601 lines
13 KiB
Plaintext
601 lines
13 KiB
Plaintext
Network protocol information
|
|
============================
|
|
|
|
Since May 2002, this protocol has an official port number from IANA,
|
|
which is *3493*. The old number (3305) was a relic of the original code's
|
|
ancestry, and conflicted with other services. Version 0.50.0 and up
|
|
use 3493 by default.
|
|
|
|
This protocol runs over TCP. UDP support was dropped in July 2003. It
|
|
had been deprecated for some time and was only capable of the simplest
|
|
query commands as authentication is impossible over a UDP socket.
|
|
|
|
A library, named libupsclient, that implement this protocol is provided
|
|
in both static and shared version to help the client application development.
|
|
|
|
Old command removal notice
|
|
--------------------------
|
|
|
|
Before version 1.5.0, a number of old commands were supported. These
|
|
have been removed from the specification. For more information, consult
|
|
an older version of the software.
|
|
|
|
Command reference
|
|
-----------------
|
|
|
|
Multi-word elements are contained within "quotes" for easier parsing.
|
|
Embedded quotes are escaped with backslashes. Embedded backslashes are
|
|
also escaped by representing them as \\. This protocol is intended to
|
|
be interpreted with parseconf (NUT parser) or something similar.
|
|
|
|
GET
|
|
---
|
|
|
|
Retrieve a single response from the server.
|
|
|
|
Possible sub-commands:
|
|
|
|
NUMLOGINS
|
|
~~~~~~~~~
|
|
|
|
Form:
|
|
|
|
GET NUMLOGINS <upsname>
|
|
GET NUMLOGINS su700
|
|
|
|
Response:
|
|
|
|
NUMLOGINS <upsname> <value>
|
|
NUMLOGINS su700 1
|
|
|
|
'<value>' is the number of clients which have done LOGIN for this UPS.
|
|
This is used by the master upsmon to determine how many clients are
|
|
still connected when starting the shutdown process.
|
|
|
|
This replaces the old "REQ NUMLOGINS" command.
|
|
|
|
UPSDESC
|
|
~~~~~~~
|
|
|
|
Form:
|
|
|
|
GET UPSDESC <upsname>
|
|
GET UPSDESC su700
|
|
|
|
Response:
|
|
|
|
UPSDESC <upsname> "<description>"
|
|
UPSDESC su700 "Development box"
|
|
|
|
'<description>' is the value of "desc=" from ups.conf for this UPS. If it
|
|
is not set, upsd will return "Unavailable".
|
|
|
|
This can be used to provide human-readable descriptions instead of a
|
|
cryptic "upsname@hostname" string.
|
|
|
|
VAR
|
|
~~~
|
|
|
|
Form:
|
|
|
|
GET VAR <upsname> <varname>
|
|
GET VAR su700 ups.status
|
|
|
|
Response:
|
|
|
|
VAR <upsname> <varname> "<value>"
|
|
VAR su700 ups.status "OL"
|
|
|
|
This replaces the old "REQ" command.
|
|
|
|
TYPE
|
|
~~~~
|
|
|
|
Form:
|
|
|
|
GET TYPE <upsname> <varname>
|
|
GET TYPE su700 input.transfer.low
|
|
|
|
Response:
|
|
|
|
TYPE <upsname> <varname> <type>...
|
|
TYPE su700 input.transfer.low ENUM
|
|
|
|
'<type>' can be several values, and multiple words may be returned:
|
|
|
|
- 'RW': this variable may be set to another value with SET
|
|
- 'ENUM': an enumerated type, which supports a few specific values
|
|
- 'STRING:n': this is a string of maximum length n
|
|
|
|
ENUM and STRING are usually associated with RW, but not always.
|
|
|
|
This replaces the old "VARTYPE" command.
|
|
|
|
DESC
|
|
~~~~
|
|
|
|
Form:
|
|
|
|
GET DESC <upsname> <varname>
|
|
GET DESC su700 ups.status
|
|
|
|
Response:
|
|
|
|
DESC <upsname> <varname> "<description>"
|
|
DESC su700 ups.status "UPS status"
|
|
|
|
'<description>' is a string that gives a brief explanation of the named
|
|
variable. upsd may return "Unavailable" if the file which provides this
|
|
description is not installed.
|
|
|
|
Different versions of this file may be used in some situations to
|
|
provide for localization and internationalization.
|
|
|
|
This replaces the old "VARDESC" command.
|
|
|
|
CMDDESC
|
|
~~~~~~~
|
|
|
|
Form:
|
|
|
|
GET CMDDESC <upsname> <cmdname>
|
|
GET CMDDESC su700 load.on
|
|
|
|
Response:
|
|
|
|
CMDDESC <upsname> <cmdname> "<description>"
|
|
CMDDESC su700 load.on "Turn on the load immediately"
|
|
|
|
This is like DESC above, but it applies to the instant commands.
|
|
|
|
This replaces the old "INSTCMDDESC" command.
|
|
|
|
LIST
|
|
----
|
|
|
|
The LIST functions all share a common container format. They will
|
|
return "BEGIN LIST" and then repeat the initial query. The list then
|
|
follows, with as many lines are necessary to convey it. "END LIST" with
|
|
the initial query attached then follows.
|
|
|
|
The formatting may seem a bit redundant, but it makes a different form
|
|
of client possible. You can send a LIST query and then go off and wait
|
|
for it to get back to you. When it arrives, you don't need complicated
|
|
state machines to remember which list is which.
|
|
|
|
UPS
|
|
~~~
|
|
|
|
Form:
|
|
|
|
LIST UPS
|
|
|
|
Response:
|
|
|
|
BEGIN LIST UPS
|
|
UPS <upsname> "<description>"
|
|
...
|
|
END LIST UPS
|
|
|
|
BEGIN LIST UPS
|
|
UPS su700 "Development box"
|
|
END LIST UPS
|
|
|
|
'<upsname>' is a name from ups.conf, and <description> is the value of
|
|
desc= from ups.conf, if available. It will be set to "Unavailable"
|
|
otherwise.
|
|
|
|
This can be used to determine what values of <upsname> are valid before
|
|
calling other functions on the server. This is also a good way to
|
|
handle situations where a single upsd supports multiple drivers.
|
|
|
|
Clients which perform a UPS discovery process may find this useful.
|
|
|
|
VAR
|
|
~~~
|
|
|
|
Form:
|
|
|
|
LIST VAR <upsname>
|
|
LIST VAR su700
|
|
|
|
Response:
|
|
|
|
BEGIN LIST VAR <upsname>
|
|
VAR <upsname> <varname> "<value>"
|
|
...
|
|
END LIST VAR <upsname>
|
|
|
|
BEGIN LIST VAR su700
|
|
VAR su700 ups.mfr "APC"
|
|
VAR su700 ups.mfr.date "10/17/96"
|
|
...
|
|
END LIST VAR su700
|
|
|
|
This replaces the old "LISTVARS" command.
|
|
|
|
RW
|
|
~~
|
|
|
|
Form:
|
|
|
|
LIST RW <upsname>
|
|
LIST RW su700
|
|
|
|
Response:
|
|
|
|
BEGIN LIST RW <upsname>
|
|
RW <upsname> <varname> "<value>"
|
|
...
|
|
END LIST RW <upsname>
|
|
|
|
BEGIN LIST RW su700
|
|
RW su700 output.voltage.nominal "115"
|
|
RW su700 ups.delay.shutdown "020"
|
|
...
|
|
END LIST RW su700
|
|
|
|
This replaces the old "LISTRW" command.
|
|
|
|
CMD
|
|
~~~
|
|
|
|
Form:
|
|
|
|
LIST CMD <upsname>
|
|
LIST CMD su700
|
|
|
|
Response:
|
|
|
|
BEGIN LIST CMD <upsname>
|
|
CMD <upsname> <cmdname>
|
|
...
|
|
END LIST CMD <cmdname>
|
|
|
|
BEGIN LIST CMD su700
|
|
CMD su700 load.on
|
|
CMD su700 test.panel.start
|
|
...
|
|
END LIST CMD su700
|
|
|
|
This replaces the old "LISTINSTCMD" command.
|
|
|
|
ENUM
|
|
~~~~
|
|
|
|
Form:
|
|
|
|
LIST ENUM <upsname> <varname>
|
|
LIST ENUM su700 input.transfer.low
|
|
|
|
Response:
|
|
|
|
BEGIN LIST ENUM <upsname> <varname>
|
|
ENUM <upsname> <varname> "<value>"
|
|
...
|
|
END LIST ENUM <upsname> <varname>
|
|
|
|
BEGIN LIST ENUM su700 input.transfer.low
|
|
ENUM su700 input.transfer.low "103"
|
|
ENUM su700 input.transfer.low "100"
|
|
...
|
|
END LIST ENUM su700 input.transfer.low
|
|
|
|
This replaces the old "ENUM" command.
|
|
|
|
NOTE: this does not support the old "SELECTED" notation. You must
|
|
request the current value separately.
|
|
|
|
SET
|
|
---
|
|
|
|
Form:
|
|
|
|
SET VAR <upsname> <varname> "<value>"
|
|
SET VAR su700 ups.id "My UPS"
|
|
|
|
INSTCMD
|
|
-------
|
|
|
|
Form:
|
|
|
|
INSTCMD <upsname> <cmdname>
|
|
INSTCMD su700 test.panel.start
|
|
|
|
LOGOUT
|
|
------
|
|
|
|
Form:
|
|
|
|
LOGOUT
|
|
|
|
Response:
|
|
|
|
OK Goodbye (recent versions)
|
|
Goodbye... (older versions)
|
|
|
|
Used to disconnect gracefully from the server.
|
|
|
|
LOGIN
|
|
-----
|
|
|
|
Form:
|
|
|
|
LOGIN <upsname>
|
|
|
|
Response:
|
|
|
|
OK (upon success)
|
|
or <<np-errors,various errors>>
|
|
|
|
NOTE: This requires "upsmon slave" or "upsmon master" in upsd.users
|
|
|
|
Use this to log the fact that a system is drawing power from this UPS.
|
|
The upsmon master will wait until the count of attached systems reaches
|
|
1 - itself. This allows the slaves to shut down first.
|
|
|
|
NOTE: You probably shouldn't send this command unless you are upsmon,
|
|
or a upsmon replacement.
|
|
|
|
MASTER
|
|
------
|
|
|
|
Form:
|
|
|
|
MASTER <upsname>
|
|
|
|
Response:
|
|
|
|
OK (upon success)
|
|
or <<np-errors,various errors>>
|
|
|
|
NOTE: This requires "upsmon master" in upsd.users
|
|
|
|
This function doesn't do much by itself. It is used by upsmon to make
|
|
sure that master-level functions like FSD are available if necessary.
|
|
|
|
FSD
|
|
---
|
|
|
|
Form:
|
|
|
|
FSD <upsname>
|
|
|
|
Response:
|
|
|
|
OK FSD-SET (success)
|
|
or <<np-errors,various errors>>
|
|
|
|
NOTE: This requires "upsmon master" in upsd.users, or "FSD" action
|
|
granted in upsd.users
|
|
|
|
upsmon in master mode is the primary user of this function. It sets this
|
|
"forced shutdown" flag on any UPS when it plans to power it off. This is
|
|
done so that slave systems will know about it and shut down before the
|
|
power disappears.
|
|
|
|
Setting this flag makes "FSD" appear in a STATUS request for this UPS.
|
|
Finding "FSD" in a status request should be treated just like a "OB LB".
|
|
|
|
It should be noted that FSD is currently a latch - once set, there is
|
|
no way to clear it short of restarting upsd or dropping then re-adding
|
|
it in the ups.conf. This may cause issues when upsd is running on a
|
|
system that is not shut down due to the UPS event.
|
|
|
|
PASSWORD
|
|
--------
|
|
|
|
Form:
|
|
|
|
PASSWORD <password>
|
|
|
|
Response:
|
|
|
|
OK (upon success)
|
|
or <<np-errors,various errors>>
|
|
|
|
Sets the password associated with a connection. Used for later
|
|
authentication for commands that require it.
|
|
|
|
USERNAME
|
|
--------
|
|
|
|
Form:
|
|
|
|
USERNAME <username>
|
|
|
|
Response:
|
|
|
|
OK (upon success)
|
|
or <<np-errors,various errors>>
|
|
|
|
Sets the username associated with a connection. This is also used for
|
|
authentication, specifically in conjunction with the upsd.users file.
|
|
|
|
STARTTLS
|
|
--------
|
|
|
|
Form:
|
|
|
|
STARTTLS
|
|
|
|
Response:
|
|
|
|
OK STARTTLS
|
|
or <<np-errors,various errors>>
|
|
|
|
This tells upsd to switch to TLS mode internally, so all future
|
|
communications will be encrypted. You must also change to TLS mode in
|
|
the client after receiving the OK, or the connection will be useless.
|
|
|
|
Other commands
|
|
--------------
|
|
|
|
- HELP: lists the commands supported by this server
|
|
- VER: shows the version of the server currently in use
|
|
|
|
These two are not intended to be used directly by programs. Humans can
|
|
make use of this program by using telnet or netcat. If you use
|
|
telnet, make sure you don't have it set to negotiate extra options.
|
|
upsd doesn't speak telnet and will probably misunderstand your first
|
|
request due to the extra junk in the buffer.
|
|
|
|
Error responses
|
|
---------------
|
|
|
|
An error response has the following format:
|
|
|
|
ERR <message> [<extra>...]
|
|
|
|
<message> is always one element; it never contains spaces. This may
|
|
be used to allow additional information (<extra>) in the future.
|
|
|
|
<message> can have the following values:
|
|
|
|
- 'ACCESS-DENIED'
|
|
+
|
|
The client's host and/or authentication details (username, password)
|
|
are not sufficient to execute the requested command.
|
|
|
|
- 'UNKNOWN-UPS'
|
|
+
|
|
The UPS specified in the request is not known to upsd. This usually
|
|
means that it didn't match anything in ups.conf.
|
|
|
|
- 'VAR-NOT-SUPPORTED'
|
|
+
|
|
The specified UPS doesn't support the variable in the request.
|
|
+
|
|
This is also sent for unrecognized variables which are in a space
|
|
which is handled by upsd, such as server.*.
|
|
|
|
- 'CMD-NOT-SUPPORTED'
|
|
+
|
|
The specified UPS doesn't support the instant command in the request.
|
|
|
|
- 'INVALID-ARGUMENT'
|
|
+
|
|
The client sent an argument to a command which is not recognized or
|
|
is otherwise invalid in this context. This is typically caused by
|
|
sending a valid command like GET with an invalid subcommand.
|
|
|
|
- 'INSTCMD-FAILED'
|
|
+
|
|
upsd failed to deliver the instant command request to the driver.
|
|
No further information is available to the client. This typically
|
|
indicates a dead or broken driver.
|
|
|
|
- 'SET-FAILED'
|
|
+
|
|
upsd failed to deliver the set request to the driver. This is
|
|
just like INSTCMD-FAILED above.
|
|
|
|
- 'READONLY'
|
|
+
|
|
The requested variable in a SET command is not writable.
|
|
|
|
- 'TOO-LONG'
|
|
+
|
|
The requested value in a SET command is too long.
|
|
|
|
- 'FEATURE-NOT-SUPPORTED'
|
|
+
|
|
This instance of upsd does not support the requested feature. This
|
|
is only used for TLS/SSL mode (STARTTLS) at the moment.
|
|
|
|
- 'FEATURE-NOT-CONFIGURED'
|
|
+
|
|
This instance of upsd hasn't been configured properly to allow the
|
|
requested feature to operate. This is also limited to STARTTLS for now.
|
|
|
|
- 'ALREADY-SSL-MODE'
|
|
+
|
|
TLS/SSL mode is already enabled on this connection, so upsd can't
|
|
start it again.
|
|
|
|
- 'DRIVER-NOT-CONNECTED'
|
|
+
|
|
upsd can't perform the requested command, since the driver for that
|
|
UPS is not connected. This usually means that the driver is not
|
|
running, or if it is, the ups.conf is misconfigured.
|
|
|
|
- 'DATA-STALE'
|
|
+
|
|
upsd is connected to the driver for the UPS, but that driver isn't
|
|
providing regular updates or has specifically marked the data
|
|
as stale. upsd refuses to provide variables on stale units to avoid
|
|
false readings.
|
|
+
|
|
This generally means that the driver is running, but it has lost
|
|
communications with the hardware. Check the physical connection
|
|
to the equipment.
|
|
|
|
- 'ALREADY-LOGGED-IN'
|
|
+
|
|
The client already sent LOGIN for a UPS and can't do it again.
|
|
There is presently a limit of one LOGIN record per connection.
|
|
|
|
- 'INVALID-PASSWORD'
|
|
+
|
|
The client sent an invalid PASSWORD - perhaps an empty one.
|
|
|
|
- 'ALREADY-SET-PASSWORD'
|
|
+
|
|
The client already set a PASSWORD and can't set another. This also
|
|
should never happen with normal NUT clients.
|
|
|
|
- 'INVALID-USERNAME'
|
|
+
|
|
The client sent an invalid USERNAME.
|
|
|
|
- 'ALREADY-SET-USERNAME'
|
|
+
|
|
The client has already set a USERNAME, and can't set another. This
|
|
should never happen with normal NUT clients.
|
|
|
|
- 'USERNAME-REQUIRED'
|
|
+
|
|
The requested command requires a username for authentication,
|
|
but the client hasn't set one.
|
|
|
|
- 'PASSWORD-REQUIRED'
|
|
+
|
|
The requested command requires a passname for authentication,
|
|
but the client hasn't set one.
|
|
|
|
- 'UNKNOWN-COMMAND'
|
|
+
|
|
upsd doesn't recognize the requested command.
|
|
+
|
|
This can be useful for backwards compatibility with older versions
|
|
of upsd. Some NUT clients will try GET and fall back on REQ after
|
|
receiving this response.
|
|
|
|
- 'INVALID-VALUE'
|
|
+
|
|
The value specified in the request is not valid. This usually
|
|
applies to a SET of an ENUM type which is using a value which is
|
|
not in the list of allowed values.
|
|
|
|
Future ideas
|
|
------------
|
|
|
|
Dense lists
|
|
~~~~~~~~~~~
|
|
|
|
The LIST commands may be given the ability to handle options some day.
|
|
For example, "LIST VARS <ups> +DESC" would return the current value
|
|
like now, but it would also append the description of that variable.
|
|
|
|
Command status
|
|
~~~~~~~~~~~~~~
|
|
|
|
After sending an INSTCMD or SET, a client will eventually be able to
|
|
poll to see whether it was completed successfully by the driver.
|
|
|
|
Get collection
|
|
~~~~~~~~~~~~~~
|
|
|
|
Allow to request only a subtree, which can be a collection, or a sub
|
|
collection.
|