|
|
CMDDESC beeper.off "Obsolete (use beeper.disable or beeper.mute)"
|
|
CMDDESC beeper.enable "Enable the UPS beeper"
|
|
CMDDESC beeper.disable "Disable the UPS beeper"
|
|
CMDDESC beeper.mute "Temporarily mute the UPS beeper"
|
|
CMDDESC beeper.toggle "Toggle the UPS beeper"
|
|
CMDDESC outlet.1.load.off "Turn off the load on outlet 1 immediately"
|
|
CMDDESC outlet.1.load.on "Turn on the load on outlet 1 immediately"
|
|
CMDDESC outlet.2.load.off "Turn off the load on outlet 2 immediately"
|
|
CMDDESC outlet.2.load.on "Turn on the load on outlet 2 immediately"
|
|
|
|
# The following two commands should *only* be defined when you need
|
|
# to compose a 'shutdown.return' command by sending both a switch-off
|
|
# with delay and a switch-on with delay command to the UPS. If this
|
|
# can be done with a single command, use 'shutdown.return' instead.
|
|
# Note that the switch-on with delay command *must not* turn on the
|
|
# load if the UPS is on battery.
|
|
#
|
|
CMDDESC load.off.delay "Turn off the load with a delay (seconds)"
|
|
CMDDESC load.on.delay "Turn on the load with a delay (seconds)"
|