Notes on securing NUT ===================== The NUT Team is very interested in providing the highest security level to its users. Many internal and external mechanisms exist to secure NUT. And several steps are needed to ensure that your NUT setup meets your security requirements. This chapter will present you these mechanisms, by increasing order of security level. This means that the more security you need, the more mechanisms you will have to apply. NOTE: you may want to have a look at NUT Quality Assurance, since some topics are related to NUT security and reliability. [[verifySourceSig]] How to verify the NUT source code signature ------------------------------------------- In order to verify the NUT source code signature for releases, perform the following steps: - Retrieve the link:http://www.networkupstools.org/download.html[NUT source code] (nut-X.Y.Z.tar.gz) and the matching signature (nut-X.Y.Z.tar.gz.sig) - Retrieve the link:http://www.networkupstools.org/source/nut-key.gpg[NUT maintainer's signature]: $ gpg --fetch-keys http://www.networkupstools.org/source/nut-key.gpg - Launch the GPG checking using the following command: $ gpg --verify nut-X.Y.Z.tar.gz.sig - You should see a message mentioning a "Good signature", like: gpg: Signature made Thu Jul 5 16:15:05 2007 CEST using DSA key ID 204DDF1B gpg: Good signature from "Arnaud Quette ..." ... System level privileges and ownership ------------------------------------- All configuration files should be protected so that the world can't read them. Use the following commands to accomplish this: chown root:nut /etc/nut/* chmod 640 /etc/nut/* Finally, the <> directory, which holds the communication between the driver(s) and upsd, should also be secured. chown root:nut /var/state/ups chmod 0770 /var/state/ups NUT level user privileges ------------------------- Administrative commands such as setting variables and the instant commands are powerful, and access to them needs to be restricted. NUT provides an internal mechanism to do so, through linkman:upsd.users[5]. This file defines who may access instant commands and settings, and what is available. During the initial <>, we have created a monitoring user for upsmon. You can also create an 'administrator' user with full power using: [administrator] password = mypass actions = set instcmds = all For more information on how to restrict actions and instant commands, refer to linkman:upsd.users[5] manual page. NOTE: NUT administrative user definitions should be used in conjunction with <>. Network access control ---------------------- If you are not using NUT on a standalone setup, you will need to enforce network access to upsd. There are various ways to do so. NUT LISTEN directive ~~~~~~~~~~~~~~~~~~~~ linkman:upsd.conf[5]. LISTEN interface port Bind a listening port to the interface specified by its Internet address. This may be useful on hosts with multiple interfaces. You should not rely exclusively on this for security, as it can be subverted on many systems. Listen on TCP port `port` instead of the default value which was compiled into the code. This overrides any value you may have set with `configure --with-port`. If you don't change it with configure or this value, `upsd` will listen on port 3493 for this interface. Multiple LISTEN addresses may be specified. The default is to bind to 127.0.0.1 if no LISTEN addresses are specified (and ::1 if IPv6 support is compiled in). LISTEN 127.0.0.1 LISTEN 192.168.50.1 LISTEN ::1 LISTEN 2001:0db8:1234:08d3:1319:8a2e:0370:7344 This parameter will only be read at startup. You'll need to restart (rather than reload) `upsd` to apply any changes made here. Firewall ~~~~~~~~ NUT has its own official IANA port: 3493/tcp. The `upsmon` process on slave systems, as well as any other NUT client (such as `upsc`, `upscmd`, `upsrw`, NUT-Monitor, ...) connects to the `upsd` process on the master system via this TCP port. The `upsd` process does not connect out. You should use this to restrict network access. [[UFW]] include::../scripts/ufw/README[] [[TCP_Wrappers]] TCP Wrappers ~~~~~~~~~~~~ If the server is build with tcp-wrappers support enabled, it will check if the NUT username is allowed to connect from the client address through the '/etc/hosts.allow' and '/etc/hosts.deny' files. NOTE: this will only be done for commands that require the user to be logged into the server. `hosts.allow`: ups : admin@127.0.0.1/32 ups : monslave@127.0.0.1/32 monslave@192.168.1.0/24 `hosts.deny`: upsd : ALL Further details are described in hosts_access(5). Configuring SSL --------------- SSL is available as a build option ('--with-ssl'). It encrypts sessions between upsd and clients, and can also be used to authenticate servers. This means that stealing port 3493 from upsd will no longer net you interesting passwords. Several things must happen before this will work, however. This chapter will present these steps. SSL is available via two back-end libraries : NSS and OpenSSL (historically). You can choose to use one of them by specifying it with abuild option ('--with-nss' or '--with-openssl'). If any is specified, configure script will try to detect one of them and use it with a precedence for OpenSSL. OpenSSL backend usage ~~~~~~~~~~~~~~~~~~~~~ This section describes how to enable NUT SSL support using link:http://www.openssl.org[OpenSSL]. Install OpenSSL ^^^^^^^^^^^^^^^ Install link:http://www.openssl.org[OpenSSL] as usual, either from source or binary packages including nss-tools. Recompile and install NUT ^^^^^^^^^^^^^^^^^^^^^^^^^ Recompile NUT from source, starting with 'configure --with-openssl'. Then install everything as usual. Create a certificate and key for upsd ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ openssl (the program) should be in your PATH, unless you installed it from source yourself, in which case it may be in /usr/local/ssl/bin. Use the following command to create the certificate: openssl req -new -x509 -nodes -out upsd.crt -keyout upsd.key You can also put a '-days nnn' in there to set the expiration. If you skip this, it may default to 30 days. This is probably not what you want. It will ask several questions. What you put in there doesn't matter a whole lot, since nobody is going to see it for now. Future versions of the clients may present data from it, so you might use this opportunity to identify each server somehow. Figure out the hash for the key ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use the following command to determine the hash of the certificate: openssl x509 -hash -noout -in upsd.crt You'll get back a single line with 8 hex characters. This is the hash of the certificate, which is used for naming the client-side certificate. For the purposes of this example the hash is *0123abcd*. Install the client-side certificate ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use the following commands to install the client-side certificate: mkdir chmod 0755 cp upsd.crt /.0 Example: mkdir /usr/local/ups/etc/certs chmod 0755 /usr/local/ups/etc/certs cp upsd.crt /usr/local/ups/etc/certs/0123abcd.0 If you already have a file with that name in there, increment the 0 until you get a unique filename that works. If you have multiple client systems (like upsmon slaves), be sure to install this file on them as well. We recommend making a directory under your existing confpath to keep everything in the same place. Remember the path you created, since you will need to put it in upsmon.conf later. It must not be writable by unprivileged users, since someone could insert a new client certificate and fool upsmon into trusting a fake upsd. Create the combined file for upsd ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ To do so, use the below commands: cat upsd.crt upsd.key > upsd.pem chown root:nut upsd.pem chmod 0640 upsd.pem This file must be kept secure, since anyone possessing it could pretend to be upsd and harvest authentication data if they get a hold of port 3493. Having it be owned by 'root' and readable by group 'nut' allows upsd to read the file without being able to change the contents. This is done to minimize the impact if someone should break into upsd. Note on certification authorities (CAs) and signed keys ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ There are probably other ways to handle this, involving keys which have been signed by a CA you recognize. Contact your local SSL guru. Install the server-side certificate ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Install the certificate with the following command: mv upsd.pem Example: mv upsd.pem /usr/local/ups/etc/upsd.pem After that, edit your upsd.conf and tell it where to find it: CERTFILE /usr/local/ups/etc/upsd.pem Clean up the temporary files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ rm -f upsd.crt upsd.key Restart upsd ^^^^^^^^^^^^ It should come back up without any complaints. If it says something about keys or certificates, then you probably missed a step. If you run upsd as a separate user id (like nutsrv), make sure that user can read the upsd.pem file. Point upsmon at the certificates ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Edit your upsmon.conf, and tell it where the CERTPATH is: CERTPATH Example: CERTPATH /usr/local/ups/etc/certs Recommended: make upsmon verify all connections with certificates ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Put this in upsmon.conf: CERTVERIFY 1 Without this, there is no guarantee that the upsd is the right host. Enabling this greatly reduces the risk of man in the middle attacks. This effectively forces the use of SSL, so don't use this unless all of your upsd hosts are ready for SSL and have their certificates in order. Recommended: force upsmon to use SSL ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Again in upsmon.conf: FORCESSL 1 If you don't use 'CERTVERIFY 1', then this will at least make sure that nobody can sniff your sessions without a large effort. Setting this will make upsmon drop connections if the remote upsd doesn't support SSL, so don't use it unless all of them have it running. NSS backend usage ~~~~~~~~~~~~~~~~~ This section describes how to enable NUT SSL support using link:http://www.mozilla.org/projects/security/pki/nss/[Mozilla NSS]. Install NSS ^^^^^^^^^^^ Install link:http://www.mozilla.org/projects/security/pki/nss/[Mozilla NSS] as usual, either from source or binary packages. Recompile and install NUT ^^^^^^^^^^^^^^^^^^^^^^^^^ Recompile NUT from source, starting with 'configure --with-nss'. Then install everything as usual. Create certificate and key for the host ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ NSS (package generally called libnss3-tools) will install a tool called 'certutil'. It will be used to generate certificates and manage certificate database. Certificates should be signed by a certification authorities (CAs). Following commands are typical samples, contact your SSL guru or security officer to follow your company procedures. .Generate a server certificate for upsd: - Create a directory where store the certificate database: 'mkdir cert_db' - Create the certificate database : 'certutil -N -d cert_db' - Import the CA certificate: 'certutil -A -d cert_db -n "My Root CA" -t "TC,," -a -i rootca.crt' - Create a server certificate request (here called 'My nut server'): 'certutil -R -d cert_db -s "CN=My nut server,O=MyCompany,ST=MyState,C=US" -a -o server.req' - Make your CA sign the certificate (produces server.crt) - Import the signed certificate into server database: 'certutil -A -d cert_db -n "My nut server" -a -i server.crt -t ",,"' - Display the content of certificate server: 'certutil -L -d cert_db' Clients and servers in the same host could share the same certificate to authentify them or use different ones in same or different databases. The same operation can be done in same or different databases to generate other certificates. Create a self-signed CA certificate ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ NSS provides a way to create self-signed certificate which can acting as CA certificate and to sign other certificates with this CA certificate. This method can be used to provide CA certification chain without passing by an 'official' CA provider. .Generate a self-signed CA certificate: - Create a directory where store the CA certificate database: 'mkdir CA_db' - Create the certificate database: 'certutil -N -d CA_db' - Generate a certificate for CA: 'certutil -S -d CA_db -n "My Root CA" -s "CN=My CA,O=MyCompany,ST=MyState,C=US" -t "CT,," -x -2' Do not forget to answer 'Yes' to the question 'Is this a CA certificate [y/N]?' - Extract the CA certificate to be able to import it in upsd (or upsmon) certificate database: 'certutil -L -d CA_db -n "My Root CA" -a -o rootca.crt' - Sign a certificate request with the CA certificate (simulate a real CA signature): 'certutil -C -d CA_db -c "My Root CA" -a -i server.req -o server.crt -2 -6' Install the server-side certificate ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Just copy the database directory (just the directory and included 3 database .db files) at the right place like in '/usr/local/ups/etc/': mv cert_db /usr/local/ups/etc/ upsd (required): certificate database and self certificate ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Edit the upsd.conf to tell where find the certificate database: CERTPATH /usr/local/ups/etc/cert_db Also tell which is the certificate to send to clients to authenticate itself and the password to decrypt private key associated to certificate: CERTIDENT 'certificate name' 'database password' NOTE: Generally, the certificate name is the server domain name, but is not a hard rule. The certificate can be named as useful. upsd (optional): client authentication ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ NOTE: This functionality is disabled by default. To activate it, recompile NUT with 'WITH_CLIENT_CERTIFICATE_VALIDATION' defined: make CFLAGS="-DWITH_CLIENT_CERTIFICATE_VALIDATION" UPSD can accept three levels of client authentication. Just specify it with the directive 'CERTREQUEST' with the corresponding value in the upsd.conf file: - NO: no client authentication. - REQUEST: a certificate is request to the client but it is not strictly validated. If the client does not send any certificate, the connection is closed. - REQUIRE: a certificate is requested to the client and if it is not valid (no validation chain) the connection is closed. Like CA certificates, you can add many 'trusted' client and CA certificates in server's certificate databases. upsmon (required): upsd authentication ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ In order for upsmon to securely connect to upsd, it must authenticate it. You must associate an upsd host name to security rules in upsmon.conf with the directive 'CERTHOST'. 'CERTHOST' associate to an hostname a certificate name and if a SSL connection is mandatory and if its certificate must be validated. CERTHOST 'hostname' 'certificate name' 'certverify' 'forcessl' If the flag 'forcessl' is set to '1' and the upsd answer that it can not connect in SSL, the connection closes. If the flag 'certverify' is set to '1' and the connection is done in ssl, upsd's certificate is verified and its name must be the specified 'certificate name'. To prevent security leaks, you should set all 'certverify' and 'forcessl' flags to '1' (force SSL connection and validate all certificates for all peers). You can specify 'CERTVERIFY' and 'FORCESSL' directive (to '1' or '0') to define a default security rule to apply to all host not specified with a dedicated 'CERTHOST' directive. If a host is not specified in a 'CERTHOST' directive, its expected certificate name is its hostname. upsmon (optional): certificate database and self certificate ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Like upsd, upsmon may need to authenticate itself (upsd's 'CERTREQUEST' directive set to 'REQUEST' or 'REQUIRE'). It must access to a certificate (and its private key) in a certificate database configuring 'CERTPATH' and 'CERTIDENT' in upsmon.conf in the same way than upsd. CERTPATH /usr/local/ups/etc/cert_db CERTIDENT 'certificate name' 'database password' Restart upsd ~~~~~~~~~~~~ It should come back up without any complaints. If it says something about keys or certificates, then you probably missed a step. If you run upsd as a separate user id (like nutsrv), make sure that user can read files in certificate directory. Restart upsmon ~~~~~~~~~~~~~~ You should see something like this in the syslog from upsd: foo upsd[1234]: Client mon@localhost logged in to UPS [myups] (SSL) If upsd or upsmon give any error messages, or the (SSL) is missing, then something isn't right. If in doubt about upsmon, start it with -D so it will stay in the foreground and print debug messages. It should print something like this every couple of seconds: polling ups: myups@localhost [SSL] Obviously, if the '[SSL]' isn't there, something's broken. Recommended: sniff the connection to see it for yourself ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Using tcpdump, Wireshark (Ethereal), or another network sniffer tool, tell it to monitor port 3493/tcp and see what happens. You should only see 'STARTTLS' go out, 'OK STARTTLS' come back, and the rest will be certificate data and then seemingly random characters. If you see any plaintext besides that (USERNAME, PASSWORD, etc.) then something is not working. Potential problems ~~~~~~~~~~~~~~~~~~ If you specify a certificate expiration date, you will eventually see things like this in your syslog: Oct 29 07:27:25 rktoy upsmon[3789]: Poll UPS [for750@rktoy] failed - SSL error: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE: certificate verify failed You can verify that it is expired by using openssl to display the date: openssl x509 -enddate -noout -in It'll display a date like this: notAfter=Oct 28 20:05:32 2002 GMT If that's after the current date, you need to generate another cert/key pair using the procedure above. Conclusion ~~~~~~~~~~ SSL support should be considered stable but purposely underdocumented since various bits of the implementation or configuration may change in the future. In other words, if you use this and it stops working after an upgrade, come back to this file to find out what changed. This is why the other documentation doesn't mention any of these directives yet. SSL support is a treat for those of you that RTFM. There are also potential licensing issues for people who ship binary packages since NUT is GPL and OpenSSL is not compatible with it. You can still build and use it yourself, but you can't distribute the results of it. Or maybe you can. It depends on what you consider "essential system software", and some other legal junk that we're not going to touch. Other packages have solved this by explicitly stating that an exception has been granted. That is (purposely) impossible here, since NUT is the combined effort of many people, and all of them would have to agree to a license change. This is actually a feature, since it means nobody can unilaterally run off with the source - not even the NUT team. Note that the replacement of OpenSSL by Mozilla Network Security Services (NSS) is scheduled in the future, to avoid the above licensing issues. chrooting and other forms of paranoia ------------------------------------- It has been possible to run the drivers and upsd in a chrooted jail for some time, but it involved a number of evil hacks. From the 1.3 series, a much saner chroot behavior exists, using BIND 9 as an inspiration. The old way involved creating an entire tree, complete with libraries, a shell (!), and many auxiliary files. This was hard to maintain and could have become an interesting playground for an intruder. The new way is minimal, and leaves little in the way of usable materials within the jail. This document assumes that you already have created at least one user account for the software to use. If you're still letting it fall back on "nobody", stop right here and go figure that out first. It also assumes that you have everything else configured and running happily all by itself. Generalities ~~~~~~~~~~~~ Essentially, you need to create your configuration directory and state path in their own little world, plus a special device or two. For the purposes of this example, the chroot jail is /chroot/nut. The programs have been built with the default prefix, so they are using /usr/local/ups. First, create the confpath and bring over a few files. mkdir -p /chroot/nut/usr/local/ups/etc cd /chroot/nut/usr/local/ups/etc cp -a /usr/local/ups/etc/upsd.users . cp -a /usr/local/ups/etc/upsd.conf . cp -a /usr/local/ups/etc/ups.conf . We're using 'cp -a' to maintain the permissions on those files. Now bring over your state path, maintaining the same permissions as before. mkdir -p /chroot/nut/var/state cp -a /var/state/ups /chroot/nut/var/state Next we must put /etc/localtime inside the jail, or you may get very strange readings in your syslog. You'll know you have this problem if upsd shows up as UTC in the syslog while the rest of the system doesn't. mkdir -p /chroot/nut/etc cp /etc/localtime /chroot/nut/etc Note that this is not "cp -a", since we want to copy the *content*, not the symlink that it may be on some systems. Finally, create a tiny bit of /dev so the programs can enter the background properly - they redirect fds into the bit bucket to make sure nothing else grabs 0-2. mkdir -p /chroot/nut/dev cp -a /dev/null /chroot/nut/dev Try to start your driver(s) and make sure everything fires up as before. upsdrvctl -r /chroot/nut -u nutdev start Once your drivers are running properly, try starting upsd. upsd -r /chroot/nut -u nutsrv Check your syslog. If nothing is complaining, try running clients like upsc and upsmon. If they seem happy, then you're done. symlinks ~~~~~~~~ After you do this, you will have two copies of many things, like the confpath and the state path. I recommend deleting the 'real' /var/state/ups, replacing it with a symlink to /chroot/nut/var/state/ups. That will let other programs reference the .pid files without a lot of hassle. You can also do this with your confpath and point /usr/local/ups/etc at /chroot/nut/usr/local/ups/etc unless you're worried about something hurting the files inside that directory. In that case, you should maintain a 'master' copy and push it into the chroot path after making changes. upsdrvctl itself does not chroot, so the ups.conf still needs to be in the usual confpath. upsmon ~~~~~~ This has not yet been applied to upsmon, since it can be quite complicated when there are notifiers that need to be run. One possibility would be for upsmon to have three instances: - privileged root parent that listens for a shutdown command - unprivileged child that listens for notify events - unprivileged chrooted child that does network I/O This one is messy, and may not happen for some time, if ever. Config files ~~~~~~~~~~~~ You may now set chroot= and user= in the global section of ups.conf. upsd chroots before opening any config files, so there is no way to add support for that in upsd.conf at the present time.