UPSSCHED.CONF(5) ================ NAME ---- upssched.conf - Configuration for upssched timer program DESCRIPTION ----------- This file controls the operations of linkman:upssched[8], the timer-based helper program for linkman:upsmon[8]. CONFIGURATION DIRECTIVES ------------------------ *CMDSCRIPT* 'scriptname':: Required. This must be above any AT lines. This script is used to invoke commands when your timers are triggered. It receives a single argument which is the name of the timer that caused it to trigger. *PIPEFN* 'filename':: Required. This sets the file name of the socket which will be used for interprocess communications. This should be in a directory where normal users can't create the file, due to the possibility of symlinking and other evil. CAUTION: if you are running Solaris or similar, the permissions that upssched sets on this file *are not enough* to keep you safe. If your OS ignores the permissions on a FIFO, then you MUST put this in a protected directory! NOTE: by default, linkman:upsmon[8] will run upssched as whatever user you have defined with RUN_AS_USER in linkman:upsmon.conf[8]. Make sure that user can create files and write to files in the path you use for PIPEFN and LOCKFN. My recommendation: create a special directory for upssched, make it owned by your upsmon user, then use it for both. The stock version of the upssched.conf ships with PIPEFN disabled to make you visit this portion of the documentation and think about how your system works before potentially opening a security hole. *LOCKFN* 'filename':: Required. upssched attempts to create this file in order to avoid a race condition when two events are dispatched from upsmon at nearly the same time. This file will only exist briefly. It must not be created by any other process. + You should put this in the same directory as PIPEFN. *AT* 'notifytype' 'upsname' 'command':: Define a handler for a specific event 'notifytype' on UPS 'upsname'. 'upsname' can be the special value * to apply this handler to every UPS. + This will perform the command 'command' when the 'notifytype' and 'upsname' match the current activity. Possible values for 'command' are: *START-TIMER* 'timername' 'interval';; Start a timer of 'interval' seconds. When it triggers, it will pass the argument 'timername' as an argument to your CMDSCRIPT. + Example: + Start a timer that will execute when any UPS (*) has been gone for 10 seconds AT COMMBAD * START-TIMER upsgone 10 *CANCEL-TIMER* 'timername' ['cmd'];; Cancel a running timer called 'timername', if possible. If the timer has passed then pass the optional argument 'cmd' to CMDSCRIPT. + Example: + If a specific UPS (+myups@localhost+) comes back online, then stop the timer before it triggers AT COMMOK myups@localhost CANCEL-TIMER upsgone *EXECUTE* 'command';; Immediately pass 'command' as an argument to CMDSCRIPT. + Example: + If any UPS (*) reverts to utility power, then execute `ups-back-on-line` via CMDSCRIPT. AT ONLINE * EXECUTE ups-back-on-line Note that any AT that matches both the 'notifytype' and the 'upsname' for the current event will be used. For a complete list of 'notifytype' possible values, refer to the section NOTIFY EVENTS in linkman:upsmon[8]. SEE ALSO -------- linkman:upssched[8], linkman:upsmon[8] Internet resources: ~~~~~~~~~~~~~~~~~~~ The NUT (Network UPS Tools) home page: http://www.networkupstools.org/