antonlyap/nut-debian
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
b2cf727314
nut-debian/docs/solaris-usb.txt

232 lines
9.5 KiB
Plaintext
Raw Normal View History

New upstream version 2.8.0
2022-07-10 10:23:45 +03:00
NUT USB setup in modern Solaris-like systems (OpenSolaris descendants)
======================================================================
Local-media device setup for use with NUT has some nuances with
numerous descendants of the OpenSolaris project, including both
the commercial Sun/Oracle Solaris 11 and illumos-based open source
distributions such as OpenIndiana and OmniOS. Recommendations
below may also apply to other related operating systems, possibly
to older releases as well.
Change the OS driver binding: use UGEN
--------------------------------------
Like other hardware, USB devices are interfaced to the operating
system by OS drivers, and often there are several suitable drivers
with different capabilities. In Solaris and related systems, this
mapping is detailed in the `/etc/driver_aliases` file and properly
managed by dedicated tools. By default, USB devices can be captured
by the generic USB HID driver, or none at all; however an "UGEN"
driver can behave better with the libusb library used on Solaris.
NOTE: Operations below would need running as `root` or elevating
the privileges (via `pfexec`, `sudo`, etc.)
Connect the power device using its USB port to your computer.
Run `prtconf -v | less` to see the details of device connections,
and search for its probable strings (vendor, model, serial number).
Two examples follow:
* In this example, no suitable driver was attached "out of the box":
+
----
:; prtconf -v
...
input (driver not attached)
Hardware properties:
name='driver-minor' type=int items=1
value=00000000
name='driver-major' type=int items=1
value=00000002
name='low-speed' type=boolean
name='usb-product-name' type=string items=1
value='Eaton 9PX'
name='usb-vendor-name' type=string items=1
value='EATON'
name='usb-serialno' type=string items=1
value='G202E02032'
name='usb-raw-cfg-descriptors' type=byte items=34
value=09.02.22.00.01.01.00.a0.0a.09.04.00.00.01.03.00.00.00.09.21.10.01.21.01.22.10.0d.07.05.81.03.08.00.14
name='usb-dev-descriptor' type=byte items=18
value=12.01.10.01.00.00.00.08.63.04.ff.ff.00.01.01.02.04.01
name='usb-release' type=int items=1
value=00000110
name='usb-num-configs' type=int items=1
value=00000001
name='usb-revision-id' type=int items=1
value=00000100
name='usb-product-id' type=int items=1
value=0000ffff
name='usb-vendor-id' type=int items=1
value=00000463
name='compatible' type=string items=9
value='usb463,ffff.100' + 'usb463,ffff' + 'usbif463,class3.0.0' + 'usbif463,class3.0' + 'usbif463,class3' + 'usbif,class3.0.0' + 'usbif,class3.0' + 'usbif,class3' + 'usb,device'
name='reg' type=int items=1
value=00000002
name='assigned-address' type=int items=1
value=00000003
----
* In the following example, a "hid power" driver was attached, giving
some usability to the device although not enough for NUT to interact
well (at least, according to the helpful notes in the
https://web.archive.org/web/20140126045707/http://barbz.com.au/blog/?p=407
blog entry):
+
----
:; prtconf -v
...
input, instance #1
Driver properties:
name='pm-components' type=string items=3 dev=none
value='NAME= hid1 Power' + '0=USB D3 State' + '3=USB D0 State'
Hardware properties:
name='driver-minor' type=int items=1
value=00000000
name='driver-major' type=int items=1
value=00000002
name='low-speed' type=boolean
name='usb-product-name' type=string items=1
value='USB to Serial'
name='usb-vendor-name' type=string items=1
value='INNO TECH'
name='usb-serialno' type=string items=1
value='20100826'
name='usb-raw-cfg-descriptors' type=byte items=34
value=09.02.22.00.01.01.03.80.32.09.04.00.00.01.03.00.00.04.09.21.00.01.00.01.22.1b.00.07.05.81.03.08.00.20
name='usb-dev-descriptor' type=byte items=18
value=12.01.10.01.00.00.00.08.65.06.61.51.02.00.01.02.03.01
name='usb-release' type=int items=1
value=00000110
name='usb-num-configs' type=int items=1
value=00000001
name='usb-revision-id' type=int items=1
value=00000002
name='usb-product-id' type=int items=1
value=00005161
name='usb-vendor-id' type=int items=1
value=00000665
name='compatible' type=string items=9
value='usb665,5161.2' + 'usb665,5161' + 'usbif665,class3.0.0' + 'usbif665,class3.0' + 'usbif665,class3' + 'usbif,class3.0.0' + 'usbif,class3.0' + 'usbif,class3' + 'usb,device'
name='reg' type=int items=1
value=00000003
name='assigned-address' type=int items=1
value=00000005
Device Minor Nodes:
dev=(108,2)
dev_path=/pci@0,0/pci8086,7270@1d/hub@1/input@3:hid_0_1
spectype=chr type=minor
dev_link=/dev/usb/hid0
----
You can also check with `cfgadm` if the device is at least somehow visible
(if not, there can be hardware issues in play). For example, if there is a
physical link but no recognized driver was attached, the device would show
up as "unconfigured":
----
:; cfgadm | grep usb-
usb8/1 usb-input connected unconfigured ok
----
If you conclude that a change is needed, you would need to unload
the existing copy of the "ugen" driver and set it up to handle the
device patterns that you find in 'compatible' values from `prtconf`.
For example, to monitor the devices from listings above, you would run:
----
:; rem_drv ugen
:; add_drv -i '"usb463,ffff.100"' -m '* 0666 root sys' ugen
----
or
----
:; rem_drv ugen
:; add_drv -i '"usb665,5161.2"' -m '* 0666 root sys' ugen
----
Note that there are many patterns in the 'compatible' line which
allow for narrower or wider catchment. It is recommended to match
with the narrowest fit, to avoid potential conflict with other
devices from same vendor (especially if the declared identifiers
are for a generic USB chipset).
Also note that the `add_drv` definition above lists the POSIX access
metadata for the device node files that would be generated when the
device is plugged in and detected. In the examples above, it would
be owned by `root:sys` but accessible for reads and writes (`0666`)
to anyone on the system. On shared systems you may want to constrain
this access to the account that the NUT driver would run as.
After proper driver binding, `cfgadm` should expose the details:
----
# cfgadm -lv
...
usb8/1 connected configured ok
Mfg: EATON Product: Eaton 9PX NConfigs: 1 Config: 0 <no cfg str descr>
unavailable usb-input n /devices/pci@0,0/pci103c,1309@1d,2:1
...
----
Usually the driver mapping should set up the "friendly" device nodes
under `/dev/` tree as well (symlinks to real entries in `/devices/`)
so for NUT drivers you would specify a `port=/dev/usb/463.ffff/0` for
your new driver section in `ups.conf`.
NOTE: As detailed in link:config-notes.txt[], the "natively USB" drivers
(including `usbhid-ups` and `nutdrv_qx`) match the device by ID and/or
strings it reports, and so effectively require but ignore the `port`
option -- so it is commonly configured as `port=auto`.
Drivers used for SHUT or serial protocols do need the device path.
For some serial-to-USB converter chips however it was noted that while
the device driver is attached, and the `/device/...` path is exposed
in the `dmesg` output (saved to `/var/adm/messages`) the `/dev/...`
symlinks are not created. In this case you can pass the low-level
name of the character-device node as the "port" option, e.g.:
----
./mge-shut -s 9px-ser -DDDDD -d2 -u root \
-x port=/devices/pci@0,0/pci103c,1309@1a,2/device@1:0
----
libusb version and binary
-------------------------
Until NUT release 2.7.4 the only option to build NUT drivers for
USB connectivity was to use libusb-0.1 or a distribution's variant
of it; the original Sun Solaris releases and later related systems
provided their customized version for example (packaged originally
as `SUNWlibusbugen`, `SUNWugen{,u}` and `SUNWusb{,s,u,vc}`).
However, libusb-0.1 consuming programs had some stability issues
reported when running with long-term connections to devices (such
as an UPS), especially when using USB hubs and chips where hardware
vendors had cut a few corners too many, which were addressed in a
newer rewrite of the library as libusb-1.0.
Subsequently just as at least the illumos-based distributions evolved to
include the new library and certain patches for it, and the library
itself matured, the NUT project also added an ability to build with
libusb-1.0 either directly or using its 0.1-compat API (available since
NUT 2.8.0 release).
If your "standard" build of NUT has problems connecting to your USB UPS
(libusb binary variant should be visible in driver debug messages),
consider re-building NUT from source with the other option using the
recent library build as available for your distribution.
In this context, note the OpenIndiana libusb-1 package pull requests
with code which was successfully used when developing this documentation:
* https://github.com/OpenIndiana/oi-userland/pull/5382
* (TO CHECK) https://github.com/OpenIndiana/oi-userland/pull/5277
Binaries from builds made in OpenIndiana using the recipe from
https://github.com/OpenIndiana/oi-userland/pull/5382[PR #5382]
above were successfully directly used on contemporary OmniOS CE as well.
Reference in New Issue Copy Permalink