65 lines
1.6 KiB
Plaintext
65 lines
1.6 KiB
Plaintext
LIEBERT-ESP2(8)
|
|
==============
|
|
|
|
NAME
|
|
----
|
|
|
|
liebert-esp2 - Driver for Liebert UPS, using the ESP-II serial protocol
|
|
|
|
NOTE
|
|
----
|
|
|
|
This man page only documents the hardware-specific features of the
|
|
liebert-esp2 driver. For information about the core driver, see
|
|
linkman:nutupsdrv[8].
|
|
|
|
SPECIAL CABLING NOTE
|
|
--------------------
|
|
|
|
Be aware that an RS-232 cable with ONLY the RX, TX and ground pin
|
|
must be used when interfacing with GXT2 series UPS units (and possibly others),
|
|
since the handshaking lines are used for purposes other than RS-232 flow control.
|
|
Use of a standard RS-232 cable with full handshaking may result in
|
|
undesired operation and/or shutdown. It is therefore advisable to confirm
|
|
the proper cable/wiring with the diagram provided in the manual with your UPS.
|
|
|
|
SUPPORTED HARDWARE
|
|
------------------
|
|
|
|
Tested to work on the following units:
|
|
|
|
* Liebert GXT2-6000RT208
|
|
|
|
This is an experimental driver. You have been warned.
|
|
|
|
This driver currently does not support modification of configuration parameters,
|
|
such as the low battery warning time and automatic restart policy.
|
|
|
|
EXTRA ARGUMENTS
|
|
---------------
|
|
|
|
This driver supports the following optional settings in linkman:ups.conf[5]:
|
|
|
|
*baudrate=*'num'::
|
|
Set the speed of the serial connection - 1200, 2400 (default), 4800, 9600 or 19200.
|
|
|
|
AUTHORS
|
|
-------
|
|
|
|
* Richard Gregory <R.Gregory at liverpool.ac.uk>
|
|
* Arjen de Korte <adkorte-guest at alioth.debian.org>
|
|
* Nash Kaminski <nashkaminski at kaminski.io>
|
|
|
|
SEE ALSO
|
|
--------
|
|
|
|
The core driver:
|
|
~~~~~~~~~~~~~~~~
|
|
|
|
linkman:nutupsdrv[8]
|
|
|
|
Internet resources:
|
|
~~~~~~~~~~~~~~~~~~~
|
|
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|