356 lines
8.3 KiB
Groff
356 lines
8.3 KiB
Groff
'\" t
|
|
.\" Title: generic_modbus
|
|
.\" Author: [see the "AUTHOR" section]
|
|
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
|
|
.\" Date: 04/26/2022
|
|
.\" Manual: NUT Manual
|
|
.\" Source: Network UPS Tools 2.8.0
|
|
.\" Language: English
|
|
.\"
|
|
.TH "GENERIC_MODBUS" "8" "04/26/2022" "Network UPS Tools 2\&.8\&.0" "NUT Manual"
|
|
.\" -----------------------------------------------------------------
|
|
.\" * Define some portability stuff
|
|
.\" -----------------------------------------------------------------
|
|
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
.\" http://bugs.debian.org/507673
|
|
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
|
|
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
.ie \n(.g .ds Aq \(aq
|
|
.el .ds Aq '
|
|
.\" -----------------------------------------------------------------
|
|
.\" * set default formatting
|
|
.\" -----------------------------------------------------------------
|
|
.\" disable hyphenation
|
|
.nh
|
|
.\" disable justification (adjust text to left margin only)
|
|
.ad l
|
|
.\" -----------------------------------------------------------------
|
|
.\" * MAIN CONTENT STARTS HERE *
|
|
.\" -----------------------------------------------------------------
|
|
.SH "NAME"
|
|
generic_modbus \- Driver for contact (direct) signal UPS devices connected via modbus remote I/O gateways
|
|
.SH "SYNOPSIS"
|
|
.sp
|
|
\fBgeneric_modbus\fR \-h
|
|
.sp
|
|
\fBgeneric_modbus\fR \-a \fIDEVICE_NAME\fR [\fIOPTIONS\fR]
|
|
.if n \{\
|
|
.sp
|
|
.\}
|
|
.RS 4
|
|
.it 1 an-trap
|
|
.nr an-no-space-flag 1
|
|
.nr an-break-flag 1
|
|
.br
|
|
.ps +1
|
|
\fBNote\fR
|
|
.ps -1
|
|
.br
|
|
.sp
|
|
This man page only documents the specific features of the \fBgeneric_modbus\fR driver\&. For information about the core driver, see \fBnutupsdrv\fR(8)\&.
|
|
.sp .5v
|
|
.RE
|
|
.SH "SUPPORTED HARDWARE"
|
|
.sp
|
|
This is a generic modbus driver expected to work with contact (direct) signal UPS devices, connected via modbus RIO (remote I/O) either serial or TCP/IP\&.
|
|
.sp
|
|
The driver has been tested against PULS UPS (model UB40\&.241) via MOXA ioLogikR1212 (RS485) and ioLogikE1212 (TCP/IP)\&.
|
|
.PP
|
|
More information about this UPS can be found here:
|
|
.RS 4
|
|
https://products\&.pulspower\&.com/ca/ubc10\-241\-n1\&.html
|
|
.RE
|
|
.PP
|
|
More information about Moxa ioLogik R1212, E1212 can be found here:
|
|
.RS 4
|
|
https://www\&.moxa\&.com/en/products/industrial\-edge\-connectivity/controllers\-and\-ios
|
|
.RE
|
|
.sp
|
|
The PULS UPS UB40\&.241 supports the following signals:
|
|
.sp
|
|
.if n \{\
|
|
.RS 4
|
|
.\}
|
|
.nf
|
|
Ready contact (DO) <\-\-> HB
|
|
Buffering contact (DO) <\-\-> OL | OB
|
|
Battery\-low (DO) <\-\-> LB
|
|
Replace Battery (DO) <\-\-> RB
|
|
Inhibit (DI) <\-\-> FSD
|
|
.fi
|
|
.if n \{\
|
|
.RE
|
|
.\}
|
|
.sp
|
|
Digital port direction (DI/DO) assumes the device perspective
|
|
.sp
|
|
The driver\(cqs concept is to map the UPS states (as defined in NUT) onto UPS contacts\*(Aq states\&. The driver has an extended configuration interface implemented using variables defined in ups\&.conf\&.
|
|
.SH "HARDWARE INTERCONNECTION"
|
|
.sp
|
|
The commission of modbus remote I/O server as well as UPS device is carried out following the corresponding instruction manuals\&. The following figure depicts the anticipated communication path and hardware interconnection:
|
|
.sp
|
|
.if n \{\
|
|
.RS 4
|
|
.\}
|
|
.nf
|
|
+\-\-\-\-\-\-+ +\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-+ +\-\-\-\-\-\-\-\-\-\-\-\-+ +\-\-\-\-\-\-\-\-\-\-\-\-+
|
|
| UPSD | <\-\-\-> | GENERIC_MODBUS | <\-\-\-> | MODBUS RIO | <\-\-\-> | UPS DEVICE |
|
|
+\-\-\-\-\-\-+ (1) +\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-+ (2) +\-\-\-\-\-\-\-\-\-\-\-\-+ (3) +\-\-\-\-\-\-\-\-\-\-\-\-+
|
|
| |
|
|
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-+
|
|
HOST CONTROLLER
|
|
|
|
(1) Unix IPC
|
|
(2) RS232 | TCP/IP
|
|
(3) contacts
|
|
.fi
|
|
.if n \{\
|
|
.RE
|
|
.\}
|
|
.SH "EXTRA ARGUMENTS"
|
|
.sp
|
|
This driver supports the following optional settings in the \fBups.conf\fR(5) file:
|
|
.SS "Generic:"
|
|
.PP
|
|
\fBdevice_mfr\fR=\fIvalue\fR
|
|
.RS 4
|
|
A string specifying the manufacturer of the UPS device (default UNKNOWN)\&.
|
|
.RE
|
|
.PP
|
|
\fBdevice_model\fR=\fIvalue\fR
|
|
.RS 4
|
|
A string specifying the model of the UPS device (default UNKNOWN)\&.
|
|
.RE
|
|
.SS "Serial:"
|
|
.PP
|
|
\fBser_baud_rate\fR=\fIvalue\fR
|
|
.RS 4
|
|
A integer specifying the serial port baud rate (default 9600)\&.
|
|
.RE
|
|
.PP
|
|
\fBser_data_bit\fR=\fIvalue\fR
|
|
.RS 4
|
|
A integer specifying the serial port data bit (default 8)\&.
|
|
.RE
|
|
.PP
|
|
\fBser_parity\fR=\fIvalue\fR
|
|
.RS 4
|
|
A character specifying the serial port parity (default N)\&.
|
|
.RE
|
|
.PP
|
|
\fBser_stop_bit\fR=\fIvalue\fR
|
|
.RS 4
|
|
An integer specifying the serial port stop bit (default 1)\&.
|
|
.RE
|
|
.SS "Modbus:"
|
|
.PP
|
|
\fBrio_slave_id\fR=\fIvalue\fR
|
|
.RS 4
|
|
An integer specifying the RIO modbus slave ID (default 1)\&.
|
|
.RE
|
|
.SS "States (X = OL, OB, LB, HB, RB, CHRG, DISCHRG, FSD)"
|
|
.PP
|
|
\fB<X>_addr\fR=\fIvalue\fR
|
|
.RS 4
|
|
A number specifying the modbus address for the X state\&.
|
|
.RE
|
|
.PP
|
|
\fB<X>_regtype\fR=\fIvalue\fR
|
|
.RS 4
|
|
A number specifying the modbus register type for the X state
|
|
.RE
|
|
.PP
|
|
Default values:
|
|
.RS 4
|
|
.sp
|
|
.if n \{\
|
|
.RS 4
|
|
.\}
|
|
.nf
|
|
1 for X = OL, OB, LB ,HB, RB, CHRG, DISCHRG
|
|
0 for X = FSD
|
|
.fi
|
|
.if n \{\
|
|
.RE
|
|
.\}
|
|
.RE
|
|
.PP
|
|
Valid values:
|
|
.RS 4
|
|
.sp
|
|
.if n \{\
|
|
.RS 4
|
|
.\}
|
|
.nf
|
|
0:COIL, 1:INPUT_B, 2:INPUT_R, 3:HOLDING
|
|
.fi
|
|
.if n \{\
|
|
.RE
|
|
.\}
|
|
.RE
|
|
.PP
|
|
\fB<X>_noro\fR=\fIvalue\fR
|
|
.RS 4
|
|
A number specifying the contact configuration for the X state (default 1)\&.
|
|
.RE
|
|
.PP
|
|
Valid values:
|
|
.RS 4
|
|
.sp
|
|
.if n \{\
|
|
.RS 4
|
|
.\}
|
|
.nf
|
|
0:NC, 1:NO
|
|
.fi
|
|
.if n \{\
|
|
.RE
|
|
.\}
|
|
.if n \{\
|
|
.sp
|
|
.\}
|
|
.RS 4
|
|
.it 1 an-trap
|
|
.nr an-no-space-flag 1
|
|
.nr an-break-flag 1
|
|
.br
|
|
.ps +1
|
|
\fBNote\fR
|
|
.ps -1
|
|
.br
|
|
NO stands for normally open and NC for normally closed contact
|
|
.sp .5v
|
|
.RE
|
|
.RE
|
|
.SS "Shutdown"
|
|
.PP
|
|
\fBFSD_pulse_duration\fR=\fIvalue\fR
|
|
.RS 4
|
|
A number specifying the duration in ms for the inhibit pulse\&. If it\(cqs not defined, signal has only one transition depending on FSD_noro configuration\&.
|
|
.sp
|
|
Examples for FSD signal configuration:
|
|
.RE
|
|
.sp
|
|
.if n \{\
|
|
.RS 4
|
|
.\}
|
|
.nf
|
|
FSD_noro = 1
|
|
FSD_pulse_duration = 150
|
|
|
|
+\-\-\-\-\-+
|
|
| |
|
|
inhibit pulse >\-\-\-\-\-+ +\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\->
|
|
<\-\-\->
|
|
150ms
|
|
|
|
|
|
FSD_noro = 0
|
|
|
|
inhibit pulse >\-\-\-\-\-+
|
|
|
|
|
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\->
|
|
.fi
|
|
.if n \{\
|
|
.RE
|
|
.\}
|
|
.SH "CONFIGURATION"
|
|
.sp
|
|
Here is an example of generic_modbus driver configuration in \fBups\&.conf\fR file:
|
|
.sp
|
|
.if n \{\
|
|
.RS 4
|
|
.\}
|
|
.nf
|
|
[generic_modbus]
|
|
driver = generic_modbus
|
|
port = /dev/ttyUSB0
|
|
desc = "generic ups driver"
|
|
# device info
|
|
device_mfr = "PULS"
|
|
device_model = "UB40\&.241"
|
|
# serial settings
|
|
ser_baud_rate = 9600
|
|
ser_parity = N
|
|
ser_data_bit = 8
|
|
ser_stop_bit = 1
|
|
# modbus slave id
|
|
rio_slave_id = 5
|
|
# UPS signal state attributes
|
|
OB_addr = 0x0
|
|
OB_regtype = 1
|
|
OB_noro = 0
|
|
LB_addr = 0x1
|
|
LB_regtype = 1
|
|
HB_addr = 0x2
|
|
HB_regtype = 1
|
|
RB_addr = 0x3
|
|
RB_regtype = 1
|
|
FSD_addr = 0x0
|
|
FSD_regtype = 0
|
|
FSD_pulse_duration = 150
|
|
.fi
|
|
.if n \{\
|
|
.RE
|
|
.\}
|
|
.SH "INSTANT COMMANDS"
|
|
.sp
|
|
This driver support the following instant commands:
|
|
.PP
|
|
load\&.off
|
|
.RS 4
|
|
executes "instant poweroff"
|
|
.RE
|
|
.SH "INSTALLATION"
|
|
.sp
|
|
This driver is not built by default\&. You can build it by installing libmodbus and running configure \-\-with\-modbus=yes\&.
|
|
.sp
|
|
You also need to give proper permissions on the local serial device file (/dev/ttyUSB0 for example) to allow the run\-time NUT driver user account to access it\&.
|
|
.SH "OTHER NOTES"
|
|
.sp
|
|
The generic_modbus driver intends to support generic UPS devices with contact signals through modbus TCP/RTU gateways (also known as RIO \(em remote I/Os)\&. The data and signal path looks like this:
|
|
.sp
|
|
.if n \{\
|
|
.RS 4
|
|
.\}
|
|
.nf
|
|
[UPSD] <\-\-\- IPC \-\-\-> [GENERIC_UPS] <\-\-\- modbus TCP/RTU \-\-\-> MODBUS\-RIO <\-\-\- contacts \-\-\-> [UPS DEVICE]
|
|
.fi
|
|
.if n \{\
|
|
.RE
|
|
.\}
|
|
.sp
|
|
On the other hand, you can setup any kind of modbus server, and configure the generic_modbus driver to connect and read or write specific registers\&. Your application / modbus server could then drive NUT statuses (e\&.g\&. OL, OB, HB etc) by writing over those registers\&.
|
|
.SH "AUTHOR"
|
|
.sp
|
|
Dimitris Economou <dimitris\&.s\&.economou@gmail\&.com>
|
|
.SH "SEE ALSO"
|
|
.SS "The core driver:"
|
|
.sp
|
|
\fBnutupsdrv\fR(8), \fBups.conf\fR(5)
|
|
.SS "Internet resources:"
|
|
.sp
|
|
.RS 4
|
|
.ie n \{\
|
|
\h'-04'\(bu\h'+03'\c
|
|
.\}
|
|
.el \{\
|
|
.sp -1
|
|
.IP \(bu 2.3
|
|
.\}
|
|
The NUT (Network UPS Tools) home page:
|
|
http://www\&.networkupstools\&.org/
|
|
.RE
|
|
.sp
|
|
.RS 4
|
|
.ie n \{\
|
|
\h'-04'\(bu\h'+03'\c
|
|
.\}
|
|
.el \{\
|
|
.sp -1
|
|
.IP \(bu 2.3
|
|
.\}
|
|
libmodbus home page:
|
|
http://libmodbus\&.org
|
|
.RE
|