nut-debian/docs/man/richcomm_usb.txt

58 lines
1.4 KiB
Plaintext
Raw Normal View History

2011-01-26 11:35:08 +02:00
RICHCOMM_USB(8)
===============
NAME
----
2022-07-10 10:23:45 +03:00
2011-01-26 11:35:08 +02:00
richcomm_usb - Driver UPS equipment using Richcomm dry-contact to USB
solution
NOTE
----
2022-07-10 10:23:45 +03:00
This man page only documents the specific features of the richcomm_usb
2011-01-26 11:35:08 +02:00
driver. For information about the core driver, see linkman:nutupsdrv[8].
SUPPORTED HARDWARE
------------------
2022-07-10 10:23:45 +03:00
2011-01-26 11:35:08 +02:00
The Richcomm dry-contact to USB solution is a generic interface that is
used to upgrade an existing (RS-232) contact closure UPS interface to USB.
As such, all the limitations of the underlying contact closure interface
apply. This means that you will only get the essentials in ups.status: OL,
OB, and LB. See also linkman:genericups[8].
BUGS
----
2022-07-10 10:23:45 +03:00
Most contact-closure UPSes will not power down the load if the line power
is present. This can create a race when using secondary linkman:upsmon[8]
2011-01-26 11:35:08 +02:00
systems. See the linkman:upsmon[8] man page for more information.
2022-07-10 10:23:45 +03:00
The solution to both of these problems is to upgrade to a smart protocol
2011-01-26 11:35:08 +02:00
UPS of some kind that allows detection and proper load cycling on command.
AUTHORS
-------
2022-07-10 10:23:45 +03:00
* Peter van Valderen <p.v.valderen at probu.nl>
* Dirk Teurlings <dirk at upexia.nl>
2011-01-26 11:35:08 +02:00
SEE ALSO
--------
The core driver:
~~~~~~~~~~~~~~~~
2022-07-10 10:23:45 +03:00
2011-01-26 11:35:08 +02:00
linkman:nutupsdrv[8]
The generic serial driver:
~~~~~~~~~~~~~~~~~~~~~~~~~~
2022-07-10 10:23:45 +03:00
2011-01-26 11:35:08 +02:00
linkman:genericups[8]
Internet resources:
~~~~~~~~~~~~~~~~~~~
2022-07-10 10:23:45 +03:00
2011-01-26 11:35:08 +02:00
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/