APCUPSD-UPS(8)
==============

NAME
----

apcupsd-ups - Driver for apcupsd client access

NOTE
----

This man page only documents the specific features of the
*apcupsd-ups* driver.  For information about the core driver, see
linkman:nutupsdrv[8].

DESCRIPTION
-----------

This driver is a client to *apcupsd* (another UPS monitoring project).

*apcupsd-ups* acts as an *apcupsd* client, simply forwarding data.
This can be useful in cases where both protocols are required in a network,
or in case apcupsd has a required UPS access mode missing from NUT.

EXTRA ARGUMENTS
---------------

This driver supports the following optional settings in linkman:nut.conf[5]:

*port*=<hostname>[:<port>]::
This is the name of a remote host running apcupsd (plus an optional port).

For instance:

    [apcupsd]
		driver = apcupsd-ups
		port = localhost
		desc = "apcupsd client"

BACKGROUND
----------

This driver was originally written in one evening to allow interoperating
with *apcupsd*.

SUPPORTED VARIABLES
-------------------

The following variables are translated from *apcupsd* to NUT.
All times should be converted to seconds (please file a bug
if you notice a mismatch in units).

[width="50%",cols="m,m",options="header"]
|===============================
| apcupsd variable | NUT variable(s)
| BCHARGE          | battery.charge
| MBATTCHG         | battery.charge.low
| RETPCT           | battery.charge.restart
| BATTDATE         | battery.date
| TIMELEFT         | battery.runtime
| MINTIMEL         | battery.runtime.low
| BATTV            | battery.voltage
| NOMBATTV         | battery.voltage.nominal
| LINEFREQ         | input.frequency
| SENSE            | input.sensitivity
| HITRANS          | input.transfer.high
| LOTRANS          | input.transfer.low
| LASTXFER         | input.transfer.reason
| LINEV            | input.voltage
| MAXLINEV         | input.voltage.maximum
| MINLINEV         | input.voltage.minimum
| NOMINV           | input.voltage.nominal
| LINEFREQ         | output.frequency
| OUTPUTV          | output.voltage
| NOMOUTV          | output.voltage.nominal
| DATE             | ups.date, ups.time
| DSHUTD           | ups.delay.shutdown
| DWAKE            | ups.delay.start
| FIRMWARE         | ups.firmware, ups.firmware.aux
| UPSNAME          | ups.id
| LOADPCT          | ups.load
| MANDATE          | ups.mfr.date
| NOMPOWER         | ups.realpower.nominal
| SERIALNO         | ups.serial
| STATUS           | ups.status
| ITEMP            | ups.temperature
| STESTI           | ups.test.interval
| SELFTEST         | ups.test.result
|===============================

LIMITATIONS
-----------

Access to *apcupsd* is strictly read only: no commands can be issued. This
stems from the design of *apcupsd*, where the settings are changed in
*apctest*. In order to run *apctest*, *apcupsd* must be stopped (and *apcupsd*
exposes the UPS to the network).

AUTHOR
------

Andreas Steinmetz

SEE ALSO
--------

linkman:ups.conf[5],
linkman:nutupsdrv[8]

Internet Resources:
~~~~~~~~~~~~~~~~~~~

* The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
* The apcupsd home page: http://www.apcupsd.org/