# Network UPS Tools: drivers # Make sure out-of-dir dependencies exist (especially when dev-building parts): $(top_builddir)/common/libcommon.la \ $(top_builddir)/common/libparseconf.la \ $(top_builddir)/clients/libupsclient.la: dummy @cd $(@D) && $(MAKE) $(AM_MAKEFLAGS) $(@F) # by default, link programs in this directory with libcommon.la # (libtool version of the static lib, in order to access LTLIBOBJS) #FIXME: SERLIBS is only useful for LDADD_DRIVERS_SERIAL not for LDADD_COMMON LDADD_COMMON = $(top_builddir)/common/libcommon.la $(top_builddir)/common/libparseconf.la LDADD_DRIVERS = libdummy.la $(LDADD_COMMON) LDADD_DRIVERS_SERIAL = libdummy_serial.la $(LDADD_DRIVERS) $(SERLIBS) # most targets are drivers, so make this the default LDADD = $(LDADD_DRIVERS_SERIAL) # Avoid per-target CFLAGS, because this will prevent re-use of object # files. In any case, CFLAGS are only -I options, so there is no harm, # but only add them if we really use the target. AM_CFLAGS = -I$(top_srcdir)/include if WITH_USB AM_CFLAGS += $(LIBUSB_CFLAGS) endif if WITH_NEON AM_CFLAGS += $(LIBNEON_CFLAGS) endif if WITH_LIBPOWERMAN AM_CFLAGS += $(LIBPOWERMAN_CFLAGS) endif if WITH_IPMI AM_CFLAGS += $(LIBIPMI_CFLAGS) endif if WITH_MODBUS AM_CFLAGS += $(LIBMODBUS_CFLAGS) endif SERIAL_DRIVERLIST = al175 bcmxcp belkin belkinunv bestfcom \ bestfortress bestuferrups bestups dummy-ups etapro everups \ gamatronic genericups isbmex liebert liebert-esp2 masterguard metasys \ mge-utalk microdowell microsol-apc mge-shut oneac optiups powercom rhino \ safenet nutdrv_siemens-sitop skel solis tripplite tripplitesu upscode2 victronups powerpanel \ blazer_ser clone clone-outlet ivtscd apcsmart apcsmart-old apcupsd-ups riello_ser SNMP_DRIVERLIST = snmp-ups USB_LIBUSB_DRIVERLIST = usbhid-ups bcmxcp_usb tripplite_usb \ blazer_usb richcomm_usb riello_usb \ nutdrv_atcl_usb USB_DRIVERLIST = $(USB_LIBUSB_DRIVERLIST) SERIAL_USB_DRIVERLIST = \ nutdrv_qx NEONXML_DRIVERLIST = netxml-ups MACOSX_DRIVERLIST = macosx-ups MODBUS_DRIVERLIST = phoenixcontact_modbus generic_modbus huawei-ups2000 socomec_jbus adelsystem_cbi LINUX_I2C_DRIVERLIST = asem pijuice POWERMAN_DRIVERLIST = powerman-pdu IPMI_DRIVERLIST = nut-ipmipsu # distribute all drivers, even ones that are not built by default EXTRA_PROGRAMS = $(SERIAL_DRIVERLIST) $(USB_DRIVERLIST) $(SERIAL_USB_DRIVERLIST) EXTRA_PROGRAMS += $(SNMP_DRIVERLIST) $(NEONXML_DRIVERLIST) $(MACOSX_DRIVERLIST) EXTRA_PROGRAMS += $(LINUX_I2C_DRIVERLIST) # construct the list of drivers to build if SOME_DRIVERS driverexec_PROGRAMS = $(DRIVER_BUILD_LIST) else driverexec_PROGRAMS = if WITH_SERIAL driverexec_PROGRAMS += $(SERIAL_DRIVERLIST) $(SERIAL_USB_DRIVERLIST) else if WITH_USB driverexec_PROGRAMS += $(SERIAL_USB_DRIVERLIST) endif endif if WITH_SNMP driverexec_PROGRAMS += $(SNMP_DRIVERLIST) endif if WITH_USB driverexec_PROGRAMS += $(USB_LIBUSB_DRIVERLIST) endif if WITH_NEON driverexec_PROGRAMS += $(NEONXML_DRIVERLIST) endif if WITH_LIBPOWERMAN driverexec_PROGRAMS += $(POWERMAN_DRIVERLIST) endif if WITH_IPMI driverexec_PROGRAMS += $(IPMI_DRIVERLIST) endif if WITH_MACOSX driverexec_PROGRAMS += $(MACOSX_DRIVERLIST) endif if WITH_LINUX_I2C driverexec_PROGRAMS += $(LINUX_I2C_DRIVERLIST) endif if WITH_MODBUS driverexec_PROGRAMS += $(MODBUS_DRIVERLIST) endif else driverexec_PROGRAMS += skel endif # always build upsdrvctl sbin_PROGRAMS = upsdrvctl # ========================================================================== # Driver build details # upsdrvctl: the all-singing all-dancing driver control program upsdrvctl_SOURCES = upsdrvctl.c upsdrvctl_LDADD = $(LDADD_COMMON) # serial drivers: all of them use standard LDADD and CFLAGS al175_SOURCES = al175.c apcsmart_SOURCES = apcsmart.c apcsmart_tabs.c apcsmart_old_SOURCES = apcsmart-old.c bcmxcp_SOURCES = bcmxcp.c bcmxcp_ser.c bcmxcp_LDADD = $(LDADD) -lm belkin_SOURCES = belkin.c belkinunv_SOURCES = belkinunv.c bestfcom_SOURCES = bestfcom.c bestfortress_SOURCES = bestfortress.c bestuferrups_SOURCES = bestuferrups.c bestups_SOURCES = bestups.c blazer_ser_SOURCES = blazer.c blazer_ser.c blazer_ser_LDADD = $(LDADD) -lm etapro_SOURCES = etapro.c everups_SOURCES = everups.c gamatronic_SOURCES = gamatronic.c genericups_SOURCES = genericups.c isbmex_SOURCES = isbmex.c isbmex_LDADD = $(LDADD) -lm ivtscd_SOURCES = ivtscd.c liebert_SOURCES = liebert.c liebert_esp2_SOURCES = liebert-esp2.c masterguard_SOURCES = masterguard.c metasys_SOURCES = metasys.c metasys_LDADD = $(LDADD) -lm mge_utalk_SOURCES = mge-utalk.c microdowell_SOURCES = microdowell.c microsol_apc_SOURCES = microsol-apc.c microsol-common.c microsol_apc_LDADD = $(LDADD) -lm oneac_SOURCES = oneac.c optiups_SOURCES = optiups.c powercom_SOURCES = powercom.c powercom_LDADD = $(LDADD) -lm powerpanel_SOURCES = powerpanel.c powerp-bin.c powerp-txt.c powerpanel_LDADD = $(LDADD) -lm rhino_SOURCES = rhino.c rhino_LDADD = $(LDADD) -lm safenet_SOURCES = safenet.c nutdrv_siemens_sitop_SOURCES = nutdrv_siemens_sitop.c solis_SOURCES = solis.c solis_LDADD = $(LDADD) -lm tripplite_SOURCES = tripplite.c tripplite_LDADD = $(LDADD) -lm tripplitesu_SOURCES = tripplitesu.c upscode2_SOURCES = upscode2.c upscode2_LDADD = $(LDADD) -lm victronups_SOURCES = victronups.c riello_ser_SOURCES = riello.c riello_ser.c riello_ser_LDADD = $(LDADD) -lm # non-serial drivers: these use custom LDADD and/or CFLAGS # dummy dummy_ups_SOURCES = dummy-ups.c dummy_ups_CFLAGS = $(AM_CFLAGS) -I$(top_srcdir)/clients dummy_ups_LDADD = $(LDADD_DRIVERS) $(top_builddir)/clients/libupsclient.la if WITH_SSL dummy_ups_CFLAGS += $(LIBSSL_CFLAGS) dummy_ups_LDADD += $(LIBSSL_LIBS) endif # Clone drivers clone_SOURCES = clone.c clone_outlet_SOURCES = clone-outlet.c # apcupsd client driver apcupsd_ups_SOURCES = apcupsd-ups.c apcupsd_ups_CFLAGS = $(AM_CFLAGS) apcupsd_ups_LDADD = $(LDADD_DRIVERS) # sample skeleton driver skel_SOURCES = skel.c skel_LDADD = $(LDADD_DRIVERS) # USB if WITH_LIBUSB_0_1 LIBUSB_IMPL = libusb0.c endif if WITH_LIBUSB_1_0 LIBUSB_IMPL = libusb1.c endif USBHID_UPS_SUBDRIVERS = apc-hid.c arduino-hid.c belkin-hid.c cps-hid.c explore-hid.c \ liebert-hid.c mge-hid.c powercom-hid.c tripplite-hid.c idowell-hid.c \ openups-hid.c powervar-hid.c delta_ups-hid.c ever-hid.c legrand-hid.c salicru-hid.c usbhid_ups_SOURCES = usbhid-ups.c libhid.c $(LIBUSB_IMPL) hidparser.c \ usb-common.c $(USBHID_UPS_SUBDRIVERS) usbhid_ups_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm tripplite_usb_SOURCES = tripplite_usb.c $(LIBUSB_IMPL) usb-common.c tripplite_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm bcmxcp_usb_SOURCES = bcmxcp_usb.c bcmxcp.c usb-common.c bcmxcp_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm blazer_usb_SOURCES = blazer.c blazer_usb.c $(LIBUSB_IMPL) usb-common.c blazer_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm nutdrv_atcl_usb_SOURCES = nutdrv_atcl_usb.c usb-common.c nutdrv_atcl_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) richcomm_usb_SOURCES = richcomm_usb.c usb-common.c richcomm_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) riello_usb_SOURCES = riello.c riello_usb.c $(LIBUSB_IMPL) usb-common.c riello_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm # HID-over-serial mge_shut_SOURCES = usbhid-ups.c libshut.c libhid.c hidparser.c mge-hid.c # per-target CFLAGS are necessary here mge_shut_CFLAGS = $(AM_CFLAGS) -DSHUT_MODE=1 mge_shut_LDADD = $(LDADD) -lm # SNMP # Please keep the MIB table below sorted roughly alphabetically (incidentally # by vendor too) to ease maintenance and codebase fork resynchronisations snmp_ups_SOURCES = snmp-ups.c snmp-ups-helpers.c \ apc-mib.c apc-pdu-mib.c \ baytech-mib.c bestpower-mib.c \ compaq-mib.c cyberpower-mib.c \ delta_ups-mib.c \ eaton-pdu-genesis2-mib.c eaton-pdu-marlin-mib.c eaton-pdu-marlin-helpers.c \ eaton-pdu-pulizzi-mib.c eaton-pdu-revelation-mib.c \ eaton-ats16-nmc-mib.c eaton-ats16-nm2-mib.c apc-ats-mib.c eaton-ats30-mib.c \ emerson-avocent-pdu-mib.c \ hpe-pdu-mib.c huawei-mib.c \ ietf-mib.c \ mge-mib.c \ netvision-mib.c \ powerware-mib.c \ raritan-pdu-mib.c raritan-px2-mib.c \ xppc-mib.c snmp_ups_CFLAGS = $(AM_CFLAGS) snmp_ups_CFLAGS += $(LIBNETSNMP_CFLAGS) snmp_ups_LDADD = $(LDADD_DRIVERS) $(LIBNETSNMP_LIBS) -lm # NEON XML/HTTP netxml_ups_SOURCES = netxml-ups.c mge-xml.c netxml_ups_LDADD = $(LDADD_DRIVERS) $(LIBNEON_LIBS) # Powerman powerman_pdu_SOURCES = powerman-pdu.c powerman_pdu_LDADD = $(LDADD) $(LIBPOWERMAN_LIBS) # IPMI PSU nut_ipmipsu_SOURCES = nut-ipmipsu.c if WITH_FREEIPMI nut_ipmipsu_SOURCES += nut-libfreeipmi.c endif # FIXME: Hacky hot-fix for build agents of varying OS generations: # Different versions of IPMI libs requested 'unsigned int *' or 'int *' args: #nut_ipmipsu_CFLAGS = $(AM_CFLAGS) -Wno-pointer-sign nut_ipmipsu_LDADD = $(LDADD) $(LIBIPMI_LIBS) # Mac OS X metadriver macosx_ups_LDADD = $(LDADD_DRIVERS) macosx_ups_LDFLAGS = $(LDFLAGS) -framework IOKit -framework CoreFoundation macosx_ups_SOURCES = macosx-ups.c # Modbus drivers phoenixcontact_modbus_SOURCES = phoenixcontact_modbus.c phoenixcontact_modbus_LDADD = $(LDADD_DRIVERS) $(LIBMODBUS_LIBS) generic_modbus_SOURCES = generic_modbus.c generic_modbus_LDADD = $(LDADD_DRIVERS) $(LIBMODBUS_LIBS) adelsystem_cbi_SOURCES = adelsystem_cbi.c adelsystem_cbi_LDADD = $(LDADD_DRIVERS) $(LIBMODBUS_LIBS) # Huawei UPS2000 driver # (this is both a Modbus and a serial driver) huawei_ups2000_SOURCES = huawei-ups2000.c huawei_ups2000_LDADD = $(LDADD_DRIVERS_SERIAL) $(LIBMODBUS_LIBS) # Socomec JBUS driver # (this is a Modbus driver) socomec_jbus_SOURCES = socomec_jbus.c socomec_jbus_LDADD = $(LDADD_DRIVERS_SERIAL) $(LIBMODBUS_LIBS) # Linux I2C drivers asem_LDADD = $(LDADD_DRIVERS) asem_SOURCES = asem.c pijuice_LDADD = $(LDADD_DRIVERS) pijuice_SOURCES = pijuice.c # nutdrv_qx USB/Serial nutdrv_qx_SOURCES = nutdrv_qx.c nutdrv_qx_LDADD = $(LDADD_DRIVERS) -lm nutdrv_qx_CFLAGS = $(AM_CFLAGS) if WITH_SERIAL nutdrv_qx_CFLAGS += -DQX_SERIAL nutdrv_qx_LDADD += libdummy_serial.la $(SERLIBS) endif if WITH_USB nutdrv_qx_CFLAGS += -DQX_USB nutdrv_qx_SOURCES += $(LIBUSB_IMPL) usb-common.c nutdrv_qx_LDADD += $(LIBUSB_LIBS) endif NUTDRV_QX_SUBDRIVERS = nutdrv_qx_bestups.c nutdrv_qx_blazer-common.c \ nutdrv_qx_masterguard.c \ nutdrv_qx_mecer.c nutdrv_qx_megatec.c nutdrv_qx_megatec-old.c \ nutdrv_qx_mustek.c nutdrv_qx_q1.c nutdrv_qx_voltronic.c \ nutdrv_qx_voltronic-qs.c nutdrv_qx_voltronic-qs-hex.c nutdrv_qx_zinto.c \ nutdrv_qx_hunnox.c nutdrv_qx_ablerex.c nutdrv_qx_SOURCES += $(NUTDRV_QX_SUBDRIVERS) # ---------------------------------------------------------------------- # List of header files. The purpose of this list is not dependency # tracking (which is automatic), but to ensure these files are # distributed by "make dist". dist_noinst_HEADERS = apc-mib.h apc-iem-mib.h apc-hid.h arduino-hid.h baytech-mib.h bcmxcp.h bcmxcp_ser.h \ bcmxcp_io.h belkin.h belkin-hid.h bestpower-mib.h blazer.h cps-hid.h dstate.h \ dummy-ups.h explore-hid.h gamatronic.h genericups.h \ hidparser.h hidtypes.h ietf-mib.h libhid.h libshut.h nut_libusb.h liebert-hid.h \ main.h mge-hid.h mge-mib.h mge-utalk.h \ mge-xml.h microdowell.h microsol-apc.h microsol-common.h netvision-mib.h netxml-ups.h nut-ipmi.h oneac.h \ powercom.h powerpanel.h powerp-bin.h powerp-txt.h powerware-mib.h raritan-pdu-mib.h \ safenet.h serial.h snmp-ups.h solis.h tripplite.h tripplite-hid.h \ upshandler.h usb-common.h usbhid-ups.h powercom-hid.h compaq-mib.h idowell-hid.h \ apcsmart.h apcsmart_tabs.h apcsmart-old.h apcupsd-ups.h cyberpower-mib.h riello.h openups-hid.h \ delta_ups-mib.h nutdrv_qx.h nutdrv_qx_bestups.h nutdrv_qx_blazer-common.h \ nutdrv_qx_masterguard.h \ nutdrv_qx_mecer.h nutdrv_qx_ablerex.h \ nutdrv_qx_megatec.h nutdrv_qx_megatec-old.h nutdrv_qx_mustek.h nutdrv_qx_q1.h nutdrv_qx_hunnox.h \ nutdrv_qx_voltronic.h nutdrv_qx_voltronic-qs.h nutdrv_qx_voltronic-qs-hex.h nutdrv_qx_zinto.h \ xppc-mib.h huawei-mib.h eaton-ats16-nmc-mib.h eaton-ats16-nm2-mib.h apc-ats-mib.h raritan-px2-mib.h eaton-ats30-mib.h \ apc-pdu-mib.h ever-hid.h eaton-pdu-genesis2-mib.h eaton-pdu-marlin-mib.h eaton-pdu-marlin-helpers.h \ eaton-pdu-pulizzi-mib.h eaton-pdu-revelation-mib.h emerson-avocent-pdu-mib.h legrand-hid.h \ hpe-pdu-mib.h powervar-hid.h delta_ups-hid.h generic_modbus.h salicru-hid.h adelsystem_cbi.h # Define a dummy library so that Automake builds rules for the # corresponding object files. This library is not actually built, # as a final product. It was necessary for Automake-technical reasons, # because per-object CFLAGS can only be specified for libraries, not # for object files. This library is used during the build process, # and is not meant to be installed. EXTRA_LTLIBRARIES = libdummy.la libdummy_serial.la libdummy_la_SOURCES = main.c dstate.c libdummy_la_LDFLAGS = -no-undefined -static libdummy_serial_la_SOURCES = serial.c libdummy_serial_la_LDFLAGS = -no-undefined -static dummy: CLEANFILES = $(EXTRA_LTLIBRARIES) $(EXTRA_PROGRAMS) MAINTAINERCLEANFILES = Makefile.in .dirstamp # NOTE: Do not clean ".deps" in SUBDIRS of the main project, # the root Makefile.am takes care of that! #clean-local: # rm -rf $(builddir)/.deps