'\" t
.\"     Title: bcmxcp_usb
.\"    Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
.\"      Date: 12/29/2015
.\"    Manual: NUT Manual
.\"    Source: Network UPS Tools 2.7.3.1
.\"  Language: English
.\"
.TH "BCMXCP_USB" "8" "12/29/2015" "Network UPS Tools 2\&.7\&.3\&." "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el       .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
bcmxcp_usb \- Experimental driver for UPSes supporting the BCM/XCP protocol over USB
.SH "NOTE"
.sp
This man page only documents the hardware\-specific features of the bcmxcp_usb driver\&. For information about the core driver, see \fBnutupsdrv\fR(8)\&. This driver is a variant of the serial driver bcmxcp and uses the same core code\&.
.SH "SUPPORTED HARDWARE"
.sp
This driver should recognize all BCM/XCP\-compatible UPSes that are connected via USB\&. It has been developed and tested on Powerware PW3501 hardware\&. It also has been tested on PW5110 hardware\&.
.SH "EXTRA ARGUMENTS"
.sp
This driver supports the following optional settings in the \fBups.conf\fR(5)\&.
.PP
\fBshutdown_delay=\fR\fIdelay\fR
.RS 4
The number of seconds that the UPS should wait between receiving the shutdown command and actually shutting off\&.
.RE
.SH "DEFAULT VALUES FOR THE EXTRA ARGUMENTS"
.sp
\fBshutdown_delay =\fR\fI120\fR
.SH "INSTANT COMMANDS"
.sp
This driver supports the following Instant Commands:
.PP
\fBshutdown\&.return\fR
.RS 4
Turn off the load and return when power is back\&.
.RE
.PP
\fBshutdown\&.stayoff\fR
.RS 4
Turn off the load and remain off\&.
.RE
.PP
\fBtest\&.battery\&.start\fR
.RS 4
Start a battery test\&.
.RE
.SH "TODO LIST"
.PP
\fBReport UPS alarm status\fR
.RS 4
BCM/XCP supports reporting a wide range of UPS alarm conditions\&.
.RE
.PP
\fBReport UPS statistics informations\fR
.RS 4
BCM/XCP supports reporting of UPS statistics data\&.
.RE
.SH "EXPERIMENTAL DRIVER"
.sp
This driver has been tagged experimental, even if it has been reported to be stable\&. Thus it is not suitable for production systems and it is not built by default\&. This is mainly due to the fact that it is a new driver\&.
.SH "INSTALLATION"
.sp
This driver is not built by default\&. You can build it by using "configure \-\-with\-usb=yes"\&. Note that it will also install other USB drivers\&.
.sp
You also need to install manually the hotplug files (libhidups and libhid\&.usermap), generally in etc/hotplug/usb/, to address the permission settings problem\&. Lastly note that the libhidups file must have execution flag set (ie using chmod +x \&...)\&.
.SH "IMPLEMENTATION"
.sp
bcmxcp_usb only supports 1 UPS at this time\&. You can put the "auto" value for port in ups\&.conf, i\&.e\&.:
.sp
.if n \{\
.RS 4
.\}
.nf
[pw3105]
        driver = bcmxcp_usb
        port = auto
.fi
.if n \{\
.RE
.\}
.SH "KNOWN ISSUES AND BUGS"
.SS ""Got EPERM: Operation not permitted upon driver startup""
.sp
You have forgotten to install the hotplug files, as explained in the INSTALLATION section above\&. Don\(cqt forget to restart hotplug so that it applies these changes\&.
.SH "AUTHOR"
.sp
Tore Ørpetveit <tore@orpetveit\&.net>, Wolfgang Ocker <weo@weo1\&.de>
.SH "SEE ALSO"
.SS "The core driver:"
.sp
\fBnutupsdrv\fR(8)
.SS "Internet resources:"
.sp
The NUT (Network UPS Tools) home page: http://www\&.networkupstools\&.org/