nut-debian/tools/nut-scanner/scan_eaton_serial.c

658 lines
19 KiB
C
Raw Normal View History

2016-07-18 03:11:41 +03:00
/*
* Copyright (C) 2012 - EATON
2022-07-10 10:23:45 +03:00
* Copyright (C) 2016-2021 - EATON - Various threads-related improvements
2013-11-24 17:00:12 +02:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
2016-07-18 03:11:41 +03:00
/*! \file scan_eaton_serial.c
\brief detect Eaton serial XCP, SHUT and Q1 devices
\author Arnaud Quette <ArnaudQuette@eaton.com>
2022-07-10 10:23:45 +03:00
\author Jim Klimov <EvgenyKlimov@eaton.com>
2016-07-18 03:11:41 +03:00
*/
2013-11-24 17:00:12 +02:00
#include "common.h"
2022-07-10 10:23:45 +03:00
#include "nut-scan.h"
2013-11-24 17:00:12 +02:00
/* Need this on AIX when using xlc to get alloca */
#ifdef _AIX
#pragma alloca
#endif /* _AIX */
#include <fcntl.h>
#include <stdio.h>
2022-07-10 10:23:45 +03:00
#if (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_PUSH_POP) && (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES)
# pragma GCC diagnostic push
# pragma GCC diagnostic ignored "-Wstrict-prototypes"
#endif
#ifdef HAVE_SYS_SIGNAL_H
# include <sys/signal.h>
#endif
#ifdef HAVE_SIGNAL_H
# include <signal.h>
#endif
#if (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_PUSH_POP) && (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES)
# pragma GCC diagnostic pop
#endif
2013-11-24 17:00:12 +02:00
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "serial.h"
#include "bcmxcp_io.h"
2022-07-10 10:23:45 +03:00
#include "bcmxcp_ser.h"
2013-11-24 17:00:12 +02:00
#include "bcmxcp.h"
#include "nutscan-serial.h"
/* SHUT header */
#define SHUT_SYNC 0x16
#define MAX_TRY 4
2022-07-10 10:23:45 +03:00
/* BCMXCP header defines these externs now: */
/*
extern unsigned char BCMXCP_AUTHCMD[4];
2013-11-24 17:00:12 +02:00
extern struct pw_baud_rate {
2022-07-10 10:23:45 +03:00
int rate;
int name;
2013-11-24 17:00:12 +02:00
} pw_baud_rates[];
2022-07-10 10:23:45 +03:00
*/
2013-11-24 17:00:12 +02:00
/* Local list of found devices */
static nutscan_device_t * dev_ret = NULL;
/* Remap some functions to avoid undesired behavior (drivers/main.c) */
2022-07-10 10:23:45 +03:00
char *getval(const char *var)
{
NUT_UNUSED_VARIABLE(var);
return NULL;
}
2013-11-24 17:00:12 +02:00
#ifdef HAVE_PTHREAD
static pthread_mutex_t dev_mutex;
#endif
/* Drivers name */
#define SHUT_DRIVER_NAME "mge-shut"
#define XCP_DRIVER_NAME "bcmxcp"
#define Q1_DRIVER_NAME "blazer_ser"
/* Fake driver main, for using serial functions, needed for bcmxcp_ser.c */
char *device_path;
int upsfd;
int exit_flag = 0;
int do_lock_port;
/* Functions extracted from drivers/bcmxcp.c, to avoid pulling too many things
* lightweight function to calculate the 8-bit
* two's complement checksum of buf, using XCP data length (including header)
* the result must be 0 for the sequence data to be valid */
int checksum_test(const unsigned char *buf)
{
unsigned char checksum = 0;
int i, length;
/* buf[2] is the length of the XCP frame ; add 5 for the header */
length = (int)(buf[2]) + 5;
for (i = 0; i < length; i++) {
checksum += buf[i];
}
/* Compute the 8-bit, Two's Complement checksum now and return it */
checksum = ((0x100 - checksum) & 0xFF);
return (checksum == 0);
}
unsigned char calc_checksum(const unsigned char *buf)
{
unsigned char c;
int i;
c = 0;
2022-07-10 10:23:45 +03:00
for (i = 0; i < 2 + buf[1]; i++)
2013-11-24 17:00:12 +02:00
c -= buf[i];
return c;
}
/*******************************************************************************
* SHUT functions (MGE legacy, but Eaton path forward)
******************************************************************************/
/* Light version of of drivers/libshut.c->shut_synchronise()
* return 1 if OK, 0 otherwise */
2022-07-10 10:23:45 +03:00
static int shut_synchronise(int arg_upsfd)
2013-11-24 17:00:12 +02:00
{
int try;
2022-07-10 10:23:45 +03:00
unsigned char reply = '\0';
/* FIXME? Should we save "arg_upsfd" into global "upsfd" variable?
* This was previously shadowed by function argument named "upsfd"...
*/
/* upsfd = arg_upsfd; */
2013-11-24 17:00:12 +02:00
/* Sync with the UPS according to notification */
for (try = 0; try < MAX_TRY; try++) {
2022-07-10 10:23:45 +03:00
if ((ser_send_char(arg_upsfd, SHUT_SYNC)) == -1) {
2013-11-24 17:00:12 +02:00
continue;
}
2022-07-10 10:23:45 +03:00
ser_get_char(arg_upsfd, &reply, 1, 0);
2013-11-24 17:00:12 +02:00
if (reply == SHUT_SYNC) {
return 1;
}
}
return 0;
}
/* SHUT scan:
* send SYNC token (0x16) and receive the SYNC token back
* FIXME: maybe try to get device descriptor?!
*/
2022-07-10 10:23:45 +03:00
static nutscan_device_t * nutscan_scan_eaton_serial_shut(const char* port_name)
2013-11-24 17:00:12 +02:00
{
nutscan_device_t * dev = NULL;
int devfd = -1;
2022-07-10 10:23:45 +03:00
if ((devfd = ser_open_nf(port_name)) != -1) {
2013-11-24 17:00:12 +02:00
/* set RTS to off and DTR to on to allow correct behavior
* with UPS using PnP feature */
if (ser_set_dtr(devfd, 1) != -1) {
ser_set_rts(devfd, 0);
ser_set_speed_nf(devfd, port_name, B2400);
if (shut_synchronise(devfd)) {
/* Communication established successfully! */
dev = nutscan_new_device();
dev->type = TYPE_EATON_SERIAL;
dev->driver = strdup(SHUT_DRIVER_NAME);
dev->port = strdup(port_name);
#ifdef HAVE_PTHREAD
pthread_mutex_lock(&dev_mutex);
#endif
dev_ret = nutscan_add_device_to_device(dev_ret, dev);
#ifdef HAVE_PTHREAD
pthread_mutex_unlock(&dev_mutex);
#endif
}
}
/* Close the device */
ser_close(devfd, NULL);
}
return dev;
}
/*******************************************************************************
* XCP functions (Eaton Powerware legacy)
******************************************************************************/
/* XCP scan:
* baudrate nego (...)
* Send ESC to take it out of menu
* Wait 90ms
* Send auth command (AUTHOR[4] = {0xCF, 0x69, 0xE8, 0xD5};)
* Wait 500ms (or less?)
* Send PW_SET_REQ_ONLY_MODE command (0xA0) and wait for response
* [Get ID Block (PW_ID_BLOCK_REQ) (0x31)]
*/
2022-07-10 10:23:45 +03:00
static nutscan_device_t * nutscan_scan_eaton_serial_xcp(const char* port_name)
2013-11-24 17:00:12 +02:00
{
nutscan_device_t * dev = NULL;
2022-07-10 10:23:45 +03:00
int i, devfd = -1;
ssize_t ret;
2013-11-24 17:00:12 +02:00
unsigned char answer[256];
unsigned char sbuf[128];
memset(sbuf, 0, 128);
2022-07-10 10:23:45 +03:00
if ((devfd = ser_open_nf(port_name)) != -1) {
2013-11-24 17:00:12 +02:00
#ifdef HAVE_PTHREAD
pthread_mutex_lock(&dev_mutex);
#endif
upsfd = devfd;
#ifdef HAVE_PTHREAD
pthread_mutex_unlock(&dev_mutex);
#endif
2022-07-10 10:23:45 +03:00
for (i = 0; (pw_baud_rates[i].rate != 0) && (dev == NULL); i++)
2013-11-24 17:00:12 +02:00
{
memset(answer, 0, 256);
if (ser_set_speed_nf(devfd, port_name, pw_baud_rates[i].rate) == -1)
break;
ret = ser_send_char(devfd, 0x1d); /* send ESC to take it out of menu */
if (ret <= 0)
break;
usleep(90000);
2022-07-10 10:23:45 +03:00
send_write_command(BCMXCP_AUTHCMD, 4);
2013-11-24 17:00:12 +02:00
usleep(500000);
2022-07-10 10:23:45 +03:00
2013-11-24 17:00:12 +02:00
/* Discovery with Baud Hunting (XCP protocol spec. §4.1.2)
* sending PW_SET_REQ_ONLY_MODE should be enough, since
* the unit should send back Identification block */
sbuf[0] = PW_COMMAND_START_BYTE;
sbuf[1] = (unsigned char)1;
sbuf[2] = PW_SET_REQ_ONLY_MODE;
sbuf[3] = calc_checksum(sbuf);
ret = ser_send_buf_pace(devfd, 1000, sbuf, 4);
/* Read PW_COMMAND_START_BYTE byte */
ret = ser_get_char(devfd, answer, 1, 0);
#if 0
/* FIXME: seems not needed, but requires testing with more devices! */
if (ret <= 0) {
usleep(250000); /* 500000? */
memset(answer, 0, 256);
ret = command_sequence(&id_command, 1, answer);
}
#endif
2022-07-10 10:23:45 +03:00
if ((ret > 0) && (answer[0] == PW_COMMAND_START_BYTE)) {
2013-11-24 17:00:12 +02:00
dev = nutscan_new_device();
dev->type = TYPE_EATON_SERIAL;
dev->driver = strdup(XCP_DRIVER_NAME);
dev->port = strdup(port_name);
#ifdef HAVE_PTHREAD
pthread_mutex_lock(&dev_mutex);
#endif
dev_ret = nutscan_add_device_to_device(dev_ret, dev);
#ifdef HAVE_PTHREAD
pthread_mutex_unlock(&dev_mutex);
#endif
break;
}
usleep(100000);
}
/* Close the device */
ser_close(devfd, NULL);
}
return dev;
}
/*******************************************************************************
* Q1 functions (Phoenixtec/Centralion/Santak, still Eaton path forward)
******************************************************************************/
#define SER_WAIT_SEC 1 /* 3 seconds for Best UPS */
#define MAXTRIES 3
/* Q1 scan:
* - open the serial port and set the speed to 2400 baud
* - simply try to get Q1 (status) string
* - check its size and first char. which should be '('
*/
2022-07-10 10:23:45 +03:00
static nutscan_device_t * nutscan_scan_eaton_serial_q1(const char* port_name)
2013-11-24 17:00:12 +02:00
{
nutscan_device_t * dev = NULL;
struct termios tio;
2022-07-10 10:23:45 +03:00
ssize_t ret = 0;
int retry;
2013-11-24 17:00:12 +02:00
int devfd = -1;
char buf[128];
2022-07-10 10:23:45 +03:00
if ((devfd = ser_open_nf(port_name)) != -1) {
2013-11-24 17:00:12 +02:00
if (ser_set_speed_nf(devfd, port_name, B2400) != -1) {
if (!tcgetattr(devfd, &tio)) {
/* Use canonical mode input processing (to read reply line) */
tio.c_lflag |= ICANON; /* Canonical input (erase and kill processing) */
tio.c_cc[VEOF] = _POSIX_VDISABLE;
tio.c_cc[VEOL] = '\r';
tio.c_cc[VERASE] = _POSIX_VDISABLE;
tio.c_cc[VINTR] = _POSIX_VDISABLE;
tio.c_cc[VKILL] = _POSIX_VDISABLE;
tio.c_cc[VQUIT] = _POSIX_VDISABLE;
tio.c_cc[VSUSP] = _POSIX_VDISABLE;
tio.c_cc[VSTART] = _POSIX_VDISABLE;
tio.c_cc[VSTOP] = _POSIX_VDISABLE;
if (!tcsetattr(devfd, TCSANOW, &tio)) {
/* Set the default (normal) cablepower */
ser_set_dtr(devfd, 1);
ser_set_rts(devfd, 0);
/* Allow some time to settle for the cablepower */
usleep(100000);
/* Only try pure 'Q1', not older ones like 'D' or 'QS'
* > [Q1\r]
* < [(226.0 195.0 226.0 014 49.0 27.5 30.0 00001000\r]
*/
for (retry = 1; retry <= MAXTRIES; retry++) {
/* simplified code */
ser_flush_io(devfd);
2022-07-10 10:23:45 +03:00
if ((ret = ser_send(devfd, "Q1\r")) > 0) {
2013-11-24 17:00:12 +02:00
/* Get Q1 reply */
2022-07-10 10:23:45 +03:00
if ((ret = ser_get_buf(devfd, buf, sizeof(buf), SER_WAIT_SEC, 0)) > 0) {
2013-11-24 17:00:12 +02:00
/* Check answer */
/* should at least (and most) be 46 chars */
if (ret >= 46) {
if (buf[0] == '(') {
dev = nutscan_new_device();
dev->type = TYPE_EATON_SERIAL;
dev->driver = strdup(Q1_DRIVER_NAME);
dev->port = strdup(port_name);
#ifdef HAVE_PTHREAD
pthread_mutex_lock(&dev_mutex);
#endif
dev_ret = nutscan_add_device_to_device(dev_ret, dev);
#ifdef HAVE_PTHREAD
pthread_mutex_unlock(&dev_mutex);
#endif
break;
}
}
}
}
}
}
}
}
/* Close the device */
ser_close(devfd, NULL);
}
return dev;
}
static void * nutscan_scan_eaton_serial_device(void * port_arg)
{
nutscan_device_t * dev = NULL;
char* port_name = (char*) port_arg;
/* Try SHUT first */
2022-07-10 10:23:45 +03:00
if ((dev = nutscan_scan_eaton_serial_shut(port_name)) == NULL) {
2013-11-24 17:00:12 +02:00
usleep(100000);
/* Else, try XCP */
2022-07-10 10:23:45 +03:00
if ((dev = nutscan_scan_eaton_serial_xcp(port_name)) == NULL) {
2013-11-24 17:00:12 +02:00
/* Else, try Q1 */
usleep(100000);
dev = nutscan_scan_eaton_serial_q1(port_name);
}
/* Else try UTalk? */
}
return dev;
}
nutscan_device_t * nutscan_scan_eaton_serial(const char* ports_range)
{
2022-07-10 10:23:45 +03:00
bool_t pass = TRUE; /* Track that we may spawn a scanning thread */
2013-11-24 17:00:12 +02:00
struct sigaction oldact;
int change_action_handler = 0;
char *current_port_name = NULL;
char **serial_ports_list;
int current_port_nb;
#ifdef HAVE_PTHREAD
2022-07-10 10:23:45 +03:00
# ifdef HAVE_SEMAPHORE
sem_t * semaphore = nutscan_semaphore();
# endif
2013-11-24 17:00:12 +02:00
pthread_t thread;
2022-07-10 10:23:45 +03:00
nutscan_thread_t * thread_array = NULL;
size_t thread_count = 0, i;
2013-11-24 17:00:12 +02:00
2022-07-10 10:23:45 +03:00
pthread_mutex_init(&dev_mutex, NULL);
#endif /* HAVE_PTHREAD */
2013-11-24 17:00:12 +02:00
/* 1) Get ports_list */
serial_ports_list = nutscan_get_serial_ports_list(ports_range);
2022-07-10 10:23:45 +03:00
if (serial_ports_list == NULL) {
2013-11-24 17:00:12 +02:00
return NULL;
}
/* Ignore SIGPIPE if the caller hasn't set a handler for it yet */
2022-07-10 10:23:45 +03:00
if (sigaction(SIGPIPE, NULL, &oldact) == 0) {
#if (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_PUSH_POP) && (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES)
# pragma GCC diagnostic push
# pragma GCC diagnostic ignored "-Wstrict-prototypes"
#endif
if (oldact.sa_handler == SIG_DFL) {
2013-11-24 17:00:12 +02:00
change_action_handler = 1;
2022-07-10 10:23:45 +03:00
signal(SIGPIPE, SIG_IGN);
2013-11-24 17:00:12 +02:00
}
2022-07-10 10:23:45 +03:00
#if (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_PUSH_POP) && (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES)
# pragma GCC diagnostic pop
#endif
2013-11-24 17:00:12 +02:00
}
/* port(s) iterator */
current_port_nb = 0;
2022-07-10 10:23:45 +03:00
while (serial_ports_list[current_port_nb] != NULL) {
2013-11-24 17:00:12 +02:00
#ifdef HAVE_PTHREAD
2022-07-10 10:23:45 +03:00
/* NOTE: With many enough targets to scan, this can crash
* by spawning too many children; add a limit and loop to
* "reap" some already done with their work. And probably
* account them in thread_array[] as something to not wait
* for below in pthread_join()...
*/
# ifdef HAVE_SEMAPHORE
/* Just wait for someone to free a semaphored slot,
* if none are available, and then/otherwise grab one
*/
if (thread_array == NULL) {
/* Starting point, or after a wait to complete
* all earlier runners */
sem_wait(semaphore);
pass = TRUE;
} else {
pass = (sem_trywait(semaphore) == 0);
2013-11-24 17:00:12 +02:00
}
2022-07-10 10:23:45 +03:00
# else
# ifdef HAVE_PTHREAD_TRYJOIN
/* A somewhat naive and brute-force solution for
* systems without a semaphore.h. This may suffer
* some off-by-one errors, using a few more threads
* than intended (if we race a bit at the wrong time,
* probably up to one per enabled scanner routine).
*/
/* TOTHINK: Should there be a threadcount_mutex when
* we just read the value in if() and while() below?
* At worst we would overflow the limit a bit due to
* other protocol scanners...
*/
if (curr_threads >= max_threads) {
upsdebugx(2, "%s: already running %zu scanning threads "
"(launched overall: %zu), "
"waiting until some would finish",
__func__, curr_threads, thread_count);
while (curr_threads >= max_threads) {
for (i = 0; i < thread_count ; i++) {
int ret;
if (!thread_array[i].active) continue;
pthread_mutex_lock(&threadcount_mutex);
upsdebugx(3, "%s: Trying to join thread #%i...", __func__, i);
ret = pthread_tryjoin_np(thread_array[i].thread, NULL);
switch (ret) {
case ESRCH: /* No thread with the ID thread could be found - already "joined"? */
upsdebugx(5, "%s: Was thread #%zu joined earlier?", __func__, i);
break;
case 0: /* thread exited */
if (curr_threads > 0) {
curr_threads --;
upsdebugx(4, "%s: Joined a finished thread #%zu", __func__, i);
} else {
/* threadcount_mutex fault? */
upsdebugx(0, "WARNING: %s: Accounting of thread count "
"says we are already at 0", __func__);
}
thread_array[i].active = FALSE;
break;
case EBUSY: /* actively running */
upsdebugx(6, "%s: thread #%zu still busy (%i)",
__func__, i, ret);
break;
case EDEADLK: /* Errors with thread interactions... bail out? */
case EINVAL: /* Errors with thread interactions... bail out? */
default: /* new pthreads abilities? */
upsdebugx(5, "%s: thread #%zu reported code %i",
__func__, i, ret);
break;
}
pthread_mutex_unlock(&threadcount_mutex);
}
2013-11-24 17:00:12 +02:00
2022-07-10 10:23:45 +03:00
if (curr_threads >= max_threads) {
usleep (10000); /* microSec's, so 0.01s here */
}
}
upsdebugx(2, "%s: proceeding with scan", __func__);
}
/* NOTE: No change to default "pass" in this ifdef:
* if we got to this line, we have a slot to use */
# endif /* HAVE_PTHREAD_TRYJOIN */
# endif /* HAVE_SEMAPHORE */
#endif /* HAVE_PTHREAD */
if (pass) {
current_port_name = serial_ports_list[current_port_nb];
#ifdef HAVE_PTHREAD
if (pthread_create(&thread, NULL, nutscan_scan_eaton_serial_device, (void*)current_port_name) == 0) {
# ifdef HAVE_PTHREAD_TRYJOIN
pthread_mutex_lock(&threadcount_mutex);
curr_threads++;
# endif /* HAVE_PTHREAD_TRYJOIN */
thread_count++;
nutscan_thread_t *new_thread_array = realloc(thread_array,
thread_count * sizeof(nutscan_thread_t));
if (new_thread_array == NULL) {
upsdebugx(1, "%s: Failed to realloc thread array", __func__);
break;
}
else {
thread_array = new_thread_array;
}
thread_array[thread_count - 1].thread = thread;
thread_array[thread_count - 1].active = TRUE;
# ifdef HAVE_PTHREAD_TRYJOIN
pthread_mutex_unlock(&threadcount_mutex);
# endif /* HAVE_PTHREAD_TRYJOIN */
}
#else /* if not HAVE_PTHREAD */
nutscan_scan_eaton_serial_device(current_port_name);
#endif /* if HAVE_PTHREAD */
current_port_nb++;
} else { /* if not pass -- all slots busy */
2013-11-24 17:00:12 +02:00
#ifdef HAVE_PTHREAD
2022-07-10 10:23:45 +03:00
# ifdef HAVE_SEMAPHORE
/* Wait for all current scans to complete */
if (thread_array != NULL) {
upsdebugx (2, "%s: Running too many scanning threads, "
"waiting until older ones would finish",
__func__);
for (i = 0; i < thread_count ; i++) {
int ret;
if (!thread_array[i].active) {
/* Probably should not get here,
* but handle it just in case */
upsdebugx(0, "WARNING: %s: Midway clean-up: did not expect thread %zu to be not active",
__func__, i);
sem_post(semaphore);
continue;
}
thread_array[i].active = FALSE;
ret = pthread_join(thread_array[i].thread, NULL);
if (ret != 0) {
upsdebugx(0, "WARNING: %s: Midway clean-up: pthread_join() returned code %i",
__func__, ret);
}
sem_post(semaphore);
}
thread_count = 0;
free(thread_array);
thread_array = NULL;
}
# else
# ifdef HAVE_PTHREAD_TRYJOIN
/* TODO: Move the wait-loop for TRYJOIN here? */
# endif /* HAVE_PTHREAD_TRYJOIN */
# endif /* HAVE_SEMAPHORE */
#endif /* HAVE_PTHREAD */
} /* if: could we "pass" or not? */
} /* while */
#ifdef HAVE_PTHREAD
if (thread_array != NULL) {
upsdebugx(2, "%s: all planned scans launched, waiting for threads to complete", __func__);
for (i = 0; i < thread_count; i++) {
int ret;
if (!thread_array[i].active) continue;
ret = pthread_join(thread_array[i].thread, NULL);
if (ret != 0) {
upsdebugx(0, "WARNING: %s: Clean-up: pthread_join() returned code %i",
__func__, ret);
}
thread_array[i].active = FALSE;
# ifdef HAVE_SEMAPHORE
sem_post(semaphore);
# else
# ifdef HAVE_PTHREAD_TRYJOIN
pthread_mutex_lock(&threadcount_mutex);
if (curr_threads > 0) {
curr_threads --;
upsdebugx(5, "%s: Clean-up: Joined a finished thread #%zu",
__func__, i);
} else {
upsdebugx(0, "WARNING: %s: Clean-up: Accounting of thread count "
"says we are already at 0", __func__);
}
pthread_mutex_unlock(&threadcount_mutex);
# endif /* HAVE_PTHREAD_TRYJOIN */
# endif /* HAVE_SEMAPHORE */
}
free(thread_array);
upsdebugx(2, "%s: all threads freed", __func__);
2013-11-24 17:00:12 +02:00
}
pthread_mutex_destroy(&dev_mutex);
2022-07-10 10:23:45 +03:00
#endif /* HAVE_PTHREAD */
2013-11-24 17:00:12 +02:00
2022-07-10 10:23:45 +03:00
if (change_action_handler) {
#if (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_PUSH_POP) && (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES)
# pragma GCC diagnostic push
# pragma GCC diagnostic ignored "-Wstrict-prototypes"
#endif
signal(SIGPIPE, SIG_DFL);
#if (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_PUSH_POP) && (defined HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES)
# pragma GCC diagnostic pop
#endif
2013-11-24 17:00:12 +02:00
}
/* free everything... */
2022-07-10 10:23:45 +03:00
i = 0;
while (serial_ports_list[i] != NULL) {
2013-11-24 17:00:12 +02:00
free(serial_ports_list[i]);
i++;
}
free( serial_ports_list);
return nutscan_rewind_device(dev_ret);
}