nut (2.7.4-1) UNRELEASED; urgency=low [ Arnaud Quette ] * New upstream release (Closes: #806255) * debian/patches/series: remove 0007-killpower-path.patch * debian/control: add new packages libnutclient0 and libnutclient-dev * debian/rules: adapted for the new packages * debian/libnutclient0.install, debian/libnutclient0.symbols, debian/libnutclient-dev.install, debian/libnutclient-dev.manpages: created for the new packages [ Laurent Bigonville ] * debian/gbp.conf: Switch back the branch to the "debian" one * Drop d/p/0009-fix-favorites-permissions.patch, merged upstream * d/p/0002-nut-monitor-paths.patch, d/p/0006-ups-conf-maxretry.patch: Refreshed * debian/control: Bump Standards-Version to 3.9.8 (no further changes) * debian/control: Add dh-python to the build-dependencies * Bump debhelper compatibility to 9 * d/p/0009-fix-nutshutdown-install.patch: Install the nutshutdown script in the correct path * debian/nut-server.install: 52-nut-usbups.rules file has been renamed to 62-nut-usbups.rules * debian/libnutclient0.symbols, debian/libupsclient4.symbols: Adjust the .symbols files * debian/control: Use https:// URL's in Vcs-* fields -- Laurent Bigonville Mon, 18 Jul 2016 09:53:59 +0200 nut (2.7.2-4) unstable; urgency=medium * Really fix package initial installation when PID1 is systemd (Closes: #747863) -- Laurent Bigonville Fri, 20 Mar 2015 23:12:53 +0100 nut (2.7.2-3) unstable; urgency=medium * debian/NEWS: Fix NEWS file syntax -- Laurent Bigonville Tue, 17 Feb 2015 23:13:02 +0100 nut (2.7.2-2) unstable; urgency=medium [ Laurent Bigonville ] * debian/gbp.conf: Switch to debian-jessie branch * debian/rules: Revert the changes made in the previous NMU, I don't think that dropping the .service file that late in the release cycle is a good idea and anyway this was causing left-over files on upgrade. * Add wrappers that check the MODE in /etc/nut/nut.conf to avoid starting the daemons if nut is not configured (Closes: #747863). [ Michael Fincham ] * Add patch that detects and corrects unsafe permissions on ~/.nut-monitor left over from old installations during NUT-Monitor startup. (Closes: #777706) -- Laurent Bigonville Tue, 17 Feb 2015 09:54:11 +0100 nut (2.7.2-1.1) unstable; urgency=medium * Non-maintainer upload. * Port Ubuntu change to drop upstream systemd unit files to allow sysvinit files for Jessie. (Closes: #747863) -- Neil Williams Sat, 17 Jan 2015 10:29:11 +0000 nut (2.7.2-1) unstable; urgency=low * New upstream release - Fix the undefined references (Closes: #731156) - debian/patches/0004-fix-systemd-service.patch: Refreshed - Drop d/p/0005-Provide-retry-options-for-upsdrvctl-and-drivers.patch: Merged upstream - debian/nut-server.install: Upstream is now installing upsdrvctl /sbin - Rename package libupsclient3 to libupsclient4, soname got bumped again * debian/rules, debian/control, d/p/0004-fix-systemd-service.patch: Use a symlink instead of an Alias= to mask the SysV initscript * debian/control: Bump Standards-Version to 3.9.5 (no further changes) * debian/tests/control: Add lsb-release and netcat to the dependencies (Closes: #733189) * debian/control, debian/rules: Call dh-autoreconf and pass LDFLAGS to minimize runtime dependencies * debian/patches/0008-drop-w3c-icons.patch: Remove the link to external W3C icons to prevent privacy breach (privacy-breach-w3c-valid-html) * debian/nut-server.install, debian/nut-server.manpages: Install new nutdrv_atcl_usb driver -- Laurent Bigonville Tue, 22 Apr 2014 22:46:12 +0200 nut (2.7.1-1) unstable; urgency=low * New upstream release (Closes: #730183) - Refresh debian/patches/0004-fix-systemd-service.patch - Rename libupsclient1 to libupsclient3 following the soname bump, rename libupsclient1-dev to libupsclient-dev, the package is not co-installable anyway * debian/rules, debian/control: Enable SSL support using libnss3 * d/p/0005-Provide-retry-options-for-upsdrvctl-and-drivers.patch, d/p/0006-ups-conf-maxretry.patch: By default, retry to start the drivers up-to three times, this should mitigate races with slow devices (Closes: #694717) * debian/nut-server.install, debian/nut-server.manpages: Install new drivers * Move bash-completion file to /usr/share/bash-completion/ * debian/patches/0007-killpower-path.patch: Revert POWERDOWNFLAG back to /etc/killpower * debian/nut-client.lintian-overrides: Add override for systemd-no-service-for-init-script ups-monitor * debian/rules: Drop static ordering for the initscripts and pass --restart-after-upgrade option to dh_installinit and dh_systemd_start to minimize the downtime of the daemons -- Laurent Bigonville Sun, 24 Nov 2013 20:57:51 +0100 nut (2.6.5-4) unstable; urgency=low * debian/control: Do not build nut-ipmi on hurd-i386 as freeipmi is not available on that platform. -- Laurent Bigonville Thu, 11 Jul 2013 12:29:58 +0200 nut (2.6.5-3) unstable; urgency=low [ Laurent Bigonville ] * debian/control: - Move libupsclient1 package to libs Section - Add libgd-dev to the Build-Depends, keep the other alternatives to ease the backports - Bump Standards-Version to 3.9.4 (no further changes) - Add autotools-dev to the build-dependencies so config.{guess,sub} are getting updated during build - Use canonical URL for the VCS-* fields - Add build-dependency against dh-systemd and bump minimal cdbs version so systemd helpers are called during build. * Added dep-8-tests to improve QA (from Ubuntu, closes: #708130) * debian/nut-monitor.menu, nut-monitor.xpm: Add Debian menu entry (Closes: #708813) * debian/rules: Drop manual creation of .service files symlink, this should be handled by dh_systemd now * debian/patches/0004-fix-systemd-service.patch: Also add Wants/Before for systemd-udev-settle.service in the nut-driver.service as it got renamed after udev merge * debian/patches/0004-fix-systemd-service.patch: Fix path for upsdrvctl in scripts/systemd/nutshutdown.in [ Ivo De Decker ] * debian/nut-client.preinst: also revert /etc/nut/nut.conf mangling done by postinst during upgrade from lenny to squeeze (Really closes: #677054) Thanks to Andreas Beckmann for the review. -- Laurent Bigonville Thu, 11 Jul 2013 00:50:06 +0200 nut (2.6.5-2) experimental; urgency=low [ Laurent Bigonville ] * debian/control: Move the nut-monitor Suggests from nut-server to nut-client * Restore proper SELinux context for runtime created /var/run/nut directory * debian/control: Fix typo in package description * debian/watch: Update watch file URL (Thanks to Bart Martens) * debian/rules: Alias systemd nut-monitor service file to nut-client to prevent it from running twice * d/p/0004-fix-systemd-service.patch: Fix systemd service file for Debian * Install tmpfiles conf files to create /run/nut directory during boot [ Sébastien Villemot ] * debian/nut-client.preinst: revert /etc/nut/nut.conf mangling done by older versions of the postinst (Closes: #677054) [ Ivo De Decker ] * Only fix permissions of configfiles on first install. * Only remove /etc/init.d/nut from previous versions of nut in nut-server postinst if there are no local changes. * Also remove /etc/init.d/nut in nut-client postinst. Thanks to Laurent Bigonville for the hint. -- Laurent Bigonville Thu, 31 Jan 2013 21:51:31 +0100 nut (2.6.5-1) experimental; urgency=low [ Arnaud Quette ] * debian/control, debian/nut-ipmi.{install,manpages}: create IPMI support package * debian/nut-server.install: only install USB udev rules [ Laurent Bigonville ] * New upstream release - Drop debian/patches/0001-fix-upsmon-regression.patch, applied upstream * Follow multi-arch policy * Install systemd .service files (Closes: #679450) * debian/nut-server.install: Drop newmge-shut, renamed upstream to mge-shut and install the old implementation (oldmge-shut) instead * debian/control: Drop ancient Conflicts/Provides/Replaces * Install all development files under /usr -- Laurent Bigonville Mon, 13 Aug 2012 01:59:18 +0200 nut (2.6.4-2) unstable; urgency=low * debian/rules: Stop the nut-client before nut-server on systems using static boot ordering (Closes: #679451) * debian/nut-server.postinst: Remove /etc/init.d/nut on upgrade (Closes: #677822) * Rename nut-server.lintian-overrides to nut-client.lintian-overrides and adjust overrides now that ups-monitor is shipped in nut-client package (Closes: #677947) * Add debian/patches/0001-fix-upsmon-regression.patch: Fix upsmon/upssched regression (Taken from upstream) (Closes: #679513) * Move nut metapackage to Section: metapackages * Also create nut user when installing nut-client package and do not delete it on purge anymore (Closes: #682000) * Drop /etc/default/nut → /etc/nut/nut.conf migration code, migration happends before squeeze release and this was against policy to have a maintainer script modifying a conffile in the first place (Closes: #684392) * Add dependency against adduser and lsb-base on nut-client package * Be sure that client is stopped before the server also when using dependencies based boot * Fix package descriptions (Closes: #678068) * Also install /bin/upssched-cmd in nut-client package as this script is referenced in default upssched.conf config file * debian/watch: Update watch file * Be sure that all maintainer scripts are returning 0 at their end -- Laurent Bigonville Sun, 12 Aug 2012 20:38:52 +0200 nut (2.6.4-1) unstable; urgency=high * New upstream release (Closes: #671444) * acknowledges NMU (Closes: #613643) * debian/nut-client.init: fix action "start" and use of log_*_*msg LSB log functions (Closes: #675619) * debian/nut-server.preinst: remove obsolete file(s) left in /etc/udev/rules.d and related processing: udev files are now located in /lib/udev/rules, and there is no reason to modify the dedicated USB UPS rules (52-nut-usbups.rules) (Closes: #660072) -- Arnaud Quette Wed, 06 Jun 2012 21:03:50 +0200 nut (2.6.3-2) unstable; urgency=low * debian/nut-server.init: rewrite to match upsd / drivers startup scope * debian/nut-client.init: created to match upsmon startup scope (Closes: #634858) * debian/nut.TODO.Debian, debian/Makefile.am: updated to reflect the above * debian/rules: install nut-client.init, and update to reflect the above * debian/control, debian/Makefile.am: updated to reflect the above * debian/control: - add Breaks on nut-server (<< 2.6.3-1~) - bump Standards-Version to 3.9.3 * debian/nut-client.links: renamed from debian/nut-server.links, since ups-monitor is now provided by nut-client initscript * debian/nut.README.Debian: renamed from nut-server.README.Debian, to provide it with both client and server packages * debian/nut-server.install: add missing drivers (clone-outlet, liebert-esp2 and microdowell) * debian/nut-server.manpages: add missing manual pages (apcsmart-old, ivtscd, liebert-esp2 and microdowell) -- Arnaud Quette Tue, 24 Jan 2012 13:14:59 +0100 nut (2.6.3-1) unstable; urgency=low * New upstream release (Closes: #635186, #598741, #633756, #638221) * debian/nut-server.{install,manpages}: add richcomm_usb * debian/nut-server.install, debian/rules: install Avahi service file * debian/rules, nut-client.install: install Augeas lenses * debian/nut-server.README.Debian: clarify udev explanation (Closes: #529664) * debian/patches/0001-fix_spelling_and_typo.patch, debian/patches/0003-libupsclient-version.patch: removed since these are now fixed upstream * debian/patches/series: updated -- Arnaud Quette Tue, 24 Jan 2012 13:14:59 +0100 nut (2.6.2-1) unstable; urgency=low * New upstream release (Closes: #594989) * debian/control: - remove legacy Build-Depends for nut-hal-drivers on libdbus and libglib - Build-Depends-Indep on docbook-xsl for offline document generation (Closes: #635347) * debian/nut-server.install: add apcsmart-old * debian/nut-server.init: - add udev as Required-Start/Stop (Closes: #642412) - remove legacy support for /etc/default/nut (Closes: #638021) * debian/patches/0003-libupsclient-version.patch: added to fix the missing libupsclient version info bump * debian/libupsclient1-dev.links: update link name * debian/libupsclient1.symbols: add with upscli_tryconnect * debian/nut.TODO.Debian: update and complete the TODO list -- Arnaud Quette Thu, 29 Sep 2011 18:39:16 +0200 nut (2.6.1-2) unstable; urgency=low * debian/nut.README.Debian: Adjust udev rules naming for permissions override (Closes: #529664) * Re-add and refresh debian/patches/0001-fix_spelling_and_typo.patch: Some typos and spelling errors remain. * Split nut package into nut-client and nut-server, keep nut package as metapackage * Generate PDF and html doc and install it in nut-doc package * debian/rules: - List non-installed files - Includes python-module.mk - Add flags to build documentation and install it * debian/control: - Add python-nut package and add python build-dependency - Set nut-powerman-pdu priority to extras - Add nut-monitor package - Add nut-doc package and add required C/R/P - Add libups-nut-perl package * debian/nut-server.prerm: Remove /var/run/nut during removal -- Laurent Bigonville Sun, 17 Jul 2011 19:03:18 +0200 nut (2.6.1-1) unstable; urgency=low * New upstream release (Closes: #595953, #614842, #595773) * debian/patches/*.patch: removed since these are now fixed upstream [Laurent Bigonville] * Drop HAL package and build-dependencies (Closes: #613197) * debian/control: - Bump Standards-Version to 3.9.2 (no further changes) - Drop autotools build-dependencies (not needed anymore) - Drop non-existing build-dependencies * debian/rules: - Correctly pass flags to configure -- Arnaud Quette Wed, 01 Jun 2011 22:34:28 +0200 nut (2.6.0-2) unstable; urgency=low * debian/nut-snmp.docs: Distribute snmp.txt doc file (Closes: #548295) * d/p/0001-fix_spelling_and_typo.patch: Update and refresh * debian/nut.lintian-overrides: Fix typo * debian/patch/0002-fix_libupsclient_pc.patch: Fix libupsclient.pc (Closes: #624255) * debian/rules: - Switch to cdbs - Remove not existing configure options (Closes: #611813) - Drop Phony rules (Closes: #613699) * debian/control: - Add cdbs build-dependency -- Laurent Bigonville Sun, 08 May 2011 21:23:46 +0200 nut (2.6.0-1) unstable; urgency=low * New upstream release (Closes: #575176, #588648, #609597, #687985) * debian/patches/*.patch: removed since these are now fixed upstream * debian/patches/0001-fix_spelling_and_typo.patch, debian/patches/series: reworked to match the new upstream release * debian/nut.install, debian/nut.manpages: remove obsolete reference to megatec and megatec_usb, now respectively replaced by blazer_ser and blazer_usb * debian/nut.docs: limit distributed documentation -- Arnaud Quette Wed, 16 Feb 2011 22:55:26 +0100 nut (2.4.3-3) UNRELEASED; urgency=low * debian/control: - Wrap build-dependencies - Change nut-cgi Recommends to apache2 | httpd-cgi * debian/nut.postinst: Only trigger USB subsystem, should Closes: #574769 * debian/patches/0002-fix_udev_action.patch: Use SUBSYSTEM instead of BUS -- Laurent Bigonville Tue, 11 Jan 2011 22:24:07 +0100 nut (2.4.3-2) unstable; urgency=medium * debian/control: - Bump Standards-Version to 3.9.1 - Update Vcs-* fields to new GIT repository - Add myself as Uploaders * Switch to dpkg-source 3.0 (quilt) format (Closes: #573601) * debian/patches/0001-low_speed_usb_ups.patch: Use patch system for changes that were applied directly in the source * Add debian/gbp.conf file * debian/watch: Bump version to 3 * Add debian/patches/0002-fix_udev_action.patch: Also set permission for "change" udev ACTION (Closes: #557178) * debian/nut.postrm: Do not try to remove nut user is deluser is not installed anymore * debian/nut.manpages: Install manpage nut.conf.5 (Closes: #528222) * debian/copyright: Fix copyright-with-old-dh-make-debian-copyright * Remove nut-snmp.lintian-overrides, not needed anymore * debian/patches/0003-fix_spelling_and_typo.patch: Fix some spelling errors * Add debian/libupsclient1.symbols file * Add debian/nut.links: Re-add /etc/init.d/ups-monitor that was lost for some reasons (Closes: #592351) * debian/nut.lintian-overrides: Add override for init.d-script-does-not-provide-itself /etc/init.d/ups-monitor * Drop libupsclient1.post{inst,rm}: ldconfig call is added automatically by debhelper * debian/libupsclient1-dev.install: Do not ship /lib/libupsclient.la anymore * debian/rules: Remove dpatch logic as we are using package source version '3.0 (quilt)' * debian/compat: Bump debhelper compatibility to 8 -- Laurent Bigonville Fri, 24 Dec 2010 11:46:22 +0100 nut (2.4.3-1.1) unstable; urgency=low * Non-maintainer upload. * drivers/libhid.c: Apply r2407 from upstream to fix bug with some low speed UPS devices. (Closes: #583371) -- Tim Retout Fri, 15 Oct 2010 19:31:39 +0100 nut (2.4.3-1) unstable; urgency=low * New upstream release (Closes: #544390, #528222, #539747, #526811, #562064) * debian/nut.install, debian/nut.manpages: - remove cyberpower driver and manpage - add bestfortress, clone and ivtscd drivers and manpages * debian/rules: - change udev dir to /lib/udev (Closes: #522327) - replace deprecated calls to 'dh_clean -k' by dh_prep (Closes: #536599) * debian/rules, debian/nut.install, debian/nut.install, debian/nut.README.Debian: install configuration files, without the sample suffix (Closes: #528641) * debian/nut.links: restored (Closes: #522506) * debian/nut.init: - source nut.conf instead of default/nut for POWEROFF_WAIT(Closes: #538173) - fix status checking (Closes: #538785) - improve detection of non configured system and beautify related output (Closes: #563112) - use 'invoke-rc.d' instead of calling the reboot script directly - add $remote_fs to Required-Start and Required-Stop * debian/nut.postrm: remove udev files and simplify cleanup (Closes: #541629) * debian/control: - remove Luca Filipozzi from the Uploaders list (Closes: #568987) - update Standards-Version to 3.8.4 - remove the debconf dependency - bump debhelper version to (>= 7) in Build-Depends, for dh_prep - add Breaks on nut-hal-drivers to ensure we have correct udev version * Remove debconf support since it was related to really old nut version (Closes: #518056): - remove nut-cgi.config, nut.config, nut-cgi.templates, nut.templates, and po/ directory - update nut-cgi.postinst * debian/nut.dirs: remove /var/run/nut to conform to Debian Policy * debian/nut.postint: - create /var/run/nut if needed - improve security checks * debian/nut.README.Debian: add a security note for ups.conf * debian/watch: URL update -- Arnaud Quette Wed, 24 Feb 2010 22:58:53 +0100 nut (2.4.1-3.2) unstable; urgency=low * Non-maintainer upload. * nut.postinst: fix post-processing of nut.conf to avoid overriding user settings (Closes: #531220) -- Stefano Zacchiroli Thu, 26 Nov 2009 09:30:45 +0100 nut (2.4.1-3.1) unstable; urgency=low * Non-maintainer upload. * Fix length of extended descriptions of packages in debian/control * Fix pending l10n issues. Debconf translations: - Galician (marce villarino). Closes: #524263 - Spanish (Noel David Torres Taño). Closes: #525125 - Vietnamese (Clytie Siddall). Closes: #548170 -- Christian Perrier Tue, 20 Oct 2009 21:45:21 +0200 nut (2.4.1-3) unstable; urgency=low * Debconf templates and debian/control reviewed by the debian-l10n- english team as part of the Smith review project. Closes: #520591 * [Debconf translation updates] - Japanese. Closes: #521350, #518602 - Czech. Closes: #521662 - German. Closes: #518005 - Basque. Closes: #522390 - French. Closes: #522677 - Finnish. Closes: #522837 - Swedish. Closes: #522973 - Italian. Closes: #522987 - Russian. Closes: #523122 - Portuguese. Closes: #523600 -- Christian Perrier Sat, 21 Mar 2009 08:08:59 +0100 nut (2.4.1-2) unstable; urgency=low * debian/control: - add Build-Depends libwrap0-dev to enable TCP wrappers support, - remove again dpatch from Build-Depends, - move back debconf to Depends since we don't use it anymore in the preinst, - add udev to nut-hal-drivers Depends so that it can use udevadm. * debian/rules: - pre merge the needed changes for Ubuntu (udev path and version), - deactivate again dpatch rules - move the nut-cgi HTML files off /var/www to /usr/share/nut/www - set dh_installdocs to ignore Makefile - remove dh_installexamples * debian/patches/*: removed since it doesn't address the issue * debian/nut-snmp.lintian-overrides: added to address NetSNMP overlinking * debian/nut.install: - add an precise list of the configuration files (Closes: #254355), - use a wildcard to specify the udev rules installation path * debian/nut-hal-drivers.install: use a wildcard to specify the udev rules installation path (either /etc or /lib) * debian/nut-cgi.install: add an precise list of the configuration files * debian/nut.preinst: - remove previous udev rule if unchanged, otherwise move to new filename (ie with a dash), - don't call adduser or addgroup *at all*, since these operations should be handled in the postinst, - migrate /etc/default/nut content to /etc/nut/nut.conf (part #1) * debian/nut-cgi.preinst: removed since its content is addressed by postinst. * debian/nut-hal-drivers.preinst: - remove previous udev rule if unchanged, otherwise move to new filename (ie with a dash), * debian/nut-hal-drivers.postinst: - reinstate since it was lost in the 2.2.2-10 merge, - use the safe way to install udev rules (udevadm trigger --action=change). * debian/nut.postinst: - use the safe way to install udev rules, as for nut-hal-drivers.postinst (udevadm trigger --action=change) - rework the user/group creation, and a commented add to the dialout group, - migrate /etc/default/nut content to /etc/nut/nut.conf (part #2) * debian/nut-cgi.postinst: rework the user/group creation, and a commented add to the dialout group. * debian/nut.postinst: reactivate the nut user removal upon purge * debian/nut.init: - use nut.conf instead of /etc/default/nut to start the right component(s) - enforce the configuration checking - add basic support for the status option (as required per LSB) * debian/nut.default: removed since its content has been incorporated into nut.conf * debian/{nut-cgi,nut}.examples: removed since the sample configuration files are now installed. * debian/nut.README.Debian: reworked with a lot of update and completion. * debian/nut-cgi.README.Debian: reworked with a lot of update and completion. -- Arnaud Quette Fri, 20 Feb 2009 10:09:52 +0100 nut (2.4.1-1) unstable; urgency=low * New upstream release * Acknowledge the use of debhelpers (Closes: #506583) * debian/copyright: authors and licensing (GPL2+ and GPL3+) completion * debian/control: - add a Pre-Depends on debconf for nut and nut-cgi, and remove the according Depends - add ${misc:Depends} to all Depends - add libpowerman0-dev to the Build-Depends - add a new nut-powerman-pdu package - add a Recommends on bash-completion for nut - remove Shaul Karl from the Uploaders as per his request * debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: added for the nut-powerman-pdu package * debian/nut.install: - also list the bash_completion entry - list update due to upstream changes * debian/nut.manpages: list update due to upstream changes * debian/rules: - comment the patching rules - install the nut.bash_completion script * debian/patches/*: removed the previous patches since fixed upstream * debian/patches/01_snmp_ups_no_lcrypto.dpatch: add a patch to fix snmp-ups overlinking with lcrypto (lintian possible-gpl-code-linked-with-openssl) * debian/po/es.po: added Spanish debconf template translation (Closes: 512494) * debian/po/ja.po: added Japanese debconf template translation (Closes: 512865) * debian/watch: updated for the new 2.4 tree * debian/nut.prerm: replace the direct call to the init script by invoke-rc.d -- Arnaud Quette Tue, 17 Feb 2009 14:15:24 +0100 nut (2.2.2-10) unstable; urgency=low * Merge from Ubuntu (Morten Kjeldgaard): * debian/compat: changed to 6 * debian/control: - bump Build-Depends on debhelper to (>= 6.0.7~) since we are now using dh_lintian. - add hal to Build-Depends since configure attempts to locate /usr/lib/hal in order to define callouts path and device information path * debian/rules: --prefix is back to /usr, --exec-prefix=/ and --libdir=/lib instead, which has the desired effect of moving the libraries to /lib. The many shell commands in debian/rules, for moving files from the install directory to the package directories have all been replaced by dh_* calls and matching .* files. * debian/{libupsclient1-dev.install, libupsclient1-dev.manpages, libupsclient1.install, nut-cgi.install, nut-cgi.manpages, nut-hal-drivers.install, nut-snmp.install, nut-snmp.manpages, nut-xml.install, nut-xml.manpages, nut.install, nut.lintian-overrides, nut.manpages}: added debhelper files. * debian/nut.dirs: modified debhelper files * debian/libupsclient1-dev.links: added to provide a link from /usr/lib/libupsclient.so -> /lib/libupsclient.so.1.0.0 This is a transitional measure, to salvage packages that have not yet been updated to the new library location. Can be removed sometime in the future. * debian/patches/03-configure.in.dpatch: patch to configure.in adding AC_CONFIG_MACRO_DIR([m4]) -- Arnaud Quette Thu, 27 Nov 2008 21:43:59 +0100 nut (2.2.2-9) unstable; urgency=low * debian/rules: also move libupsclient.so to /lib, otherwise the link is broken (Closes: #505101) * debian/nut-cgi.postinst: test if /etc/nut exists before chmod'ing (Closes: #502757) * debian/nut.TODO.Debian: some update and completion -- Arnaud Quette Wed, 15 Oct 2008 17:20:29 +0200 nut (2.2.2-8) unstable; urgency=high * debian/nut.links: restored since it's now handled by insserv (Closes: #500190) * debian/changelog: fix a typo error * debian/rules: move libupsclient.so.1 from /usr/lib to /lib (Closes: #491591) * debian/nut-cgi.README.Debian: fix the permissions on /etc/nut (Closes: #492277) * debian/control: add Vcs-Browser and Vcs-Svn fields -- Arnaud Quette Tue, 30 Sep 2008 21:37:59 +0200 nut (2.2.2-7) unstable; urgency=high * debian/nut.links: removed to satisfy insserv (Closes: #492734) * debian/po/it.po: add Italian debconf template translation (Closes: #495781) * debian/nut.preinst: force the nut user to be part of the extra group nut (Closes: #493159) -- Arnaud Quette Mon, 15 Sep 2008 17:18:28 +0200 nut (2.2.2-6) unstable; urgency=low * tag this bug as closed by the 2.2.2 release (Closes: #490048) * debian/nut.README.Debian: - fix the serial udev advice (Closes: #490182) - mention the UPS compatibility list (Closes: #447187) * debian/po/de.po: update German debconf template translation (Closes: #490128) * debian/changelog: fix a typo on 2.2.2-2 release urgency -- Arnaud Quette Fri, 11 Jul 2008 11:30:55 +0200 nut (2.2.2-5) unstable; urgency=low * debian/po/eu.po: add Basque debconf template translation (Closes: #489580) * debian/control: - add a Build-Depends on autoconfi, automake, libtool for the below patch - bump Depends on udev to 0.124-1 to complete the fix of #489831 * debian/rules: call autoreconf after patches application * debian/patches/02_g_timeout_add_seconds_patch.dpatch: fix compilation issue in the nut-hal-drivers code, when using a Glib older than 2.14 (Closes: #489742) * debian/nut.postint: replace the call to udevtrigger by udevadm trigger (Closes: #489831) -- Arnaud Quette Mon, 07 Jul 2008 11:04:52 +0200 nut (2.2.2-4) unstabl e; urgency=low * debian/rules: fix a Lintian warning (debian-rules-calls-debhelper-in-odd-order) * debian/po/fi.po: add Finnish debconf template translation (Closes: #489123) * debian/po/ru.po: add Russian debconf template translation (Closes: #489285) * debian/po/vi.po: update Vietnamese debconf template translation (Closes: #489393) * debian/nut.templates: remove nut/change_system_user since it is not used anymore (Closes: #486783) -- Arnaud Quette Sat, 05 Jul 2008 22:56:35 +0200 nut (2.2.2-3) unstable; urgency=low * debian/rules: reactivate dpatch support * debian/control: add dpatch back to Build-Depends * debian/patches/00list: fix the matching of the NUT HAL .fdi file (Closes: #471828) * debian/po/fr.po: update French debconf template translation (Closes: #486740) * debian.po/de.po: update the German debconf template translation (Closes: #487187) * debian/po/sv.po: add Swedish debconf template translation (Closes: #488217) * debian.po/cs.po: update the Czech debconf template translation (Closes: #488355) * debian/po/pt.po: update the Portuguese debconf template translation (Closes: #488403) * debian/po/sv.po: add Galician debconf template translation (Closes: #488380) * debian/nut.config: fix a typo in comment -- Arnaud Quette Fri, 27 Jun 2008 16:18:29 +0200 nut (2.2.2-2) unstable; urgency=low * debian/rules: fix HAL files installation paths (Closes: #486362) * debian/control: - fix conflicts (Closes: #486704, #486705) - update Standards-Version to 3.8.0 -- Arnaud Quette Fri, 20 Jun 2008 21:29:31 +0200 nut (2.2.2-1) unstable; urgency=low * New upstream release (Closes: #471828, #462468, #334105, #463150) * acknowledges NMUs (Closes: #469855) * debian/control: - add the new nut-xml package and its libneon dependency - add the new libupsclient1 and libupsclient1-dev packages, with the latter replacing nut-dev (Closes: #419684) - remove dpatch dependency * debian/rules: update according to upstream changes - replace --with-lib by --with-dev - update HAL integration - update for the nut-xml package - distribute the shared version of libupsclient - comment dpatch calls * debian/nut.postinst, debian/nut-hal-drivers.postinst: use udevtrigger to refresh the devices permissions (Closes: #469601, #475262) * debian/changelog: fix a typo * debian/nut.templates: fix the short and long descriptions * debian/libupsclient1.postinst, debian/libupsclient1.postrm: added to handle the calls to ldconfig * debian/nut.init: fix the call to /etc/init.d/reboot by adding the missing "stop" parameter (Closes: 482022) * debian/*.template: minor rework of the Debconf templates (Closes: 444151) -- Arnaud Quette Wed, 04 Jun 2008 13:35:41 +0200 nut (2.2.1-2.1) unstable; urgency=low * Non-maintainer upload. * Skip udev restart logic within chroots, closes: #469855. -- Joe Nahmias Sun, 09 Mar 2008 13:12:12 -0400 nut (2.2.1-2) unstable; urgency=low * debian/po/de.po: update the German po-debconf translation (Closes: #464466) * nut-hal-drivers.preinst: created to add to HAL user to the NUT group (Closes: #460392) * debian/nut-hal-drivers.postinst: created to complete the above by restarting udev after the rules file installation * debian/changelog: Fix some Lintian reports (syntax and spelling errors) * debian/nut.README.Debian: completed a bit more for #334105 -- Arnaud Quette Fri, 8 Feb 2008 13:48:23 +0100 nut (2.2.1-1) unstable; urgency=low * New upstream release (Closes: #439986) * acknowledges NMUs (Closes: #447961, #445000) * debian/watch: update the URL to point the 2.2 tree * debian/rules: - force --udev-dir to remove udev from Build-Depends while keeping the feature (complete #447961 fix) - limit the above fix to linux systems not to break build on bsd and hurd these architectures (Closes: #460732) - fix lintian debian-rules-ignores-make-clean-error and do some more cleanup - remove the empty directories /usr/{include,lib} from the nut package * debian/nut.postinst: call invoke-rc.d instead of the udev init script (Closes: #442331) * debian/control: - remove udev from Build-Depends - update Standards-Version to 3.7.3 - remove Homepage from description and add it as a tag - add libsnmp-dev as an alternate Build-Depends to libsnmp9-dev * debian/po/nl.po: update the Dutch po-debconf translation (Closes: #447720) * debian/po/fr.po: update the French po-debconf translation (Closes: #442102) * debian/patches/*: removed since these have been applied upstream * debian/patches/00list: emptied but kept for future use -- Arnaud Quette Wed, 23 Jan 2008 17:13:13 +0100 nut (2.2.0-2.1) unstable; urgency=low * Non-maintainer upload with Arnaud's permission. * debian/nut.postinst: restart udev only if it is running already (Closes: #447961). * debian/nut.preinst: ignore db_get errors for nut/remove_debian_conf, thanks to Alexander Gerasiov for the patch (Closes: #445000). * Fixed typo in the date of the 2.2.0-2 changelog entry (Augl -> Aug). -- Sebastian Harl Tue, 8 Jan 2008 13:50:11 +0100 nut (2.2.0-2) unstable; urgency=low * debian/control: list udev as Build-Depends to allow the udev rules inclusion (Closes: #437811) * debian/nut.default: fix a typo error on UPSMON options comment (Closes: #439407) * debian/po/: - add Brazilian Portuguese debconf templates translation (Closes: #439793) - update Portuguese debconf templates translation (Closes: 440369) - update French debconf templates translation (Closes: 440524) * debian/Makefile.am: update with the missing files * debian/patches/03_libupsclient-config.dpatch: patch for the missing FLAGS (Closes: #439985) -- Arnaud Quette Wed, 29 Aug 2007 16:14:11 +0200 nut (2.2.0-1) unstable; urgency=low * New upstream release (Closes: #432909, #420016, #426033) * debian/control: - merge the nut-usb package into nut, and update the various needed fields (Depends, Provides, Conflicts, Suggests and Description) - requires at least libhal-dev 0.5.8 - complete the nut-hal-drivers Description (Homepage) - update to policy 3.7.2 - add po-debconf to Build-Depends * debian/rules: - general rewrite since the upstream now use automake - force the evaluation of DEB_HOST_ARCH_OS for dh_gencontrol - force udev to empty on non Linux system, for dh_gencontrol - remove the DH_COMPAT export - update the nut-usb specifics, not needed anymore - nut-hal-drivers also needs the udev rules - call debconf-updatepo to clean debconf translations * debian/compat: creation * debian/nut-usb.*: remove these files, and put the content in the matching nut.* files * debian/nut.preinst: remove the old udev rule file (025_nut...) which was manually installed, and now addressed upstream and called 52_nut. * debian/nut.postinst: restart udev to apply the USB rules to the already plugged devices * debian/nut-hal-drivers.preinst: created to add the HAL user to the nut group * debian/po/nl.po: added Dutch po-debconf translation (Closes: #414756) * debian/po/pt.po: added Portuguese po-debconf translation (Closes: #415189) * debian/patches/01_udev_rules_subsystem_usb.dpatch: update the patch * debian/patches/02_libupsclient.dpatch: patch for the missing FLAGS * debian/nut.templates: rewrite and simplification * debian/nut.config: rewrite and simplification * debian/rules: call dh_installinit with the priority set to 50 to (Closes: #385694) * debian/nut.default, debian/nut.init: allow to specify options for upsd and upsmon (Closes: #420020, #434503) -- Arnaud Quette Tue, 17 Jul 2007 09:14:11 +0200 nut (2.0.5-3) unstable; urgency=low * debian/patches/01_udev_rules_subsystem_usb.dpatch: rework that patch to be more generic -- Arnaud Quette Fri, 02 Feb 2007 15:38:59 +0100 nut (2.0.5-2) unstable; urgency=low * debian/patches/*: add a patch to fix the udev rule SUBSYSTEM from usb_device to usb (thanks to Joey Hess) (Closes: #409080) * debian/control: - replace the udev substvar by udev - nut Conflicts with nut-{usb,snmps} <= 2.0.4 and nut-{usb,snmp} Depends upon 2.0.5 (Closes: #407882) * debian/rules: dh_gencontrol no more calls -V for udev -- Arnaud Quette Thu, 01 Feb 2007 14:50:49 +0100 nut (2.0.5-1) unstable; urgency=low * New upstream release (Closes: #406045, #380304, #399741) * debian/rules: - replaces CHANGES by ChangeLog - replace the dummycons installation by dummy-ups - integrate the --with-htmlpath option * debian/nut-cgi.docs: created to install data/html/README * debian/nut.init: LSB compliance update * debian/control: add lsb-base (>= 3.0-6) to Depends for LSB compliance -- Arnaud Quette Tue, 16 Jan 2007 10:42:36 +0100 nut (2.0.4-3) unstable; urgency=high * acknowledges NMUs (Closes: #396704, #389350) * debian/nut-usb.postinst: remove the symlinking of the udev file since it's not useful anymore (Closes: #400215) * native udev rules are now used (Closes: #359802, #380304) * debian/po/de.po: add German po-debconf template translation (Closes: #400285) * debian/nut.config: change the medium priorities to high (Closes: #388945) * debian/nut.init: improve drivers startup report -- Arnaud Quette Wed, 20 Dec 2006 11:07:30 +0100 nut (2.0.4-2.3) unstable; urgency=high * Non-maintainer upload. * Some polish on top of the previous NMU. * Remove the hotplug alternative; we no longer support it, so it's no longer acceptable in place of udev. Correspondingly, rename the substvar to ${udev}. (Closes: #396704) * Drop debian/nut-usbups.rules and use upstream's rules instead. Modify debian/rules correspondigly, patch from Arnaud Quette. -- Steinar H. Gunderson Fri, 17 Nov 2006 01:12:54 +0100 nut (2.0.4-2.2) unstable; urgency=high * Non-maintainer upload. * In the udev script, replace the RUN actions by MODE and GROUP actions, as per suggestion from the maintainer; should fix permission issues. (Closes: #396704) -- Steinar H. Gunderson Thu, 16 Nov 2006 15:38:43 +0100 nut (2.0.4-2.1) unstable; urgency=low * NMU * not removing nut user on purge (Closes: #389350) -- Florian M. Weps Thu, 12 Oct 2006 11:19:37 +0200 nut (2.0.4-2) unstable; urgency=low * debian/rules: replace $PWD by CURDIR to satisfy buildd * debian/nut.default, debian/nut.init: make the bug 358696 workaround optional as it might be dangerous under some circumstances (closes: #358696) -- Arnaud Quette Tue, 01 Aug 2006 08:50:26 +0200 nut (2.0.4-1) unstable; urgency=low * New upstream release - driver do not use /var anymore when called for shutdown/poweroff (closes: #332846) - fixes the newhidups crash upon device reconnexion (closes: #354305, #359769) * debian/nut.preinst: syntax enhancement to avoid issue when the nut user already exists (closes: #378970) * debian/nut-cgi.postinst: fix wrong permissions (closes: #378818) * debian/po/cs.po: update Czech translation of nut debconf messages (closes: #366738) * debian/nut.default, debian/nut.init: "poweroff" workaround to deal with BIOS default of "On/Off state: Last state" and system halting itself before the UPS cuts power (closes: #358696) * debian/nut-usbups.rules: fix the broken udev rules (closes: #359801) -- Arnaud Quette Thu, 27 Jul 2006 15:20:46 +0200 nut (2.0.3-4) unstable; urgency=low * debian/nut-usb.postinst: generate the /etc/udev/rules/ file * debian/rules: - install the right udev rule file (not the upstream one) - install the debian/hotplug file as libhidups, as it's compatible with hotplug and udev styles -- Arnaud Quette Mon, 13 Mar 2006 08:52:25 +0100 nut (2.0.3-3) unstable; urgency=low * debian/rules: - fix a wrong symlink for the udev rule files (closes: #354262) - add a temporary workaround to clean drivers/tripplite_usb -- Arnaud Quette Mon, 27 Feb 2006 15:35:32 +0100 nut (2.0.3-2) unstable; urgency=low * debian/nut.init: fix the creation of the PID directory, as /var is now volative. This bug has been identified in Ubuntu (Launchpad #6679) * debian/nut-cgi.postrm: suppress the deletion of the nut user as it's not needed (closes: #319395) * debian/nut-cgi.preinst: suppress that file as we do not need to check and create the nut user and group for nut-cgi * debian/nut-cgi.postinst: enhanced to ensure the /etc/nut directory and nut-cgi configuration files are readable by others * debian/nut-cgi.README.Debian: improve the documentation about configuration files permissions -- Arnaud Quette Fri, 24 Feb 2006 10:05:25 +0100 nut (2.0.3-1) unstable; urgency=low * New upstream release - include the improved USB driver (closes: #300115) - fix mge-utalk regression (closes: #315431) - fix USB device claiming and logging (closes: #322901) * debian/nut-cgi.config: complete the typo fixes from 2.0.2-1 and remove exit calls (closes: #308215) * debian/nut.config: remove exit calls * debian/hotplug: add this file to manage hotplug and udev style permissions settings * debian/nut-usbups.rules: embed a modified version of the upstream file * debian/control: - make hotplug | udev Depends conditionnal, from rules - remove libusb-0.1-4 Depends as it is already listed with shlibs:Depends * debian/rules: - generate debian/control Depends for hotplug | udev - also install udev files (closes: #338738, #332939) - call the clean rule before distclean * debian/nut.README.Debian: - update the Installation §2 to reflect udev changes on serial port permissions. Users need to manually add the nut group to the dialout group (closes: #325878, #334105) - some other minor update -- Arnaud Quette Tue, 21 Feb 2006 13:57:35 +0100 nut (2.0.2-2) unstable; urgency=low * debian/nut-cgi.postinst: load confmodule * debian/nut-hidups/*: remove this unneeded directory * debian/control: - Update build dependency from libsnmp5-dev to libsnmp9-dev (closes: #326410) - Changes nut-usb wrong dependency from libusb-dev to libusb-0.1-4 (closes: #320315) - add debconf (>= 0.5.00) and adduser to nut/nut-cgi Depends * debian/copyright: update the FSF address and the Authors * debian/po/vi.po: add the Vietnamese translation for debconf, from Clytie Siddall ((closes: #316327) -- Arnaud Quette Fri, 07 Oct 2005 23:35:55 +0200 nut (2.0.2-1) unstable; urgency=low * New upstream release: - build respect LDFLAGS (closes: #265439) - fix etapro brokeness (closes: #305730) - fix shutdown/restart problems with mge-shut (closes: #302190) - fix mge-utalk support for older units (closes: #315431) * debian/po/fr.po: update the French debconf templates, thanks to Michel Grentzinger (closes: #306541) * debian/rules: - install hotplug files for the newhidups USB driver - suppress the snmp-ups.8 manpage workaround * debian/nut-usb.prerm: created to remove hotplug files * debian/control: - add hotplug Depends for nut-usb - upgrade Debian Policy to 3.6.2 * debian/patches/*: remove all patch and empty 00list as all has been fixed upstream * debian/nut-cgi.config: integrate the typo fixes that was blocking upgrade from woody to sarge * debian/nut-cgi.preinst: remove an unneeded blank line * acknowledge NMU from Craig Small (closes: #302189) -- Arnaud Quette Mon, 27 Jun 2005 11:29:52 +0200 nut (2.0.1-3) unstable; urgency=low * debian/patches/01_cleanSourceFromlibupsclient.dpatch: removed as it has been fixed upstream in 2.0.1 * debian/patches/00list: re enabled for the below patch * debian/patches/01_upsstatsCgiNoHostCrash.dpatch: added while waiting for the upstream fix (closes: #302902) * debian/nut-cgi.templates: added nut-cgi/major_template_changes * debian/nut-cgi.config: use nut-cgi/major_template_changes (closes: #301184) * debian/nut-cgi.README.Debian: reworked, and mention upgrade and installation. * debian/nut.README.Debian: mention the missing UPGRADING file, and complete the upsmon.conf lines with the mandatory POWERDOWNFLAG and SHUTDOWNCMD (closes: #302182) * debian/nut.templates: add nut/2_0_upstream_changes to deal with the new changes * debian/nut.config: use the above nut/2_0_upstream_changes (closes: #301060) -- Arnaud Quette Fri, 15 Apr 2005 13:52:32 +0100 nut (2.0.1-2.1) unstable; urgency=low * Non-maintainer upload * NUT nows powersdown Closes: #302189 -- Craig Small Thu, 7 Apr 2005 11:47:58 +1000 nut (2.0.1-2) unstable; urgency=low * debian/control: add missing Build-Depends for dpatch, thanks to Kurt Roeckx (closes: #298218) -- Arnaud Quette Mon, 07 Mar 2005 16:29:32 +0100 nut (2.0.1-1) unstable; urgency=low * New upstream release (closes: #247671, #283539) * debian/watch: update URL to match the current 2.0 stable tree * debian/rules: - change install-misc target to install-lib following the upstream rule name change - error reporting enhancements, thanks to Karl Shaul (inserted a set -e at the start of every for loop ; from Debian Policy §4.5). - workaround to include dummycons test driver and its manpage in nut-dev while waiting for an upstream rule - workaround to remove snmp-ups manpage from the nut package, to avoid a file conflict with nut-snmp, while waiting for an upstream rule - remove the workaround from 1.4.2-2 to suppress libupsclient.a and newhidups upon make clean - comment the "conf files workaround" as it's no more needed * debian/control: - add nut-dev to nut Suggests - complete nut-dev to include dummycons testing driver - add libusb (>= 0.1.8) nut-usb Depends to benefit of the kernel driver unbind feature (needed for USB models other than MGE UPSs) - suppress libgd1 from Build-Depends to fix a DebCheck warning, as it is listed in Section oldlibs * debian/nut.README.Debian: add a section "(3) /etc/nut/upsd.conf" and add references to sample config files and UPGRADING information (closes: #269485) * debian/nut.TODO.Debian: add this file to track planned and unfinished tasks * debian/nut-cgi.README.Debian: improve a bit the text * debian/nut.init: test powerdown flag (upsmon -K) and use the new upsdrvctl exit codes (thanks to Karl Shaul) * debian/po/cs.po: add Czech translation of debconf templates (patch from Miroslav Kure) (closes: #283225) * debian/patches: add basic infrastructure for dpatch -- Arnaud Quette Fri, 04 Mar 2005 11:40:13 +0100 nut (1.4.3-2) unstable; urgency=low * debian/control: add nut-dev package with NUT lib and headers (closes: #263937) * debian/rules: change install-misc for the above nut-dev. * debian/control: invert apache and httpd in nut-cgi Recommends to solve a lintian warning -- Arnaud Quette Sun, 08 Aug 2004 16:07:04 +0200 nut (1.4.3-1) unstable; urgency=low * New upstream release * debian/control: change Homepage URL to "www" instead of "random" and remove trailing slash / dot (closes: #254084) * debian/control: add apache to nut-cgi Recommends to have a non-virtual package alternative -- Arnaud Quette Thu, 29 Jul 2004 22:58:03 +0200 nut (1.4.2-3) unstable; urgency=low * debian/control: add libusb-dev version in Build-Depends (closes: #248952) * debian/copyright: update upstream URL and copyright owners (closes: #242422) * debian/po/ca.po: add Catalan translation of debconf templates (patch from Aleix Badia i Bosch) (closes: #248741) * debian/nut-cgi.README.Debian: added to describe nut-cgi configuration (thanks to Marius Gedminas) (closes: #249825) * debian/nut.README.Debian: minor change -- Arnaud Quette Fri, 28 May 2004 13:10:01 +0200 nut (1.4.2-2) unstable; urgency=low * debian/control: add libusb-dev to Build-Depends (closes: #240586) * debian/rules: workaround to clean libupsclient.a and newhidups (complete the above) -- Arnaud Quette Sun, 28 Mar 2004 18:30:01 +0100 nut (1.4.2-1) unstable; urgency=low * New upstream release * Fixes mge-shut settings and shutdown problems (closes: #232402, #234037) * debian/nut.init: fixes powerdown rule to prevent from forced UPS shutoff upon normal shutdown, and add a warning when POWERDOWN flags isn't defined, thanks to Loic Le Loarer (closes: #236092) * debian/control: update nut-usb Description to reflect the add of newhidups and energizerups drivers. * debian/rules: update nut-usb build and install rules to match the new ones -- Arnaud Quette Thu, 25 Mar 2004 16:30:01 +0100 nut (1.4.1-release-2) unstable; urgency=low * recall previously malformed closed bug (closes: #227965, #227964) * debian/control: Build-Depends to allow libgd*-noxpm (closes: #231153) * debian/control: update Homepage address * debian/watch: update target address -- Arnaud Quette Thu, 05 Feb 2004 19:19:56 +0100 nut (1.4.1-release-1) unstable; urgency=low * New upstream release * debian/po/*: add gettext support for debconf templates (patch from Michel Grentzinger) (Close: #227965) * debian/po/fr.po: add French translation of debconf templates (patch from Michel Grentzinger) (Close: #227964) -- Arnaud Quette Sun, 18 Jan 2004 21:19:56 +0100 nut (1.4.1-pre3-5) unstable; urgency=low * debian/nut.postrm: fix inverted test with -z (fix a purge error) * debian/nut.postrm: same as above * debian/nut.postrm: suppress check_and_delete_group() as it is not useful * debian/nut-cgi.postrm: same as above * debian/nut.postinst: test if /etc/nut exists before chmod'ing (fix an install error) -- Arnaud Quette Sat, 15 Nov 2003 22:10:23 +0100 nut (1.4.1-pre3-4) unstable; urgency=low * debian/nut.preinst: wider check for user/group creation (closes: #217980) * debian/nut.postrm: rework purge rule for user/group deletion (2nd part of the above fix) * debian/nut-cgi.postrm: rework purge rule for user/group deletion (2nd part of the above fix) * debian/nut-cgi.preinst: wider check for user/group creation (same as above) * debian/rules: suppress {nut,nut-cgi}/etc/nut/*.sample that were wrongly installed (linked to #172217) * debian/nut.examples: created to complete above fix * debian/nut-cgi.examples: created to complete above fix * debian/nut.postrm: suppress /etc/nut/*.sample file (to correct above problem) * debian/nut-cgi.postrm: suppress /etc/nut/*.sample file (same as above) * Maintainer upload (forgotten previously), closes: #200182, #203061 -- Arnaud Quette Sat, 15 Nov 2003 10:10:23 +0100 nut (1.4.1-pre3-3) unstable; urgency=low * clients/Makefile.in: install parseconf.h to fix compilation error with wmnut * man/Makefile.in: fix a broken upstream rule (hidups manpages installed two times) that prevent from installing nut-usb package. This will be fixed in the next upstream -- Arnaud Quette Mon, 10 Nov 2003 17:10:23 +0100 nut (1.4.1-pre3-2) unstable; urgency=low * man/Makefile.in: fix a broken upstream rule (powernet and snmp-ups manpages installed two times) that prevent from installing nut-snmp package -- Arnaud Quette Mon, 10 Nov 2003 12:59:23 +0100 nut (1.4.1-pre3-1) unstable; urgency=low * New upstream release * clients/Makefile.in: suppress the one line patch to install parseconf.o (from 1.4.1-pre2-1). This is now cleanly addressed by the upstream source by installing libupsclient.a (closes: #216496) * debian/rules: change dh_shlibdeps's exclude from upsfetch.o to libupsclient.a * debian/nut.preinst: fix install rule to catch all cases of nut user and group needed creation. Previously, post purge install case was not (closes: #217980) * debian/rules: suppress the work-around for nut-usb package following the upstream correction (from 1.4.1-pre1-2) * debian/control: Final package take over ; switch Luca Filipozzi as co maintainer, and Arnaud Quette as new maintainer. * debian/watch: point the authoritative download server (penguin.harrison) and stable releases ("nut/release/1.4/" directory ; it won't work for final 1.4.1, but for 1.4.2) * debian/nut.postrm: rework purge rule to suppress a warning -- Arnaud Quette Sat, 8 Nov 2003 12:15:23 +0100 nut (1.4.1-pre2-1) unstable; urgency=low * New upstream release * debian/control: created package nut-usb for finer deps management * debian/rules: added rules for nut-usb package, and a work-around for install directories creation while waiting for upstream correction. * drivers/Makefile.in: suppressed hidups from PROGS, thanks to the above * debian/control: repeat Homepage for every sub-package * debian/control: completed nut Suggests * debian/control: changed Arnaud Quette address to the good Debian one * debian/rules: suppress the work-around for nut-snmp package following the upstream correction(from 1.4.1-pre1-1) * debian/nut-cgi.preinst: always test if nut user exist as nut-cgi can be installed without nut, so not having nut user created (closes: Bug#213730) * debian/nut-cgi.postinst: chown root:nut to address a potential security issue (see 1.2.1-2) * clients/Makefile.in: one line patch to install parseconf.o. This solve a problem with wmnut package (can't build anymore due to unresolved symbols). This point will be more cleanly address in next upstream -- Arnaud Quette Sat, 18 Oct 2003 09:05:01 +0200 nut (1.4.1-pre1-2) unstable; urgency=low * debian/control: rewrotte descriptions to follow Debian Policy. A further enhancement will be to use debian/nut.substvars (thanks to Shaul Karl) (closes: Bug#209569) * drivers/Makefile.in: added back hidups to PROGS (closes: Bug#208248) * debian/control: added libgd2-* to Build-Depends to allow more choices * debian/control: added Shaul Karl as co-maintainer * debian/control: changed Arnaud Quette address to Debian's one -- Arnaud Quette Sun, 14 Sep 2003 12:11:45 +0200 nut (1.4.1-pre1-1) unstable; urgency=low * New upstream release (closes: Bug#203856) * recall ignored 1.4.0-2 changes (closes: Bug#204193, Bug#199895) * debian/nut.preinst: already solved bug in 1.4.0-3 (closes:Bug#206229) * debian/control: created package nut-snmp (closes: Bug#195645) * debian/rules: added rules for nut-snmp package, and a work-around for install directories creation while waiting for upstream correction. * debian/control: change Build-Depends to "libgd-xpm-dev | libgd-dev" to allow easy woody backport (thanks to Martin Maney) * debian/nut.prerm: wait for upsd stop before calling the remove tempo -- Arnaud Quette Sat, 23 Aug 2003 13:55:32 +0200 nut (1.4.0-3) unstable; urgency=low * debian/nut.prerm: fix a post removal warning by adding a tempo (1 sec) before removing /var/run/nut * debian/nut.preinst: reworked install rule (thanks Shaul) (closes:Bug#204153) -- Arnaud Quette Fri, 8 Aug 2003 23:14:26 +0200 nut (1.4.0-2) unstable; urgency=low * debian/watch: update URL to point NUT 1.4 (thanks to Shaul Karl) * debian/nut.dirs: add /var/run/nut (thanks Shaul) (closes: Bug#204193) * debian/nut-cgi.preinst: created for allowing separate installation (without nut) (closes: Bug#199895) * debian/rules: remove the "--with-group=nut" call to configure as it is obsolete (thanks Shaul) * debian/control: add Arnaud Quette as co-maintainer -- Arnaud Quette Thu, 7 Aug 2003 20:14:26 +0200 nut (1.4.0-1) unstable; urgency=low * New upstream release (closes: Bug#203061) * debian/nut.init: change Init-script ordering (start_stop_server) to address data stale warning (closes: Bug#200182) -- Arnaud Quette Fri, 1 Aug 2003 18:42:22 +0200 nut (1.2.2-1) unstable; urgency=low * New upstream release * debian/rules: gidNumber of group 'nobody' is 65534 not 65535 (thanks Shaul) (closes: Bug#180532) -- Luca Filipozzi Fri, 18 Apr 2003 20:12:17 -0700 nut (1.2.1-2) unstable; urgency=low * debian/nut.README.Debian: s/smartapc/apcsmart/ (closes: Bug#177713) * debian/nut.postinst: chown root:nut instead of chown nut:nut for files in /etc/nut/* and for the dirs /etc/nut, /var/run/nut, /var/lib/nut; this addresses a potential security issue as described in the comments contained in /etc/nut/upsmon.conf (closes: Bug#180059) * debian/nut.init: sysadmins might modify POWERDOWNFLAG in /etc/nut/upsmon.conf without realizing that it is hard coded in the /etc/init.d/nut init script; fix the init script to parse the configuration file for the value of POWERDOWNFLAG (closes: Bug#179686) * debian/nut.init: print a message prior to shutdown (closes: Bug#180242) -- Luca Filipozzi Sat, 8 Feb 2003 18:12:11 -0800 nut (1.2.1-1) unstable; urgency=low * New upstream release * debian/control: nut provides/conflicts ups-monitor (closes: Bug#170655) * debian/nut.postinst and debian/nut-cgi.postinst: test -f file before chown/chmod (closes: Bug#170553) * debian/nut.postinst: fix permissions on /var/lib/nut (closes: Bug#173318) * debian/nut.preinst: change how the 'nut' user/group are detected and created (closes: Bug#173321) * between 1.1.11-1 incorrectly installed conffiles into /etc/nut with the extension .sample; fortunately, this release of the package did not migrate to testing and since 1.1.11-2 the .sample extension has not been used (closes: Bug#172217) * debian/nut.preinst: change the way the nut user/group are detected before adduser is called (closes: Bug#170653) * debian/nut.README.Debian: fixed minor doc error (Closes: Bug#173673) -- Luca Filipozzi Wed, 11 Dec 2002 19:39:02 -0800 nut (1.2.0-1) unstable; urgency=low * New upstream release * debian/nut-cgi.postinst: fix permissions on /etc/nut/hosts.conf and /etc/nut/upsset.conf so that they are world readable (Closes: Bug#167332) * debian/nut.init: added sleep 5 to allow for an orderly restart (thanks to Shaul Karl for pointing this out) -- Luca Filipozzi Tue, 19 Nov 2002 09:44:25 -0800 nut (1.1.12-1) unstable; urgency=high * New upstream release (urgency high due to SECURITY FIX) * SECURITY FIX: a file permission problem potentially exposes non-system usernames/passwords in /etc/nut/upsd.users that can be used to DoS a machine running nut by contacting the nut daemon and instructing it to power off the machine; fixed. * debian/nut.postinst: change permissions of /etc/nut/upsd.users and other conffiles to 640 (Closes: Bug#165445) * debian/nut.config: use db_fset to reset the boolean question that prompts users to accept whether to continue with the installation of this version of nut should they answer no (Closes: Bug#165376) * debian/control: make nut-cgi Replace nut so that conflicting files can be installed (Closes: Bug#165049) * drivers/Makefile.in: restored original version that doesn't build hidups, snmp-ups or powernet; hidups doesn't build on m68k; snmp-ups and powernet require libsnmp5-dev but libsnmp5-dev requires OpenSSL; unfortunately, upstream's license doesn't have the OpenSSL exclusion clause... work is proceeding on porting to gnutls * drivers/Makefile.in + debian/rules: figured out a mechanism to build hidups on those architectures that have /usr/include/linux/hiddev.h * debian/control: build-depend on libgd-xpm-dev (really closes Bug#164832) -- Luca Filipozzi Sat, 19 Oct 2002 16:47:35 -0700 nut (1.1.11-2) unstable; urgency=low * changed build dependencies to avoid depending on a pure-virtual package without providing a default (thanks Junichi Uekawa) (Closes: Bug#164832) * debian/rules calls $(MAKE) install-misc so that the header and the .o file are released with the nut package (too small for a nut-dev package?) -- Luca Filipozzi Tue, 15 Oct 2002 08:50:18 -0700 nut (1.1.11-1) unstable; urgency=low * New upstream release (Closes: Bug#151047, Bug#155943, Bug#153174, Bug#160178, Bug#164024) * the "Hey Dorothy, you aren't in Kansas anymore" release * warning: significant changes since nut 0.45.5; specifically: - upsd listens on a different port (was 3305; now 3493 (IANA-assigned)) - configuration file formats have changed - ups driver internals haved changed: 'common main.c' + upsdrvctl - some ups drivers that were not ported to the new common model have been dropped by the upstream author (submit a patch to rectify) - the init script is significantly simpler - the daemons will NOT restart on upgrade from from 0.45.5 or earlier - there is an /etc/default/nut file that defines whether the daemons will be started - removed nut-doc package... far too small to merit being on its own -- Luca Filipozzi Mon, 14 Oct 2002 13:33:58 -0700 nut (0.45.5-rel-3) unstable; urgency=low * "unlink .sock file before starting up; this was keeping the drivers down after a system crash where the .sock files remained" -- upstream (Closes: Bug#149150, Bug#139859) -- Luca Filipozzi Fri, 7 Jun 2002 22:34:53 -0700 nut (0.45.5-rel-2) unstable; urgency=low * debian/control: nut and nut-cgi suggest rather than recommend the documentation package, nut-doc (Closes: Bug#144763) * debian/nut-cgi.dirs: change absolute paths to relative (Closes: Bug#144746) * debian/rules: remove upsdrvctl.8 from package (Closes: Bug#143099) -- Luca Filipozzi Sun, 2 Jun 2002 21:39:14 -0700 nut (0.45.5-rel-1) unstable; urgency=low * New upstream release * debian/rules: moved model daemons to /lib/nut to reduce chance of namespace conflicts (Closes: Bug#141209) * debian/rules: moved sample configuration files to /usr/share/doc/nut/examples (Closes: Bug#140472) # debian/postinst: change mode and ownership of files in /etc/nut/ on configure to allow ready by nut/nut (Closes: Bug#142116) -- Luca Filipozzi Sun, 14 Apr 2002 13:37:13 -0700 nut (0.45.4-rel-3) unstable; urgency=low * added runtime dependency on adduser (Closes: Bug#137887) -- Luca Filipozzi Sat, 16 Mar 2002 21:41:53 -0800 nut (0.45.4-rel-2) unstable; urgency=low * Changed debian/rules to call install-misc which installs the development files upsfetch.[oh]. There are too few development files to merit a nut-dev package. -- Luca Filipozzi Sun, 24 Feb 2002 15:47:56 -0800 nut (0.45.4-rel-1) unstable; urgency=low * New upstream release -- Luca Filipozzi Sun, 24 Feb 2002 11:56:46 -0800 nut (0.45.4-pre5-1) unstable; urgency=low * New upstream release (Closes: Bug#131673) -- Luca Filipozzi Sun, 17 Feb 2002 17:31:32 -0800 nut (0.45.1-release-2) unstable; urgency=low * applied POWERDOWNFLAG upstream-patch (Closes: Bug#111979) * applied apcsmart calibration user-patch (Closes: Bug#111978) * modified models/main.c so that it does a forceshutdown *before* attempting to chdir into /var/lib/nut (Closes: Bug#112540) -- Luca Filipozzi Tue, 23 Oct 2001 16:22:57 -0700 nut (0.45.1-release-1) unstable; urgency=low * New upstream release * Fixed conffile problem with nut-cgi package (Closes: #108687) -- Luca Filipozzi Sat, 18 Aug 2001 11:58:57 -0700 nut (0.45.1-pre4-1) unstable; urgency=low * New upstream release (Closes: #101105) -- Luca Filipozzi Sun, 5 Aug 2001 13:59:12 -0700 nut (0.44.3-pre6-3) unstable; urgency=low * Init script now poweroffs the UPS' correctly. (Closes: #96790) * Changed section of nut-doc to 'doc' (Closes: #94842) * Not upgrading to new upstream source (0.45.0) until it is released. * Not upgrading to upstream source (0.44.3) since (0.45.0) is coming soon. -- Luca Filipozzi Sun, 3 Jun 2001 16:05:01 -0700 nut (0.44.3-pre6-2) unstable; urgency=low * init script follows policy (Closes: #90346) -- Luca Filipozzi Mon, 19 Mar 2001 15:21:44 -0800 nut (0.44.3-pre6-1) unstable; urgency=low * New upstream release * modified configure.in so that it doesn't produce an error when it tests for the existance of group "nut" (Closes: #88126) -- Luca Filipozzi Sun, 11 Mar 2001 11:48:54 -0800 nut (0.44.3-pre4-1) unstable; urgency=low * New upstream release * create pidfile modifications reworked to use upstream's writepid() function * modified init script to support these changes... note that users MUST follow the convention for the UPS directives in the sample upsd.conf; a warning has been placed in said file -- Luca Filipozzi Sun, 25 Feb 2001 19:19:29 -0800 nut (0.44.2-6) unstable; urgency=low * modified prerm and postinst so that the daemon(s) is restarted only in the postinst rather than stopped in prerm and started later in postinst thereby stopping the daemon(s) shortest possible time (Closes: #83614) * modified all the daemon(s)' source code so that they create pidfiles * modified the init script so that it uses the pidfiles -- Luca Filipozzi Sun, 11 Feb 2001 18:23:44 -0800 nut (0.44.2-5) unstable; urgency=low * removed "function" keyword from init script (Closes: #83569) * modified the pre and post scripts so that #DEBHELPER# is at the bottom * modified debian/rules so that nut-doc is created (Closes: #85059) * added support for MGE UPS (thanks to Ryan Murray) (Closes: #83743) -- Luca Filipozzi Sat, 10 Feb 2001 20:09:35 -0800 nut (0.44.2-4) unstable; urgency=low * control file changed such that arch=any for nut-doc (Closes: #83323) -- Luca Filipozzi Tue, 23 Jan 2001 17:49:25 -0800 nut (0.44.2-3) unstable; urgency=low * Added a build conflict against libgd-gif1-dev because it provides libgd-dev but does not have PNG support. (Closes: #82607) * Fixed a path problem in debian/rules that had manpages installing in /share/man/man8 instead of /usr/share/man/man8. -- Luca Filipozzi Wed, 17 Jan 2001 19:11:56 -0800 nut (0.44.2-2) unstable; urgency=low * Modified README.Debian to address bad doc path (Closes: #82460) * Slight improvements to README.Debian, as well. -- Luca Filipozzi Mon, 15 Jan 2001 21:11:39 -0800 nut (0.44.2-1) unstable; urgency=low * New upstream release -- Luca Filipozzi Tue, 9 Jan 2001 08:33:56 -0800 nut (0.44.1-4) unstable; urgency=low * fixed path problem with cgi files; they *are* in /usr/lib/cgi-bin/nut now -- Luca Filipozzi Wed, 22 Nov 2000 08:47:54 -0800 nut (0.44.1-3) unstable; urgency=low * the following changes suggested by Patrik Rak (Closes: #77144, #77195) * added better preinst(install) checks for group membership * modified upstream upsd.conf to use correct paths in the UPS directives * modified upstream upsd.conf to have better ACCESS directive examples * modified upstream upsmon.conf to have better MONITOR directive examples * modified upstream upsmon.conf to use a different POWERDOWNFLAG location (location must be on the root filesystem... otherwise powerdownflag is not found!) * modified init script to parse upsmon.conf for the POWERDOWNFLAG location * modified init script's poweroff section so that all args are recognized * improved the documentation, primarily README.Debian * installation scripts modified so that the dependency on adduser >= 3.14 can be removed; this allows for the creation of potato packages * the nut user is no longer part of the dialout group; users will have to manually change the permissions on the serial port devices; a nut group is created at the same time as the nut user; users should use the nut group for the serial port permissions: chown root.nut /dev/ttyS0 (suggested by Shaul Karl and Patrik Rak) * the cgi scripts are moved to /usr/lib/cgi-bin/nut/* (suggested by Shaul Karl) * init script changed significantly to address argument passing problems (reported by Shaul Karl) -- Luca Filipozzi Thu, 16 Nov 2000 11:42:42 -0800 nut (0.44.1-2) unstable; urgency=low * removed else clause on detection of existing "nut" user (Closes: #76721) "install" creates the user nut; "remove" doesn't remove it, "purge" does; a re-"install" would find an existing "nut" user and exit on error; fixed * fixed a possible bashism (Closes: #72711) -- Luca Filipozzi Fri, 10 Nov 2000 10:06:05 -0800 nut (0.44.1-1) unstable; urgency=low * New upstream release * serious repurcussion to existing users of nut... the configuration files have changed somewhat... a critical debconf warning informs the user of this fact * binaries are to remains in /sbin (Closes: #69525) * init script no longer relies on /usr being mounted (Closes: #70033) * -- Luca Filipozzi Fri, 10 Nov 2000 10:05:55 -0800 nut (0.44.0-4) unstable; urgency=low * Moved man pages from section 1 to section 8. (Closes: #68819) * nut-doc suggest rather than recommends nut and nut-cgi. (Closes: #69400) -- Luca Filipozzi Fri, 18 Aug 2000 23:15:18 -0700 nut (0.44.0-3) unstable; urgency=low * Minor fixes to packaging scripts (Closes: #67649). * Created new doc package: nut-doc. -- Luca Filipozzi Mon, 24 Jul 2000 10:18:19 -0700 nut (0.44.0-2) unstable; urgency=low * Minor fixes to init script and to list of undocumented binaries. -- Luca Filipozzi Sat, 22 Jul 2000 19:11:42 -0700 nut (0.44.0-1) unstable; urgency=low * New upstream release -- Luca Filipozzi Thu, 20 Jul 2000 09:26:04 -0700 nut (0.43.2-2) unstable; urgency=low * fixes: Bug#67316: nut: default permissions could reveal passwords Files in /etc/nut are now 600 by default. * fixes: Bug#67314: nut: uses old FHS directory /var/state Now uses /var/lib as per FHS guidelines. * fixes: Bug#66988: nut_0.43.2-1(unstable): Missing build dependencies Added debhelper to the build dependencies. -- Luca Filipozzi Tue, 18 Jul 2000 14:55:03 -0700 nut (0.43.2-1) unstable; urgency=low * Initial Release. * Modification to upstream source: configure.in, common/common.c, and models/upscommon.c changed to support different configuration options... --with-user and --with-group which accept a username and a groupname (rather than a uid/gid as before). * Modification to upstream source: /var/state/nut is used instead of /var/state/ups in conf/upsd.conf. -- Luca Filipozzi Wed, 3 May 2000 20:50:30 -0700 Local variables: mode: debian-changelog End: