50 lines
1.2 KiB
Plaintext
50 lines
1.2 KiB
Plaintext
|
LIEBERT(8)
|
||
|
|
==========
|
||
|
|
|
||
|
|
NAME
|
||
|
|
----
|
||
|
|
|
||
|
|
liebert - Driver for Liebert contact-closure UPS equipment
|
||
|
|
|
||
|
|
NOTE
|
||
|
|
----
|
||
|
|
This man page only documents the hardware-specific features of the
|
||
|
|
liebert driver. For information about the core driver, see
|
||
|
|
linkman:nutupsdrv[8].
|
||
|
|
|
||
|
|
SUPPORTED HARDWARE
|
||
|
|
------------------
|
||
|
|
This driver supports some Liebert UPS equipment with a contact-closure
|
||
|
|
interface. This includes the UPStation GXT2 with their contact-closure
|
||
|
|
cable. The smart mode ("Multilink") cable is not supported by this
|
||
|
|
driver.
|
||
|
|
|
||
|
|
EXTRA ARGUMENTS
|
||
|
|
---------------
|
||
|
|
|
||
|
|
This driver does not support any extra settings in the
|
||
|
|
linkman:ups.conf[5].
|
||
|
|
|
||
|
|
BUGS
|
||
|
|
----
|
||
|
|
|
||
|
|
This driver does not yet support shutdowns by raising DTR. Be aware
|
||
|
|
that shutdowns are not possible with the stock contact-closure cable.
|
||
|
|
You may have to build another cable with DTR connected through to the
|
||
|
|
UPS for it to work.
|
||
|
|
|
||
|
|
There is no way for this driver to detect the hardware or cable. It
|
||
|
|
will start up successfully even if no UPS is present. This is a
|
||
|
|
fundamental limitation of any contact-closure driver.
|
||
|
|
|
||
|
|
SEE ALSO
|
||
|
|
--------
|
||
|
|
|
||
|
|
The core driver:
|
||
|
|
~~~~~~~~~~~~~~~~
|
||
|
|
linkman:nutupsdrv[8]
|
||
|
|
|
||
|
|
Internet resources:
|
||
|
|
~~~~~~~~~~~~~~~~~~~
|
||
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|