nut-debian/drivers/oneac.c

1053 lines
28 KiB
C
Raw Normal View History

2010-03-26 01:20:59 +02:00
/*vim ts=4*/
2012-06-01 16:55:19 +03:00
/* oneac.c - Driver for Oneac UPS using the Advanced Interface.
*
* Supported Oneac UPS families in this driver:
* EG (late 80s, early 90s, plug-in serial interface card)
* ON (early and mid-90s, plug-in serial interface card)
* OZ (mid-90s on, DB-25 std., interface slot)
* OB (early 2000's on, big cabinet, DB-25 std., interface slot)
*
* Copyright (C)
* 2003 by Eric Lawson <elawson@inficad.com>
* 2012 by Bill Elliot <bill@wreassoc.com>
*
* This program was sponsored by MGE UPS SYSTEMS, and now Eaton
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* History:
* - 7 February 2012. Bill Elliot
* Enhancing the driver for additional capabilities and later units.
*
* - 28 November 2003. Eric Lawson
2022-07-10 10:23:45 +03:00
* More or less complete re-write for NUT 1.5.9
* This was somewhat easier than trying to beat the old driver code
2010-03-26 01:20:59 +02:00
* into submission
2022-07-10 10:23:45 +03:00
*
2012-06-01 16:55:19 +03:00
*/
2010-03-26 01:20:59 +02:00
#include "main.h"
#include "serial.h"
#include "oneac.h"
2012-06-01 16:55:19 +03:00
/* Prototypes to allow setting pointer before function is defined */
int setcmd(const char* varname, const char* setvalue);
int instcmd(const char *cmdname, const char *extra);
#define DRIVER_NAME "Oneac EG/ON/OZ/OB UPS driver"
2022-07-10 10:23:45 +03:00
#define DRIVER_VERSION "0.81"
2010-03-26 01:20:59 +02:00
/* driver description structure */
upsdrv_info_t upsdrv_info = {
DRIVER_NAME,
DRIVER_VERSION,
2012-06-01 16:55:19 +03:00
"Bill Elliot <bill@wreassoc.com>\n"
2010-03-26 01:20:59 +02:00
"Eric Lawson <elawson@inficad.com>",
2012-06-01 16:55:19 +03:00
DRV_STABLE,
2010-03-26 01:20:59 +02:00
{ NULL }
};
2012-06-01 16:55:19 +03:00
#define SECS 0 /* Serial function wait time*/
#define USEC 500000 /* Rest of serial function wait time*/
#define COMM_TRIES 3 /* Serial retries before "stale" */
static char UpsFamily [3];
/****************************************************************
* Below are functions used only in this oneac driver *
***************************************************************/
/* Since an installed network card may delay responses from the UPS
* allow for a repeat of the get request. Also confirm that
* the correct number of characters are returned.
*/
2022-07-10 10:23:45 +03:00
static ssize_t OneacGetResponse (char* chBuff, const size_t BuffSize, int ExpectedCount)
2012-06-01 16:55:19 +03:00
{
int Retries = 10; /* x/2 seconds max with 500000 USEC */
2022-07-10 10:23:45 +03:00
ssize_t return_val;
2012-06-01 16:55:19 +03:00
do
{
2022-07-10 10:23:45 +03:00
return_val = ser_get_line(upsfd,
chBuff, BuffSize, ENDCHAR, IGNCHARS, SECS, USEC);
2012-06-01 16:55:19 +03:00
if (return_val == ExpectedCount)
break;
2022-07-10 10:23:45 +03:00
upsdebugx (3,
"!OneacGetResponse retry (%zd, %d)...",
return_val, Retries);
2012-06-01 16:55:19 +03:00
} while (--Retries > 0);
upsdebugx (4,"OneacGetResponse buffer: %s",chBuff);
if (Retries == 0)
{
upsdebugx (2,"!!OneacGetResponse timeout...");
return_val = 1; /* Comms error */
}
else
{
if (Retries < 10)
upsdebugx (2,"OneacGetResponse recovered (%d)...", Retries);
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
return_val = 0; /* Good comms */
}
2022-07-10 10:23:45 +03:00
return return_val;
2012-06-01 16:55:19 +03:00
}
2010-03-26 01:20:59 +02:00
2022-07-10 10:23:45 +03:00
static void do_battery_test(void)
2010-03-26 01:20:59 +02:00
{
2012-06-01 16:55:19 +03:00
char buffer[32];
2010-03-26 01:20:59 +02:00
if (getval("testtime") == NULL)
snprintf(buffer, 3, "%s", DEFAULT_BAT_TEST_TIME);
else {
snprintf(buffer, 3, "%s", getval("testtime"));
/*the UPS wants this value to always be two characters long*/
/*so put a zero in front of the string, if needed.... */
if (strlen(buffer) < 2) {
buffer[2] = '\0';
buffer[1] = buffer[0];
buffer[0] = '0';
}
}
ser_send(upsfd,"%s%s%s",BAT_TEST_PREFIX,buffer,COMMAND_END);
}
2022-07-10 10:23:45 +03:00
static int SetOutputAllow(const char* lowval, const char* highval)
2012-06-01 16:55:19 +03:00
{
char buffer[32];
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
snprintf(buffer, 4, "%.3s", lowval);
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
/*the UPS wants this value to always be three characters long*/
/*so put a zero in front of the string, if needed.... */
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
if (strlen(buffer) < 3)
{
buffer[3] = '\0';
buffer[2] = buffer[1];
buffer[1] = buffer[0];
buffer[0] = '0';
2010-03-26 01:20:59 +02:00
}
2022-07-10 10:23:45 +03:00
upsdebugx (2,"SetOutputAllow sending %s%.3s,%.3s...",
2012-06-01 16:55:19 +03:00
SETX_OUT_ALLOW, buffer, highval);
2022-07-10 10:23:45 +03:00
ser_send(upsfd,"%s%.3s,%.3s%s", SETX_OUT_ALLOW, buffer, highval,
2012-06-01 16:55:19 +03:00
COMMAND_END);
ser_get_line(upsfd,buffer,sizeof(buffer), ENDCHAR, IGNCHARS,SECS,USEC);
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
if(buffer[0] == DONT_UNDERSTAND)
{
upsdebugx (2,"SetOutputAllow got asterisk back...");
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
return 1; /* Invalid command */
2010-03-26 01:20:59 +02:00
}
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
return 0; /* Valid command */
}
2010-03-26 01:20:59 +02:00
2022-07-10 10:23:45 +03:00
static void EliminateLeadingZeroes (const char* buff1, int StringSize, char* buff2,
const size_t buff2size)
2012-06-01 16:55:19 +03:00
{
int i = 0;
int j = 0;
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
memset(buff2, '\0', buff2size); /* Fill with nulls */
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
/* Find first non-'0' */
2022-07-10 10:23:45 +03:00
while ((i < (StringSize - 1) && (buff1[i] == '0')))
2012-06-01 16:55:19 +03:00
{
i++;
}
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
while (i < StringSize) /* Move rest of string */
{
buff2[j++] = buff1[i++];
}
2010-03-26 01:20:59 +02:00
}
2012-06-01 16:55:19 +03:00
/****************************************************************
* Below are the commands that are called by main *
***************************************************************/
void upsdrv_initups(void)
{
upsfd = ser_open(device_path);
ser_set_speed(upsfd, device_path, B9600);
/*get the UPS in the right frame of mind*/
ser_send_pace(upsfd, 100, "%s", COMMAND_END);
ser_send_pace(upsfd, 100, "%s", COMMAND_END);
sleep (1);
}
2010-03-26 01:20:59 +02:00
void upsdrv_initinfo(void)
{
2012-06-01 16:55:19 +03:00
int i,j, k;
int VRange=0;
int timevalue;
2022-07-10 10:23:45 +03:00
ssize_t RetValue;
2010-03-26 01:20:59 +02:00
char buffer[256], buffer2[32];
2012-06-01 16:55:19 +03:00
/* All families should reply to this request so we can confirm that it is
* an ONEAC UPS
*/
2010-03-26 01:20:59 +02:00
ser_flush_in(upsfd,"",0);
2012-06-01 16:55:19 +03:00
ser_send(upsfd,"%c%s",GET_FAMILY,COMMAND_END);
if(OneacGetResponse (buffer, sizeof(buffer), 2))
{
fatalx(EXIT_FAILURE, "Serial timeout with ONEAC UPS on %s\n",
device_path);
}
else
{
2022-07-10 10:23:45 +03:00
if (strncmp(buffer,FAMILY_ON,FAMILY_SIZE) != 0 &&
2012-06-01 16:55:19 +03:00
strncmp(buffer,FAMILY_OZ,FAMILY_SIZE) != 0 &&
2022-07-10 10:23:45 +03:00
strncmp(buffer,FAMILY_OB,FAMILY_SIZE) != 0 &&
2012-06-01 16:55:19 +03:00
strncmp(buffer,FAMILY_EG,FAMILY_SIZE) != 0)
{
fatalx(EXIT_FAILURE, "Did not find an ONEAC UPS on %s\n",
2022-07-10 10:23:45 +03:00
device_path);
2012-06-01 16:55:19 +03:00
}
}
/* UPS Model (either EG, ON, OZ or OB series of UPS) */
strncpy(UpsFamily, buffer, FAMILY_SIZE);
UpsFamily[2] = '\0';
dstate_setinfo("device.model", "%s",UpsFamily);
printf("Found %s family of Oneac UPS\n", UpsFamily);
dstate_setinfo("ups.type", "%s", "Line Interactive");
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
dstate_addcmd("test.battery.start.quick");
2010-03-26 01:20:59 +02:00
dstate_addcmd("test.battery.stop");
dstate_addcmd("test.failure.start");
2012-06-01 16:55:19 +03:00
dstate_addcmd("shutdown.return");
dstate_addcmd("shutdown.stop");
dstate_addcmd("shutdown.reboot");
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
upsh.setvar = setcmd;
2010-03-26 01:20:59 +02:00
upsh.instcmd = instcmd;
2012-06-01 16:55:19 +03:00
/* set some stuff that shouldn't change after initialization */
/* this stuff is common to all families of UPS */
ser_send(upsfd,"%c%s",GET_ALL,COMMAND_END);
if (strncmp(UpsFamily, FAMILY_EG, FAMILY_SIZE) == 0)
{
2022-07-10 10:23:45 +03:00
RetValue = OneacGetResponse (buffer, sizeof(buffer),
2012-06-01 16:55:19 +03:00
GETALL_EG_RESP_SIZE);
}
else
{
RetValue = OneacGetResponse (buffer, sizeof(buffer), GETALL_RESP_SIZE);
}
if(RetValue)
{
fatalx(EXIT_FAILURE, "Serial timeout(2) with ONEAC UPS on %s\n",
device_path);
}
/* Manufacturer */
dstate_setinfo("device.mfr", "%.5s", buffer);
2010-03-26 01:20:59 +02:00
/*firmware revision*/
2012-06-01 16:55:19 +03:00
dstate_setinfo("ups.firmware", "%.3s",buffer+7);
2010-03-26 01:20:59 +02:00
/*nominal AC frequency setting --either 50 or 60*/
2012-06-01 16:55:19 +03:00
dstate_setinfo("input.frequency.nominal", "%.2s", buffer+20);
dstate_setinfo("output.frequency.nominal", "%.2s", buffer+20);
/* Shutdown delay in seconds...can be changed by user */
if (getval("offdelay") == NULL)
dstate_setinfo("ups.delay.shutdown", "0");
else
dstate_setinfo("ups.delay.shutdown", "%s", getval("offdelay"));
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
dstate_setflags("ups.delay.shutdown", ST_FLAG_STRING | ST_FLAG_RW);
dstate_setaux("ups.delay.shutdown", GET_SHUTDOWN_RESP_SIZE);
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
/* Setup some ON/OZ/OB only stuff ... i.e. not EG */
if (strncmp(UpsFamily, FAMILY_EG, FAMILY_SIZE) != 0)
{
dstate_addcmd("reset.input.minmax");
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
/*nominal input voltage*/
VRange = buffer[26]; /* Keep for later use also */
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
switch (VRange) /* Will be '1' or '2' */
{
case V120AC:
dstate_setinfo("input.voltage.nominal", "120");
dstate_setinfo("output.voltage.nominal", "120");
break;
case V230AC:
dstate_setinfo("input.voltage.nominal", "230");
dstate_setinfo("output.voltage.nominal", "230");
break;
default:
upslogx(LOG_INFO,"Oneac: "
"Invalid nom voltage parameter from UPS [%c]", VRange);
}
}
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
/* Setup some OZ/OB only stuff */
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
if ((strncmp (UpsFamily, FAMILY_OZ, FAMILY_SIZE) == 0) ||
(strncmp (UpsFamily, FAMILY_OB, FAMILY_SIZE) == 0))
{
dstate_addcmd("test.panel.start");
dstate_addcmd("test.battery.start.deep");
dstate_addcmd("beeper.enable");
dstate_addcmd("beeper.disable");
dstate_addcmd("beeper.mute");
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
dstate_setaux("ups.delay.shutdown", GETX_SHUTDOWN_RESP_SIZE);
2010-03-26 01:20:59 +02:00
ser_flush_in(upsfd,"",0);
2012-06-01 16:55:19 +03:00
ser_send(upsfd,"%c%s",GETX_ALL_2,COMMAND_END);
if(OneacGetResponse (buffer, sizeof(buffer), GETX_ALL2_RESP_SIZE))
{
fatalx(EXIT_FAILURE, "Serial timeout(3) with ONEAC UPS on %s\n",
device_path);
}
/* Low and high output trip points */
EliminateLeadingZeroes (buffer+73, 3, buffer2, sizeof(buffer2));
dstate_setinfo("input.transfer.low", "%s", buffer2);
dstate_setflags("input.transfer.low", ST_FLAG_STRING | ST_FLAG_RW );
dstate_setaux("input.transfer.low", 3);
EliminateLeadingZeroes (buffer+76, 3, buffer2, sizeof(buffer2));
dstate_setinfo("input.transfer.high", "%s", buffer2);
dstate_setflags("input.transfer.high", ST_FLAG_STRING | ST_FLAG_RW);
dstate_setaux("input.transfer.high", 3);
/* Restart delay */
EliminateLeadingZeroes (buffer+84, 4, buffer2, sizeof(buffer2));
dstate_setinfo("ups.delay.start", "%s", buffer2);
dstate_setflags("ups.delay.start", ST_FLAG_STRING | ST_FLAG_RW);
dstate_setaux("ups.delay.start", 4);
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
/* Low Batt at time */
strncpy(buffer2, buffer+82, 2);
buffer2[2]='\0';
timevalue = atoi(buffer2) * 60; /* Change minutes to seconds */
dstate_setinfo("battery.runtime.low", "%d",timevalue);
dstate_setflags("battery.runtime.low", ST_FLAG_STRING | ST_FLAG_RW);
dstate_setaux("battery.runtime.low", 2);
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
/*Get the actual model string for ON UPS reported as OZ/OB family*/
2010-03-26 01:20:59 +02:00
/*UPS Model (full string)*/
memset(buffer2, '\0', 32);
2022-07-10 10:23:45 +03:00
#ifdef HAVE_PRAGMAS_FOR_GCC_DIAGNOSTIC_IGNORED_FORMAT_TRUNCATION
#pragma GCC diagnostic push
#endif
#ifdef HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_FORMAT_TRUNCATION
#pragma GCC diagnostic ignored "-Wformat-truncation"
#endif
#ifdef HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRINGOP_TRUNCATION
#pragma GCC diagnostic ignored "-Wstringop-truncation"
#endif
strncpy(buffer2, buffer + 5, 10);
#ifdef HAVE_PRAGMAS_FOR_GCC_DIAGNOSTIC_IGNORED_FORMAT_TRUNCATION
#pragma GCC diagnostic pop
#endif
for (i = 9; i >= 0 && buffer2[i] == ' '; --i)
2012-06-01 16:55:19 +03:00
{
2010-03-26 01:20:59 +02:00
buffer2[i] = '\0';
}
2012-06-01 16:55:19 +03:00
dstate_setinfo("device.model", "%s", buffer2);
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
/* Serial number */
dstate_setinfo("device.serial", "%.4s-%.4s", buffer+18, buffer+22);
2022-07-10 10:23:45 +03:00
printf("Found %.10s UPS with serial number %.4s-%.4s\n",
2012-06-01 16:55:19 +03:00
buffer2, buffer+18, buffer+22);
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
/* Manufacture Date */
dstate_setinfo("ups.mfr.date", "%.6s (yymmdd)", buffer+38);
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
/* Battery Replace Date */
dstate_setinfo("battery.date", "%.6s (yymmdd)", buffer+44);
dstate_setflags("battery.date", ST_FLAG_STRING | ST_FLAG_RW);
dstate_setaux("battery.date", 6);
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
/* Real power nominal */
EliminateLeadingZeroes (buffer+55, 5, buffer2, sizeof(buffer2));
dstate_setinfo("ups.realpower.nominal", "%s", buffer2);
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
/* Set up ups.start.auto to be writable */
dstate_setinfo("ups.start.auto", "yes");
dstate_setflags("ups.start.auto", ST_FLAG_STRING | ST_FLAG_RW);
dstate_setaux("ups.start.auto", 3);
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
/* Get output window min/max points from OB or OZ v1.9 or later */
if ((strncmp (UpsFamily, FAMILY_OB, FAMILY_SIZE) == 0) ||
(strcmp (dstate_getinfo("ups.firmware"), MIN_ALLOW_FW) >= 0 ))
{
2022-07-10 10:23:45 +03:00
upsdebugx (2,"Can get output window min/max! (%s)",
2012-06-01 16:55:19 +03:00
dstate_getinfo("ups.firmware"));
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
ser_send(upsfd,"%s%s",GETX_ALLOW_RANGE,COMMAND_END);
if(OneacGetResponse (buffer, sizeof(buffer), GETX_RANGE_RESP_SIZE))
{
2022-07-10 10:23:45 +03:00
fatalx(EXIT_FAILURE,
2012-06-01 16:55:19 +03:00
"Serial timeout(4) with ONEAC UPS on %s\n",device_path);
}
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
strncpy(buffer2, buffer, 3);
buffer2[3]='\0';
i = atoi(buffer2); /* Minimum voltage */
2022-07-10 10:23:45 +03:00
#ifdef HAVE_PRAGMAS_FOR_GCC_DIAGNOSTIC_IGNORED_FORMAT_TRUNCATION
#pragma GCC diagnostic push
#endif
#ifdef HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_FORMAT_TRUNCATION
#pragma GCC diagnostic ignored "-Wformat-truncation"
#endif
#ifdef HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRINGOP_TRUNCATION
#pragma GCC diagnostic ignored "-Wstringop-truncation"
#endif
strncpy(buffer2, buffer + 4, 3);
#ifdef HAVE_PRAGMAS_FOR_GCC_DIAGNOSTIC_IGNORED_FORMAT_TRUNCATION
#pragma GCC diagnostic pop
#endif
2012-06-01 16:55:19 +03:00
j = atoi(buffer2); /* Maximum voltage */
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
strncpy(buffer2, buffer+8, 2);
buffer2[2]='\0';
k = atoi(buffer2); /* Spread between */
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
dstate_setinfo("input.transfer.low.min", "%3d", i);
dstate_setinfo("input.transfer.low.max", "%3d", j-k);
dstate_setinfo("input.transfer.high.min", "%3d", i+k);
dstate_setinfo("input.transfer.high.max", "%3d", j);
}
else
{
/* Use default values from firmware */
2022-07-10 10:23:45 +03:00
upsdebugx (2,"Using trip defaults (%s)...",
2012-06-01 16:55:19 +03:00
dstate_getinfo("ups.firmware"));
switch (VRange) /* Held from initial use */
{
case V120AC:
dstate_setinfo("input.transfer.low.min", "90");
dstate_setinfo("input.transfer.low.max", "120");
dstate_setinfo("input.transfer.high.min", "110");
dstate_setinfo("input.transfer.high.max", "140");
break;
case V230AC:
dstate_setinfo("input.transfer.low.min", "172");
dstate_setinfo("input.transfer.low.max", "228");
dstate_setinfo("input.transfer.high.min", "212");
dstate_setinfo("input.transfer.high.max", "268");
break;
default:
;
}
2010-03-26 01:20:59 +02:00
}
}
}
void upsdrv_updateinfo(void)
{
2012-06-01 16:55:19 +03:00
static int CommTry = COMM_TRIES; /* Comm loss counter */
char buffer[256]; /* Main response buffer */
char buffer2[32]; /* Conversion buffer */
char s;
2022-07-10 10:23:45 +03:00
ssize_t RetValue;
2012-06-01 16:55:19 +03:00
int timevalue;
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
/* Start with EG/ON information */
2010-03-26 01:20:59 +02:00
ser_flush_in(upsfd,"",0); /*just in case*/
2012-06-01 16:55:19 +03:00
ser_send (upsfd,"%c%s", GET_ALL, COMMAND_END);
if (strncmp(UpsFamily, FAMILY_EG, FAMILY_SIZE) == 0)
{
RetValue = OneacGetResponse (buffer,sizeof(buffer),GETALL_EG_RESP_SIZE);
}
else
{
RetValue = OneacGetResponse (buffer, sizeof(buffer), GETALL_RESP_SIZE);
}
if ((RetValue != 0) && (CommTry == 0))
2010-03-26 01:20:59 +02:00
{
2012-06-01 16:55:19 +03:00
ser_comm_fail("Oneac UPS Comm failure continues on port %s",
device_path);
2022-07-10 10:23:45 +03:00
}
2012-06-01 16:55:19 +03:00
else if (RetValue != 0)
{
if (--CommTry == 0)
{
ser_comm_fail("Oneac UPS Comm failure on port %s",device_path);
dstate_datastale();
}
upsdebugx(2,"Oneac: Update serial comm retry value: %d", CommTry);
return;
2010-03-26 01:20:59 +02:00
}
else
{
2012-06-01 16:55:19 +03:00
CommTry = COMM_TRIES; /* Reset serial retries */
s = buffer[12];
2010-03-26 01:20:59 +02:00
status_init();
2012-06-01 16:55:19 +03:00
alarm_init();
2010-03-26 01:20:59 +02:00
/*take care of the UPS status information*/
2012-06-01 16:55:19 +03:00
if (s == '@')
{
status_set("OL");
}
else
{
if (s & 0x01) /* On Battery */
{
2010-03-26 01:20:59 +02:00
status_set("OB");
2012-06-01 16:55:19 +03:00
}
else
{
status_set("OL");
}
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
if (s & 0x02) /* Low Battery */
status_set("LB");
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
if (s & 0x04) /* General fault */
{
2010-03-26 01:20:59 +02:00
dstate_setinfo("ups.test.result","UPS Internal Failure");
2012-06-01 16:55:19 +03:00
}
else
{
dstate_setinfo("ups.test.result","Normal");
}
if (s & 0x08) /* Replace Battery */
2010-03-26 01:20:59 +02:00
status_set("RB");
2012-06-01 16:55:19 +03:00
/* if (s & 0x10) */ /* High Line */
if (s & 0x20) /* Unit is hot */
alarm_set("OVERHEAT");
2010-03-26 01:20:59 +02:00
}
2012-06-01 16:55:19 +03:00
/*take care of the reason why the UPS last transferred to battery*/
2010-03-26 01:20:59 +02:00
switch (buffer[13]) {
case XFER_BLACKOUT :
dstate_setinfo("input.transfer.reason", "Blackout");
break;
case XFER_LOW_VOLT :
dstate_setinfo("input.transfer.reason",
"Low Input Voltage");
break;
case XFER_HI_VOLT :
dstate_setinfo("input.transfer.reason",
"High Input Voltage");
break;
case NO_VALUE_YET :
2022-07-10 10:23:45 +03:00
dstate_setinfo("input.transfer.reason",
2010-03-26 01:20:59 +02:00
"No transfer yet.");
break;
default :
upslogx(LOG_INFO,"Oneac: Unknown reason for UPS battery"
2012-06-01 16:55:19 +03:00
" transfer [%c]", buffer[13]);
2010-03-26 01:20:59 +02:00
}
2012-06-01 16:55:19 +03:00
/* now update info for only the non-EG families of UPS*/
if (strncmp(UpsFamily, FAMILY_EG, FAMILY_SIZE) != 0)
{
2010-03-26 01:20:59 +02:00
dstate_setinfo("ups.load", "0%.2s",buffer+31);
2012-06-01 16:55:19 +03:00
/* Output ON or OFF? */
if(buffer[27] == NO_VALUE_YET)
status_set("OFF");
2010-03-26 01:20:59 +02:00
/*battery charge*/
if(buffer[10] == YES)
dstate_setinfo("battery.charge", "0%.2s",buffer+33);
2022-07-10 10:23:45 +03:00
else
2012-06-01 16:55:19 +03:00
dstate_setinfo("battery.charge", "100");
EliminateLeadingZeroes (buffer+35, 3, buffer2, sizeof(buffer2));
dstate_setinfo("input.voltage", "%s",buffer2);
EliminateLeadingZeroes (buffer+38, 3, buffer2, sizeof(buffer2));
dstate_setinfo("input.voltage.minimum", "%s",buffer2);
EliminateLeadingZeroes (buffer+41, 3, buffer2, sizeof(buffer2));
dstate_setinfo("input.voltage.maximum", "%s",buffer2);
EliminateLeadingZeroes (buffer+44, 3, buffer2, sizeof(buffer2));
dstate_setinfo("output.voltage", "%s",buffer2);
if (buffer[15] == NO_VALUE_YET)
{
dstate_delinfo("ups.timer.shutdown");
}
else
{
/* A shutdown is underway! */
status_set("FSD");
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
if(buffer[15] != HIGH_COUNT)
{
2022-07-10 10:23:45 +03:00
EliminateLeadingZeroes (buffer+15, 3, buffer2,
2012-06-01 16:55:19 +03:00
sizeof(buffer2));
dstate_setinfo("ups.timer.shutdown", "%s", buffer2);
}
else
{
dstate_setinfo("ups.timer.shutdown", "999");
}
}
2022-07-10 10:23:45 +03:00
if (buffer[47] == YES)
2012-06-01 16:55:19 +03:00
status_set("BOOST");
}
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
/* Now update info for only the OZ/OB families of UPS */
if ((strncmp(UpsFamily, FAMILY_OZ, FAMILY_SIZE) == 0) ||
2022-07-10 10:23:45 +03:00
(strncmp(UpsFamily, FAMILY_OB, FAMILY_SIZE) == 0))
2012-06-01 16:55:19 +03:00
{
ser_flush_in(upsfd,"",0); /*just in case*/
ser_send (upsfd,"%c%s",GETX_ALL_1,COMMAND_END);
2022-07-10 10:23:45 +03:00
RetValue = OneacGetResponse (buffer, sizeof(buffer),
2012-06-01 16:55:19 +03:00
GETX_ALL1_RESP_SIZE);
if(RetValue)
{
if (--CommTry == 0)
{
ser_comm_fail("Oneac (OZ) UPS Comm failure on port %s",
device_path);
dstate_datastale();
}
upsdebugx(2,"Oneac: "
"Update (OZ) serial comm retry value: %d", CommTry);
}
else
{
CommTry = COMM_TRIES; /* Reset count */
EliminateLeadingZeroes (buffer+57, 5, buffer2, sizeof(buffer2));
dstate_setinfo("ups.realpower", "%s",buffer2);
dstate_setinfo("input.frequency", "%.2s.%c",
buffer+42,buffer[44]);
dstate_setinfo("output.frequency", "%.2s.%c",
buffer+76, buffer[78]);
EliminateLeadingZeroes (buffer+29, 3, buffer2, sizeof(buffer2));
dstate_setinfo("battery.voltage", "%s.%c",buffer2, buffer[32]);
dstate_setinfo("ups.temperature", "%.2s",buffer+13);
dstate_setinfo("ups.load", "%.3s",buffer+73);
strncpy(buffer2, buffer+19, 4);
buffer2[4]='\0';
timevalue = atoi(buffer2) * 60; /* Change mins to secs */
dstate_setinfo("battery.runtime", "%d",timevalue);
/* Now some individual requests... */
/* Battery replace date */
ser_send (upsfd,"%c%s",GETX_BATT_REPLACED,COMMAND_END);
2022-07-10 10:23:45 +03:00
if(!OneacGetResponse (buffer, sizeof(buffer),
2012-06-01 16:55:19 +03:00
GETX_DATE_RESP_SIZE))
dstate_setinfo("battery.date", "%.6s (yymmdd)", buffer);
/* Low and high output trip points */
ser_send (upsfd,"%c%s",GETX_LOW_OUT_ALLOW,COMMAND_END);
2022-07-10 10:23:45 +03:00
if(!OneacGetResponse (buffer, sizeof(buffer),
2012-06-01 16:55:19 +03:00
GETX_ALLOW_RESP_SIZE))
{
EliminateLeadingZeroes (buffer, 3, buffer2,sizeof(buffer2));
dstate_setinfo("input.transfer.low", "%s", buffer2);
}
ser_send (upsfd,"%c%s",GETX_HI_OUT_ALLOW,COMMAND_END);
2022-07-10 10:23:45 +03:00
if(!OneacGetResponse (buffer, sizeof(buffer),
2012-06-01 16:55:19 +03:00
GETX_ALLOW_RESP_SIZE))
dstate_setinfo("input.transfer.high", "%s", buffer);
/* Restart delay */
ser_send (upsfd,"%c%s",GETX_RESTART_DLY,COMMAND_END);
2022-07-10 10:23:45 +03:00
if(!OneacGetResponse (buffer, sizeof(buffer),
2012-06-01 16:55:19 +03:00
GETX_RSTRT_RESP_SIZE))
{
2022-07-10 10:23:45 +03:00
EliminateLeadingZeroes (buffer, 4, buffer2,
2012-06-01 16:55:19 +03:00
sizeof(buffer2));
dstate_setinfo("ups.delay.start", "%s", buffer2);
}
/* Buzzer state */
ser_send (upsfd,"%s%s",GETX_BUZZER_WHAT,COMMAND_END);
if(!OneacGetResponse (buffer, sizeof(buffer), 1))
{
2022-07-10 10:23:45 +03:00
switch (buffer[0])
2012-06-01 16:55:19 +03:00
{
case BUZZER_ENABLED :
dstate_setinfo("ups.beeper.status", "enabled");
break;
case BUZZER_DISABLED :
dstate_setinfo("ups.beeper.status", "disabled");
break;
case BUZZER_MUTED :
dstate_setinfo("ups.beeper.status", "muted");
break;
default :
dstate_setinfo("ups.beeper.status", "enabled");
}
}
/* Auto start setting */
ser_send (upsfd,"%s%s",GETX_AUTO_START,COMMAND_END);
if(!OneacGetResponse (buffer, sizeof(buffer), 1))
{
if (buffer[0] == '0')
dstate_setinfo("ups.start.auto", "yes");
else
dstate_setinfo("ups.start.auto", "no");
}
/* Low Batt at time */
ser_send (upsfd,"%c%s",GETX_LOW_BATT_TIME,COMMAND_END);
if(!OneacGetResponse (buffer, sizeof(buffer), 2))
{
strncpy(buffer2, buffer, 2);
buffer2[2]='\0';
timevalue = atoi(buffer2) * 60; /* Mins to secs */
dstate_setinfo("battery.runtime.low", "%d",timevalue);
}
/* Shutdown timer */
ser_send (upsfd,"%c%s",GETX_SHUTDOWN,COMMAND_END);
2022-07-10 10:23:45 +03:00
if(!OneacGetResponse (buffer, sizeof(buffer),
2012-06-01 16:55:19 +03:00
GETX_SHUTDOWN_RESP_SIZE))
{
2022-07-10 10:23:45 +03:00
/* ON would have handled NO_VALUE_YET and setting FSD
2012-06-01 16:55:19 +03:00
* above so only deal with counter value here.
*/
if (buffer[0] != NO_VALUE_YET)
{
2022-07-10 10:23:45 +03:00
EliminateLeadingZeroes (buffer, 5, buffer2,
2012-06-01 16:55:19 +03:00
sizeof(buffer2));
dstate_setinfo("ups.timer.shutdown", "%s", buffer2);
}
}
/* Restart timer */
ser_send (upsfd,"%s%s",GETX_RESTART_COUNT,COMMAND_END);
2022-07-10 10:23:45 +03:00
if(!OneacGetResponse (buffer, sizeof(buffer),
2012-06-01 16:55:19 +03:00
GETX_RSTRT_RESP_SIZE))
{
if (atoi(buffer) == 0)
{
dstate_delinfo("ups.timer.start");
}
else
{
2022-07-10 10:23:45 +03:00
EliminateLeadingZeroes (buffer, 4, buffer2,
2012-06-01 16:55:19 +03:00
sizeof(buffer2));
dstate_setinfo("ups.timer.start", "%s", buffer2);
}
}
}
2010-03-26 01:20:59 +02:00
}
2012-06-01 16:55:19 +03:00
alarm_commit();
2010-03-26 01:20:59 +02:00
status_commit();
2012-06-01 16:55:19 +03:00
/* If the comm retry counter is zero then datastale has been set.
* We don't want to set dataok or ser_comm_good if that is the case.
*/
if (CommTry != 0)
{
dstate_dataok();
ser_comm_good();
}
2010-03-26 01:20:59 +02:00
}
}
2012-06-01 16:55:19 +03:00
2010-03-26 01:20:59 +02:00
void upsdrv_shutdown(void)
{
ser_send(upsfd,"%s",SHUTDOWN);
}
void upsdrv_help(void)
{
printf("\n---------\nNOTE:\n");
2012-06-01 16:55:19 +03:00
printf("You must set the UPS interface card DIP switch to 9600 BPS\n");
}
void upsdrv_cleanup(void)
{
ser_close(upsfd, device_path);
2010-03-26 01:20:59 +02:00
}
void upsdrv_makevartable(void)
{
addvar(VAR_VALUE,"testtime",
2012-06-01 16:55:19 +03:00
"Change battery test time from the 2 minute default.");
addvar(VAR_VALUE,"offdelay",
"Change shutdown delay time from 0 second default.");
2010-03-26 01:20:59 +02:00
}
2012-06-01 16:55:19 +03:00
int instcmd(const char *cmdname, const char *extra)
2010-03-26 01:20:59 +02:00
{
2012-06-01 16:55:19 +03:00
int i;
upsdebugx(2, "In instcmd with %s and extra %s.", cmdname, extra);
2010-03-26 01:20:59 +02:00
2012-06-01 16:55:19 +03:00
if (!strcasecmp(cmdname, "test.failure.start")) {
ser_send(upsfd,"%s%s",SIM_PWR_FAIL,COMMAND_END);
return STAT_INSTCMD_HANDLED;
}
if (!strcasecmp(cmdname, "shutdown.return")) {
i = atoi(dstate_getinfo("ups.delay.shutdown"));
if ((strncmp (UpsFamily, FAMILY_OZ, FAMILY_SIZE) == 0) ||
(strncmp (UpsFamily, FAMILY_OB, FAMILY_SIZE) == 0))
{
upsdebugx(3, "Shutdown using %c%d...", DELAYED_SHUTDOWN_PREFIX, i);
ser_send(upsfd,"%c%d%s",DELAYED_SHUTDOWN_PREFIX, i, COMMAND_END);
}
else
{
upsdebugx(3, "Shutdown using %c%03d...",DELAYED_SHUTDOWN_PREFIX, i);
ser_send(upsfd,"%c%03d%s",DELAYED_SHUTDOWN_PREFIX, i, COMMAND_END);
}
return STAT_INSTCMD_HANDLED;
}
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
if(!strcasecmp(cmdname, "shutdown.reboot")) {
ser_send(upsfd, "%s", SHUTDOWN);
return STAT_INSTCMD_HANDLED;
}
if (!strcasecmp(cmdname, "shutdown.stop")) {
ser_send(upsfd,"%c%s",DELAYED_SHUTDOWN_PREFIX,COMMAND_END);
return STAT_INSTCMD_HANDLED;
}
if (!strcasecmp(cmdname, "test.battery.start.quick")) {
do_battery_test();
return STAT_INSTCMD_HANDLED;
}
if (!strcasecmp(cmdname, "test.battery.start.deep")) {
ser_send(upsfd, "%s%s", TEST_BATT_DEEP, COMMAND_END);
return STAT_INSTCMD_HANDLED;
}
2022-07-10 10:23:45 +03:00
if (!strcasecmp(cmdname, "test.battery.stop"))
2012-06-01 16:55:19 +03:00
{
if ((strncmp (UpsFamily, FAMILY_EG, FAMILY_SIZE) == 0) ||
(strncmp (UpsFamily, FAMILY_ON, FAMILY_SIZE) == 0))
{
ser_send(upsfd,"%s00%s",BAT_TEST_PREFIX,COMMAND_END);
}
else
{
ser_send(upsfd,"%c%s",TEST_ABORT,COMMAND_END);
2022-07-10 10:23:45 +03:00
}
2012-06-01 16:55:19 +03:00
return STAT_INSTCMD_HANDLED;
}
if (!strcasecmp(cmdname, "reset.input.minmax")) {
ser_send(upsfd,"%c%s",RESET_MIN_MAX, COMMAND_END);
return STAT_INSTCMD_HANDLED;
}
if (!strcasecmp(cmdname, "beeper.enable")) {
ser_send(upsfd,"%c%c%s",SETX_BUZZER_PREFIX, BUZZER_ENABLED,COMMAND_END);
return STAT_INSTCMD_HANDLED;
}
if (!strcasecmp(cmdname, "beeper.disable")) {
ser_send(upsfd,"%c%c%s",SETX_BUZZER_PREFIX,BUZZER_DISABLED,COMMAND_END);
return STAT_INSTCMD_HANDLED;
}
if (!strcasecmp(cmdname, "beeper.mute")) {
ser_send(upsfd,"%c%c%s",SETX_BUZZER_PREFIX, BUZZER_MUTED, COMMAND_END);
return STAT_INSTCMD_HANDLED;
}
if (!strcasecmp(cmdname, "test.panel.start")) {
ser_send(upsfd,"%s%s",TEST_INDICATORS, COMMAND_END);
return STAT_INSTCMD_HANDLED;
}
upslogx(LOG_NOTICE, "instcmd: unknown command [%s]", cmdname);
return STAT_INSTCMD_UNKNOWN;
2010-03-26 01:20:59 +02:00
}
2012-06-01 16:55:19 +03:00
int setcmd(const char* varname, const char* setvalue)
2010-03-26 01:20:59 +02:00
{
2012-06-01 16:55:19 +03:00
upsdebugx(2, "In setcmd for %s with %s...", varname, setvalue);
if (!strcasecmp(varname, "ups.delay.shutdown"))
{
if ((strncmp (UpsFamily, FAMILY_OZ, FAMILY_SIZE) == 0) ||
(strncmp (UpsFamily, FAMILY_OB, FAMILY_SIZE) == 0))
{
if (atoi(setvalue) > 65535)
{
upsdebugx(2, "Too big for OZ/OB (>65535)...(%s)", setvalue);
return STAT_SET_UNKNOWN;
}
}
else
{
if (atoi(setvalue) > 999)
{
upsdebugx(2, "Too big for EG/ON (>999)...(%s)", setvalue);
return STAT_SET_UNKNOWN;
}
}
dstate_setinfo("ups.delay.shutdown", "%s", setvalue);
return STAT_SET_HANDLED;
}
if (!strcasecmp(varname, "input.transfer.low"))
{
if (SetOutputAllow(setvalue, dstate_getinfo("input.transfer.high")))
{
return STAT_SET_UNKNOWN;
}
else
{
dstate_setinfo("input.transfer.low" , "%s", setvalue);
return STAT_SET_HANDLED;
}
}
if (!strcasecmp(varname, "input.transfer.high"))
{
if (SetOutputAllow(dstate_getinfo("input.transfer.low"), setvalue))
{
return STAT_SET_UNKNOWN;
}
else
{
dstate_setinfo("input.transfer.high" , "%s", setvalue);
return STAT_SET_HANDLED;
}
}
if (!strcasecmp(varname, "battery.date"))
{
if(strlen(setvalue) == GETX_DATE_RESP_SIZE) /* yymmdd (6 chars) */
{
ser_send(upsfd, "%s%s%s", SETX_BATTERY_DATE, setvalue, COMMAND_END);
dstate_setinfo("battery.date", "%s (yymmdd)", setvalue);
return STAT_SET_HANDLED;
}
else
{
return STAT_SET_UNKNOWN;
}
}
if (!strcasecmp(varname, "ups.delay.start"))
{
if (atoi(setvalue) <= 9999)
{
ser_send(upsfd,"%s%s%s",SETX_RESTART_DELAY, setvalue, COMMAND_END);
dstate_setinfo("ups.delay.start", "%s", setvalue);
return STAT_SET_HANDLED;
}
else
{
return STAT_SET_UNKNOWN;
}
}
if (!strcasecmp(varname, "battery.runtime.low"))
{
if (atoi(setvalue) <= 99)
{
ser_send(upsfd,"%s%s%s",SETX_LOWBATT_AT, setvalue, COMMAND_END);
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
dstate_setinfo("battery.runtime.low", "%s", setvalue);
return STAT_SET_HANDLED;
}
else
{
return STAT_SET_UNKNOWN;
}
}
if (!strcasecmp(varname, "ups.start.auto"))
{
if (!strcasecmp(setvalue, "yes"))
{
ser_send(upsfd,"%c0%s",SETX_AUTO_START, COMMAND_END);
dstate_setinfo("ups.start.auto", "yes");
return STAT_SET_HANDLED;
}
else if (!strcasecmp(setvalue, "no"))
{
ser_send(upsfd,"%c1%s",SETX_AUTO_START, COMMAND_END);
dstate_setinfo("ups.start.auto", "no");
return STAT_SET_HANDLED;
}
2022-07-10 10:23:45 +03:00
2012-06-01 16:55:19 +03:00
return STAT_SET_UNKNOWN;
}
upslogx(LOG_NOTICE, "setcmd: unknown command [%s]", varname);
return STAT_SET_UNKNOWN;
2010-03-26 01:20:59 +02:00
}