364 lines
13 KiB
Makefile
364 lines
13 KiB
Makefile
# Network UPS Tools: drivers
|
|
|
|
# Make sure out-of-dir dependencies exist (especially when dev-building parts):
|
|
$(top_builddir)/common/libcommon.la \
|
|
$(top_builddir)/common/libparseconf.la \
|
|
$(top_builddir)/clients/libupsclient.la: dummy
|
|
@cd $(@D) && $(MAKE) $(AM_MAKEFLAGS) $(@F)
|
|
|
|
# by default, link programs in this directory with libcommon.la
|
|
# (libtool version of the static lib, in order to access LTLIBOBJS)
|
|
#FIXME: SERLIBS is only useful for LDADD_DRIVERS_SERIAL not for LDADD_COMMON
|
|
LDADD_COMMON = $(top_builddir)/common/libcommon.la $(top_builddir)/common/libparseconf.la
|
|
LDADD_DRIVERS = libdummy.la $(LDADD_COMMON)
|
|
LDADD_DRIVERS_SERIAL = libdummy_serial.la $(LDADD_DRIVERS) $(SERLIBS)
|
|
|
|
# most targets are drivers, so make this the default
|
|
LDADD = $(LDADD_DRIVERS_SERIAL)
|
|
# Avoid per-target CFLAGS, because this will prevent re-use of object
|
|
# files. In any case, CFLAGS are only -I options, so there is no harm,
|
|
# but only add them if we really use the target.
|
|
AM_CFLAGS = -I$(top_srcdir)/include
|
|
if WITH_USB
|
|
AM_CFLAGS += $(LIBUSB_CFLAGS)
|
|
endif
|
|
if WITH_NEON
|
|
AM_CFLAGS += $(LIBNEON_CFLAGS)
|
|
endif
|
|
if WITH_LIBPOWERMAN
|
|
AM_CFLAGS += $(LIBPOWERMAN_CFLAGS)
|
|
endif
|
|
if WITH_IPMI
|
|
AM_CFLAGS += $(LIBIPMI_CFLAGS)
|
|
endif
|
|
if WITH_MODBUS
|
|
AM_CFLAGS += $(LIBMODBUS_CFLAGS)
|
|
endif
|
|
|
|
SERIAL_DRIVERLIST = al175 bcmxcp belkin belkinunv bestfcom \
|
|
bestfortress bestuferrups bestups dummy-ups etapro everups \
|
|
gamatronic genericups isbmex liebert liebert-esp2 masterguard metasys \
|
|
mge-utalk microdowell microsol-apc mge-shut oneac optiups powercom rhino \
|
|
safenet nutdrv_siemens-sitop skel solis tripplite tripplitesu upscode2 victronups powerpanel \
|
|
blazer_ser clone clone-outlet ivtscd apcsmart apcsmart-old apcupsd-ups riello_ser
|
|
SNMP_DRIVERLIST = snmp-ups
|
|
USB_LIBUSB_DRIVERLIST = usbhid-ups bcmxcp_usb tripplite_usb \
|
|
blazer_usb richcomm_usb riello_usb \
|
|
nutdrv_atcl_usb
|
|
USB_DRIVERLIST = $(USB_LIBUSB_DRIVERLIST)
|
|
SERIAL_USB_DRIVERLIST = \
|
|
nutdrv_qx
|
|
NEONXML_DRIVERLIST = netxml-ups
|
|
MACOSX_DRIVERLIST = macosx-ups
|
|
MODBUS_DRIVERLIST = phoenixcontact_modbus generic_modbus huawei-ups2000 socomec_jbus adelsystem_cbi
|
|
LINUX_I2C_DRIVERLIST = asem pijuice
|
|
POWERMAN_DRIVERLIST = powerman-pdu
|
|
IPMI_DRIVERLIST = nut-ipmipsu
|
|
|
|
# distribute all drivers, even ones that are not built by default
|
|
EXTRA_PROGRAMS = $(SERIAL_DRIVERLIST) $(USB_DRIVERLIST) $(SERIAL_USB_DRIVERLIST)
|
|
EXTRA_PROGRAMS += $(SNMP_DRIVERLIST) $(NEONXML_DRIVERLIST) $(MACOSX_DRIVERLIST)
|
|
EXTRA_PROGRAMS += $(LINUX_I2C_DRIVERLIST)
|
|
|
|
# construct the list of drivers to build
|
|
if SOME_DRIVERS
|
|
driverexec_PROGRAMS = $(DRIVER_BUILD_LIST)
|
|
else
|
|
driverexec_PROGRAMS =
|
|
if WITH_SERIAL
|
|
driverexec_PROGRAMS += $(SERIAL_DRIVERLIST) $(SERIAL_USB_DRIVERLIST)
|
|
else
|
|
if WITH_USB
|
|
driverexec_PROGRAMS += $(SERIAL_USB_DRIVERLIST)
|
|
endif
|
|
endif
|
|
if WITH_SNMP
|
|
driverexec_PROGRAMS += $(SNMP_DRIVERLIST)
|
|
endif
|
|
if WITH_USB
|
|
driverexec_PROGRAMS += $(USB_LIBUSB_DRIVERLIST)
|
|
endif
|
|
if WITH_NEON
|
|
driverexec_PROGRAMS += $(NEONXML_DRIVERLIST)
|
|
endif
|
|
if WITH_LIBPOWERMAN
|
|
driverexec_PROGRAMS += $(POWERMAN_DRIVERLIST)
|
|
endif
|
|
if WITH_IPMI
|
|
driverexec_PROGRAMS += $(IPMI_DRIVERLIST)
|
|
endif
|
|
if WITH_MACOSX
|
|
driverexec_PROGRAMS += $(MACOSX_DRIVERLIST)
|
|
endif
|
|
if WITH_LINUX_I2C
|
|
driverexec_PROGRAMS += $(LINUX_I2C_DRIVERLIST)
|
|
endif
|
|
if WITH_MODBUS
|
|
driverexec_PROGRAMS += $(MODBUS_DRIVERLIST)
|
|
endif
|
|
else
|
|
driverexec_PROGRAMS += skel
|
|
endif
|
|
|
|
# always build upsdrvctl
|
|
sbin_PROGRAMS = upsdrvctl
|
|
|
|
# ==========================================================================
|
|
# Driver build details
|
|
|
|
# upsdrvctl: the all-singing all-dancing driver control program
|
|
upsdrvctl_SOURCES = upsdrvctl.c
|
|
upsdrvctl_LDADD = $(LDADD_COMMON)
|
|
|
|
# serial drivers: all of them use standard LDADD and CFLAGS
|
|
al175_SOURCES = al175.c
|
|
apcsmart_SOURCES = apcsmart.c apcsmart_tabs.c
|
|
apcsmart_old_SOURCES = apcsmart-old.c
|
|
bcmxcp_SOURCES = bcmxcp.c bcmxcp_ser.c
|
|
bcmxcp_LDADD = $(LDADD) -lm
|
|
belkin_SOURCES = belkin.c
|
|
belkinunv_SOURCES = belkinunv.c
|
|
bestfcom_SOURCES = bestfcom.c
|
|
bestfortress_SOURCES = bestfortress.c
|
|
bestuferrups_SOURCES = bestuferrups.c
|
|
bestups_SOURCES = bestups.c
|
|
blazer_ser_SOURCES = blazer.c blazer_ser.c
|
|
blazer_ser_LDADD = $(LDADD) -lm
|
|
etapro_SOURCES = etapro.c
|
|
everups_SOURCES = everups.c
|
|
gamatronic_SOURCES = gamatronic.c
|
|
genericups_SOURCES = genericups.c
|
|
isbmex_SOURCES = isbmex.c
|
|
isbmex_LDADD = $(LDADD) -lm
|
|
ivtscd_SOURCES = ivtscd.c
|
|
liebert_SOURCES = liebert.c
|
|
liebert_esp2_SOURCES = liebert-esp2.c
|
|
masterguard_SOURCES = masterguard.c
|
|
metasys_SOURCES = metasys.c
|
|
metasys_LDADD = $(LDADD) -lm
|
|
mge_utalk_SOURCES = mge-utalk.c
|
|
microdowell_SOURCES = microdowell.c
|
|
microsol_apc_SOURCES = microsol-apc.c microsol-common.c
|
|
microsol_apc_LDADD = $(LDADD) -lm
|
|
oneac_SOURCES = oneac.c
|
|
optiups_SOURCES = optiups.c
|
|
powercom_SOURCES = powercom.c
|
|
powercom_LDADD = $(LDADD) -lm
|
|
powerpanel_SOURCES = powerpanel.c powerp-bin.c powerp-txt.c
|
|
powerpanel_LDADD = $(LDADD) -lm
|
|
rhino_SOURCES = rhino.c
|
|
rhino_LDADD = $(LDADD) -lm
|
|
safenet_SOURCES = safenet.c
|
|
nutdrv_siemens_sitop_SOURCES = nutdrv_siemens_sitop.c
|
|
solis_SOURCES = solis.c
|
|
solis_LDADD = $(LDADD) -lm
|
|
tripplite_SOURCES = tripplite.c
|
|
tripplite_LDADD = $(LDADD) -lm
|
|
tripplitesu_SOURCES = tripplitesu.c
|
|
upscode2_SOURCES = upscode2.c
|
|
upscode2_LDADD = $(LDADD) -lm
|
|
victronups_SOURCES = victronups.c
|
|
riello_ser_SOURCES = riello.c riello_ser.c
|
|
riello_ser_LDADD = $(LDADD) -lm
|
|
|
|
# non-serial drivers: these use custom LDADD and/or CFLAGS
|
|
|
|
# dummy
|
|
dummy_ups_SOURCES = dummy-ups.c
|
|
dummy_ups_CFLAGS = $(AM_CFLAGS) -I$(top_srcdir)/clients
|
|
dummy_ups_LDADD = $(LDADD_DRIVERS) $(top_builddir)/clients/libupsclient.la
|
|
if WITH_SSL
|
|
dummy_ups_CFLAGS += $(LIBSSL_CFLAGS)
|
|
dummy_ups_LDADD += $(LIBSSL_LIBS)
|
|
endif
|
|
|
|
# Clone drivers
|
|
clone_SOURCES = clone.c
|
|
clone_outlet_SOURCES = clone-outlet.c
|
|
|
|
# apcupsd client driver
|
|
apcupsd_ups_SOURCES = apcupsd-ups.c
|
|
apcupsd_ups_CFLAGS = $(AM_CFLAGS)
|
|
apcupsd_ups_LDADD = $(LDADD_DRIVERS)
|
|
|
|
# sample skeleton driver
|
|
|
|
skel_SOURCES = skel.c
|
|
skel_LDADD = $(LDADD_DRIVERS)
|
|
|
|
# USB
|
|
if WITH_LIBUSB_0_1
|
|
LIBUSB_IMPL = libusb0.c
|
|
endif
|
|
if WITH_LIBUSB_1_0
|
|
LIBUSB_IMPL = libusb1.c
|
|
endif
|
|
USBHID_UPS_SUBDRIVERS = apc-hid.c arduino-hid.c belkin-hid.c cps-hid.c explore-hid.c \
|
|
liebert-hid.c mge-hid.c powercom-hid.c tripplite-hid.c idowell-hid.c \
|
|
openups-hid.c powervar-hid.c delta_ups-hid.c ever-hid.c legrand-hid.c salicru-hid.c rpi-hid.c
|
|
usbhid_ups_SOURCES = usbhid-ups.c libhid.c $(LIBUSB_IMPL) hidparser.c \
|
|
usb-common.c $(USBHID_UPS_SUBDRIVERS)
|
|
usbhid_ups_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
|
|
|
|
tripplite_usb_SOURCES = tripplite_usb.c $(LIBUSB_IMPL) usb-common.c
|
|
tripplite_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
|
|
|
|
bcmxcp_usb_SOURCES = bcmxcp_usb.c bcmxcp.c usb-common.c
|
|
bcmxcp_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
|
|
|
|
blazer_usb_SOURCES = blazer.c blazer_usb.c $(LIBUSB_IMPL) usb-common.c
|
|
blazer_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
|
|
|
|
nutdrv_atcl_usb_SOURCES = nutdrv_atcl_usb.c usb-common.c
|
|
nutdrv_atcl_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS)
|
|
|
|
richcomm_usb_SOURCES = richcomm_usb.c usb-common.c
|
|
richcomm_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS)
|
|
|
|
riello_usb_SOURCES = riello.c riello_usb.c $(LIBUSB_IMPL) usb-common.c
|
|
riello_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
|
|
|
|
# HID-over-serial
|
|
mge_shut_SOURCES = usbhid-ups.c libshut.c libhid.c hidparser.c mge-hid.c
|
|
# per-target CFLAGS are necessary here
|
|
mge_shut_CFLAGS = $(AM_CFLAGS) -DSHUT_MODE=1
|
|
mge_shut_LDADD = $(LDADD) -lm
|
|
|
|
# SNMP
|
|
# Please keep the MIB table below sorted roughly alphabetically (incidentally
|
|
# by vendor too) to ease maintenance and codebase fork resynchronisations
|
|
snmp_ups_SOURCES = snmp-ups.c snmp-ups-helpers.c \
|
|
apc-mib.c apc-pdu-mib.c \
|
|
baytech-mib.c bestpower-mib.c \
|
|
compaq-mib.c cyberpower-mib.c \
|
|
delta_ups-mib.c \
|
|
eaton-pdu-genesis2-mib.c eaton-pdu-marlin-mib.c eaton-pdu-marlin-helpers.c \
|
|
eaton-pdu-pulizzi-mib.c eaton-pdu-revelation-mib.c \
|
|
eaton-ats16-nmc-mib.c eaton-ats16-nm2-mib.c apc-ats-mib.c eaton-ats30-mib.c \
|
|
emerson-avocent-pdu-mib.c \
|
|
hpe-pdu-mib.c huawei-mib.c \
|
|
ietf-mib.c \
|
|
mge-mib.c \
|
|
netvision-mib.c \
|
|
powerware-mib.c \
|
|
raritan-pdu-mib.c raritan-px2-mib.c \
|
|
xppc-mib.c
|
|
snmp_ups_CFLAGS = $(AM_CFLAGS)
|
|
snmp_ups_CFLAGS += $(LIBNETSNMP_CFLAGS)
|
|
snmp_ups_LDADD = $(LDADD_DRIVERS) $(LIBNETSNMP_LIBS) -lm
|
|
|
|
# NEON XML/HTTP
|
|
netxml_ups_SOURCES = netxml-ups.c mge-xml.c
|
|
netxml_ups_LDADD = $(LDADD_DRIVERS) $(LIBNEON_LIBS)
|
|
|
|
# Powerman
|
|
powerman_pdu_SOURCES = powerman-pdu.c
|
|
powerman_pdu_LDADD = $(LDADD) $(LIBPOWERMAN_LIBS)
|
|
|
|
# IPMI PSU
|
|
nut_ipmipsu_SOURCES = nut-ipmipsu.c
|
|
if WITH_FREEIPMI
|
|
nut_ipmipsu_SOURCES += nut-libfreeipmi.c
|
|
endif
|
|
# FIXME: Hacky hot-fix for build agents of varying OS generations:
|
|
# Different versions of IPMI libs requested 'unsigned int *' or 'int *' args:
|
|
#nut_ipmipsu_CFLAGS = $(AM_CFLAGS) -Wno-pointer-sign
|
|
nut_ipmipsu_LDADD = $(LDADD) $(LIBIPMI_LIBS)
|
|
|
|
# Mac OS X metadriver
|
|
macosx_ups_LDADD = $(LDADD_DRIVERS)
|
|
macosx_ups_LDFLAGS = $(LDFLAGS) -framework IOKit -framework CoreFoundation
|
|
macosx_ups_SOURCES = macosx-ups.c
|
|
|
|
# Modbus drivers
|
|
phoenixcontact_modbus_SOURCES = phoenixcontact_modbus.c
|
|
phoenixcontact_modbus_LDADD = $(LDADD_DRIVERS) $(LIBMODBUS_LIBS)
|
|
generic_modbus_SOURCES = generic_modbus.c
|
|
generic_modbus_LDADD = $(LDADD_DRIVERS) $(LIBMODBUS_LIBS)
|
|
adelsystem_cbi_SOURCES = adelsystem_cbi.c
|
|
adelsystem_cbi_LDADD = $(LDADD_DRIVERS) $(LIBMODBUS_LIBS)
|
|
|
|
# Huawei UPS2000 driver
|
|
# (this is both a Modbus and a serial driver)
|
|
huawei_ups2000_SOURCES = huawei-ups2000.c
|
|
huawei_ups2000_LDADD = $(LDADD_DRIVERS_SERIAL) $(LIBMODBUS_LIBS)
|
|
|
|
# Socomec JBUS driver
|
|
# (this is a Modbus driver)
|
|
socomec_jbus_SOURCES = socomec_jbus.c
|
|
socomec_jbus_LDADD = $(LDADD_DRIVERS_SERIAL) $(LIBMODBUS_LIBS)
|
|
|
|
# Linux I2C drivers
|
|
asem_LDADD = $(LDADD_DRIVERS)
|
|
asem_SOURCES = asem.c
|
|
pijuice_LDADD = $(LDADD_DRIVERS)
|
|
pijuice_SOURCES = pijuice.c
|
|
|
|
# nutdrv_qx USB/Serial
|
|
nutdrv_qx_SOURCES = nutdrv_qx.c
|
|
nutdrv_qx_LDADD = $(LDADD_DRIVERS) -lm
|
|
nutdrv_qx_CFLAGS = $(AM_CFLAGS)
|
|
if WITH_SERIAL
|
|
nutdrv_qx_CFLAGS += -DQX_SERIAL
|
|
nutdrv_qx_LDADD += libdummy_serial.la $(SERLIBS)
|
|
endif
|
|
if WITH_USB
|
|
nutdrv_qx_CFLAGS += -DQX_USB
|
|
nutdrv_qx_SOURCES += $(LIBUSB_IMPL) usb-common.c
|
|
nutdrv_qx_LDADD += $(LIBUSB_LIBS)
|
|
endif
|
|
NUTDRV_QX_SUBDRIVERS = nutdrv_qx_bestups.c nutdrv_qx_blazer-common.c \
|
|
nutdrv_qx_masterguard.c \
|
|
nutdrv_qx_mecer.c nutdrv_qx_megatec.c nutdrv_qx_megatec-old.c \
|
|
nutdrv_qx_mustek.c nutdrv_qx_q1.c nutdrv_qx_voltronic.c \
|
|
nutdrv_qx_voltronic-qs.c nutdrv_qx_voltronic-qs-hex.c nutdrv_qx_zinto.c \
|
|
nutdrv_qx_hunnox.c nutdrv_qx_ablerex.c
|
|
nutdrv_qx_SOURCES += $(NUTDRV_QX_SUBDRIVERS)
|
|
|
|
# ----------------------------------------------------------------------
|
|
# List of header files. The purpose of this list is not dependency
|
|
# tracking (which is automatic), but to ensure these files are
|
|
# distributed by "make dist".
|
|
|
|
dist_noinst_HEADERS = apc-mib.h apc-iem-mib.h apc-hid.h arduino-hid.h baytech-mib.h bcmxcp.h bcmxcp_ser.h \
|
|
bcmxcp_io.h belkin.h belkin-hid.h bestpower-mib.h blazer.h cps-hid.h dstate.h \
|
|
dummy-ups.h explore-hid.h gamatronic.h genericups.h \
|
|
hidparser.h hidtypes.h ietf-mib.h libhid.h libshut.h nut_libusb.h liebert-hid.h \
|
|
main.h mge-hid.h mge-mib.h mge-utalk.h \
|
|
mge-xml.h microdowell.h microsol-apc.h microsol-common.h netvision-mib.h netxml-ups.h nut-ipmi.h oneac.h \
|
|
powercom.h powerpanel.h powerp-bin.h powerp-txt.h powerware-mib.h raritan-pdu-mib.h \
|
|
safenet.h serial.h snmp-ups.h solis.h tripplite.h tripplite-hid.h \
|
|
upshandler.h usb-common.h usbhid-ups.h powercom-hid.h compaq-mib.h idowell-hid.h \
|
|
apcsmart.h apcsmart_tabs.h apcsmart-old.h apcupsd-ups.h cyberpower-mib.h riello.h openups-hid.h \
|
|
delta_ups-mib.h nutdrv_qx.h nutdrv_qx_bestups.h nutdrv_qx_blazer-common.h \
|
|
nutdrv_qx_masterguard.h \
|
|
nutdrv_qx_mecer.h nutdrv_qx_ablerex.h \
|
|
nutdrv_qx_megatec.h nutdrv_qx_megatec-old.h nutdrv_qx_mustek.h nutdrv_qx_q1.h nutdrv_qx_hunnox.h \
|
|
nutdrv_qx_voltronic.h nutdrv_qx_voltronic-qs.h nutdrv_qx_voltronic-qs-hex.h nutdrv_qx_zinto.h \
|
|
xppc-mib.h huawei-mib.h eaton-ats16-nmc-mib.h eaton-ats16-nm2-mib.h apc-ats-mib.h raritan-px2-mib.h eaton-ats30-mib.h \
|
|
apc-pdu-mib.h ever-hid.h eaton-pdu-genesis2-mib.h eaton-pdu-marlin-mib.h eaton-pdu-marlin-helpers.h \
|
|
eaton-pdu-pulizzi-mib.h eaton-pdu-revelation-mib.h emerson-avocent-pdu-mib.h legrand-hid.h \
|
|
hpe-pdu-mib.h powervar-hid.h delta_ups-hid.h generic_modbus.h salicru-hid.h adelsystem_cbi.h rpi-hid.h
|
|
|
|
# Define a dummy library so that Automake builds rules for the
|
|
# corresponding object files. This library is not actually built,
|
|
# as a final product. It was necessary for Automake-technical reasons,
|
|
# because per-object CFLAGS can only be specified for libraries, not
|
|
# for object files. This library is used during the build process,
|
|
# and is not meant to be installed.
|
|
EXTRA_LTLIBRARIES = libdummy.la libdummy_serial.la
|
|
libdummy_la_SOURCES = main.c dstate.c
|
|
libdummy_la_LDFLAGS = -no-undefined -static
|
|
libdummy_serial_la_SOURCES = serial.c
|
|
libdummy_serial_la_LDFLAGS = -no-undefined -static
|
|
|
|
dummy:
|
|
|
|
CLEANFILES = $(EXTRA_LTLIBRARIES) $(EXTRA_PROGRAMS)
|
|
MAINTAINERCLEANFILES = Makefile.in .dirstamp
|
|
|
|
# NOTE: Do not clean ".deps" in SUBDIRS of the main project,
|
|
# the root Makefile.am takes care of that!
|
|
#clean-local:
|
|
# rm -rf $(builddir)/.deps
|