115 lines
3.1 KiB
Plaintext
115 lines
3.1 KiB
Plaintext
APCUPSD-UPS(8)
|
|
==============
|
|
|
|
NAME
|
|
----
|
|
|
|
apcupsd-ups - Driver for apcupsd client access
|
|
|
|
NOTE
|
|
----
|
|
|
|
This man page only documents the specific features of the
|
|
*apcupsd-ups* driver. For information about the core driver, see
|
|
linkman:nutupsdrv[8].
|
|
|
|
DESCRIPTION
|
|
-----------
|
|
|
|
This driver is a client to *apcupsd* (another UPS monitoring project).
|
|
|
|
*apcupsd-ups* acts as an *apcupsd* client, simply forwarding data.
|
|
This can be useful in cases where both protocols are required in a network,
|
|
or in case apcupsd has a required UPS access mode missing from NUT.
|
|
|
|
EXTRA ARGUMENTS
|
|
---------------
|
|
|
|
This driver supports the following optional settings in linkman:nut.conf[5]:
|
|
|
|
*port*=<hostname>[:<port>]::
|
|
This is the name of a remote host running apcupsd (plus an optional port).
|
|
|
|
For instance:
|
|
|
|
[apcupsd]
|
|
driver = apcupsd-ups
|
|
port = localhost
|
|
desc = "apcupsd client"
|
|
|
|
BACKGROUND
|
|
----------
|
|
|
|
This driver was originally written in one evening to allow interoperating
|
|
with *apcupsd*.
|
|
|
|
SUPPORTED VARIABLES
|
|
-------------------
|
|
|
|
The following variables are translated from *apcupsd* to NUT.
|
|
All times should be converted to seconds (please file a bug
|
|
if you notice a mismatch in units).
|
|
|
|
[width="50%",cols="m,m",options="header"]
|
|
|===============================
|
|
| apcupsd variable | NUT variable(s)
|
|
| BCHARGE | battery.charge
|
|
| MBATTCHG | battery.charge.low
|
|
| RETPCT | battery.charge.restart
|
|
| BATTDATE | battery.date
|
|
| TIMELEFT | battery.runtime
|
|
| MINTIMEL | battery.runtime.low
|
|
| BATTV | battery.voltage
|
|
| NOMBATTV | battery.voltage.nominal
|
|
| LINEFREQ | input.frequency
|
|
| SENSE | input.sensitivity
|
|
| HITRANS | input.transfer.high
|
|
| LOTRANS | input.transfer.low
|
|
| LASTXFER | input.transfer.reason
|
|
| LINEV | input.voltage
|
|
| MAXLINEV | input.voltage.maximum
|
|
| MINLINEV | input.voltage.minimum
|
|
| NOMINV | input.voltage.nominal
|
|
| LINEFREQ | output.frequency
|
|
| OUTPUTV | output.voltage
|
|
| NOMOUTV | output.voltage.nominal
|
|
| DATE | ups.date, ups.time
|
|
| DSHUTD | ups.delay.shutdown
|
|
| DWAKE | ups.delay.start
|
|
| FIRMWARE | ups.firmware, ups.firmware.aux
|
|
| UPSNAME | ups.id
|
|
| LOADPCT | ups.load
|
|
| MANDATE | ups.mfr.date
|
|
| NOMPOWER | ups.realpower.nominal
|
|
| SERIALNO | ups.serial
|
|
| STATUS | ups.status
|
|
| ITEMP | ups.temperature
|
|
| STESTI | ups.test.interval
|
|
| SELFTEST | ups.test.result
|
|
|===============================
|
|
|
|
LIMITATIONS
|
|
-----------
|
|
|
|
Access to *apcupsd* is strictly read only: no commands can be issued. This
|
|
stems from the design of *apcupsd*, where the settings are changed in
|
|
*apctest*. In order to run *apctest*, *apcupsd* must be stopped (and *apcupsd*
|
|
exposes the UPS to the network).
|
|
|
|
AUTHOR
|
|
------
|
|
|
|
Andreas Steinmetz
|
|
|
|
SEE ALSO
|
|
--------
|
|
|
|
linkman:ups.conf[5],
|
|
linkman:nutupsdrv[8]
|
|
|
|
Internet Resources:
|
|
~~~~~~~~~~~~~~~~~~~
|
|
|
|
* The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|
|
* The apcupsd home page: http://www.apcupsd.org/
|