'\" t
.\"     Title: apcsmart-old
.\"    Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.76.1 <http://docbook.sf.net/>
.\"      Date: 07/26/2013
.\"    Manual: NUT Manual
.\"    Source: Network UPS Tools 2.6.5
.\"  Language: English
.\"
.TH "APCSMART\-OLD" "8" "07/26/2013" "Network UPS Tools 2\&.6\&.5" "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el       .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
apcsmart-old \- Driver for American Power Conversion Smart Protocol UPS equipment
.SH "SYNOPSIS"
.sp
\fBapcsmart\-old\fR \-h
.sp
\fBapcsmart\-old\fR \-a \fIUPS_NAME\fR [\fIOPTIONS\fR]
.if n \{\
.sp
.\}
.RS 4
.it 1 an-trap
.nr an-no-space-flag 1
.nr an-break-flag 1
.br
.ps +1
\fBNote\fR
.ps -1
.br
.sp
This man page only documents the hardware\-specific features of the apcsmart\-old driver\&. For information about the core driver, see \fBnutupsdrv\fR(8)\&.
.sp .5v
.RE
.SH "SUPPORTED HARDWARE"
.sp
apcsmart\-old should recognize all recent APC models that use a serial protocol at 2400 bps\&. This is primarily the Smart\-UPS, Matrix\-UPS and Back\-UPS Pro lines\&.
.sp
The driver attempts to support every bell and whistle of the APC reporting interface, whether or not this is strictly sensible\&.
.sp
Some older hardware may only report a handful of variables\&. This is usually not a bug\(emthey just don\(cqt support anything else\&.
.SH "CABLING"
.sp
This driver expects to see a 940\-0024C cable or a clone by default\&. You can switch to the 940\-0095B dual\-mode cable support with the cable= definition described below\&.
.sp
If your 940\-0024C cable is broken or missing, use this diagram to build a clone:
.sp
http://www\&.networkupstools\&.org/cables/940\-0024C\&.jpg
.SH "EXTRA ARGUMENTS"
.sp
This driver supports the following optional settings in the \fBups.conf\fR(5):
.PP
\fBcable=940\-0095B\fR
.RS 4
Configure the serial port for the APC 940\-0095B dual\-mode cable\&.
.RE
.PP
\fBsdtype=\fR\fInum\fR
.RS 4
Use shutdown type
\fInum\fR, according to this table:
.PP
0
.RS 4
soft shutdown or powerdown, depending on battery status
.RE
.PP
1
.RS 4
soft shutdown followed by powerdown
.RE
.PP
2
.RS 4
instant power off
.RE
.PP
3
.RS 4
power off with grace period
.RE
.PP
4
.RS 4
"force OB" hack method for CS 350
.RE
.RE
.sp
Modes 0 and 1 will power up the load when power returns\&. Modes 2 and 3 will keep the load turned off when the power returns\&.
.sp
Mode 4 exploits an oddity in the CS 350 models since they only seem to support the S command, but then only when running on battery\&. As a result, the driver will force the UPS to go on battery if necessary before sending the shutdown command\&. This ensures that the load gets reset\&.
.SH "BUGS"
.sp
Some older APC UPS models return bogus data in the status register during a front panel test\&. This is usually detected and discarded, but some other unexpected values have occasionally slipped through\&.
.sp
APC UPS models with both USB and serial ports require a power cycle when switching from USB communication to serial, and perhaps vice versa\&.
.SH "AUTHOR"
.sp
Nigel Metheringham <Nigel\&.Metheringham@Intechnology\&.co\&.uk> (drawing heavily on the original apcsmart driver by Russell Kroll)\&. This driver was called newapc for a time and was renamed in the 1\&.5 series\&. In 2\&.6\&.2 the driver was renamed to apcsmart\-old, being superseded by updated version with new features\&.
.SH "SEE ALSO"
.SS "The core driver:"
.sp
\fBnutupsdrv\fR(8)
.SS "Internet resources:"
.sp
The NUT (Network UPS Tools) home page: http://www\&.networkupstools\&.org/