/*  eaton-pdu-marlin-helpers.c - helper routines for eaton-pdu-marlin-mib.c
 *  to monitor Eaton ePDUs branded as:
 *                G2 Marlin SW / MI / MO / MA
 *                G3 Shark SW / MI / MO / MA
 *
 *  Copyright (C) 2017-2019
 * 		Arnaud Quette <ArnaudQuette@Eaton.com>
 *  Copyright (C) 2017
 * 		Jim Klimov <EvgenyKlimov@Eaton.com>
 *
 *  Supported by Eaton <http://www.eaton.com>
 *   and previously MGE Office Protection Systems <http://www.mgeops.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 *
 */

#include "config.h"	/* must be the first header */

#include <stdlib.h>
#include <stdio.h>
#include <stdint.h>

#include "eaton-pdu-marlin-helpers.h"
#include "dstate.h"
#include "common.h"
/* Allow access to temperature_unit */
#include "snmp-ups.h"

/* Take string "unitsPresent" (ex: "0,3,4,5"), and count the amount
 * of "," separators+1 using an inline function */
long marlin_device_count_fun(const char *daisy_dev_list)
{
	long count = 0, i;

	for (i = 0; daisy_dev_list[i] != '\0'; i++) {
		if (daisy_dev_list[i] == ',') {
			/* Each comma means a new device in the list */
			count ++;
		}
	}
	if (i > 0 && (daisy_dev_list[i - 1] != ',') ) {
		/* Non-empty string => at least one device, and no trailing commas */
		count ++;
	}

	upsdebugx(3, "%s: counted devices in '%s', got %ld",
		__func__, daisy_dev_list, count);
	return count;
}

/* Temperature unit consideration:
 * only store the device unit, for converting to Celsius.
 * Don't publish the device unit, since NUT will publish
 * as Celsius in all cases */
const char *eaton_sensor_temperature_unit_fun(void *raw_snmp_value)
{
	long snmp_value = *((long*)raw_snmp_value);
	switch (snmp_value) {
		case 0:
			/* store the value, for temperature processing */
			temperature_unit = TEMPERATURE_KELVIN;
			break;
		case 1:
			/* store the value, for temperature processing */
			temperature_unit = TEMPERATURE_CELSIUS;
			break;
		case 2:
			/* store the value, for temperature processing */
			temperature_unit = TEMPERATURE_FAHRENHEIT;
			break;
		default:
			/* store the value, for temperature processing */
			temperature_unit = TEMPERATURE_UNKNOWN;
			break;
	}
	return "celsius";
}