89 lines
2.2 KiB
Plaintext
89 lines
2.2 KiB
Plaintext
|
BCMXCP(8)
|
||
|
|
=========
|
||
|
|
|
||
|
|
NAME
|
||
|
|
----
|
||
|
|
|
||
|
|
bcmxcp - Driver for UPSes supporting the serial BCM/XCP protocol
|
||
|
|
|
||
|
|
NOTE
|
||
|
|
----
|
||
|
|
This man page only documents the hardware-specific features of the
|
||
|
|
bcmxcp driver. For information about the core driver, see
|
||
|
|
linkman:nutupsdrv[8].
|
||
|
|
|
||
|
|
SUPPORTED HARDWARE
|
||
|
|
------------------
|
||
|
|
This driver should recognize all serial BCM/XCP-compatible UPSes. It has
|
||
|
|
been developed and tested on Powerware PW5115 and PW9120 hardware. If your UPS
|
||
|
|
has a USB connection, you may also consult the linkman:bcmxcp_usb[8] driver
|
||
|
|
documentation.
|
||
|
|
|
||
|
|
EXTRA ARGUMENTS
|
||
|
|
---------------
|
||
|
|
This driver supports the following optional settings in the
|
||
|
|
linkman:ups.conf[5].
|
||
|
|
|
||
|
|
*shutdown_delay=*'delay'::
|
||
|
|
The number of seconds that the UPS should wait between receiving the
|
||
|
|
shutdown command (`upsdrvctl shutdown`) and actually shutting off.
|
||
|
|
|
||
|
|
*baud_rate=*'rate'::
|
||
|
|
Communication speed for the UPS. If this is set to 9600, it tries to connect
|
||
|
|
to the UPS at 9600bps. If it fails to communicate, it will go into baud-hunting.
|
||
|
|
It starts at 1200 and goes up to 19200. If it succeeds, it tell you the speed it
|
||
|
|
connected with. If not included in the config, it defaults to baud-hunting.
|
||
|
|
|
||
|
|
DEFAULT VALUES FOR THE EXTRA ARGUMENTS
|
||
|
|
--------------------------------------
|
||
|
|
- *shutdown_delay =* '120'
|
||
|
|
- *baud_rate =* 'none'
|
||
|
|
|
||
|
|
INSTANT COMMANDS
|
||
|
|
----------------
|
||
|
|
This driver supports the following Instant Commands:
|
||
|
|
|
||
|
|
*shutdown.return*::
|
||
|
|
Turn off the load and return when power is back.
|
||
|
|
|
||
|
|
*shutdown.stayoff*::
|
||
|
|
Turn off the load and remain off.
|
||
|
|
|
||
|
|
*test.battery.start*::
|
||
|
|
Start a battery test.
|
||
|
|
|
||
|
|
*outlet.n.shutdown.return*::
|
||
|
|
Turn off the load on outlet 'n' and return when power is back.
|
||
|
|
('n' is the outlet number reported by the upsc command)
|
||
|
|
|
||
|
|
TODO LIST
|
||
|
|
---------
|
||
|
|
|
||
|
|
Report UPS statistics informations::
|
||
|
|
BCM/XCP supports reporting of UPS statistics data.
|
||
|
|
|
||
|
|
Change settings::
|
||
|
|
Access the config register to change settings.
|
||
|
|
|
||
|
|
BUGS
|
||
|
|
----
|
||
|
|
None known.
|
||
|
|
|
||
|
|
AUTHOR
|
||
|
|
------
|
||
|
|
Tore Ørpetveit <tore@orpetveit.net>
|
||
|
|
|
||
|
|
SEE ALSO
|
||
|
|
--------
|
||
|
|
The core driver:
|
||
|
|
~~~~~~~~~~~~~~~~
|
||
|
|
linkman:nutupsdrv[8]
|
||
|
|
|
||
|
|
The USB BCM/XCP driver:
|
||
|
|
~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
|
linkman:bcmxcp_usb[8]
|
||
|
|
|
||
|
|
Internet resources:
|
||
|
|
~~~~~~~~~~~~~~~~~~~
|
||
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|