nut-debian/drivers/nutdrv_atcl_usb.c
2022-07-10 09:23:45 +02:00

676 lines
18 KiB
C

/*
* nutdrv_atcl_usb.c - driver for generic-brand "ATCL FOR UPS"
*
* Copyright (C) 2013-2014 Charles Lepple <clepple+nut@gmail.com>
* Copyright (C) 2016 Eaton
*
* Loosely based on richcomm_usb.c,
* Copyright (C) 2007 Peter van Valderen <p.v.valderen@probu.nl>
* Dirk Teurlings <dirk@upexia.nl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "main.h"
#include "usb-common.h"
/* driver version */
#define DRIVER_NAME "'ATCL FOR UPS' USB driver"
#define DRIVER_VERSION "1.16"
/* driver description structure */
upsdrv_info_t upsdrv_info = {
DRIVER_NAME,
DRIVER_VERSION,
"Charles Lepple <clepple+nut@gmail.com>",
DRV_EXPERIMENTAL,
{ NULL }
};
#define STATUS_ENDPOINT (USB_ENDPOINT_IN | 1)
#define SHUTDOWN_ENDPOINT (USB_ENDPOINT_OUT | 2)
#define STATUS_PACKETSIZE 8
#define SHUTDOWN_PACKETSIZE 8
/* Probably can reduce this, since the pcap file shows mostly 1050-ish ms response times */
#define ATCL_USB_TIMEOUT USB_TIMEOUT
/* limit the amount of spew that goes in the syslog when we lose the UPS (from nut_usb.h) */
#define USB_ERR_LIMIT 10 /* start limiting after 10 in a row */
#define USB_ERR_RATE 10 /* then only print every 10th error */
#define USB_VENDOR_STRING "ATCL FOR UPS"
static usb_device_id_t atcl_usb_id[] = {
/* ATCL FOR UPS */
{ USB_DEVICE(0x0001, 0x0000), NULL },
/* Terminating entry */
{ 0, 0, NULL }
};
static usb_dev_handle *udev = NULL;
static USBDevice_t usbdevice;
static unsigned int comm_failures = 0;
static int device_match_func(USBDevice_t *device, void *privdata)
{
char *requested_vendor;
NUT_UNUSED_VARIABLE(privdata);
switch (is_usb_device_supported(atcl_usb_id, device))
{
case SUPPORTED:
if(!device->Vendor) {
upsdebugx(1, "Couldn't retrieve USB string descriptor for vendor. Check permissions?");
requested_vendor = getval("vendor");
if(requested_vendor) {
if(!strcmp("NULL", requested_vendor)) {
upsdebugx(3, "Matched device with NULL vendor string.");
return 1;
}
}
upsdebugx(1, "To keep trying (in case your device does not have a vendor string), use vendor=NULL");
return 0;
}
if(!strcmp(device->Vendor, USB_VENDOR_STRING)) {
upsdebugx(4, "Matched expected vendor='%s'.", USB_VENDOR_STRING);
return 1;
}
/* Didn't match, but the user provided an alternate vendor ID: */
requested_vendor = getval("vendor");
if(requested_vendor) {
if(!strcmp(device->Vendor, requested_vendor)) {
upsdebugx(3, "Matched device with vendor='%s'.", requested_vendor);
return 1;
} else {
upsdebugx(2, "idVendor=%04x and idProduct=%04x, "
"but provided vendor '%s' does not match device: '%s'.",
device->VendorID, device->ProductID, requested_vendor, device->Vendor);
return 0;
}
}
/* TODO: automatic way of suggesting other drivers? */
upsdebugx(2, "idVendor=%04x and idProduct=%04x, "
"but device vendor string '%s' does not match expected string '%s'. "
"Have you tried the nutdrv_qx driver?",
device->VendorID, device->ProductID, device->Vendor, USB_VENDOR_STRING);
return 0;
case POSSIBLY_SUPPORTED:
case NOT_SUPPORTED:
default:
return 0;
}
}
static USBDeviceMatcher_t device_matcher = {
&device_match_func,
NULL,
NULL
};
static int query_ups(char *reply)
{
int ret;
ret = usb_interrupt_read(udev, STATUS_ENDPOINT, (usb_ctrl_charbuf)reply, STATUS_PACKETSIZE, ATCL_USB_TIMEOUT);
if (ret <= 0) {
upsdebugx(2, "status interrupt read: %s", ret ? nut_usb_strerror(ret) : "timeout");
return ret;
}
assert ((uintmax_t)ret < (uintmax_t)SIZE_MAX);
upsdebug_hex(3, "read", reply, (size_t)ret);
return ret;
}
static void usb_comm_fail(const char *fmt, ...)
{
int ret;
char why[SMALLBUF];
va_list ap;
/* this means we're probably here because select was interrupted */
if (exit_flag != 0) {
return; /* ignored, since we're about to exit anyway */
}
comm_failures++;
if ((comm_failures == USB_ERR_LIMIT) || ((comm_failures % USB_ERR_RATE) == 0)) {
upslogx(LOG_WARNING, "Warning: excessive comm failures, limiting error reporting");
}
/* once it's past the limit, only log once every USB_ERR_LIMIT calls */
if ((comm_failures > USB_ERR_LIMIT) && ((comm_failures % USB_ERR_LIMIT) != 0)) {
return;
}
/* generic message if the caller hasn't elaborated */
if (!fmt) {
upslogx(LOG_WARNING, "Communications with UPS lost - check cabling");
return;
}
va_start(ap, fmt);
#ifdef HAVE_PRAGMAS_FOR_GCC_DIAGNOSTIC_IGNORED_FORMAT_NONLITERAL
#pragma GCC diagnostic push
#endif
#ifdef HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_FORMAT_NONLITERAL
#pragma GCC diagnostic ignored "-Wformat-nonliteral"
#endif
#ifdef HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_FORMAT_SECURITY
#pragma GCC diagnostic ignored "-Wformat-security"
#endif
ret = vsnprintf(why, sizeof(why), fmt, ap);
#ifdef HAVE_PRAGMAS_FOR_GCC_DIAGNOSTIC_IGNORED_FORMAT_NONLITERAL
#pragma GCC diagnostic pop
#endif
va_end(ap);
if ((ret < 1) || (ret >= (int) sizeof(why))) {
upslogx(LOG_WARNING, "usb_comm_fail: vsnprintf needed more than %d bytes", (int)sizeof(why));
}
upslogx(LOG_WARNING, "Communications with UPS lost: %s", why);
}
static void usb_comm_good(void)
{
if (comm_failures == 0) {
return;
}
upslogx(LOG_NOTICE, "Communications with UPS re-established");
comm_failures = 0;
}
/*
* Callback that is called by usb_device_open() that handles USB device
* settings prior to accepting the devide. At the very least claim the
* device here. Detaching the kernel driver will be handled by the
* caller, don't do this here. Return < 0 on error, 0 or higher on
* success.
*/
static int driver_callback(usb_dev_handle *handle, USBDevice_t *device)
{
int ret;
NUT_UNUSED_VARIABLE(device);
if ((ret = usb_set_configuration(handle, 1)) < 0) {
upslogx(LOG_WARNING, "Can't set USB configuration: %s", nut_usb_strerror(ret));
return -1;
}
if ((ret = usb_claim_interface(handle, 0)) < 0) {
upslogx(LOG_WARNING, "Can't claim USB interface: %s", nut_usb_strerror(ret));
return -1;
}
/* TODO: HID SET_IDLE to 0 (not necessary?) */
return 1;
}
static int usb_device_close(usb_dev_handle *handle)
{
int ret = 0;
if (!handle) {
return 0;
}
/* usb_release_interface() sometimes blocks and goes
* into uninterruptible sleep. So don't do it.
*/
/* usb_release_interface(handle, 0); */
#if WITH_LIBUSB_1_0
libusb_close(handle);
libusb_exit(NULL);
#else
ret = usb_close(handle);
#endif
return ret;
}
static int usb_device_open(usb_dev_handle **handlep, USBDevice_t *device, USBDeviceMatcher_t *matcher,
int (*callback)(usb_dev_handle *handle, USBDevice_t *device))
{
int ret = 0;
uint8_t iManufacturer = 0, iProduct = 0, iSerialNumber = 0;
/* libusb base init */
#if WITH_LIBUSB_1_0
if (libusb_init(NULL) < 0) {
libusb_exit(NULL);
fatal_with_errno(EXIT_FAILURE, "Failed to init libusb 1.0");
}
#else /* => WITH_LIBUSB_0_1 */
usb_init();
usb_find_busses();
usb_find_devices();
#endif /* WITH_LIBUSB_1_0 */
#ifndef __linux__ /* SUN_LIBUSB (confirmed to work on Solaris and FreeBSD) */
/* Causes a double free corruption in linux if device is detached! */
/* usb_device_close(*handlep); */
if (*handlep)
usb_close(*handlep);
#endif
#if WITH_LIBUSB_1_0
libusb_device **devlist;
ssize_t devcount = 0;
libusb_device_handle *handle;
struct libusb_device_descriptor dev_desc;
uint8_t bus;
int i;
devcount = libusb_get_device_list(NULL, &devlist);
if (devcount <= 0)
fatal_with_errno(EXIT_FAILURE, "No USB device found");
for (i = 0; i < devcount; i++) {
USBDeviceMatcher_t *m;
libusb_device *dev = devlist[i];
libusb_get_device_descriptor(dev, &dev_desc);
ret = libusb_open(dev, &handle);
*handlep = handle;
#else /* => WITH_LIBUSB_0_1 */
struct usb_bus *bus;
for (bus = usb_busses; bus; bus = bus->next) {
struct usb_device *dev;
usb_dev_handle *handle;
for (dev = bus->devices; dev; dev = dev->next) {
int i;
USBDeviceMatcher_t *m;
upsdebugx(3, "Checking USB device [%04x:%04x] (%s/%s)",
dev->descriptor.idVendor,
dev->descriptor.idProduct,
bus->dirname, dev->filename);
/* supported vendors are now checked by the supplied matcher */
/* open the device */
*handlep = handle = usb_open(dev);
#endif /* WITH_LIBUSB_1_0 */
if (!handle) {
upsdebugx(4, "Failed to open USB device, skipping: %s", nut_usb_strerror(ret));
continue;
}
/* collect the identifying information of this
device. Note that this is safe, because
there's no need to claim an interface for
this (and therefore we do not yet need to
detach any kernel drivers). */
free(device->Vendor);
free(device->Product);
free(device->Serial);
free(device->Bus);
memset(device, 0, sizeof(*device));
#if WITH_LIBUSB_1_0
device->VendorID = dev_desc.idVendor;
device->ProductID = dev_desc.idProduct;
bus = libusb_get_bus_number(dev);
device->Bus = (char *)malloc(4);
if (device->Bus == NULL) {
libusb_free_device_list(devlist, 1);
fatal_with_errno(EXIT_FAILURE, "Out of memory");
}
sprintf(device->Bus, "%03d", bus);
iManufacturer = dev_desc.iManufacturer;
iProduct = dev_desc.iProduct;
iSerialNumber = dev_desc.iSerialNumber;
#else /* => WITH_LIBUSB_0_1 */
device->VendorID = dev->descriptor.idVendor;
device->ProductID = dev->descriptor.idProduct;
device->Bus = xstrdup(bus->dirname);
iManufacturer = dev->descriptor.iManufacturer;
iProduct = dev->descriptor.iProduct;
iSerialNumber = dev->descriptor.iSerialNumber;
#endif /* WITH_LIBUSB_1_0 */
if (iManufacturer) {
char buf[SMALLBUF];
ret = usb_get_string_simple(handle, iManufacturer,
(usb_ctrl_charbuf)buf, sizeof(buf));
if (ret > 0) {
device->Vendor = strdup(buf);
if (device->Vendor == NULL) {
#if WITH_LIBUSB_1_0
libusb_free_device_list(devlist, 1);
#endif /* WITH_LIBUSB_1_0 */
fatal_with_errno(EXIT_FAILURE, "Out of memory");
}
}
}
if (iProduct) {
char buf[SMALLBUF];
ret = usb_get_string_simple(handle, iProduct,
(usb_ctrl_charbuf)buf, sizeof(buf));
if (ret > 0) {
device->Product = strdup(buf);
if (device->Product == NULL) {
#if WITH_LIBUSB_1_0
libusb_free_device_list(devlist, 1);
#endif /* WITH_LIBUSB_1_0 */
fatal_with_errno(EXIT_FAILURE, "Out of memory");
}
}
}
if (iSerialNumber) {
char buf[SMALLBUF];
ret = usb_get_string_simple(handle, iSerialNumber,
(usb_ctrl_charbuf)buf, sizeof(buf));
if (ret > 0) {
device->Serial = strdup(buf);
if (device->Serial == NULL) {
#if WITH_LIBUSB_1_0
libusb_free_device_list(devlist, 1);
#endif /* WITH_LIBUSB_1_0 */
fatal_with_errno(EXIT_FAILURE, "Out of memory");
}
}
}
upsdebugx(4, "- VendorID : %04x", device->VendorID);
upsdebugx(4, "- ProductID : %04x", device->ProductID);
upsdebugx(4, "- Manufacturer : %s", device->Vendor ? device->Vendor : "unknown");
upsdebugx(4, "- Product : %s", device->Product ? device->Product : "unknown");
upsdebugx(4, "- Serial Number: %s", device->Serial ? device->Serial : "unknown");
upsdebugx(4, "- Bus : %s", device->Bus ? device->Bus : "unknown");
for (m = matcher; m; m = m->next) {
switch (m->match_function(device, m->privdata))
{
case 0:
upsdebugx(4, "Device does not match - skipping");
goto next_device;
case -1:
#if WITH_LIBUSB_1_0
libusb_free_device_list(devlist, 1);
#endif /* WITH_LIBUSB_1_0 */
fatal_with_errno(EXIT_FAILURE, "matcher");
#ifndef HAVE___ATTRIBUTE__NORETURN
# if (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_PUSH_POP) && (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_UNREACHABLE_CODE)
# pragma GCC diagnostic push
# pragma GCC diagnostic ignored "-Wunreachable-code"
# endif
goto next_device;
# if (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_PUSH_POP) && (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_UNREACHABLE_CODE)
# pragma GCC diagnostic pop
# endif
#endif
case -2:
upsdebugx(4, "matcher: unspecified error");
goto next_device;
}
}
#ifdef HAVE_LIBUSB_SET_AUTO_DETACH_KERNEL_DRIVER
/* First, try the auto-detach kernel driver method
* This function is not available on FreeBSD 10.1-10.3 */
if ((ret = libusb_set_auto_detach_kernel_driver (udev, 1)) < 0)
upsdebugx(2, "failed to auto detach kernel driver from USB device: %s",
nut_usb_strerror((enum libusb_error)ret));
else
upsdebugx(2, "auto detached kernel driver from USB device");
#endif /* HAVE_LIBUSB_SET_AUTO_DETACH_KERNEL_DRIVER */
for (i = 0; i < 3; i++) {
ret = callback(handle, device);
if (ret >= 0) {
upsdebugx(3, "USB device [%04x:%04x] opened", device->VendorID, device->ProductID);
#if WITH_LIBUSB_1_0
libusb_free_device_list(devlist, 1);
#endif /* WITH_LIBUSB_1_0 */
return ret;
}
#if WITH_LIBUSB_0_1 && (defined HAVE_USB_DETACH_KERNEL_DRIVER_NP)
/* this method requires at least libusb 0.1.8:
* it forces device claiming by unbinding
* attached driver... From libhid */
if ((ret = usb_detach_kernel_driver_np(handle, 0)) < 0) {
upsdebugx(1,
"failed to detach kernel driver from USB device: %s",
nut_usb_strerror(ret));
} else {
upsdebugx(4, "detached kernel driver from USB device...");
}
#else
# ifdef HAVE_LIBUSB_DETACH_KERNEL_DRIVER
if ((ret = libusb_detach_kernel_driver(udev, 0)) < 0) {
upsdebugx(4,
"failed to detach kernel driver from USB device: %s",
nut_usb_strerror(ret));
} else {
upsdebugx(4, "detached kernel driver from USB device...");
}
# else
# ifdef HAVE_LIBUSB_DETACH_KERNEL_DRIVER_NP
if ((ret = libusb_detach_kernel_driver_np(udev, 0)) < 0) {
upsdebugx(4,
"failed to detach kernel driver from USB device: %s",
nut_usb_strerror(ret));
} else {
upsdebugx(4, "detached kernel driver from USB device...");
}
# endif /* HAVE_LIBUSB_DETACH_KERNEL_DRIVER_NP */
# endif /* HAVE_LIBUSB_DETACH_KERNEL_DRIVER */
#endif /* HAVE_USB_DETACH_KERNEL_DRIVER_NP or HAVE_LIBUSB_DETACH_KERNEL_DRIVER or HAVE_LIBUSB_DETACH_KERNEL_DRIVER_NP */
}
#if WITH_LIBUSB_1_0
libusb_free_device_list(devlist, 1);
#endif /* WITH_LIBUSB_1_0 */
fatalx(EXIT_FAILURE,
"USB device [%04x:%04x] matches, but driver callback failed: %s",
device->VendorID, device->ProductID,
nut_usb_strerror(ret));
next_device:
usb_close(handle);
#if (!WITH_LIBUSB_1_0) /* => WITH_LIBUSB_0_1 */
}
#endif /* WITH_LIBUSB_1_0 */
}
*handlep = NULL;
#if WITH_LIBUSB_1_0
libusb_free_device_list(devlist, 1);
#endif /* WITH_LIBUSB_1_0 */
upsdebugx(3, "No matching USB device found");
return -1;
}
/*
* Initialise the UPS
*/
void upsdrv_initups(void)
{
int i;
upsdebugx(1, "Searching for USB device...");
for (i = 0; usb_device_open(&udev, &usbdevice, &device_matcher, &driver_callback) < 0; i++) {
if ((i < 3) && (sleep(5) == 0)) {
usb_comm_fail("Can't open USB device, retrying ...");
continue;
}
fatalx(EXIT_FAILURE,
"Unable to find ATCL FOR UPS\n\n"
"Things to try:\n"
" - Connect UPS device to USB bus\n"
" - Run this driver as another user (upsdrvctl -u or 'user=...' in ups.conf).\n"
" See upsdrvctl(8) and ups.conf(5).\n\n"
"Fatal error: unusable configuration");
}
}
void upsdrv_cleanup(void)
{
usb_device_close(udev);
free(usbdevice.Vendor);
free(usbdevice.Product);
free(usbdevice.Serial);
free(usbdevice.Bus);
}
void upsdrv_initinfo(void)
{
dstate_setinfo("ups.mfr", "%s", usbdevice.Vendor ? usbdevice.Vendor : "unknown");
dstate_setinfo("ups.model", "%s", usbdevice.Product ? usbdevice.Product : "unknown");
if(usbdevice.Serial && usbdevice.Product && strcmp(usbdevice.Serial, usbdevice.Product)) {
/* Only set "ups.serial" if it isn't the same as "ups.model": */
dstate_setinfo("ups.serial", "%s", usbdevice.Serial);
}
dstate_setinfo("ups.vendorid", "%04x", usbdevice.VendorID);
dstate_setinfo("ups.productid", "%04x", usbdevice.ProductID);
}
void upsdrv_updateinfo(void)
{
char reply[STATUS_PACKETSIZE];
int ret;
if (!udev) {
ret = usb_device_open(&udev, &usbdevice, &device_matcher, &driver_callback);
if (ret < 0) {
return;
}
}
ret = query_ups(reply);
if (ret != STATUS_PACKETSIZE) {
usb_comm_fail("Query to UPS failed");
dstate_datastale();
usb_device_close(udev);
udev = NULL;
return;
}
usb_comm_good();
dstate_dataok();
status_init();
switch(reply[0]) {
case 3:
upsdebugx(2, "reply[0] = 0x%02x -> OL", reply[0]);
status_set("OL");
break;
case 2:
upsdebugx(2, "reply[0] = 0x%02x -> LB", reply[0]);
status_set("LB");
goto fallthrough_LB_means_OB;
/* Note: the comment below existed for years, so wondering
* if this device CAN set independently LB and OB? */
/* fall through */
case 1:
fallthrough_LB_means_OB:
upsdebugx(2, "reply[0] = 0x%02x -> OB", reply[0]);
status_set("OB");
break;
default:
upslogx(LOG_ERR, "Unknown status: 0x%02x", reply[0]);
}
if(strnlen(reply + 1, 7) != 0) {
upslogx(LOG_NOTICE, "Status bytes 1-7 are not all zero");
}
status_commit();
}
/* If the UPS is on battery, it should shut down about 30 seconds after
* receiving this packet.
*/
void upsdrv_shutdown(void)
{
/* Not "const" because this mismatches arg type of usb_interrupt_write() */
char shutdown_packet[SHUTDOWN_PACKETSIZE] = { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
int ret;
upslogx(LOG_DEBUG,
"%s: attempting to call usb_interrupt_write(01 00 00 00 00 00 00 00)",
__func__);
ret = usb_interrupt_write(udev,
SHUTDOWN_ENDPOINT, (usb_ctrl_charbuf)shutdown_packet,
SHUTDOWN_PACKETSIZE, ATCL_USB_TIMEOUT);
if (ret <= 0) {
upslogx(LOG_NOTICE,
"%s: first usb_interrupt_write() failed: %s",
__func__,
ret ? nut_usb_strerror(ret) : "timeout");
}
/* Totally guessing from the .pcap file here. TODO: configurable delay? */
usleep(170*1000);
ret = usb_interrupt_write(udev,
SHUTDOWN_ENDPOINT, (usb_ctrl_charbuf)shutdown_packet,
SHUTDOWN_PACKETSIZE, ATCL_USB_TIMEOUT);
if (ret <= 0) {
upslogx(LOG_ERR,
"%s: second usb_interrupt_write() failed: %s",
__func__,
ret ? nut_usb_strerror(ret) : "timeout");
}
}
void upsdrv_help(void)
{
}
void upsdrv_makevartable(void)
{
addvar(VAR_VALUE, "vendor", "USB vendor string (or NULL if none)");
}