ASEM(8) ======= NAME ---- asem - driver for UPS in ASEM PB1300 NOTE ---- This man page only documents the hardware-specific features of the *asem* driver. For information about the core driver, see linkman:nutupsdrv[8]. SUPPORTED HARDWARE ------------------ The *asem* driver supports the UPS in ASEM PB1300 embedded PCs. Likely other I2C devices from the same manufacturer will work too, since this is a "custom" charger. Seems that there are two versions of the charger. Older one is based on Max1667, newer one is a custom solution. Both are on I2C address 0x09. To be compatible with both versions, the driver just reads bit 15 of address 0x13 which yields online/on battery status. Battery monitor is a BQ2060 at address 0x0B. EXTRA ARGUMENTS --------------- The required parameter for this driver is the I2C bus name: *port*='dev-node':: On the Asem PB1300, this should be `/dev/i2c-7` for the i801 SMBUS adapter. This driver also supports the following optional settings: *lb*='num':: Set the low battery threshold to 'num' volts. *hb*='num':: Set the high battery threshold to 'num' volts. INSTALLATION ------------ This driver is specific to the Linux I2C API, and requires the lm_sensors libi2c-dev or its equivalent to compile. Beware that the SystemIO memory used by the I2C controller is reserved by ACPI. If only a native I2C driver (e.g. i2c_i801, as of 3.5.X Linux kernels) is available, then you'll need to relax the ACPI resources check. For example, you can boot with the `acpi_enforce_resources=lax` option. ////////////////////////////////////////// Optional: use DIAGNOSTICS to describe troubleshooting techniques that are longer than what can be conveniently described in the driver error messages. DIAGNOSTICS ----------- ////////////////////////////////////////// KNOWN ISSUES AND BUGS --------------------- The driver shutdown function is not implemented, so other arrangements must be made to turn off the UPS. AUTHORS ------- Giuseppe Corbelli SEE ALSO -------- The core driver: ~~~~~~~~~~~~~~~~ linkman:nutupsdrv[8] Internet resources: ~~~~~~~~~~~~~~~~~~~ PB1300 specifications: http://www.asem.it/en/products/industrial-automation/box-pcs/performance/pb1300/ BQ2060 datasheet: http://www.ti.com/lit/ds/symlink/bq2060.pdf The NUT (Network UPS Tools) home page: http://www.networkupstools.org/